View
17
Download
0
Category
Preview:
Citation preview
DataMan® Configuration Codes
9/22/2015Version 5.6.0
Legal NoticesThe software described in this document is furnished under license, and may be used or copied only in accordance withthe terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, thisdocument, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee.Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumesno responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation.Cognex Corporation makes no warranties, either express or implied, regarding the described software, itsmerchantability, non-infringement or its fitness for any particular purpose.
The information in this document is subject to change without notice and should not be construed as a commitment byCognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document orthe associated software.
Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this documentmay be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nortransferred to any other media or language without the written permission of Cognex Corporation.
Copyright © 2015. Cognex Corporation. All Rights Reserved.
Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, aswell as pending U.S. and foreign patents listed on the Cognex web site at: http://www.cognex.com/patents.
The following are registered trademarks of Cognex Corporation:
Cognex, 2DMAX, Advantage, Alignplus, Assemblyplus, Check it with Checker, Checker, Cognex Vision for Industry,Cognex VSOC, CVL, DataMan, DisplayInspect, DVT, EasyBuilder, Hotbars, IDMax, In-Sight, Laser Killer, MVS-8000,OmniView, PatFind, PatFlex, PatInspect, PatMax, PatQuick, SensorView, SmartView, SmartAdvisor, SmartLearn,UltraLight, Vision Solutions, VisionPro, VisionView
The following are trademarks of Cognex Corporation:
The Cognex logo, 1DMax, 3D-Locate, 3DMax, BGAII, CheckPoint, Cognex VSoC, CVC-1000, FFD, iLearn, In-Sight(design insignia with cross-hairs), In-Sight 2000, InspectEdge, Inspection Designer, MVS, NotchMax, OCRMax,PatMax RedLine, ProofRead, SmartSync, ProfilePlus, SmartDisplay, SmartSystem, SMD4, VisiFlex, Xpand
Other product and company trademarks identified herein are the trademarks of their respective owners.
2
Legal Notices
Table of ContentsLegal Notices 2Table of Contents 3Configuration Codes 5Product Settings 6Reset 7Diagnostics 8Setup 9Light Aimer 10Trigger Type 11Global Shutter Emulation 12Custom Commands 13Maximum Exposure 14Symbology Settings 172D Symbology Settings 25QR Code Maximum Grid Size 271D Symbology Settings 29Training 31Data Validation / Data Formatting 32Non-Printable Characters 34Wireless 35Buffering 36Power Management 37Wake-up Message 38PS/2 Keyboard Emulation Enable 39Mobile Computer Keyboard Emulation 40ASCII Keyboard Command Codes 41USB Connection 52USB Mode 54Communication Settings 56RS-232 Baud Rate 60RS-232 Parity Settings 62
3
Table of Contents
RS-232 Databit Settings 64RS-232 Stopbit Settings 65RS-232 Handshaking 66RS-232 Routing 67Network Settings 68Decode Settings 69Master / Slave 70Keyboard Country 71Alt Key Combo Zero Padding 74USB Keyboard Inter-Character Delay 75Code Quality Settings 76
4
Table of Contents
Configuration CodesConfiguration Codes are special Data Matrix codes to configure your reader without the DataMan Setup Tool. Lights andbeeping indicate that a Configuration Code was read. Beeps can also indicate that a command has not been executed: ifthe code is read but the command is not executed (e.g. because of the command not being valid for the type of readerused for reading the code), the reader gives 2 beeps.
You can read these codes without enabling the decoding of Data Matrix symbols. In such cases, make sure that you useManual or Presentation trigger mode.
Adjust focus settings if you have trouble reading Configuration Codes.
Note: When using wireless handheld readers, the reader must be put on the base station for security reasons afterreading a printed configuration code.
5
Configuration Codes
Product Settings
Reset Scanner to Factory Defaults
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Reset Code Quality Calibration
DM100
Reset Base Station to Factory Defaults
DM8000Base
6
Product Settings
Reset
Reboot Scanner
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Reboot Base Station
DM8000Base
7
Reset
Diagnostics
Output Diagnostic String(only with RS-232 and USB connections)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Output Diagnostic String(through the DM8000 Base Station with RS-232 and USB
connections)
DM8000 wireless
8
Diagnostics
Setup
Enable Setup 1 Only
DM8500 ● DM8600 ● DM9050 ● DM9500
Enable Setup 2 Only
DM8500 ● DM8600 ● DM9050 ● DM9500
Enable Setup 3 Only
DM8500 ● DM8600 ● DM9050 ● DM9500
Enable Setup 4 Only
DM8500 ● DM8600 ● DM9050 ● DM9500
9
Setup
Light Aimer
*Light aimer ON(default for DMAE50, DM50, DM60, DM100, DM200, and
DM8000)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM8000 ● DM9050 ● DM9500
*Light aimer OFF(default for DM300)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM8000 ● DM9050 ● DM9500
10
Light Aimer
Trigger Type
Enable Presentation
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Enable Manual (button)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Single (external)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
Enable Burst (external)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM500● DM503
Enable Self (internal)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
Enable Continuous (external)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM500● DM503
11
Trigger Type
Global Shutter Emulation
Enable Global Shutter Emulation
DMAE50
*Disable Global Shutter Emulation
DMAE50
12
Global Shutter Emulation
Custom Commands
Enable Serial Trigger
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM503
*Disable Serial Trigger
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
Enable Echo Commands
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
*Disable Echo Commands
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
13
Custom Commands
Maximum Exposure
100 µs
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 ● DM9050 ● DM9500
133 µs
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 ● DM9050 ● DM9500
*170 µs
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 ● DM9050 ● DM9500
250 µs
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360●DM503 ● DM8000 ● DM9050 ● DM9500
500 µs
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360●DM503 ● DM8000 ● DM9050 ● DM9500
14
Maximum Exposure
800 µs
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 ● DM9050 ● DM9500
*1000 µs(default for DM50, DM60, DM300, DM360, and DM503)
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 ● DM9050 ● DM9500
2000 µs
DM50 ● DM60● DM503 ● DM8000 ● DM9050 ● DM9500
5000 µs
DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500
8000 µs
DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500
10000 µs
DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500
15
Maximum Exposure
*13333 µs(default for DM8000)
DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500
20000 µs
DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500
25000 µs
DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500
16
Maximum Exposure
Symbology Settings
*Enable ID Max
DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ●DM300 ● DM360 ● DM503
Enable ID Quick
DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ●DM300 ● DM360 ● DM503
*Enable Data Matrix
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Disable Data Matrix
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable QR Code
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
17
Symbology Settings
*Disable QR Code
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable MaxiCode
DM50 ● DM60 ● DM300 ● DM500 ● DM503
*Disable MaxiCode
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8050 ● DM8600
Enable Aztec Code
DM150 ● DM260 ● DM300 ● DM360● DM503 ● DM8050 ●DM8600
*Disable Aztec Code
DM150 ● DM260 ● DM300 ● DM360● DM503 ● DM8050 ●DM8600
*Enable Code 128
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
18
Symbology Settings
Disable Code 128
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Enable UPC/EAN
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Disable UPC/EAN
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Enable Code 39
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Disable Code 39
DMAE50 ● DM50 ● DM60 ● M100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Enable Code 93
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
19
Symbology Settings
Disable Code 93
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Interleaved 2 of 5
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000
*Disable Interleaved 2 of 5
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Enable Codabar
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Disable Codabar
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Pharmacode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
20
Symbology Settings
*Disable Pharmacode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Enable PDF417(default for handheld readers)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable PDF417(default for fixed-mount readers)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Databar
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable Databar
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Micro PDF417
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
21
Symbology Settings
*Disable Micro PDF417
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM500● DM503 ● DM700 ●
DM8000 ● DM9050 ● DM9500
Enable EAN.UCC Composite
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable EAN.UCC Composite
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable POSTNET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable POSTNET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable PLANET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
22
Symbology Settings
*Disable PLANET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Japan Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable Japan Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Australia Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable Australia Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable UPU
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
23
Symbology Settings
*Disable UPU
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Intelligent Mail Barcode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable Intelligent Mail Barcode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
24
Symbology Settings
2D Symbology Settings
Enable Extreme Print Growth(Data Matrix only)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8100 ● DM8500● DM9050 ● DM9500
*Disable Extreme Print Growth(Data Matrix only)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8100 ● DM8500● DM9050 ● DM9500
DataMatrix Symbol Difficulty - Easy
DM8100 ● DM8500 ● DM8600
*DataMatrix Symbol Difficulty - Medium
DM8100 ● DM8500 ● DM8600
DataMatrix Symbol Difficulty - Hard
DM8100 ● DM8500 ● DM8600
25
2D Symbology Settings
*QR Symbol Difficulty - Easy
DM8100 ● DM8500 ● DM8600
QR Symbol Difficulty - Medium
DM8100 ● DM8500 ● DM8600
QR Symbol Difficulty - Hard
DM8100 ● DM8500 ● DM8600
26
2D Symbology Settings
QR Code Maximum Grid Size
*Version 8 (49x49)
DMAE50 ● DM50 ● DM60 ● DM150 ● DM260 ● DM30x●DM503 ● DM8500 ● DM9050 ● DM9500 ● DM8600 ●
DM8050
Version 9 (53x53)
DMAE50 ● DM50 ● DM60 ● DM150 ● DM260 ● DM30x●DM503 ● DM8500 ● DM9050 ● DM9500 ● DM8600 ●
DM8050
Version 10 (57x57)
DMAE50 ● DM50 ● DM60 ● DM150 ● DM260 ● DM30x●DM503 ● DM8500 ● DM9050 ● DM9500 ● DM8600 ●
DM8050
Version 12 (65x65)
DMAE50 ● DM50 ● DM60 ● DM150 ● DM260 ● DM30x●DM503 ● DM8500 ● DM9050 ● DM9500 ● DM8600 ●
DM8050
Version 16 (81x81)
DMAE50 ● DM50 ● DM60 ● DM150 ● DM260 ● DM30x●DM503 ● DM8500 ● DM9050 ● DM9500 ● DM8600 ●
DM8050
27
QR Code Maximum Grid Size
Version 20 (97x97)
DMAE50 ● DM50 ● DM60 ● DM150 ● DM260 ● DM30x●DM503 ● DM8500 ● DM9050 ● DM9500 ● DM8600 ●
DM8050
Version 40 (177x177)
DMAE50 ● DM50 ● DM60 ● DM150 ● DM260 ● DM30x●DM503 ● DM8500 ● DM9050 ● DM9500 ● DM8600 ●
DM8050
28
QR Code Maximum Grid Size
1D Symbology Settings
*Enable Use Target Decoding(simulates laser scanning)
(default for handheld readers except for DM8000)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8000 ● DM9050● DM9500
*Disable Use Target Decoding(simulates laser scanning)
(default for fixed mount readers, DM8000, 9050 andDM9500)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8000 ● DM9050● DM9500
*Enable Short Quiet Zone
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Disable Short Quiet Zone
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000
Code Orientation: Omnidirectional
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503
29
1D Symbology Settings
Code Orientation: Ladder and Picket Fence
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503
Code Orientation: Ladder
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM500● DM503
Code Orientation: Picket Fence(for readers which support oriented 1-D reading)
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503
30
1D Symbology Settings
Training
Enable incremental training
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
*Disable incremental training
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
Enable untrained symbologies
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
*Disable untrained symbologies
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503
31
Training
Data Validation / Data Formatting
Enable DoD UID Validation with UII Output
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable DoD UID Validation with UII Output
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Use Next Code As Match String(Enable Match String Validation prior to reading this code)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
Enable Input 1 Save Match String
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503
*Disable Input 1 Save Match String
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503
32
Data Validation / Data Formatting
Enable Button Save Match String
DM150 ● DM260 ● DM300 ● DM360 ● DM503
*Disable Button Save Match String
DM150 ● DM260 ● DM300 ● DM360 ● DM503
33
Data Validation / Data Formatting
Non-Printable Characters
Enable Translate Unprintable Characters
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable Translate Unprintable Characters
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
34
Non-Printable Characters
Wireless
Unassign Reader from Base Station
DM8000
Force Pairing Mode
DM8050, DM8600
35
Wireless
Buffering
*Enable Offline Buffering
DM8000 Wireless ● DM9050 ● DM9500
Disable Offline Buffering
DM8000 Wireless ● DM9050 ● DM9500
*Offline Buffering Mode - Multiple
DM8000 Wireless
Offline Buffering Mode - Single
DM8000 Wireless
36
Buffering
Power Management
Disable Hibernation Mode
DM8000 Wireless ● DM9050 ● DM9500
*Enable Hibernation Mode
DM8000 Wireless ● DM9050 ● DM9500
Disable Power Off Mode
DM8000 Wireless ● DM9050 ● DM9500
Enable Power Off Mode
DM8000 Wireless ● DM9050 ● DM9500
37
Power Management
Wake-up Message
Enable Output Diagnostic String on Wake-up
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
*Disable Output Diagnostic String on Wake-up
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●
DM9050 ● DM9500
38
Wake-up Message
PS/2 Keyboard Emulation Enable
PS/2 Keyboard Emulation Enable
DM50 ● DM700 ● DM8000DO NOT SCAN this code when you have an actual
keyboard connected.
*PS/2 Keyboard Emulation Disable
DM50 ● DM700 ● DM8000
Base Station PS/2 Keyboard Emulation Enable
DM8000BaseDO NOT SCAN this code when you have an actual
keyboard connected.
Base Station PS/2 Keyboard Emulation Disable
DM8000Base
39
PS/2 Keyboard Emulation Enable
Mobile Computer Keyboard Emulation
Mobile Computer Keyboard Emulation Enable
DM9050 ● DM9500
*Mobile Computer Keyboard Emulation Disable
DM9050 ● DM9500
40
Mobile Computer Keyboard Emulation
ASCII Keyboard Command Codes1. Set the data formatting on the DataMan to "Full String".
2. Put the reader into keyboard mode and scan the code. The DataMan will execute this command.
ENTERmain ENTER, not numeric keypad ENTER
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ESCAPE
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
BACKSPACE
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
TAB
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Aspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Bspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Cspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Dspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Especifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Fspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
41
ASCII Keyboard Command Codes
ALT+Gspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Hspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Ispecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Jspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Kspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Lspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Mspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Nspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Ospecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Pspecifically the left ALT ke
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Qspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
42
ASCII Keyboard Command Codes
ALT+Rspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Sspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Tspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Uspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Vspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Wspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Xspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Yspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+Zspecifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
PRINTSCREEN
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F1
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
43
ASCII Keyboard Command Codes
F2
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F3
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F4
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F5
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F6
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F7
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F8
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F9
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F10
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
HOME
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ARROWUP
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
44
ASCII Keyboard Command Codes
PAGE UP
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ARROW LEFT
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ARROWRIGHT
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
END
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ARROWDOWN
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
PAGE DOWN
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
INSERT
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
DELETE
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
GUI LEFT
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
GUI RIGHT
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F1specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
45
ASCII Keyboard Command Codes
ALT+F2specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F3specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F4specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F5specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F6specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F7specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F8specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F9specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F10specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F11
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
F12
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
46
ASCII Keyboard Command Codes
ALT+F11specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+F12specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ALT+ENTERspecifically the left ALT key and main ENTER
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Aspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Bspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Cspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Dspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Especifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Fspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Gspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Hspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
47
ASCII Keyboard Command Codes
CTRL+Ispecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Jspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Kspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Lspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Mspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Nspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Ospecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Pspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Qspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Rspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Sspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
48
ASCII Keyboard Command Codes
CTRL+Tspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Uspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Vspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Wspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Xspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Yspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+Zspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F1specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F2specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F3specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F4specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
49
ASCII Keyboard Command Codes
CTRL+F5specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F6specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F7specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F8specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F9specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F10specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F11specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+F12specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRL+ENTERspecifically the right CTRL key and main ENTER
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
CTRLspecifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F1specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
50
ASCII Keyboard Command Codes
SHIFT+F2specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F3specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F4specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F5specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F6specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F7specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F8specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F9specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F10specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F11specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+F12specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
SHIFT+ENTERspecifically the left SHIFT key and main ENTER
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
51
ASCII Keyboard Command Codes
USB Connection
*USB-COM/RS-232
DMAE50 ● DM50 ● DM60 ● DM100 ● DM700 ● DM8000
USB Keyboard
DMAE50 ● DM50 ● DM60 ● DM100 ● DM700 ● DM8000
Enable USB Keyboard for the base station
Reboot needed for enabling USB keyboard for the basestation!
DM8000Base
*Disable USB Keyboard for the base station
Reboot needed after disabling USB keyboard for the basestation!
DM8000Base
Enable ‘Enumerate in HID mode only’
Reboot needed for changing between HID and USB modeof base/reader!
DM8000Base
52
USB Connection
Disable ‘Enumerate in HID mode only’
Reboot needed for changing between HID and USB modeof base/reader!
DM8000Base
*Enable Base USB
Reader switches to USB when in the base.
DM8000Base
Disable Base USB
Reader keeps up WiFi even when in the base.
DM8000Base
Enable Re-enumeration on Firmware Start
DM50 ● DM60 ● DM150
Disable Re-enumeration on Firmware Start
DM50 ● DM60 ● DM150
53
USB Connection
USB Mode
USB compatibility mode enabled
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
*USB compatibility mode disabled
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
USB compatibility mode enabled
DM8000Base
USB compatibility mode disabled
DM8000Base
USB 2.0 mode
DM8000
54
USB Mode
*USB 1.1 mode
DM8000
USB 2.0 mode on base station
DM8000Base
*USB 1.1 mode on base station
DM8000Base
55
USB Mode
Communication Settings
*Enable DHCP(default for all Ethernet readers)
DMAE50 ● DM60 ● DM150 ● DM200 ● DM260 ● DM300 ●DM360 ● DM503 ● DM8000
DO NOT SCAN this code with a DM8000 wireless reader!
Enable Multi-Port (RS-232 Sharing)
DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ●DM300 ● DM360 ● DM503
*Disable Multi-Port (RS-232 Sharing)
DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ●DM300 ● DM360 ● DM503
Enable EtherNet/IP
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
Enable EtherNet/IP
DM8000Base (DM8000 wireless)
56
Communication Settings
*Disable EtherNet/IP
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
*Disable EtherNet/IP
DM8000Base (DM8000 wireless)
Enable PROFINET
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
Enable PROFINET
DM8000Base (DM8000 wireless)
*Disable PROFINET
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
*Disable PROFINET
DM8000Base (DM8000 wireless)
57
Communication Settings
Enable SLMP Protocol
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
Enable SLMP Protocol
DM8000Base (DM8000 wireless)
*Disable SLMP Protocol
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
*Disable SLMP Protocol
DM8000Base (DM8000 wireless)
Enable Modbus TCP
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
Enable Modbus TCP
DM8000Base (DM8000 wireless)
58
Communication Settings
*Disable Modbus TCP
DM60 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000 (corded)
*Disable Modbus TCP
DM8000Base (DM8000 wireless)
59
Communication Settings
RS-232 Baud Rate
9600 BPS
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000
(corded)
9600 BPS
DM8000Base (DM8000 wireless)
19200 BPS
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000
(corded)
19200 BPS
DM8000Base (DM8000 wireless)
38400 BPS
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000
(corded)
60
RS-232 Baud Rate
38400 BPS
DM8000Base (DM8000 wireless)
*57600 BPS(default for DMAE50, DM300, DM360 and DM8000)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000
(corded)
57600 BPS
DM8000Base (DM8000 wireless)
*115200 BPS(default for DM50, DM60, DM100, DM200, DM503, and
DM700)
DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ●DM300 ● DM360 ● DM503 ● DM700 ● DM8050 ● DM8600
61
RS-232 Baud Rate
RS-232 Parity Settings
None
All readers
None
DM8000Base (DM8000 wireless)
Odd
All readers
Odd
DM8000Base (DM8000 wireless)
Even
All readers
62
RS-232 Parity Settings
Even
DM8000Base (DM8000 wireless)
Mark
DM8050 ● DM8600
Mark
DM8000Base (DM8000 wireless)
Space
DM8050 ● DM8600
Space
DM8000Base (DM8000 wireless)
63
RS-232 Parity Settings
RS-232 Databit Settings
Databit 7
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Databit 7
DM8000Base (DM8000 wireless)
Databit 8
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Databit 8
DM8000Base (DM8000 wireless)
64
RS-232 Databit Settings
RS-232 Stopbit Settings
Stopbit 1
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Stopbit 1
DM8000Base (DM8000 wireless)
Stopbit 2
DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ●DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Stopbit 2
DM8000Base (DM8000 wireless)
65
RS-232 Stopbit Settings
RS-232 Handshaking
*RTS/CTS Off
DMAE50 ● DM7500 ● DM8000 (corded)
RTS/CTS Off
DM8000Base (DM8000 wireless)
RTS/CTS On
DMAE50 ● DM7500 ● DM8000 (corded)
RTS/CTS On
DM8000Base (DM8000 wireless)
66
RS-232 Handshaking
RS-232 Routing
*Route to associated reader
DM8000 (wireless)
Route to base station
DM8000 (wireless)
67
RS-232 Routing
Network Settings
Enable Network Client
DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ●DM8000
*Disable Network Client
DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ●DM8000
68
Network Settings
Decode Settings
*Never Read the Same Code Twice Off
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000
Never Read the Same Code Twice On
DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ●DM503 ● DM8000
69
Decode Settings
Master / Slave
Enable MST
DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503
*Disable MST
DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503
Select Reader as Master
DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503
Deselect Reader as Master
DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503
70
Master / Slave
Keyboard Country
*USA
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
*USA
DM8000Base (DM8000 wireless)
Germany
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Germany
DM8000Base (DM8000 wireless)
France
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
71
Keyboard Country
France
DM8000Base (DM8000 wireless)
Spain
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Spain
DM8000Base (DM8000 wireless)
Japan
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Japan
DM8000Base (DM8000 wireless)
Norway
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
72
Keyboard Country
Norway
DM8000Base (DM8000 wireless)
Finland
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Finland
DM8000Base (DM8000 wireless)
Alt Key Combo
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Alt Key Combo
DM8000Base (DM8000 wireless)
73
Keyboard Country
Alt Key Combo Zero Padding
*Enable Alt Key Combo Zero Padding
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
*Enable Alt Key Combo Zero Padding
DM8000Base (DM8000 wireless)
Disable Alt Key Combo Zero Padding
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Disable Alt Key Combo Zero Padding
DM8000Base (DM8000 wireless)
74
Alt Key Combo Zero Padding
USB Keyboard Inter-Character Delay
*100 ms OFF
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
100 ms ON
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
*0 ms OFF
DM8000Base
100 ms ON
DM8000Base
75
USB Keyboard Inter-Character Delay
Code Quality Settings
Code Quality On
DM100
*Code Quality Off
DM100
*Enable Bright Field – Diffuse Perpendicular (90)
DM100
Disable Bright Field – Diffuse Perpendicular (90)
DM100
*Enable Dark Field – 30 Degree All Quadrants (30Q)
DM100
76
Code Quality Settings
Disable Dark Field – 30 Degree All Quadrants (30Q)
DM100
*Enable Dark Field – 30 Degree E-W Quadrants (30T)
DM100
Disable Dark Field – 30 Degree E-W Quadrants (30T)
DM100
*Enable Dark Field – 30 Degree N-S Quadrants (30T)
DM100
Disable Dark Field – 30 Degree N-S Quadrants (30T)
DM100
Enable Custom Light Configuration
DM100
77
Code Quality Settings
*Disable Custom Light Configuration
DM100
* - Default setting
78
Code Quality Settings
Recommended