Radio Controlled Jeep Chris Venditti Chris Ayoub Daniel Girgis Jonathan Avalishvili Paul Grobelny...

Radio Controlled JeepRadio Controlled Jeep

Chris Venditti Chris Ayoub Daniel Girgis Jonathan Avalishvili Paul Grobelny Saiff Ezeldin

Technical Specs.Technical Specs.

• • Chassis: WR-02• • Scale: 1/10• • Front Tread• • Rear Tread• • Chassis: ABS Monocoque• • Suspension: 4 wheel independent• • Damper Type: Plastic coil over friction• • Drive Train: 2WD gearbox• • Gear Ratio• • Differential Type: Bevel Gear• • Motor Included: Electric type 540• • Speed Controller Included: 3 Step F&R Mechanical• • Wheel/Tire Type: Chrome/V-Lug Pattern• • Body Included: Styrene body is molded in a military green color• • Radio Type: 2-Channel Surface• • Battery Type: 7.2V Battery

ChallengesChallenges

• Intricate small connections

• Multiple gear assembly

• Complex A-arm geometry

• Synchronizing suspension systems

FrameworkFramework

• Anchor to all parts• Default section for assembly• Includes main chassis and transmission

SuspensionSuspension

• 4 wheel independent system• Plastic coil over friction shocks• Assembled using pin and cylinder connections

Suspension in MotionSuspension in Motion

TransmissionTransmission

• Outer casing houses motor and gears• Most complex assembly due to multiple gear

connections and relations. • Drives the vehicle• Rear wheel drive

Transmission and GearsTransmission and Gears

SteeringSteering

• High torque steering servo• Front wheel steering • Ball joint connections between front steering

knuckle and servo saver

Steering MechanismSteering Mechanism

Final AssemblyFinal Assembly

• Combining all working assemblies• A-arms use pin connections• Shocks use pin and cylinders• Transmission use rigid connection

• Driveshaft use Bearings

• All parts in working order

Finished ProductFinished Product

Jeep in MotionJeep in Motion