Qlever software New software from TMI-Orion

QLEVER software

Acquisition,

Analysis,

Technical data management

Logiciel QLEVER

Visualisation of measurement raw data,

calculations on the data

creation of technical reports.

QLEVER

Options for specific needs

Ceramics

Health care

Pharmacy 21CFR

Etc…

File managementA simple interface enables an ergonomic management of your files:

File managementAll your calibration files easily visible with their update time and date

Configuration Chose your language

(English, French, Chinese, Japanese, German, Italian and Spanish)

Configuration Configuration menu

enables:

Selection of communication ports,

Selection of measurement units,

Calibration files management.

Communication ports The available communication ports can be selected with all kind

of communication interface.

Logger management Possibility of using various ports and all kind of interfaces during

the same recording.

All logger types can be used simultaneously.

Logger management A single window to view validity of calibration files and loggers status (recording,

misconnected...)

Automatic update of the window in case of change of a logger status.

Possibility to install a calibration file without leaving the window.

Possibility to know the technical status of each logger (S/N, battery, fonctionnality….)

Programming

Programming Visualisation of the loggers which will be set up and the ones that

will not be for dysfunction.

A dysfunctionning logger does not prevent setting up and starting the others.

Possibility to apply different setups (start date, acquisition frequency…) to each logger.

Start

In some cases, it is possible to :

Postpone the recording start on several radio loggers,

Start recording without calibration file.

Reading loggers Possibility to stop each logger separately.

Possibility to concatenate several recordings of the same logger.

ReadingThree types of results on the same screen : graphical, analytic, statistical

Reading Numerous possibilities

of graphical analysis (zoom, cursor, limits, scales, etc…).

Superposition of curves saving every acquisition points.

Possibility to stack up windows while reading them by transparency.

Reading

ReadingScreen capture and exportation

Reading

Zoning of graphics

Automatic creation of statistics on each zone (min, max, average, min of min, max of max)

Reading Possibility to calculate on each channel (F0, A0, offset, slope, %, ax+b, etc …)

Reading

In radio mode : real time calculations with automatic backup.

Availability