@Perkins Proprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Manufacturing Facility

Covered factory space: Shrewsbury 30,000m2 (323,000

sq ft)

Centralised manufacture of all core components

All engines are tested to ensure that specified powers are achieved prior to despatch to the customer

The two sites provide the flexibility and responsiveness required by the customer base

Employees Shrewsbury = 750

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins Power Range

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Shrewsbury Volume Breakdown by Sector

3008 Diesel1998 Full Year Sales

3012 Diesel1998 Full Year Sales

Others1%

Diesel Gen Set99%

Diesel Gen Set92%

Military8%

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

3000 Series Product Range

8 Cylinder engines power range covering 325 - 530 kW (438 - 709 bhp)

Arrangement 90° vee form

Cycle 4-stroke

Induction system T, TA

Displacement 17.4 Litres

Bore & Stroke 135 x 152 mm

Compression Ratio 14.5 : 1

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

3000 Series Product Range 12 Cylinder engines power range covering

441 - 756 kW (590- 1011bhp)

Arrangement 60° vee form

Cycle 4-stroke

Induction system T, TA

Displacement 26.11 Litres

Bore and Stroke 135 x 152 mm

Compression Ratio 14.5 : 1

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Prior to Perkins 3000 Range it was the CV range.

CV range manufactured between 1979 & 1986.

CV8 3008 CV12 3012

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Service and Durability

Ease of maintenance

Minimal downtime

Low cost of ownership

World-wide support network

400 hour standard service intervals

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Engine Performance

Controlled rapid combustion

Matched turbochargers

- improving SFC

- load acceptance

Mechanical governing tailored to meet market requirements

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

3008 Crankcase

Cast as a one piece unit in close grained, high duty iron.

Machined to accept dry liners.

All integral oilways are machined.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

3012 Crankcase

Cast as a one piece unit in close grained, high duty iron.

Machined to accept dry liners.

All integral oilways are machined.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Crankshafts

Manufactured from a chrome molybdenum forging.

Nitride hardened on all surfaces.

except front and rear faces.

Balanced at machining stage.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Crankshaft regrinding

Re-grind to:

- 0,25 mm Re-grind & Re-harden:

- 0,50 mm Re-grind to:

-0,75 mm Re-grind & Re-harden:

-1,00 mm

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Main Bearings Steel backed, lead/bronze bearings with a

lead/indium overlay.

Upper half fully grooved

Oversize bearings available to accommodate various levels of crank re-grind.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Connecting Rods

Produced from Chrome Molybdenum forgings.

Fitted in sets according to weight

Each Rod is stamped with an identification letter.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Pistons Cast in low expansion Aluminium alloy.

Open torroidal combustion bowl

Top ring has cast iron insert.

Piston crown marked:

‘EXHAUST SIDE’ for correct fitting

Machined slot for cooling jet.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Cylinder Liners

Produced from centrifugally cast iron

Joint face on top of flange has two ‘VEE’ grooves to assist gas sealing.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Cylinder Heads 3008.

Two identical cast iron (4 bore) cylinder heads per engine.

Two inlet valves per cylinder.

Two exhaust valves per cylinder.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Cylinder Heads 3012

Four cast iron (3 bore) cylinder heads per cylinder

Two inlet valves per cylinder

Two exhaust valves per cylinder

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

Perkins 3000 Series Engines

Turbochargers

On 3000 series engines there is one turbo charger per bank.

Early 3008 had a single turbo.

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

3000 series

Two stage Turbocharging

TTAG, TTWG

One turbo feeds directly into the second

@PerkinsProprietary Information of Perkins Engines Company Limited ©2000 - All Rights Reserved

3000 Series

The Perkins 3000 Series is a family of well proven 8 and 12 cylinder diesel engines

Deliver compact and dependable Power Solutions

Suitable for Gen Set, Materials Handling and Defence Power Applications