View
226
Download
4
Category
Preview:
Citation preview
www.pebinternational.com
The Directors of PEB International have combined experience of 50 years in the design, manufacture and installation of Pre Engineered Steel buildings and its accessories. The prospective clients of Pre Engineered metal buildings can benefit from concept
design to installation from this experience.
1
PRE ENGINEERED BUILDING DIVISIONPEB INTERNATIONAL
50 YEARS EXPERIENCE
www.pebinternational.com2
We do value engineering complete with detail drawings, fabrication and erection of Pre - Engineered steel buildings in the region.
PRE ENGINEERED BUILDINGS
400 METERS OF STEEL IN DUBAI
METAL ROOF CURB IN FM GLOBAL ROOF SYSTEM IN PAKISTAN
HEAVY FAB FACILITY IN OMAN STEEL MILL IN PAKISTAN
STEEL, DECKING AND STUDS IN PAKISTAN (3)
HEAVY FAB FACILITY IN OMAN STEEL, DECKING AND STUDS IN PAKISTAN
www.pebinternational.com3
PEB BUILDING SYSTEMS (TEB)
PEB Profiles & manufactured from cold formed galvanized high tensile steel sections which are more cost effective, faster to construct and much more energy efficient than equivalent hot rolled portal frame buildings.
LIGHT GAUGE BUILDING
• Cost and Retail Prices
• Bills of Materials
• Hole Punch Details
• Concrete Footing Details
• Portal Frame Dimensions
• Architectural Drawings
• Supplier Purchase Orders
• Detailed Customer Quotations
FROM THE INITIAL QUOTE TO FINALIZING THE BUILDING ORDER, THE SOFTWARE ACCURATELY DETAILS:
www.pebinternational.com4
STANDING SEAM CLADDING
PEB specializes in projects that appear impossible on the surface. We deliver the best of “German technology” to ensure the highest quality. From 3-D planning, to production, to INSTALLATION
www.pebinternational.com5
PEB INTERNATIONAL
The repair and maintenance of metal roofs has never been easier or more effective. Using on roof seams, fasteners, and other roof joints water tight sealing can be accomplished effectively and economically. Simply apply in a heavy bead over end laps and vertical seams, or in a dollop over defective fasteners. is a brush-grade mastic with unique physical properties. Unlike most asphaltic or acrylic coatings, will not crack or become brittle over numerous freeze/thaw cycles. This unique material actually stretches and recovers to bridge roof joints in which thermal movement can be expected. With 1500 PSI Tensile Strength and 600% Elongation capabilities, can singlehandedly tackle most metal repairs. is typically stocked and purchased as white in color. Clear is also stocked for skylight panel restoration. White is U.V. Stable but clear PEB Water Proofing is only moderately U.V. Stable.
Dry to touch: 2-3 hours • fully cured at 72°F: 3 days • elongation (ASTMD-412) @ 77 F: 600% • recovery 99% • recovery from 100% elongation (ASTMD-412): 100% • tensile
strength (ASTM D-412): 1500 PSI • vapor (ASTME-96): 0.15 • color stability: excellent • resistance to sunlight: excellent • resistance to • weathering effect: slight chalking • adhesion to aluminum (ASTM 3359-80): 5 (highest rating) • adhesion 3359-80): 5
(highest rating) • cold temperature flexibility: excellent • abrasion resistance: excellent.
Before applying the roof must be free from grease, dirt, moisture, and all foreign
products. Using a power washer works best. But for small repair jobs one could use a brush and water (repeatingly if repair area is properly clean. Remember to let dry before applying . Apply in a temperature range of 40° to 120°F. After application, has a service temperature range of -40° to 180°F.
ROOF LEAKING SOLUTION
www.pebinternational.com6
The World’s Most Advanced LED Integrated Daylighting System Superior Lens Design Captures Daylight from all Angles Converts Full Spectrum of Natural Light into Cool Even Illumination Thermal Neutral Design is Great for all Climates
Positive Eff ect on Human Performance Saving Energy Cost, Saving the Environment & Creating Employment
Natural Abundant Illumination The Sunshine Daylighting System is a cutting edge Deep Well Skylight designed to convert raw sunlight into cool, even illumination.
• A technologically advanced lens design captures sunlight from all directions while magnifying it to maximize lumen output, even on cloudy days.
• Featuring a unique diffusing lens that eliminates the more harmful spectrum of sun rays and evenly disperses light throughout the building.
• Engineered for Thermal Neutrality. Each unit is insulated to prevent external heat gain and the loss of internal conditioned air.
• Controlled LED Lighting System monitors for reduced natural light and provides additional lumens to maintain a pre-determined light level.
• Available as a traditional Deep Well Skylight (Sunshine I) or with a fully controlled LED lighting element (Sunshine ll); Sunshine Daylighting Systems easily integrate natural light into any space.
• 5 year limited warranty
• Financing available
• Quotes based on volume
• Engineered for simple installation
• The Sunshine products are available in two variations: skylight based on deep well (Sunshine I) orskylight LED lighting elements completely controlled (Sunshine ll).
• For more information, contact the local representative of Ameri Energy Group:
Systems easily integrate natural light into any space.
• The World’s Most Advanced LED Integrated Daylighting System
• Superior Lens Design Captures Daylight from all Angles
• Converts Full Spectrum of Natural Light into Cool Even Illumination
• Thermal Neutral Design is Great for all Climates
• Positive Effect on Human Performance
• Saving Energy Cost, Saving the Environment & Creating Employment
NATURAL DAYLIGHTING SYSTEM
Dual-dome lens design captures from all angles, while also providing a thermal barrier to maintain the unit’s thermal neutrality.
Specular mirrored aluminum panels cover the inside of the unit, allowing maximum light transfer to the interior of the building.
When natural light diminishes, the system utilizes LED’s to replace that light, and regulate Lux output to the interior up to 5,800 Lux. The lifetime of LED lamps is approximately 50,000 hours.
Diffusing lens provides glare free natural light to the interior, while also screening out the more harmful spectrum of sunlight.
The inner structure is made of galvanized steel to provide strength and
rigidity to the entire unit. The exterior walls are made of aluminum
to keep the unit light weight.
Mounting curb provides an installation platform, and is crucial in our leak proof design.
www.pebinternational.com7
FEATURE
• Highly Efficient Absorber Of High Performance With Daily Average Efficiency Over 50%;
• Start Up Quickly, Heat Pipe Transfer The Heat Energy Into The Storage Tank In One Direction.
• Withstand Pressure Of 6 Bar, Can Be Connected Directly With City Water.
• No Water Inside The Evacuated Tubes; The Solar Water Heater Can Still In Service Even With Several Tubes Breakage;
• Highly Efficient Insulation With Polyurethane Foam;
• Simple Structure, Easy To Assembly And Install, Diffuse Flat Plate Reflector Can Be Assembled Easily With Its Module Structure;
• Can Be Used All Year Round In The Cold Climate;
• Can Be Used Together With Auxiliary Electric Boost;
• Long Service Life, Can Be Used As Long As 15 Years.
SOLAR SYSTEMS ON METAL ROOF
PEB OFFICE ADDRESS | PEB INTERNATIONAL FZE .UAE | MAS ENTERPRISES.PK Leading suppliers of PEB, accessories, industrial LED , and energy saving solutions.
Address: lob 2 office no. 2G-17a hamriyah free zone – Sharjah, UAE | TEL: +971 65261385 | Warehouse: +971 43380980 Customer Service (Faris) : +971 551053394 | General Manager (Siddique) : +971 557723750
Email: Sales@pebinternational.com | Info@pebinternational.com
OUR VALUABLE CLIENTS
www.pebinternational.com
OUR STRATEGIC PARTNERS
INDUSTRIAL LED DIALIGHT
COMMERCIAL LED QVIS LIGHTING
SOLAR STREET LIGHT CARMANAH
NATURAL LIGHT AMERIENERGY GROUP (DAYLIGHTING SYSTEM)
8
Recommended