View
25
Download
4
Category
Preview:
Citation preview
SERVING INDUSTRIES IN:
Animal Bedding Manufacturing
Wood Pellets Manufacturing
Grain & Agricultural Products
Food & Chemical Products
Engineered Wood Products
Maine Pellet FuelsWe are a proud member of the Maine Pellet Fuels Association.
Pellet Fuels InstituteWe are a proud member of the Pellet Fuels Institute.
At PDI, we are committed to unparalleled customer service, and believe that our growth lies with the success of our customers.
The philosophy behind PDI is simple – to design and supply
state-of-the-art, reliable equipment to enable our customers to succeed in
today’s manufacturing markets. By combining innovative engineering and
practical experience, we have created a line of machinery that provides
significant economic benefits, superior finished product quality, and some of the
lowest emissions in the industry. While our unique solutions are at the forefront
of trade technology, we rely on our experience in maintenance, operations, and
plant management to offer equipment that is easy to operate and built to last.
At PDI, we are committed to unparalleled customer service, and believe that our
growth lies in the success of our customers.
• Capacity Ranges of 5-50 tons/hr
• Energy Efficient Design
• Low Emissions
• Complete System Integration
• Complete Design, Construction, and Startup
• Guaranteed Production Performance
PDI Drying Systems are designed to meet the diverse
needs of today’s manufacturers. The result is innovative
equipment that provides cost-effective and environmentally-
compliant performance, responsive to even the most
stringent guidelines. Our customized solutions use advanced
technology to ensure a consistent quality finished product,
giving our customers a competitive edge.
PDI Drying Systems utilize precise airflow management and
retention time controls, ensuring consistent outlet moisture.
Our density classification results in lower fuel consumption
than traditional systems, and reduces the emissions created
by over-drying smaller materials.
Efficiency of design allows a PDI system to generate higher
throughput than traditional approaches in smaller drums.
Our unique mechanical design on the outlet of the dryer
lowers the horsepower required for the induced draft fan
for a typical cyclone-based outlet. This approach reduces
the need for secondary cyclones, and allows for increased
flexibility for materials segregation.
Drying Systems
PDI developed its innovative energy system as a practical
solution to industry needs. We responded to demand
for a system that would burn a wide range of fuels,
allowing manufacturers to use available and inexpensive
materials. As a result, PDI energy systems can be operated
using either wet or dry fuel, or a combination of both.
Reasonably priced and versatile, our patented burner is
the key to cost-competitive usage of fuel sources.
Each PDI energy system is a custom design, utilizing
precise calculations of retention time to prevent carry-over
of ash, sparks, or other materials. Engineered combustion
chambers and individualized burner management
programming result in minimal emissions, regardless of
the quality of incoming fuel sources. A PDI energy system
offers a flexible and efficient approach to meet the energy
demands of a modern manufacturing facility.
Energy Systems
• Economical Design
• Fuel Handling Systems
• Custom Grate Design
• Automatic Ash Removal
• Green or Dry Fuel Compatible
• Dilution & Recycle Systems
• Custom Controls Packages
• Full Control of all air zones for maximum flexibility
• Heat Range from 1 -200 MMBTU/hr
Our EPC Services division developed in response to
customer need for a “turn-key” approach to capital
projects. By managing the complete engineering,
procurement, and construction process, PDI serves as
a single point of contact for busy project managers
and engineers. As well as specializing in Drying
Islands, PDI also offers services and support to
develop your project from concept to completion.
Managing the full scope ensures seamless transitions,
a cohesive engineering plan, and a single point of
responsibility for project performance.
From basic plant layout and feasibility studies, through
process optimization, PDI’s staff has the expertise,
ability, and practical experience to assist you with any
scope of project.
Contact us today for more information:Tel: 207.764.6811 info@playerdesign.net www.playerdesign.net
Project Management Services
• Drying Island Supply and Construction
• EPC Project Management
• Plant Layout
• Process Design
• Feasibility Studies
• Full Scope Engineering and Project Management Services
PLAYER DESIGN INC.
P.O. Box 712
Presque Isle, ME 04769
Tel: 207.764.6811
info@playerdesign.net
www.playerdesign.net
Recommended