NITTO KOHKI CO., LTD. ATRA ACE

【 Combination of Pilot Pins & Broach Cutters 】 【 Optional Items 】

【 Dimensions 】【 Specifications 】

Part No.

Size

PILOT PIN 08025(A1)Part No.TJ12696

PILOT PIN 06025(C1)Part No.TK01167

PILOT PIN 06025(C1)Part No.TK01167

PILOT PIN08035(A2)Part No.TJ15859

T K 0 0 6 9 8T K 0 0 6 9 9T K 0 0 7 0 0T K 0 0 7 0 1T K 0 0 7 0 2T K 0 0 7 0 3

T K 0 1 1 4 8T K 0 1 1 4 9T K 0 1 1 5 0T K 0 1 1 5 1T K 0 1 1 5 2T K 0 1 1 5 3

T K 0 0 3 3 5T K 0 0 3 3 6

T K 0 0 3 3 7T K 0 0 3 3 8T K 0 0 3 3 9

T K 0 0 3 4 0T K 0 0 3 4 1T K 0 0 3 4 2T K 0 0 3 4 3T K 0 0 3 4 4T K 0 0 3 4 5T K 0 0 3 4 6T K 0 0 3 4 7T K 0 0 3 4 8T K 0 0 3 4 9T K 0 0 3 5 0T K 0 0 3 5 1

T K 0 0 3 0 1T K 0 0 3 0 2T K 0 0 3 0 3T K 0 0 3 0 4T K 0 0 3 0 5T K 0 0 3 0 6T K 0 0 3 0 7T K 0 0 3 0 8T K 0 0 3 0 9T K 0 0 3 1 0T K 0 0 3 1 1T K 0 0 3 1 2T K 0 0 3 1 3T K 0 0 3 1 4T K 0 0 3 1 5T K 0 0 3 1 6T K 0 0 3 1 7T K 0 0 3 1 8T K 0 0 3 1 9

One-touch Type JETBROACHOne-touch Type HI-BROACH

Depth 25 mm

12

13

14

15

16

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

26

26.5

27

SupportingMagnet Ass’yPart No. TB04374

Battery Charger *Part No. TB09825(AUSTRALIA : Part No. TB09806)

Battery Pack *Part No. TB09824

Guard *Part No. TQ14333

Cutting Oil 2L Can (Blue)Part No. TB01507

*Included in standard accessories.

Model (Atra Main Unit)VoltageBattery Pack (Lithium-ion Battery)No Load Speed min-1

CLA-272018 V

NBL18006（18 V 4.0 Ah）430

One-touch TypeJETBROACH

One-touch TypeHI-BROACH

Right and LeftBack and forth

●Carry Case Ass'y : 1set●Cutting Oil 0.5L Ass'y : 1set●Jet oiler NO.3013 : 1pc.●Tube 4×7 : 1m●Battery Charger : 1pc.●Battery Pack 18V NBL18006 : 2pcs.●Guard : 1pc.

* In case of a full charge from an empty battery. However, it can be charged up to 95% in 45 min.

Model (Battery Pack)Power SourceCharging TimeChargeable battery pack

NC14435220 - 240 V AC

90 min*

NBL18006(18 V 4.0 Ah)

36

46

126

199

290

293

51

60(Stroke)

65

10010*

10*

Minus Carbon Printing Systems

Printed in Japan 14XV00- 1Specifications and designs are subject to change at any time without notice.

Head Office9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanTel : +81-3-3755-1111 Fax : +81-3-3753-8791E-mail : overseas@nitto-kohki.co.jpNITTO KOHKI CO., LTD.

DISTRIBUTED BYThis catalog is printed using environmentally friendly paper and vegetable oil inks.

www.nitto-kohki.co.jp/eWeb

Tk124

ISO 9001ISO 14001

ISO 9001JQA-2042Machine Tools Division

ISO 14001JQA-EM4057NITTO KOHKI CO., LTD.

ATRA ACEPortable Magnetic Base Drilling Machine

NITTO KOHKI CO., LTD.

Model CLA-2720

CORDLESS MODEL

CLA-2720

CORDLESS MODEL CLA-2720

Adjustment range ofdrilling position

5,500(561)65 × 12610 mm10 mm

7*

Magnet Holding PowerMagnet Dimensions

Mass (Weight)

mm

mmN(kgf)

mm

kg

Standard Accessories ●Lashing Belt BLC002R-015 : 1pc.●Handle Ass'y : 1set●Blade : 1pc.●Hex. Socket Head Cap Screw 5x12 : 1pc.●Hex. Socket Head Set Screw 8x28 : 1pc.●Hex. Socket Screw Key 3 : 1pc.●Hex. Socket Screw Key 4 : 1pc.●Spanner 8x10 : 1pc.

*Adjustable range of drilling position

Unit : mm

Diameter Depth 25 mm Depth 35 mm

Hole Diameter12 to 17

17.5 to 2712 to 1516 to 27

Plate Thickness6 to 126 to 206 to 126 to 20

8 dia.76 mm 91 mm

8 dia.6.35 dia.

81 mm

5 dia.6.35 dia.

81 mm

5 dia.

* Including Battery Pack and Feed Handle.

293

mm

Actu

al S

ize

MOTORLOAD

INDICATION

SLIDE SLIPDETECTION

BATTERY LEVEL

INDICATION

VOLTAGE LEVEL

ELECTRIC CURRENT OF THE ELECTRIC DRILL

BATTERYLEVEL LOW

REQUIRECHARGING

PARTIALLYCHARGED

LIGHT LOAD MEDIUM LOAD OVERLOAD MOTOR STOPPEDBY OVERLOAD

FULL

REDRED BLINKINGCONTINUOUS

LED INDICATION / The battery level can be confirmed at a glance.

【 Adjustment of Drilling Position 】

【 LED INDICATION (BATTERY & MOTOR) 】

【 Feed Handle Location 】【 Optional Items 】

【 Battery Pack & Battery Charger 】

Using the Lithium-ion batteryIt takes about 90 minutes for a full charge.*

*Sufficient charge (95%) can be achieved in just 45 minutes.

Battery Charger

Battery Pack

Adjustable back and forth, right and left 10 mm

Can be attached on the right or left hand side.

10 mm10 mm

The high luminance LED lamp will give full support to your drilling!

RED BLINKING (WHITE)BLINKING

(BLUE)BLINKING

(GREEN)BLINKING

Efficient Load

Please charge the battery Charged!

Caution!

“NO LOAD”DETECTION

MOTORNOT ACTIVATED

IN TIME

If the excessive load is kept applied on the drill, the Motor will come to a full stop to protect the Motor and the operator.

SAFETY

When a slide slip is detected, the blue lamp will flash and the Motor will stop automatically.

While the electric drill is running, if no load is applied for 7 seconds, the green lamp will flash. After another 3 seconds without load, the electric drill will be stopped automatically.

After the Magnet switch is turned on, if the Motor switch is not turned on within 10 seconds, the green lamp will flash.

HIGHLY ADVANCEDENERGY-SAVING

The large electric current on start-up is prevented by starting the electric drill gently

Soft Start Function

Unnecessary operations are eliminated

Automatic Drill Stop and Warning Function

The magnet force is automatically reduced when the drill is not running

Magnetic Force Control Function

Side Slip and Inclination detected by a built-in sensor

TOP-LEVELSAFETY

Highly Sensitive Sensor Equipped

The machine checks for faults itself

Self-check FunctionWeight reduced by

utilising a moulded plastic Housing

HANDYTotal Weight Just 7 kg

It makes it possible to drill holes anywhere

Powered by a Battery

CORD

Suitable for high or narrow or hard to access areas.

12 to 27mm

Hole Cutting Capacity : Hole Diameter

CORDLESS MODEL CLA-2720

Cordless and compact bodyPowered by a Battery !!

Lithium-ion batteries are required to be recycled; never discard a lithium-ion battery in the waste. Please contact your local sales office or community recycling program for information on properly disposing of lithium-ion batteries.

LED Indication

LED INDICATION / The load on the Motor can be monitored while drilling.

YELLOW GREEN

REDYELLOWGREEN

ENERGY-SAVING

Pipe Attachment Ass’y(Part No. TB07696)

For pipe size 48.3 - 323.9 mm dia.(with JBO35L only)

Oil Tank Ass’y(Part No. TB09657)

3 TIMES* 3 TIMES* 3 TIMES*

*After the lamp flashes 3 times with the color according to the battery level, the lamp turns green.

Portable Magnetic Base Drilling Machine