ISO 14001 ISO 9001 JQA-EM4057 JQA-2042 NITTO KOHKI …fukuda.com.sg/wp-content/uploads/2016/10/Nitto-Kohki.pdf · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC

NITTO KOHKI CO.,LTD.

JQA-2042 NITTO KOHKI CO.,LTD.Machine Tools Division

ISO 9001JQA-EM4057NITTO KOHKI CO.,LTD.

ISO 14001

NEEDLE SCALER

JET CHISELAIR HAMMER

AUTO CHISELPNEUMATIC SCALER

SUPER KELENPNEUMATIC CHIPPING HAMMER

AIR CHIPPERPNEUMATIC GRINDER

MYTONPNEUMATIC DIE GRINDER

AIR SONICPNEUMATIC HAND DRILL

AIR DRILLPNEUMATIC BELT SANDER

BELTONPNEUMATIC DUST-FREE SANDER

ORBITAL SANDERPNEUMATIC COMPACT SANDER

PALM ORBITAL SANDERHANDY PNEUMATIC SANDER

FREE SANDERPNEUMATIC RECIPROCATING SANDER

LINE SANDERPORTABLE PRECISION FINISHING FILE

SUPER HANDPORTABLE FINE FINISHING FILE

MICRO AIR HANDPNEUMATIC HACKSAW

SUPER SAWPORTABLE CHAMFERING TOOLS

BEVELERPNEUMATIC RADIAL CHAMFERING TOOL

CIRCUIT BEVELER

Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machinesand pneumatic hand tools are among thefinest precision engineered equipmentto be found today.

HI CUPLA Series

"delvo" Electric Screwdrivers, Spring Balancer,Linear Motor Driven Free Piston System

Machine Tools

NOTES ON USING TOOLS – Important Safety Instructions

Page

3-4

5-6

7

8

9-10

11-12

12

13-14

15

15

16

17

18

19

19

20-22

22

23

24

25

26

Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency!

Manufacturing

Various peening works

Rivet calking, bushinserting & removing

-

-

Sanding, grinding,chamfering, finishing

Metal working,surface smoothing

Trimming, chamferingcorner rounding

Smoothing,intermediate finishsanding


Surface sanding,rust & stain removal

Plane sanding,groove sanding

Precision filing offlash, chamfering,sanding, groovefinishing

Cuts with small radii

Various drilling works

Chamfering of largeworkplaces

Chamfering of diesand machine

Paint & rust scaling

Sheet metal cutting,paint chiseling, rivetpunching

-

-

-

Chamfering, roughgrinding, moldgrinding

Various grindingworks

Spot smoothing,surface regulation,finish sanding

Surface smoothingof steel products,finishing of pressedproducts


Spot smoothing,corner rounding,surface smoothing

Spot smoothing,surface regulation

Trimming, filing innarrow space,surface regulation

To cut mild steelplates, aluminum,plastics and othermaterials


-

Chamfering of steelplate

Spatter, chips &sludge scaling

Flux chiseling,plaster chiseling

Spatter, sludge andrust chiseling, scaling

-

Bead grinding, crosssection grinding

Bead grinding

Bead grinding, rustremoval, chamfering,section finishing

Surface sanding ofpre-welded part


-

-

-

Finish filing

-

Initial boring for gascutting by welder

-

Surface chamfering ofpre-welded shaped steel parts

-

-

Paint chiseling

Paint chiseling

Paint chipping

Grinding of pre-painted surface,buffing

Pre-painted surfaceregulation

Rough grinding, rust& paint removal,spot smoothing

Ground work sanding

Ground work sanding

Sanding of pre-painted, plasteredsurface, water sanding

Sanding of plasteredsurface, intermediatefinish sanding

Precision filing ofpre-painted surface,sanding

-

Paint scrambling(w/attachment)


-

Sand blasting &chiseling

Trimming, sandchiseling

Black surface scaling,scaling of ingotremnant in ladle

Sand chipping

Trimming, chamfering

Mold correction,trimming

Trimming, chamfering,spatter grinding,die-cast finishing

Trimming, surfacefinishing of die-casting


Mold correction

Mold correction

Trimming

-

-

-

Chamfering of castmolds

Rust scaling,welded-part finish

Various automotiverepair works

Removal of weeds,shells, concretechipping

Removal of weeds,shells, etc., concretechipping

Additional grinding,rust removal, surfacesmoothing

Precision grindingof parts

Welding chip grinding,finish grinding, fitting

Correction of grinding(finish works)


Paint sanding ofautomotive body


Trimming, precisionsanding of parts

To cut the body plateof automotive vehiclesor shaped steel

Drilling, removal ofspot-welded parts


-

-

-

-

-

-

Grinding of pipecross section andinner surface

Grinding of pipe &equipment surfaceface section

Precision finishing

Precision finishing

Sanding of plasteredsurface, and test piecesurface

Synthetic resin sanding

Filing, superfine filingfor profile correction

Precision filing offlash, chamfering,groove finishing

Trimming Trimming, precisionsanding of parts


To cut fiber plates.To cut fiber-reinforcedplastic plates

-

-

-

-

-

-

-

Sanding

Correction grindingof molded products,rough grinding

Finish sanding offurniture, profilecorrection of plasticproducts

Precision sanding

Precision sanding

Finish sanding, curvedsurface sanding,sanding of routergroove

Rough finish sanding


-

-

Drilling

-

-

Surface coarsening ofstone and concreteproducts

Concrete breaking,chiseling of stick

Concrete chiselingfrom framework,removal of linoleumfrom floor base

Chipping of stoneproducts

Chamfering of stoneproducts, honing

Additional grindingof constructionmaterials & parts

Grinding of parts &elements, repairservices of tools

Surface sanding ofconstructed materials


Sanding of stoneproducts and floormaterials

Inner surface sandingof channeled parts

Correction sanding ofmetal parts

-

-

Sash works


Chamfering of columns(HB-15B)

Sheet-Metal Working Welding Painting Metal Casting &Forging

Automotive &Ship Building

Chemical Engineering Wood Working & Art Construction

CONTENTS

1 2

NEEDLE SCALER

JET CHISELAIR HAMMER

AUTO CHISELPNEUMATIC SCALER

SUPER KELENPNEUMATIC CHIPPING HAMMER

AIR CHIPPERPNEUMATIC GRINDER

MYTONPNEUMATIC DIE GRINDER

AIR SONICPNEUMATIC HAND DRILL

AIR DRILLPNEUMATIC BELT SANDER

BELTONPNEUMATIC DUST-FREE SANDER

ORBITAL SANDERPNEUMATIC COMPACT SANDER

PALM ORBITAL SANDERHANDY PNEUMATIC SANDER

FREE SANDERPNEUMATIC RECIPROCATING SANDER

LINE SANDERPORTABLE PRECISION FINISHING FILE

SUPER HANDPORTABLE FINE FINISHING FILE

MICRO AIR HANDPNEUMATIC HACKSAW

SUPER SAWPORTABLE CHAMFERING TOOLS

BEVELERPNEUMATIC RADIAL CHAMFERING TOOL

CIRCUIT BEVELER

Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machinesand pneumatic hand tools are among thefinest precision engineered equipmentto be found today.

HI CUPLA Series

"delvo" Electric Screwdrivers, Spring Balancer,Linear Motor Driven Free Piston System

Machine Tools

NOTES ON USING TOOLS – Important Safety Instructions

Page

3-4

5-6

7

8

9-10

11-12

12

13-14

15

15

16

17

18

19

19

20-22

22

23

24

25

26

Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency!

Manufacturing

Various peening works

Rivet calking, bushinserting & removing

-

-

Sanding, grinding,chamfering, finishing

Metal working,surface smoothing

Trimming, chamferingcorner rounding



Surface sanding,rust & stain removal

Plane sanding,groove sanding

Precision filing offlash, chamfering,sanding, groovefinishing

Cuts with small radii


Chamfering of largeworkplaces

Chamfering of diesand machine

Paint & rust scaling

Sheet metal cutting,paint chiseling, rivetpunching

-

-

-

Chamfering, roughgrinding, moldgrinding

Various grindingworks

Spot smoothing,surface regulation,finish sanding



Spot smoothing,corner rounding,surface smoothing

Spot smoothing,surface regulation

Trimming, filing innarrow space,surface regulation

To cut mild steelplates, aluminum,plastics and othermaterials


-


Spatter, chips &sludge scaling

Flux chiseling,plaster chiseling

Spatter, sludge andrust chiseling, scaling

-

Bead grinding, crosssection grinding

Bead grinding

Bead grinding, rustremoval, chamfering,section finishing



-

-

-

Finish filing

-

Initial boring for gascutting by welder

-

Surface chamfering ofpre-welded shaped steel parts

-

-

Paint chiseling

Paint chiseling

Paint chipping

Grinding of pre-painted surface,buffing

Pre-painted surfaceregulation

Rough grinding, rust& paint removal,spot smoothing

Ground work sanding

Ground work sanding

Sanding of pre-painted, plasteredsurface, water sanding

Sanding of plasteredsurface, intermediatefinish sanding

Precision filing ofpre-painted surface,sanding

-

Paint scrambling(w/attachment)


-

Sand blasting &chiseling

Trimming, sandchiseling

Black surface scaling,scaling of ingotremnant in ladle

Sand chipping

Trimming, chamfering

Mold correction,trimming

Trimming, chamfering,spatter grinding,die-cast finishing



Mold correction

Mold correction

Trimming

-

-

-

Chamfering of castmolds

Rust scaling,welded-part finish

Various automotiverepair works

Removal of weeds,shells, concretechipping

Removal of weeds,shells, etc., concretechipping

Additional grinding,rust removal, surfacesmoothing

Precision grindingof parts

Welding chip grinding,finish grinding, fitting





Trimming, precisionsanding of parts

To cut the body plateof automotive vehiclesor shaped steel

Drilling, removal ofspot-welded parts


-

-

-

-

-

-

Grinding of pipecross section andinner surface

Grinding of pipe &equipment surfaceface section

Precision finishing

Precision finishing

Sanding of plasteredsurface, and test piecesurface

Synthetic resin sanding


Precision filing offlash, chamfering,groove finishing

Trimming Trimming, precisionsanding of parts


To cut fiber plates.To cut fiber-reinforcedplastic plates

-

-

-

-

-

-

-

Sanding

Correction grindingof molded products,rough grinding

Finish sanding offurniture, profilecorrection of plasticproducts

Precision sanding

Precision sanding

Finish sanding, curvedsurface sanding,sanding of routergroove

Rough finish sanding


-

-

Drilling

-

-

Surface coarsening ofstone and concreteproducts

Concrete breaking,chiseling of stick

Concrete chiselingfrom framework,removal of linoleumfrom floor base

Chipping of stoneproducts

Chamfering of stoneproducts, honing

Additional grindingof constructionmaterials & parts

Grinding of parts &elements, repairservices of tools



Sanding of stoneproducts and floormaterials

Inner surface sandingof channeled parts

Correction sanding ofmetal parts

-

-

Sash works


Chamfering of columns(HB-15B)

Sheet-Metal Working Welding Painting Metal Casting &Forging

Automotive &Ship Building

Chemical Engineering Wood Working & Art Construction

CONTENTS

1 2

Powerful scaling with multi-needles

Never skips a blow, cleans and descales all jobs fast. Gets into extremely restricted areas...

An asset in any industry...de-slagging, de-sputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a light-weight,minimum- size air tool, Jet Chisel delivers years of trouble-free, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient time-saver in ship-board applications, too.

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

qty

inch

kg

AJC-16

0.6 {6}

0.07

6,000

OD 2 × 7 pcs. or OD 3 × 3 pcs.

3/8

0.98

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Needle

Hose Size

Mass (Weight)

JT-20

0.6 {6}

0.2

4,000

OD 2 × 29 pcs. or OD 3 × 12 pcs.

3/8

2.4

JEX-20

0.6 {6}

0.2

4,000

OD 2 × 29 pcs. or OD 3 × 12 pcs.

3/8

2.75

• Needle OD 3 mm × 180 mm : 3 pcs. (Needle OD 3 mm × 180 mm : 3 pcs. on the body)• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.



Slim TypeAJC-16Model

Popular TypeJT-20Model

NEEDLE SCALER JET CHISEL SCALING

JEX-20Model

Low Vibration Type

190 mm245 mm 244 mm

JET CHISEL

Reinforcement of a welded part with the shot peening effect increases strength by imparting residual stress to the surface of the workpiece through the high speed impact of the needles. Highly suitable for effective reinforcement of deteriorated welded parts.

Shot Peening Effect Full Automatic SystemThe only unit of it’s kind on the market without springs. This means no springs to break...no irregular power... and the advantage of low air consumption.

3

NEEDLE SCALER JET CHISELSCALING

Electric Needle Scaler

Optional Needles

EJC-32A

Model

Rated Air Pressure


Stroke Speed

Needle

Hose Size

Mass (Weight)

Model

Specifications

Standerd Accessories

MPa {kgf/cm2}

m3/min

min-1

qty

inch

kg

JC-16

0.15

4,000

OD 2 × 29 pcs.

1.4

JEX-24

0.27

4,000

OD 2 × 53 pcs. or OD 3 × 23 pcs.

2.7

JEX-2800A

0.43

3,700

3.1

JEX-28

0.35

4,500

3.5

• Needle OD 2 mm × 150 mm : 58 pcs. (Needle OD 2 mm × 150 mm : 29 pcs. on the body)

• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.

• Needle OD 3 mm × 180 mm : 23 pcs. on the body• 6 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.

The same excellent performance as our air tool!

Standard Accessories• Needle OD 3 mm × 180 mm : 30 pcs.(Needle OD 3 mm × 180 mm : 15 pcs. on the body)• 6 mm Hex. Socket Screw Key : 1 pc.

• Needle OD 4 mm × 180 mm : 14 pcs.• Needle OD 3 mm × 180 mm : 28 pcs. on the body• Needle Supporter OD 4 mm : 1 pc. • 6 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.

• Needle OD 4 mm × 180 mm : 14 pcs.• Needle OD 3 mm × 180 mm : 28 pcs. on the body• Needle Supporter OD 4 mm : 1 pc. • Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.

UniversalTypeJEX-24Model Heavy-duty

TypeJEX-28Model JEX-2800AModel

Operated with standard electric supply to households.Special long and slim barrel design suitable for narrow corners.Double-insulated motor does not need grounding.Free subhandle position best fit to your working situation.

PN Description QtyTA98780TA98781TA9A213TA9A214TA98782TA9A216TA9A217TA9A218TA98783TA9A220TA9A221

100 pcs.100 pcs.50 pcs.50 pcs.100 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Needle OD 2 mm × 150 mmNeedle OD 2 mm × 180 mmNeedle OD 2 mm × 300 mmNeedle OD 2 mm × 500 mmNeedle OD 3 mm × 180 mmNeedle OD 3 mm × 300 mmNeedle OD 3 mm × 500 mmNeedle OD 3 mm × 800 mmNeedle OD 4 mm × 180 mmNeedle OD 4 mm × 300 mmNeedle OD 4 mm × 500 mm

Specifications

W

A

min

min-1

qty

m

kg

115 V AC, 50/60 Hz

2.8

230 V AC, 50/60 Hz

1.4

EJC-32A

300

30

3,000OD 2 × 32 pcs. or OD 3 × 15 pcs.

5

4.5

Model

Power Supply

Rated Power Consumption

Rated Current

Rated Duty

Stroke Speed

Needle

Power Cord Length

Mass (Weight)

JC-16Model LightweightType

158 mm 237 mm264 mm

247 mm

150 mm

520 mm

225 mm

159 mm173 mm 173 mm

Low-vibration Type

PN Description Qty ModelTP00338TP00337TQ05210TQ04554TP00290TP02244TP02245TP01499TP01461TP01462TP16475TP16301

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

JT-20,JEX-20

AJC-16

JEX-24

EJC-32A

JEX-28,JEX-2800A

JC-16

Needle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 4 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mm

230 V AC only

OD 2 × 66 pcs. or OD 3 × 28 pcs. or OD 4 × 14 pcs.

0.6 {6}

3/8

4

SCALING

A special spool valve inside gripassures excellent durability

The A-300 Auto Chisel is designed for speeding up the repair and sheet metal works of automobiles, etc. Being light and powerful, labor can be reduced remarkably. This tool enables the work to be done in narrow space where ordinary hammering work is impossible. Thus the skill usually needed in hammering work is eliminated. The respective parts employ high quality material and are subjected to high precision process.

Model

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

inch

kg

A-300

0.6 {6}

0.3

2,600

1/4

1.7

Model

Rated Air Pressure


Stroke Speed

Hose Size

Mass (Weight)• Bushing R 1/4 × NPT 1/4 : 1 pc.• Hose Nipple R 1/4 × 1/4 : 1 pc.

A-300

Optional AttachmentsPN Description Qty PN Description Qty

TP00572TP00573TP04606TP00575TP00576TP00577TP00578TP00579TP00580TP00581TP00582TP00583

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.1001 Blank ChiselNo.1002 Flat Chisel No.1003 Sheet Metal Chisel ANo.1004 Sheet Metal Chisel B No.1005 Silencer Cutting ChiselNo.1006 Rubber Bushing Remover No.1007 Spot Weld BoosterNo.1008 Bushing ToolNo.1009 PunchNo.1010 Bushing Removing ToolNo.1011 Sheet Metal PunchNo.1012 20 mm Bending Chisel

TP00584TA90051TP00586TP00585TP00589TP00590TP00591TP04995TP05244TP05775TP05801

-

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.-

No.1013 Fork Chisel 24No.1014 Panel CrimperNo.1016 Fork Chisel 35No.1017 Fork Chisel 15No.1018 38 mm ScraperNo.1019 60 mm ScraperNo.1020 60 mm Concave ScraperNo.1023 Sheet Metal Chisel CNo.1024 Moilpoint ChiselNo.1025 Rivet Removing PunchNo.1026 Rivet Caulking Chisel -

185 mm

160 mm

AIR HAMMER AUTO CHISEL

AUTO CHISEL

5

SCALING

Applications and wide variety of optional attachmentsNo. 1001 Blank Chisel (TP00572)For a variety of sheet metal work, bending,and rivet closing jobs

No. 1002 Flat Chisel (TP00573)Puts increased efficiency into scraping,peeling spot welds, and cutting off bolts andpins

No. 1003 Sheet Metal Chisel A (TP04606)Cuts shapes in sheet metal fast

No. 1004 Sheet Metal Chisel B (TP00575)Just the chisel for cutting off sheet metal bodypanel

No. 1005 Silencer Cutting Chisel (TP00576)A quick cut-off chisel for muffler piping

No. 1006 Rubber Bushing Remover (TP00577)Helps you remove idle arm sleeves andbushings in record time

No. 1007 Spot Weld Booster (TP00578)Ideal for peeling off spot welded points andcutting off pins

No. 1008 Bushing Tool (TP00579)Puts speed and ease into the job of bushinginsertion

No. 1009 Punch (TP00580)For driving out pins and rivets, and fitting andremoving bearings and races

No. 1010 Bushing Removing Tool (TP00581)A faster servicing aid in removing bushings

No. 1011 Sheet Metal Punch (TP00582)Opens holes for bolts and rivets

No. 1012 20 mm Bending Chisel (TP00583)Helps you in peening and removing slagaround welds

No. 1013 Fork Chisel 24 (TP00584)Disconnecting tie rod ends and ball joints

No. 1014 Panel Crimper (TA90051)Bending sheet metal: external body plates,doors, fenders, etc.

No. 1016 Fork Chisel 35 (TP00586)Disconnecting tie rod end ball joints

No. 1017 Fork Chisel 15 (TP00585)Disconnecting tie rod end ball joints

No. 1018 38 mm Scraper (TP00589)Peeling paint & removing rust from iron plate

No. 1019 60 mm Scraper (TP00590)Peeling paint & removing rust from iron plate

No. 1020 60 mm Concave Scraper (TP00591)Removing incrustation from pipe

No. 1023 Sheet Metal Chisel C (TP04995)Cuts shapes in sheet metal fast

No. 1024 Moilpoint Chisel (TP05244)Breaking-up concrete, removing sand fromcastings

No. 1025 Rivet Removing Punch (TP05775)Removing rivets from brake lining of heavyduty cars

No. 1026 Rivet Caulking Chisel (TP05801)Caulking brake lining of heavy duty cars

AIR HAMMER AUTO CHISEL

6

SCALING

Industrial and shipboard descaling and cleaning

The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications.

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

inch

mm

kg

S-250

0.6 {6}

0.27

2,500

12.7

3/8

630 × 49

4.1

Model

Rated Air Pressure


Stroke Speed

Size of Chisel Shank

Hose Size

Dimension

Mass (Weight)

S-500

0.6 {6}

0.27

2,500

12.7

3/8

890 × 49

4.7

S-1000

0.6 {6}

0.27

2,500

12.7

3/8

1,470 × 49

6.1

• 38 mm Bend Scraper (No.2005) : 1 pc. on the body• Hose Lock Nut M16 : 1 pc.• Hose Nipple 3/8 : 1 pc.



S-1000Model

S-500ModelS-250

Model

Optional Chisels

PN Description QtyTP03645TP03646TP03647TP04010TP04552TP04553TP04554

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.2001 60 mm ScraperNo.2002 38 mm ScraperNo.2003 Blank ChiselNo.2004 60 mm Concave ScraperNo.2005 38 mm Bend ScraperNo.2006 60 mm Concave Bend ScraperNo.2007 60 mm Bend Scraper2001 2002 2003 2004 2005 2006 2007

PNEUMATIC SCALER SUPER KELEN

SUPER KELEN

7

SCALING

Now chipping after welding is easy!

The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH-16 has many features on the followings..... • Idle running proof structure adopted. No blowing without touching the work piece by the chisel. • Vibration on operation is reduced by low vibration structure. Especially effective on continuous operation. • Easy to handle, compact lightweight type, and weight only one kilogram

Model

Rated Air Pressure


Stroke Speed

Size of Chisel Shank

Hose Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

ACH-16

0.6 {6}

0.15

6,000

OD 10.5

3/8

0.9

CH-24

0.6 {6}

0.2

4,000

12.7 sq.

3/8

1.7

• Flat Chisel 20 × 120 : 1 pc. on the body• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.

• Curved Flat Chisel 25 × 155 : 1 pc. on the body• Bushing R 3/8 × NPT 3/8 : 1 pc.• Hose Nipple R 3/8 × 3/8 : 1 pc.

Model

ACH-16Model

CH-24

Optional Chisels PN Description Qty

TQ03431TQ03453TQ03549TQ03452

TQ03452TQ03549TQ03453TQ03431

1 pc.1 pc.1 pc.1 pc.

Flat Chisel 20 × 120Curved Flat Chisel 20 × 120Flat Chisel 11 × 120Flat Chisel 20 × 180

PN DescriptionChisel for Air Chipper CH-24

Chisel for Air Chipper ACH-16

QtyTP15234TP15233TP15166

TP15166TP15233TP15234

1 pc.1 pc.1 pc.

Straight Flat Chisel 12.7 × 165Flat Chisel 25 × 155Curved Flat Chisel 25 × 155

147 mm

184 mm

AIR CHIPPERPNEUMATIC CHIPPING HAMMER AIR CHIPPER

8

GRINDING & SANDING

A wide variety of models are available to a particular job!

MLG-25Model

0.6 {6}

0.75 (No load) 1.1 (Load)

7,600

180

3/8

Model

Rated Air Pressure


Free Speed

Depressed Center Grinding Wheel

Hose Size

Mass (Weight)

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

• 6 mm Hex. Socket Screw Key : 1 pc.• 10 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.• Handle Ass’y : 1 set.• Wheel Guard Ass’y : 1 set


Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

MLG-25

0.6 {6}

0.42

19,000

58

1/4

0.6

MLG-40

0.6 {6}

0.45 (No Load) 0.91 (Load)

13,000

100

3/8

1.5

MAGW-40

0.6 {6}

0.68 (No load) 0.82 (Load)

13,000

100

3/8

1.55

Model

Rated Air Pressure

Air Consumption

Free Speed

Depressed Center Grinding Wheel

Hose Size

Mass (Weight)

• Green Disc GS #80 : 1 pc.• 5 mm Hex. Socket Screw Key : 1 pc.• 19 mm Single Ended Spanner : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

• 6 mm Hex. Socket Screw Key : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.

• 6 mm Hex. Socket Screw Key : 1 pc.• 17 mm Single Ended Spanner : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.

MAG-50

0.6 {6}

0.87

12,000

125

3/8

2.2

• Air Hose Sub Ass'y : 1 set• Exhaust Hose Ass'y : 1 set• Side Handle Ass'y : 1 set• 4 mm Hex. Socket Screw Key : 1 pc.• Pin Face Wrench : 1 pc.• Bushing R 3/8 × NPT 3/8 : 1 pc.

MAGW-40Model

Depressed centerwheel 58 mm MLG-40

ModelDepressed centerwheel 100 mm

Depressed centerwheel 100 mm

133 mm 224.5 mm

66.5 mm 85.5 mm

219 mm

95 mm

PNEUMATIC GRINDER MYTON

MYTON

MAG-50Model

Depressed centerwheel 125 mm MLG-70

ModelDepressed centerwheel 180 mmMLG-70

ModelDepressed centerwheel 180 mm

102 mm102 mm

238 mm256 mm

Lever Type Ring Type

MLG-70 Ring TypeMLG-70 Lever Type

2.252.45

221 mm

89 mm

9

MAS-20BModel

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

inch

kg

MAS-20B

0.6 {6}

0.4

22,000

1" , 1 - 1/2" and 2"

1/4

0.5

Model

Rated Air Pressure


Free Speed

Abrasive Disc

Hose Size

Mass (Weight)

MAS-40

0.6 {6}

0.45

13,700

100 mm

3/8

0.9

MAS-70

0.6 {6}

0.98

7,500

180 mm

3/8

1.9

• 14 mm Single Ended Spanner : 1 pc.• Cupla 20SH : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.• Back-up Pad 1" : 1 pc.• Back-up Pad 1 - 1/2" : 1 pc.• Back-up Pad 2" : 1 pc.• Abrasive Paper 1" × #60, #80, #100, #120 : 2 pcs. each• Abrasive Paper 1 - 1/2" × #60, #80, #100, #120 : 2 pcs. each• Abrasive Paper 2" × #60, #80, #100, #120 : 2 pcs. each

• 6 mm Hex. Socket Screw Key : 1 pc.• 17 mm Single Ended Spanner : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.• Hose Nipple NPT 1/4 × 3/8 : 1 pc.

• 10 mm Hex. Socket Screw Key : 1 pc.• 41 mm Single Ended Spanner : 1 pc.• Hose Nipple NPT 3/8 × 3/8 : 1 pc.• Bushing M16 × NPT 3/8 : 1 pc.

MAS-40Model

MAS-70Model

Abrasive disc 1",1 - 1/2" & 2"

Abrasive disc 100 mm

Abrasive disc180 mm

Optional Parts

PN Description QtyTA9B101TA9B102TA9B103TA9B104

25 pcs.25 pcs.25 pcs.25 pcs.

Paper 1" × #40Paper 1" × #60Paper 1" × #80Paper 1" × #100




Green Discs for MYTON MLG-25 Disc Pad for MYTON MAS-20B

1" Paper for MYTON MAS-20B



Paper 1 - 1/2" × #40Paper 1 - 1/2" × #60Paper 1 - 1/2" × #80Paper 1 - 1/2" × #100



Paper 1 - 1/2" × #120Paper 1 - 1/2" × #180Paper 1 - 1/2" × #240Paper 1 - 1/2" × #320

1 - 1/2" Paper for MYTON MAS-20B







2" Paper for MYTON MAS-20B

GRINDING & SANDING

PN Description QtyTB08872TB08873TB08874TB08875TB08876

5 pcs.5 pcs.

10 pcs.5 pcs.5 pcs.

GS#46 × 58 mmGS#60 × 58 mmGS#80 × 58 mm

GS#100 × 58 mmGS#120 × 58 mm

128 mm

101 mm

180 mm

82 mm

99 mm

202 mm

PN Description QtyTP18576TP18575TP18574

1 pc.1 pc.1 pc.

PAD (1") No.1PAD (1 - 1/2") No.2PAD (2") No.3

PNEUMATIC SANDER MYTON

* Green Discs cannot be used on MAG-25.

Japanese Model

10

GRINDING

The perfect tool for all tasks!

L-25BModel

Specifications


Optional AccessoriesMounted Wheel for AIR SONIC L-25B (5 pcs/set) Rotary Bar for AIR SONIC L-35C (1 pc.)

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

L-25B

0.4

27,000

0.6 (without hose)

Model

Rated Air Pressure


Free Speed

Size of Collet Chuck

Hose Size

Mass (Weight)

L-35C

0.35

37,500

0.45 (without hose)

• 14 mm Single Ended Spanner : 1 pc.• Mounted Wheel No.2 : 1 pc.• Mounted Wheel No.3 : 1 pc.

No.1 : 16 × 32

No.5 : 19 × 28

No.2 : 16 × 32

No.6 : 25 × 13

No.3 : 19 × 20

No.7 : 32 × 10

No.4 : 25 × 25

No.8 : 16 ballPN : TA9A277

PN : TA9A281

PN : TA9A278

PN : TA9A282

PN : TA9A279

PN : TA9A283

PN : TA9A280

No.1 : CB1C-106

PN : TP10594

PN : TA9A284

No.5 : CB5C-104

PN : TP10598

No.2 : CB2C-105

PN : TP10595

No.6 : CB6C-102

PN : TP10599

No.3 : CB3C-103

PN : TP10596

No.7 : CB7C-103

PN : TP10600

No.4 : CB4C-103

PN : TP10597

No.8 : CB8C-105

PN : TP10601

• Chuck Pin : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

• 14 mm Single Ended Spanner : 1 pc.• Mounted Wheel 13 × 13 × 6 × 38 : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

For all grinding, deburring and finishing jobs Special design for rotary barsL-35CModel

The high-speed mighty mite with super-efficient silencer and rear exhaust system. Wonder works on all metals, wood, and plastics, even extremely hard and exotic materials. And now that efficiency is upgraded with the addition of an air silencer and new rear exhaust system for grinding dust-it's all the more the perfect tool for toolrooms and model shops. The super efficiency of the silencermakes it possible for all craftsmen to work longer with less irritation due to noise. For precision grinding, deburring machines parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastics. This is the compact, easy handing air tool for all tasks.

136 mm 171 mm

PNEUMATIC DIE GRINDER AIR SONIC

AIR SONIC

0.6 {6}

6

1/4

11

AL-55Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

AL-55

0.6 {6}

0.17

56,500

3

1/4

0.25

Model

Rated Air Pressure


Free Speed

Size of Collet Chuck

Hose Size

Mass (Weight)

High Speed Rotation 56,500 rpm

• Mounted Wheel 5 × 13 × 3 : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

• Spanner 7 × 9 : 1 pc.Standard Accessories

GRINDINGDRILLING

129 mm

22 mm OD

AIR SONICPNEUMATICDIE GRINDER

• Smooth high speed rotation and low vibration enables precision grinding• Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications• Compact & light weight for comfortable operation over long periods of time• Triangular grip fits operator's hand• Special plastic grip prevents cold hands and absorbs vibration• Rear exhaust system

Grinding Stone (Optional)

• 5 dia. × 13 × 3 mm : 10 pcs./set

PN TB00137

PNEUMATICHAND DRILL AIR DRILL

ADR-65Model Model

Model

Rated Air Pressure


Free Speed

Max. Drilling Capacity

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

kg

ADR-65

0.6 {6}

0.55

2,900

6.5

0.8

ADR-100

0.6 {6}

0.67

2,000

10.0

1.1

• Drill Chuck : 1 pc. on the body• Chuck Handle : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.• 30SH : 1 pc.

Optional Accessory• Hanger : 1 pc. *A hanger to be mounted on the bottom of the grip is available as option.

The power and performance you needto drill deeper and faster

175 mm

154 mm

ADR-100

168 mm

221 mm

• Built-in silencer • Reversible• Variable speed adjustment• Rubber grip reduces chilled hand

Change rotation direction by turning the valve as indicated.

Forward

Reverse

Reversible

Variable speed adjustmentTurn the speed control nutto change the R.P.M.

AIR DRILL

12

SANDING

Rear exhaustsystem

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

m/min

mm

inch

kg

B-10N0.6 {6}

0.417,0001,120

10 × 3301/40.7

Model

Rated Air Pressure


Motor Free Speed

Belt Speed

Belt Size

Hose Size

Mass (Weight)

B-20N0.6 {6}0.52

17,0002,620

20 × 5201/41.2

B-30N0.6 {6}0.68

14,0002,160

30 × 5401/42.4

•Abrasive Belt Z#60 × 10 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 10 mm :1 pc.•Abrasive Belt Z#100 × 10 mm :1 pc.•Abrasive Belt Z#120 × 10 mm :1 pc.•2 mm Hex. Wrench Key :1 pc.•4 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Silencer :1 pc.

•Abrasive Belt Z#60 × 20 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 20 mm :1 pc.•Abrasive Belt Z#100 × 20 mm :1 pc.•Abrasive Belt Z#120 × 20 mm :1 pc.•2.5 mm Hex. Wrench Key :1 pc.•4 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Convex Shoe :1 pc.•Finger Pad Ass'y :1 pc.•Pan Head Screw 5 × 10 :1 pc.•Pan Head Screw 6 × 10 :1 pc.

B-20NB0.6 {6}0.52

17,0002,620

20 × 5201/41.2

•Abrasive Belt Z#60 × 20 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 20 mm :1 pc.•Abrasive Belt Z#100 × 20 mm :1 pc.•Abrasive Belt Z#120 × 20 mm :1 pc.•2.5 mm Hex. Wrench Key :1 pc.•4 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Convex Shoe :1 pc.•Finger Pad Ass'y :1 pc.•Pan Head Screw 5 × 10 :1 pc.•Pan Head Screw 6 × 10 :1 pc.

•Abrasive Belt Z#60 × 30 mm :2 pcs. (1 pc. on the body)•Abrasive Belt Z#80 × 30 mm :1 pc.•Abrasive Belt Z#100 × 30 mm :1 pc.•4 mm Hex. Wrench Key :1 pc.•5 mm Hex. Wrench Key :1 pc.•Bushing R 1/4 × NPT 1/4 :1 pc.•Sub Handle Ass'y :1 set•Grip Guard :1 pc.•Silencer :1 pc.

Optional Parts

PN Description QtyTQ10942TB07283TB05539

1 pc.1 set1 set

Shoe 6 (for 6 mm belt)

Bracket 6 Ass'y (for 6 mm belt)

Offset Bracket 10 Ass'y

Optional Parts for B-10NPN Description Qty

TB07109 1 setOffset Bracket 20 Ass'y

Optional Parts for B-20N/B-20NBPN Description Qty

TB08150 1 setOffset Bracket 30 Ass'y

Optional Parts for B-30N

PN Description QtyTB00241TB00242TB00243TB00244TB00245TB00246TA9A237TA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Abrasive Belt Z#60 × 6 mmAbrasive Belt Z#80 × 6 mmAbrasive Belt Z#100 × 6 mmAbrasive Belt Z#120 × 6 mmAbrasive Belt Z#180 × 6 mmAbrasive Belt Z#240 × 6 mmAbrasive Belt AA#400 × 6 mmAbrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm

Abrasive Belt for B-10NPN Description Qty

TA99605TA99606TA99607TA99608TA99609TB00250TB00251TA9A252TA9A253TA9A254

20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.

Abrasive Belt Z#40 × 20 mmAbrasive Belt Z#60 × 20 mmAbrasive Belt Z#80 × 20 mmAbrasive Belt Z#100 × 20 mmAbrasive Belt Z#120 × 20 mmAbrasive Belt Z#180 × 20 mmAbrasive Belt Z#240 × 20 mmAbrasive Belt AA#280 × 20 mmAbrasive Belt AA#320 × 20 mmAbrasive Belt AA#400 × 20 mm

Abrasive Belt for B-20N/B-20NB Abrasive Belt for B-30NPN Description Qty

TB00252TB00253TB00254TB00255TB00256TB00257TB00258TA9A262TA9A263TA9A264

20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.

Abrasive Belt Z#40 × 30 mmAbrasive Belt Z#60 × 30 mmAbrasive Belt Z#80 × 30 mmAbrasive Belt Z#100 × 30 mmAbrasive Belt Z#120 × 30 mmAbrasive Belt Z#180 × 30 mmAbrasive Belt Z#240 × 30 mmAbrasive Belt AA#280 × 30 mmAbrasive Belt AA#320 × 30 mmAbrasive Belt AA#400 × 30 mm

PNEUMATIC BELT SANDER BELTON

BELTONB-30NModel

Belt Size30 mm (W)B-30NModelBelt Size30 mm (W)

299 mm

257 mm

B-20NModelBelt Size20 mm (W)

250 mm

243 mm

Model B-20NB Belt Size20 mm (W)

250 mm

243 mm

B-10NModel B-10NModelBelt Size10 mm (W)

152 mm

223 mm

The Idle Pulleyfor B-20N is supportedby both sides.

The Idle Pulleyfor B-20NB is supportedby one side only.

13

SANDING

Optional Parts For BABY BELTON

PN Description QtyTA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Abrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm

Abrasive Belt for BB-10A

*1: #400 is Aluminium Belt.

PN Description QtyTB07114TB07115TB07116TB07117TB07118TB07119TB07120TB07125TB07126TB07127TB07128TB07121TB07122TB07123

20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.5 pcs.5 pcs.5 pcs.

Abrasive Belt Z#60Abrasive Belt Z#80Abrasive Belt Z#100Abrasive Belt Z#120Abrasive Belt Z#180Abrasive Belt Z#240Abrasive Belt Z#400*1

Abrasive Belt CE#60Abrasive Belt CE#80Abrasive Belt CE#100Abrasive Belt CE#120Finish Belt A-VF (Equivalent to #180)

Finish Belt A-M (Equivalent to #320) Finish Belt S-SF (Equivalent to #400)

Abrasive Belt for BB-20

PNEUMATIC BELT SANDER BELTON

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

m/min

mm

inch

kg

Model

Rated Air Pressure


Motor Free Speed

Belt Speed

Belt Size

Hose Size

Mass (Weight)

BB-200.6 {6}0.43

16,0001,100

20 × 3301/40.8

BB-10A0.6 {6}0.25

16,0001,000

10 × 3301/40.6

•Abrasive Belt Z#100 × 10 mm:1 pc. (on the body)•Abrasive Belt Z#120 × 10 mm:1 pc.•Abrasive Belt Z#180 × 10 mm:1 pc.•Abrasive Belt Z#240 × 10 mm:1 pc.•1.5 mm Hex. Wrench Key :1 pc.•Cupla HA-65SN:1 pc.

•Abrasive Belt Z#60 × 20 mm:1 pc. (on the body)•Abrasive Belt Z#120 × 20 mm:1 pc.•Abrasive Belt Z#240 × 20 mm:1 pc.•2.5 mm Hex. Wrench Key :1 pc.•3 mm Hex. Wrench Key :1 pc.•Cupla HA-65SN:1 pc.•Shoe:1 pc. •Dust Cover :1 pc.

Ideal for deburring, chamfering, bead grinding, and polishing applications

Deburring & chamfering of uneven edge and plate surfaces

Detail finishing Deburning of thin materials

Curved and unique profiles

Belt rotation direction can be changed. Lever position can be changed for right or left hand operator convenience.

For left-handed user

For right-handed user

BABY BELTON BB-10AModelBelt Size10 mm (W)

246 mm

79 mm

BB-20ModelBelt Size20 mm (W)

249 mm

103 mm

• Compact and lightweight, yet powerful• Alternative rotation direction• Ergonomically designed for right or left hand operator convenience

• Compact and lightweight, yet powerful• Alternative rotation direction• Ergonomically designed for right or left hand operator convenience

ReverseReverseForwardForward

14

SANDING

APS-125/150

Standard Accessories • Spanner 17 : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort

Model

Specifications

Non Vacuum

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

kg

APS-125

0.6 {6}

0.45

10,000

5

125

0.69

0.10

Model

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad Mass (Weight)

APS-150

0.6 {6}

0.45

10,000

5

150

0.72

0.12• Feather edging, metal preparation, and

finishing work on body filler• Curved surface sanding and corner

rounding in wood work

Applications

Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts.

For Self Vacuum & Central Vacuum

Self Vacuum Central Vacuum

• Extremely light. APS-125 weighs just 690 g.• Simple structure for easy maintenance• Extremely low vibration• Adjustable speed

Random orbital action produces a high-quality swirl-free finish

145 mm

PNEUMATIC COMPACT SANDER PALM ORBITAL SANDER

PALM ORBITAL SANDER

OSV-60ASand and polish metal, wood, plastic to a super fine swirl-free finish.Light weight, compact, powerful, whisper quiet, and adjustable speed regulator.Productivity and efficiency increase with the orbital sander. The lightweight unit delivers the performance of heavy duty unit with less vibration and reduced operator fatigue.

Model

Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

OSV-60A

0.6 {6}

0.68

8,500

10

150

2.0

for self stick papers

Model

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad

245 mm

Compact yet extremely powerful.Built-in adjustable speed regulator


• Bushing R 1/4 × NPT 1/4 : 1 pc.• Spanner 17 : 1 pc.• Brush : 1 pc.• Dust Bag : 1 pc.• Hose : 1 pc.• Hose Band : 1 pc.

Random orbital action creates aprofessional finish

ORBITAL SANDER

The special construction includes the mounting of counter shaft below the rotor. This works in combination with the spindle and circular motions for an extra-fine finish. Speed adjustments allow selection for the best speed for the best job. Random orbital action eliminates swirl patterns and is suitable for polishing, too.

15

SANDING

Superlight, Quiet New low-vibration sander

FS-100C

Small and Lightweight for Comfort and ConvenienceFree Sander fits the hand like a glove. It's human-engineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots.

Minimized Hand VibrationThe turbine motor of FS-100C and the single-ball air motor of FS-50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Model

Round-Pad for FS-100C

FS-50AModel

The pad is made of sponge rubber and conform easily to the shape being worked.Double-side tape is used with round pad.

This newly developed motor features a turbine disc and is capable of high speed orbits for super-fine finishing of all materials.

Optional Accessories PN Description Qty

TA99828TB02240

1 pc.1 pc.

Rubber Pad Ass'yDust Collector Ass'y

PN Description QtyTA9A367TA91474TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271TB02235

1 pc.1 pc.

200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.

1 pc.

Rubber Pad Ass'yRound Pad Ass'yAbrasive paper #100Abrasive paper #120 Abrasive paper #150Abrasive paper #180 Abrasive paper #240 Abrasive paper #280 Abrasive paper #320 Dust Collector Ass'y

ModelModel

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Pad Size

Paper Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

FS-100C

0.6 {6}

0.2

20,000

1.5

100 × 110

114 × 140

0.5

FS-50A

0.6 {6}

0.14

15,000

1.2

75 × 82

70 × 114

0.5

• Air Hose H Ass'y : 1 set• Bushing R 1/4 × NPT 1/4 : 1 pc.• Abrasive paper #180 : 5 pcs.• Abrasive paper #240 : 5 pcs.

• Air Hose H Ass'y : 1 set• Bushing R 1/4 × NPT 1/4 : 1 pc.• Abrasive paper #180 : 5 pcs.• Abrasive paper #240 : 5 pcs.

For Free Sander FS-100C For Free Sander FS-50A

Powerful turbine motor

82 mm75 mm100 mm110 mm

FREE SANDERHANDY PNEUMATIC SANDER FREE SANDER

16

SANDING

Sands to a clean finish and more in less time.Compact and light.

Light sanding with piston movementA compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation.Incorporates no gears and other complicated mechanisms.

Double Piston AlignmentSpecial double-action minimizes both noise and vibration so the operator works in more comfort.

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

LS-10

0.6 {6}

0.11

4,000

4

55 × 103

57 × 140

0.75

Model

Rated Air Pressure


Free Speed

Stroke

Pad Size

Abrasive Paper Size

Mass (Weight)

• Hose E Ass'y : 1 set• Bushing R 1/4 × NPT 1/4 : 1 pc.• Block Rubber Pad Ass'y : 1 set• Abrasive Paper #240 : 5 pcs.• Abrasive Paper #320 : 5 pcs.• Base Plate A Ass'y : 1 set

LS-10

Optional AccessoriesPN Description Qty

TB02244 1 pc.Dust Collector Ass'y

Special Sanding PadAn accessory Block Rubber Pad Ass'y can be easily trimmed to conform the shape beingworked.

103 mm

55 mm

PNEUMATIC RECIPROCATING SANDER LINE SANDER

LINE SANDER

17

FILING

Super efficient way of easyfiling, polishing and finishing

SH-100A

SUPER HAND replaces work.SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs.It comes with the quick-change tool points for different jobs. You can work on steel, glass, brass, aluminium, wood and other materials silently. It also handles scores of big jobs with speed and ease.

Model

Rubber Pad Ass'y for SH-100A

Supporter Ass'y for SH-100A

Optional Accessories

PN Description QtyTA9A222TA9A223

TA9A224

TA9A225TA91752TA94625TB04319

5 pcs.5 pcs.

5 pcs.

5 pcs.1 set1 set1 set

Rat Tail SF-10Triangular Taper File SF-11 Half Rounded File(Rat Tail/Double Cut) SF-12Flat Bastard File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100ASanding Pad Ass'y for ASH-900

Model

Rated Air Pressure


Stroke Speed

Stroke

Max. Shank dia. of Points

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

SH-100A

0.6 {6}

0.24

3,700

9

6.3

1.1

ASH-900

0.6 {6}

0.2

6,300

9

5.0

0.5

• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 3 mm Hex. Socket Screw Key : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 2.5 mm Hex. Socket Screw Key : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

For Super Hand SH-100A & ASH-900

Flat Bastard File SF-13

Weight reduced by halffor comfortable operationover long period of time

Rat Tail File SF-10

Triangular Taper File SF-11

Half Round File (Rat Tail/Double Cut) SF-12

Sanding Pad Ass'y for ASH-900

177 mm

SUPER HANDPORTABLE PRECISION FINISHING FILE SUPER HAND

ASH-900Model

182 mm

18

FILINGCUTTING

PNEUMATICHACKSAW SUPER SAWPORTABLE FINE

FINISHING FILE MICRO AIR HAND

Special double-piston system achieved lowvibration while cutting speed improved!!

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

kg

SSW-110

0.6 {6}

0.29

7,000

11

0.62

Model

Rated Air Pressure


Stroke Speed

Stroke

Mass (Weight)

• 32 mm Saw Blade : 2 pcs.• 3 mm Hex. Socket Screw Key : 1 pc.• Bushing R 1/4 × NPT 1/4 : 1 pc.

SSW-110

Optional Accessories

PN Description QtyTA9A005TA9A011TB00193TB00192


32 mm Saw Blade24 mm Saw Blade18 mm Saw Blade14 mm Saw Blade

SSW-110 has many features on the followings......

• Low vibration is achieved by the special design of double piston mechanism

• New adoption of piston rings minimized power loss and improved cutting efficiency

• Optimized blade stroke for maximum cutting performance• Rear exhaust system for chip-scattering-free operation• New double-lock throttle lever prevents unintended start• Cutting Capacity : Max. plate thickness 3 mm (for Mild

Steel)

205 mm

SUPER SAW

Select either one of the 2 modelsdepending on your applications.

2.2 mm

MAH-162.2mm

Stroke

0.5 mm

MAH-050.5mm

Stroke

Diamond files (5 pcs/set)

Flat end file (PN TB07502)

Triangular end file (PN TB07504)

Round end file (PN TB07503)

Half-round end file (PN TB07505)

2

2

ø3

ø3ø3

2

ø3

65

ø1

0.5

1

65

4.5

1.5

65

65

2

R1 Vice Holder (PN TB07506) Grinding stone plates such as ceramic grindingstones in the market can be also mounted.(Max size: Thickness 3.2 mm × Width 20 mm)

Mounting examples

MICRO AIR HAND

• Flat end file : 1 pc.• Round end file : 1 pc.

• Bushing R1/4 × NPT 1/4 : 1 pc.• Hex. Wrench key 2 : 1 pc.Standard Accessories

176 mm

21 mm OD

Fine reciprocating motion best forprecision parts filing

Specifications

MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

MAH-05

22,000

0.5

MAH-16

11,000

2.2

Model

Rated Air Pressure


Stroke Speed

Stroke

Shank diameter of file

Mass (Weight)

MAH-05/MAH-16Model

MAH-05

MAH-16

0.6 {6}

0.07

3

0.4

19

XChamfer

YStraight

XChamfer

YStraight

CHAMFERING

HB-15B

• Ideal for chamfering before welding• Uses easy-to-replace indexable inserts• Indexable inserts have four working edges for good economy• Finishes a surface so fine that post-sanding is unnecessary• Column R-section can be chamfered with optional attachment• No damage of workpieces is expected as heat-hardening or oxidization will seldom happen

Chamfering up to 15C

Standard accessories• Hex. Socket Screw Key 4,5,6 mm : each 1 pc.• Spanner 24 × 27 : 1 pc.• Hook Spanner 25 - 28 : 1 pc.• 3 mm T Wrench Key : 1 pc.• TA9A093 Indexable Insert 12.7 sq. 1 set(12 pcs./ set)

Optional accessories• TA9A728 Pipe Plate Ass'y for 5" to 32" (125 mm to 800 mm)

Model

Standard accessories• 3 & 4 mm Hex. Socket Screw Key : each 1 pc.• Spanner T-9F : 1 pc.

Optional accessories• TA9A386 Indexable Insert 9.525, 10 pcs./set• TA9A592 Indexable Insert 9.525 2R, 10 pcs./set• TA9A638 Indexable Insert 9.525 3R, 10 pcs./set• TA9A594 Inner Head Ass'y

• An outer R-part attachment allows chamfering of outer diameters with a radius greater than 170 mm

• An optional inner head ass'y allows chamfering a pipe of inner diameter larger than 100 mm (50R)

Handy Electric Chamfering Tool

MB-03A Double insulation

3C3R

Model

278 mm

150 mm

108 mm

220 mm

295 mm295 mm

HAND BEVELER

MINI BEVELER

PORTABLE CHAMFERING TOOLS HAND BEVELER

SpecificationsModel

Power Supply (Single phase)


Rated Current

Chamfering Capacity

Chamfering Radius Capacity

Chamfer Angle

Rated Revolutions

Mass (Weight)

MB-03A

230 V or 115 V AC, 50/60 Hz

430

2 / 4.5

0C - 3C

2R, 3R

45˚

7,100

2.5

W

A

min-1(rpm)

kg

45˚30˚15˚

X1594

Y15

15.515.4

HB-15BMild Steel(mm)

ChamferAngle

Chamfer angle and width

Mild Steel

Model

Power Source (Single phase)


Rated Current

No-load Speed

Chamfering Capacity

Chamfer Angle

Mass (Weight)

Specifications

WA

min-1(rpm)

kg

115 V AC, 50/60 Hz91010.53,340

230 V AC, 50/60 Hz910

42,750

HB-15B

0C - 15C15˚ - 45˚

14

Chamfer angle, width and radius

45˚

X

3

Y

3

MB-03A

Mild Steel(mm)ChamferAngle

Round

RadiusModel

Material

Radius(mm)

MB-03A

Mild Steel

2, 3

15CMild Steel

Chamfering I-beamsChamfering I-beamsChamfering steel platesChamfering steel plates

Compact and light for speed chamfering

20

XChamfer

YStraight

XChamfer

YStraight

CHAMFERING

ModelHandy Electric Chamfering Tool

EMB-0307B

3C

7C4R

4R

Stainless Steel

Mild Steel

316.4 mm

179 mm

189.6 mm

MINI BEVELER

Standard accessories• Indexable Insert with Hole 12.7 : 1 pc.• Indexable Insert Set Screw : 1 pc.• 5 mm Hex. Socket Screw Key : 1 pc.• Spanner 8 × 10 : 1 pc.• Spanner T-15D : 1 pc.

• Sub Handle : 1 pc.• Grip Guard : 1 pc.• Ball Bearing 687zz : 1 pc.• Gauge C3 : 1 pc.

ECB-0203Electric Radial Chamfering Tool

Smoothly chamfering straight and curved edges • Applicable up to 3C (3R) mild steel chamfering, and up to 1.5C (2R) stainless steel chamfering

• Minimum chamfering plate thickness is 2 mm (Max.0.5C)• Indexable inserts have four working edges for good economy• An optional straight plate allows chamfering a straight edge shoulder

*1: In case of chamfering 3R, an optional indexable insert for 3R is necessary, and chamfering 2R, an optional guide sleeve 24 mm dia, and indexable insert for 2R are necessary.

1.5C 2RStainless Steel

3C 3RMild Steel

Model

Chamfering straight edges Chamfering curved edges

136 mm

400 mm

Standard accessories• Carbon Brush Ass'y : 1 set.• 4 mm Hex. Wrench Key : 1 pc.• Indexable Insert with Hole 12.7 : 1 pc.• Indexable Insert Set Screw 4 × 7 : 1 pc.• Dust Box Ass'y : 1 set.

• Hex. Nut M8 : 2 pcs.• 8 × 25 mm Hex. Socket Set Screw : 2 pcs.• Spanner T-15D : 1 pc.• Pan Head Screw 5 × 10 : 3 pcs.

Specifications

• Applicable up to 3C stainless steel chamfering, and up to 7C mild steel chamfering

• Indexable inserts have four working edges for good economy• Chamfering angle can be adjusted to any desired position at 15˚ - 45˚• Pipe outer edge can be also chamfered with standard accessories

that come with the tool• Dust box collects swarf and chips effectively

Model

Power Supply


Rated Current

Rated Duty

Chamfer Angle

Power Cord Length

Mass (Weight)

EMB-0307B

220 V - 240 V AC, 50/60 Hz

1010

4.6

Continuous

0C - 7C, 2R, 3R, 4R

0C - 3C, 2R, 3R, 4R

15˚ - 45˚

4.0

3.9

CIRCUIT BEVELER

PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER

Double insulation

Double insulation

W

A

m

kg

Mild Steel

Stainless Steel

SpecificationsECB-0203

220 V - 240 V AC, 50/60 Hz45030

11,0000C - 3C, 2R*1, 3R*1

0C - 1.5C, 2R*1

45˚2.52.5

W

min

min-1(rpm)

m

kg

ChamferingCapacity

Mild Steel

Stainless Steel

Model

Power Supply


Rated Duty

Motor No-load Speed

Chamfer Angle

Power Cord Length

Mass (Weight)

Round

RadiusModel

Material

Radius(mm)

Mild Steel

2, 3, 4

EMB-0307B

StainlessSteel

2, 3, 4


45˚30˚15˚

X7

3.81.5

Y7

6.65.6

X3

2.21

Y3

3.83.8

EMB-0307BChamferAngle

Mild Steel(mm)Stainless Steel(mm)

Chamfering range of operationMin. Diameter Min. Radius Min. Depth Min. Thickness

45˚

X

3

Y

3

X

1.5

Y

1.5

ECB-0203ChamferAngle


MildSteel(mm)

StailessSteel Round

RadiusModel

Material

Radius(mm)

Mild Steel

2, 3

StainlessSteel

2

ECB-0203

ChamferingCapacity

21

XChamfer

YStraight

XChamfer

YStraight

Round

Radius

CB-02Pneumatic Radial Chamfering Tool

Optional accessories• TA9A386 : Indexable Insert 9.525 sq. Ass'y (10 pcs.)• TA9A592 : Indexable Insert 9.525 sq. R2 Ass'y (10 pcs.)

Standard accessories• Indexable Insert : 1 pc.• Adjustment gauge : 1 pc.• Spanner T-9F : 1 pc.

• Protective cap : 1 pc.• Hook Spanner 58-62 : 1 pc.• Bushing R 1/4 × NPT 1/4

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

Lets you chamfer easily and smoothly no matter what the curve line is• Versatility-chamfer either inner or outer edges• Precisely adjust chamfer dimensions with

accessory gauge

2C

2R

Model

CHAMFERING

116 mm

136 mm

CIRCUIT BEVELER

Pneumatic Chamfering ToolLever Type Ring Type

AMB-0307AMBL-0307

Standard accessories• 3 & 4 mm Hex. Socket Screw key : 1 pc. each• Spanner : 1 pc.• Hex. nut M8 : 2 pcs.• Bushing R 3/8 × NPT 3/8

• 8 × 25 Hex. Socket Set Screw : 2 pcs.• Indexable Insert Set Screw 4 × 7 : 1 pc.• Indexable Insert : 1 pc.

• Applicable to stainless steel and mild steel chamfering• Indexable inserts have four working edges for good economy• Simple to adjust chamfering depth and replace Indexable Inserts• Pipe outer edge can be also processed with standard accessories• Chamfering angle can be adjusted to any desired position at 15˚ - 45˚

3C

7C

4R

4R

Stainless Steel

Mild Steel

SpecificationsAMBL-0307, AMB-0307

0.6 {6}

0.9

14,000

0C - 7C or 2R, 3R, 4R

0C - 3C or 2R, 3R, 4R

15˚ - 45˚

2.9

Mild Steel

Stainless Steel

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

NOW A SMALL AIR BEVELERDOES THE BIG JOBS, TOO

202 mm

126 mm

180 mm

AMB-0307177 mm

126 mm

180 mm

AMBL-0307

MINI BEVELER

PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER

Model

Air Pressure


Free Speed

Chamfer Angle

Mass (Weight)

Model

Air Pressure


Free Speed

Chamfering Capacity

Chamfer Angle

Mass (Weight)

CB-02

0.6 {6}

0.4

13,000

0C - 2C, 2R

45˚

1.8

Chamfering range of operation

Min. Diameter Min. Radius Min. Depth

Model

Material

Radius (mm)

Mild Steel

2, 3, 4

AMBL-0307/AMB-0307

StainlessSteel

2, 3, 4


45˚30˚15˚

X74

2.2

Y778

X3

2.21

Y3

3.83.8

Mild Steel (mm)ChamferAngle

Stainless Steel (mm)AMBL-0307/AMB-0307

45˚

X

2

Y

2

CB-02

Mild Steel (mm)ChamferAngle

Round

RadiusModel

Material

Radius (mm)

CB-02

Mild Steel

2


Mild Steel

Chamfering Capacity

22

Optional Accessories for HAND BEVELER / MINI BEVELER / CIRCUIT BEVELER

HI CUPLA ACE

Body material SizeWorking pressurePressure resistancePacking materialWorking temp.range

SpecificationsEngineering plastics

1/4", 3/8", others1.5 MPa2.0 MPa

NBR-5˚C - 60˚C

For hose connection (PH)20PH-PLA30PH-PLA

20PM-PLA30PM-PLA

50PNG-PLA65PNG-PLA85PNG-PLA

20PFF-PLA

For 1/4" hoseFor 3/8" hose

For Rc 1/4" For Rc 3/8"

For 5 ID × 8 OD hoseFor 6.5 ID × 10 OD hoseFor 8.5 ID × 12.5 OD hose

For G 1/4"

For hose connection (SH)HA-20SHHA-30SH

HA-20SMHA-30SM

HA-50SNGHA-65SNGHA-85SNG

HA-T

For 1/4" hoseFor 3/8" hose

For Rc 1/4" For Rc 3/8"

For 5 ID × 8 OD hoseFor 6.5 ID × 10 OD hoseFor 8.5 ID × 12.5 OD hose

20P-PLA / HA-65S × 2

For female thread connection (PM) For female thread connection (SM)

For urethane hose with spring nut connection (PNG) For urethane hose with spring nut connection (SNG)

For male thread connection (PF) Hi Cupla Ace T type (for 2 branches)

Plastic Plug Hi Cupla Ace SocketP S

• Plastic Cuplas with a bult-in locking mechanism• Pressure ratings comparable to steel Cuplas

QUICK CONNECTIVE COUPLINGS FOR PNEUMATIC TOOLS HI CUPLA seriesHI CUPLA / HI CUPLA 200 (One-touch connection & Big flow rate type)

PlugFor hose connection17PH20PH30PH

10PM20PM30PM

20PF30PF40PF

20PFF

For 1/4" hoseFor 1/4" hoseFor 3/8" hose

For Rc 1/8" For Rc 1/4"For Rc 3/8"

For R 1/4" For R 3/8"For R 1/2"

For G 1/4"

40PH400PH600PH800PH40PM400PM600PM800PM

400PF600PF800PF

For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hoseFor Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"

For R 1/2" For R 3/4" For R 1"

17SH20SH30SH

10SM20SM30SM

20SF30SF40SF



For R 1/4" For R 3/8"For R 1/2"

40SH400SH600SH800SH40SM400SM600SM800SM

400SF600SF800SF

For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hoseFor Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"

For R 1/2" For R 3/4" For R 1"

For hose connection

For female thread connection For female thread connection

For male thread connection For male thread connection

200-17SH200-20SH200-30SH

200-20SM200-30SM200-40SM

200-20SF200-30SF200-40SF



For R 1/4" For R 3/8"For R 1/2"

200-40SH For 1/2" hoseFor hose connection

For female thread connection

For male thread connection

For male thread connection (parallel thread)

SocketP S

TypeBody material SizeWorking pressurePressure resistancePacking materialWorking temp.range

Specifications

• One-way shut-off cupla with an automatic shut-off valve in the socket• Important parts are hardened for excellent wear resistance and durability

Hi CuplaSteel (chrome-plated)

1/8", 1/4", 3/8", 1/2", 3/4", 1"1.5 MPa2.0 MPa

NBR-20˚C - 80˚C

Hi Cupla 200 Steel (chrome-plated)

1/8", 1/4", 3/8", 1/2" 1.0 MPa1.5 MPa

NBR-5˚C - 60˚C

TA9A093

TB01159

TB01791

TB01651

TB01790

TA9A386

TA9A592

TA9A638

TA9A728

TB02539

TA9A594

TB02857

TB03097

TB02862

TB03424

TQ01683

Indexable Insert 12.7 Ass'y

Indexable Insert 12.7 with hole Ass'y

Indexable Insert 12.7 Ass'y R2



Indexable Insert 9.525 with hole Ass'y



Plate Ass'y for pipe

Attachment for small dia. pipe

Inner head Ass'y

Guide sleeve 24 mm dia. Ass'y

Plate Ass'y for straight line use

Dust Box Ass'y

Spanner T-9D

Spanner T-15D

12 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

1 set

1 set

1 set

1 set

1 set

1 set

1 pc.

1 pc.

HB-15B

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307

MB-03A, CB-02

MB-03A, CB-02

MB-03A

HB-15B

EMB-0307B, AMB-0307, AMBL-0307

MB-03A

ECB-0203

ECB-0203

ECB-0203

MB-03A, CB-02

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

For pipe 125 - 800 mm dia.

For pipe 80 - 200 mm dia.

For min. 100 mm dia.

For chamfering R2

Used with Plate Ass'y for straight line use

DescriptionPN Sales Unit Application model Remarks

23

OTHER PRODUCT LINES MACHINE TOOLS

Electric & Hydarulic Machine Tools,Labor-saving plus improved work efficiency

A wide range of unique tools for boring and punching

ATRA ACE autoPORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE

Model WA-3500

HANDY SELFERELECTRICALLY OPERATED HYDRAULIC PUNCHER

Model E25-0615

JETBROACH CUTTERS &HI-BROACH CUTTERS

ANNULAR CUTTERS

JETBROACH

HI-BROACH

SELFER ACEPORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER

HYDARULIC PUMPfor SELFER ACE

Puncher & Pump

Double-Acting

Puncher

SELFER HA TypePORTABLE SINGLE-ACTING HYDRAULIC PUNCHER

HYDRAULIC PUMPfor SELFER HA Type

Puncher & Pump

Single-Acting

Puncher

ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE

Model AO-5575

ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE

Model WOJ-3200

24

MEDO pumps are unique products featuring a Linear-motor-driven Free Piston System.NITTO KOHKI has made available a complete series of air compressors and suction pumpsthat incorporate this revolutionary mechanism.These are quite appropriate as air sourcesor suction power units for variouspneumatically operated equipmentand apparatus in advanced industries.

Professional Tools for High Technology

DLV7300 SeriesDLV7500/8500 SeriesDLV7000/8000 SeriesDLV7100/7200/8100/8200 SeriesDLV3100/3300 SeriesDLV5720/5720H/5740/5740H/5750 SeriesDLV5800 SeriesDLV30SP/30HP-MKG (with built-in brushless motors)

Models

NITTO KOHKI "delvo" Electric Screwdrivers are high-quality tools for professional use,with special emphasis on precise control of torque and long life. They apply just thecorrect amount of torque –with sure, positive control always at your fingertips.They're smooth and shockless in operation, too. NITTO KOHKI's customer-orientedservice system is directly connected to sales agents to ensure thatyou can use "delvo" Electric Screwdrivers with confidence.

DLV5720/5720H/5740 Series

TW-00/TW-0/TW-3/TW-5/TW-9/TW-15/TW-22/TW-30/TW-40/TW-50/TW-60/TW-70

TIGON Spring Balancer ImprovesWork Safety & Efficiency

Models

Capacities ranging from 0.5 - 70 kg.

DLV30SP-MKG

DLV30HP-MKG

OTHER PRODUCT LINES"delvo" Electric Screwdrivers / Spring Balancer

Linear-motor-driven Free Piston System

25

SAFETY GUIDE

Safety Precautions

Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate eachNitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or toolsfor reference of safe operation and precautions.

Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could resultin serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines shouldbe followed at all times.

Warning for ALL Machines and Tools

Notice for Air ToolsNotice for Electric Tools• Air pressure at the inlet of the tool must not exceed 0.6 MPa (6 kgf/cm2).

• Always keep the work area free from clutter and potentially dangerous conditions such as hanging power cords, working debris, air hoses, and garbage to prevent accidents from occurring.

• Consider proper working environments for each tool carefully. Do not expose tools to extreme amounts of moisture or direct contact with water or rain. Keep area well lit at all times to prevent hidden dangers and never operate the equipment near flammable liquids or in gaseous or explosive atmospheres.

• Keep all tools and tool accessories away from children and all unauthorized personnel. Serious injury or possible death may result from machines being handled by children.

• Properly store machines and accessories while not in use. They should be kept in a dry, locked-up location out of reach of children or unauthorized personnel.

• Improper or negligent use of tools will cause increased maintenance costs, and the amount of time in which to complete the job. Always let the tool do the work at the rate of which it was designed. Best performance is always achieved by reading and understanding the proper operation of each machine or tool.

• Always wear safety glasses and protective hand and foot wear during or around operating tools. Wear a protective hair covering to contain long hair. Do not wear loose clothing and/or accessories as they may be caught in moving parts and inflict serious injury or possible death.

• Wear respiratory protection when working in an environment where dust particles are generated during operation.

• Do not over-reach or allow yourself to become unstable during tool operation and always maintain a correct posture.

• Use clamps or a vise to secure the work piece tightly and eliminate vibration. Never hold the work piece with your hands, keep both hands on the tool for increased productivity.

• Use the right tool or machine that can complete the job within its specifications. Do not attempt to adapt smaller machines or tools to complete a job designed for heavy-duty equipment. Do not use the tools for other than what they were designed for. There is a right tool for each job, be aware of tool limitations and never overload.

• Make sure to inspect all external screws, nuts, bolts and attached accessories are fastened tightly and secure prior to each use. All moving parts should be free from obstruction and allowed to operate smoothly. Any damaged or missing parts should be repaired or replaced by the sales agent or distributor from which the tool was originally purchased. Do not use machines or tools which cannot be activated or stopped with a power switch or lever.

• Do not use any machine with a damaged, frayed, cut, or deteriorated power cords or air hoses. Always replace at the first sign of damage.

• Always remove all tools required to adjust, add, or remove parts from tools prior to use to prevent tool damage or user injury.

• Always avoid an unexpected start by having all power buttons or levers in the off position prior to attaching to a power or air supply. Never carry tools with your finger on the on/off switch or lever when the power or air supply is attached.

• Do not use the power or air supply lines to move, carry or support the tool during usage or transportation. Do not place the power or air line near a heat source, oil, water, or items with sharp edges.

• Never leave a machine or tool running unattended. Keep a firm grip on the designated areas of the machine or tool until it comes to a complete stop. Always turn the power switch or lever to the off position and disconnect from the power source when not in use.

• Do not disassemble or modify a tool to complete a job other than what it was designed for. This will void any warranty on the equipment and may cause serious personal injury or possible death.

• Maintenance is necessary for all machines and tools. Always maintain blades and cutters properly and replace when edges become damaged or are not sharp enough for safe operation. Follow the instruction manual for lubrication needs and adjustment points if applicable. Check the power and air supply lines periodically and change accordingly to safety regulations. If an extension line is adopted, always make sure that it meets or exceeds tool requirements for amperage or air supply before using and is rated for outdoor usage. Change supply lines whenever they are found to be defective or damaged. Keep the grip and handles dry and clean of grease or oil so that it will not disturb proper operation.

• Switch off and disconnect from power source before servicing equipment or changing accessories.

• Be alert and pay close attention to the work being performed at all times. Do not operate machines or tools when heavily fatigued. Users should be aware of all circumstances surrounding their application.

• Use only recommended parts and accessories as per individual machine or tool operator manuals. Use of improper accessories or attachments may result in serious injury or possible death.

• All repairs and services must be performed by authorized Nitto Kohki dealers or technicians.

• Do not deface or remove any label, warning indicator, or nameplate associated with each machine or tool.

• The power source must be limited to the individual tools specifications as stated on the nameplate or instruction manual.

• Make sure that all machine and power tools are properly grounded at all times (excludes double-insulated tools). Always use a GFCI (Ground-Fault-Circuit- Interrupt) to protect the user and surrounding persons from electric shock.

• Be aware of low voltage situations. Improperly gauged extension cords or power cords used or shared with other electrical devices will cause all tools on the line to not run at optimal performance. This condition may result in damage to the machine and/or operator.

26

This catalog is printed using environmentally friendly paper and vegetable oil inks.

DISTRIBUTED BY

Printed in Japan 13IW05- 1

NITTO KOHKI CO.,LTD.

Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanPhone : +81-3-3755-1111 Fax : +81-3-3753-8791

Specifications and designs are subject to change at any time without notice.

Overseas Affiliates / Offices

NITTO KOHKI U.S.A., INC.TEL:+1-630-924-9393 FAX:+1-630-924-0303

NITTO KOHKI EUROPE CO., LTD.TEL:+44-1-923-239668 FAX:+44-1-923-248815

NITTO KOHKI DEUTSCHLAND GMBHTEL:+49-7-157-22436 FAX:+49-7-157-22437

NITTO KOHKI AUSTRALIA PTY LTDTEL:+61-7-3340-4600 FAX:+61-73340-4640

NITTO KOHKI (SHANGHAI) CO., LTD.TEL:+86-21-6415-3935 FAX:+86-21-6472-6957

:+86-755-8375-2185 FAX:+86-755-8375-2187

NITTO KOHKI CO., LTD.,BANGKOK REPRESENTATIVE OFFICETEL:+ :+66-2-632-0308

NITTO KOHKI (SHANGHAI) CO., LTD.SHENZHEN BRANCHTEL

POWERMARK BATTERY & HARDWARE TRADING PTE LTD.

66-2-632-0307 FAX

SINGAPORE BRANCHTEL: +65-6841-4566 FAX: +65-6841-6112

Documents

ISO 14001 ISO 9001 JQA-EM4057 JQA-2042 NITTO KOHKI …fukuda.com.sg/wp-content/uploads/2016/10/Nitto-Kohki.pdf · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC