View
10
Download
0
Category
Preview:
Citation preview
www.exdirect.bizInstrument Enclosures Direct to You
Modern Look for Today’s Electronic OEM
FIELD ENCLOSURE
Electronics Housing Insert Available
LLC
HAWKNEMA 4X Plastic Instrument Housing
• Modern Design Enhances OEM Product
• �Same�Electronics�will�fit�in�Explosion-Proof�Version�of�this�Enclosure
• Rugged Polycarbonate Plastic Enclosure
• Three ¾" Conduits Standard
• Window Size: 3.33" [84.5 mm]
• Mounting Flanges are Standard
• Optimized�Window�Viewing�Angle
• Explosion-Proof�Version�Available
• Makes your Product Stand Out
• �Drilled�&�Tapped�Internal�Mounting�Holes�Standard
• Loop�for�Attaching�Instrument�Tag
• Convenient�Electronics�Mounting
• Tamper-Proof�Seal�Holes
• Two Recessed Label Galleries
• NEMA�4X�and�IP66�Rated
• Made in USA
A PRECISION DIGITAL BRAND
2www.exdirect.biz
HAWK ENCLOSURE NEMA 4X PLASTIC INSTRUMENT HOUSINGA PRECISION DIGITAL BRAND
Instrument Enclosures Direct to You
Make Your Product Stand out From the CrowdThe� first� thing� a� customer� notices� about� your� product� is�the� enclosure� it’s� housed� in.� If� you’re� using� one� of� those�boring�rectangular�boxes�that�everyone�has�been�using�for�years,�are�you�making�the�best�first�impression�you�could�be�making?�Further,�do�those�enclosures�have�all�the�features�you need in an industrial instrument enclosure? Maybe it’s time�to�try�something�new�that�will�make�your�product�stand�out�from�the�crowd!
Why Use the Plastic Hawk Enclosure• The� Plastic� Hawk� Enclosure� is� a� rugged� enclosure�
specifically� designed� for� industrial� applications� and� has�the�features�to�prove�it
• Your� customers� will� appreciate� the� three� molded-in�threaded ¾" conduit connections that allows them to make tight and easy connections to the enclosure. They will also appreciate� the� molded� in� mounting� holes� and� grooved�back�for�easy�wall�or�2"�pipe�mounting.�Finally,�there�is�a�loop�next�to�the�Conduit�connection�for�customers�to�hang�their�tag�from.
• Customers� will� also� appreciate� the� wide� viewing� angle�the�enclosure�provides�so�they�can�read�your�display�way�beyond just straight on.
• Your�engineers�and�production�people�will�appreciate�the�molded-in� rails� that� make� it� easy� to� mount� electronics�close�to�the�window�as�well�as�the�four�mounting�bosses�on�the�base�of�the�enclosure.
• Best� of� all,� you� buy� the� enclosure� direct� from� the�manufacturer,�thus�saving�middleman�costs.
Complete Your Product with an Easy-To-Install Electronics Housing• The�plastic�Hawk�enclosure�is�available�with�an�electronics�
housing� insert�with� two�captive�screws�(model�PA1896) for�convenient�mounting�of�electronics
• Mounts�to�molded�in�rails�on�the�inside�of�the�enclosure�so�there�is�no�need�for�costly�and�unwieldy�stand-offs
• Designed�to�mount�as�close�to�the�window�as�possible�to�optimize�the�viewing�angle
• Mountable�at�any�90°�angle�so�you�don't�have�to�read�the�display�sideways�or�upside�down�in�complex�installations
Visit exdirect.biz for more details
Note:�The�electronics�housing�insert�also�fits�into�the�Explosion-Proof�Hawk�enclosure,which�means�that�you�can�market�to�both�hazardous�and�safe�areas�with�the�same�product.�
NEMA�4X�IP66rated�plastic�enclosure
2"�flange�mounting
Maximized�viewing�angle�and large window size
4�molded-in�mounting rails Electronics
housing insert mounts right on mounting rails
Clear�plastic�window
4 mountingbosses
Tamper-proof�seal holes
Center�grooved�back�makes�it easy to secure against pipe�when�mounting
(T2)�side�conduit� hole connections
Two recessed label galleries
Instrument tag�loop
(T1)�top�conduit� hole connection
HAWK ENCLOSURE NEMA 4X PLASTIC INSTRUMENT HOUSINGA PRECISION DIGITAL BRAND
www.exdirect.biz
LDSExDirectPLHWK_C�����03/19
A PRECISION DIGITAL COMPANY
ExDirect - A Precision Digital Brand 233 South Street • Hopkinton, MA 01748 USATel (774) 233-7061 • Fax (508) 655-8990
Dimensions
DisclaimerThe�information�contained� in�this�document� is�subject� to�change�without�notice.�Precision�Digital�Corporation� makes� no� representations� or� warranties� with� respect� to� the� contents� hereof,� and�specifically�disclaims�any�implied�warranties�of�merchantability�or�fitness�for�a�particular�purpose.��©�2017-2019�Precision�Digital�Corporation.�All�rights�reserved.
Units: inches [mm]
PDAPLUG75P 3/4" NPT Plastic Conduit PlugThe�PDAPLUG75P�conduit�plug�is�designed�to�be�used�to�cap�off�unused�conduit�openings�on�the�plastic�Hawk�enclosure.
SpecificationsMaterial:�UL94V-2�polycarbonate�plastic�with�UV�StabilizersColor: GreyRecessed Label Galleries: (Two)�Fits�label�size�2.4"�×�0.9"� [61.0�×�22.9�mm]Instrument Tag Loop:�Located�next�to�T1�ConnectionInternal Mounting Bosses:�#6-32�x�1/4"�deep�drilled�and�tapped�(standard)O Ring: Buna NWindow Size: 3.33" [84.5mm] diameterExternal Mounting Holes: Two�0.33"�[8.4mm]Conduit Connections: (3)�¾"�NPTWeight:�1.4�lbs�(0.64�kg)Rating: NEMA�4X�/�IP66Country of Origin: USA
Ordering InformationHawk - Plastic Enclosure
EC500-PL-W-07-GY NEMA�4X�Plastic�Instrument�Enclosure
Hawk - Plastic Enclosure Accessories
PA1896 Hawk�Plastic�Electronics�Housing�with�two�captive�screws
PDAPLUG75P 3/4"�NPT�Plastic�Conduit�Plug
A PRECISION DIGITAL COMPANY
Get the Hawk Enclosure in
Explosion-Proof
Visit exdirect.biz for details.
Recommended