Motion capturing Exporting MAT files September 2014

Motion capturing

Exporting MAT files

September 2014

Post process of Kinect data in detail 1. Install NuiCapture (Commercial SW for motion capture and data process of Kinect)

- file and SW key will be provided separately

2. Manual annotation of trials

2-1. Open file 2-2. Select preview video 2-3. Play Video

Post process of Kinect data in detail

2-4. Check frame number when the light of syncronizer is on

2-5. Type the frame number in Excel data sheet

Post process of Kinect data in detail

2-6. Take five trials from the last trial type the frame number into excel sheet

2-7. Check the frame number of current ‘end’ is smaller than ‘Start’ of next trial

<

Post process of Kinect data in detail 3. Exporting data by trial

3-1. Select ‘Export’ and set a folder to save processed data3-2. Select’ for example, Trial1

3-3. Select ‘Export Format’ as MAT

Post process of Kinect data in detail

3-4. deselect ‘Audio/Export’ 3-5. Type Start and End frame to export

3-6. Press export button

Post process of Kinect data in detail 4-1 check file size of mat file is almost 6MB each4-2 check last digit of mat file are consistent with frame number

5- Repeat this process for other Trials