View
228
Download
1
Category
Preview:
Citation preview
MechCaL (Pty) Ltd (Reg. No. 2005/0014445/07)
15kW
MINE VENTILATION JET FAN - SPECS
FEATURES
JET FAN
EXPLODED VIEW
igh H• Efficiency throw better noise, low outlet, nozzle Dual•
Anti• 2011/63739) (Pat.System Vibration • Patented Rotor Assembly • Optimal Fluid Dynamics CFD -
Removable• Option Skid • Long Meantime Between Failure • Warranty For 18 Months• Anti Corrosive Coatings• Pad Mount Motors• Modular Construction
M C 5 7 0 J F - 1 5 - 2
D
E
F
C
B
A
321 5
C
D
4 6 7 8
A
B
E
DESCRIPTION:
PART NUMBER:SURFACE TREATMENT:
+- 1.0 mm
DO NOT SCALE DRAWING
07/22/2014 P010-A-MM-0001-01
P010 - FAN ASSEMBLY - V1
MechCaLSHEET 1 OF 1
GEN. TOL:
DRAWN BY:M Minges
PROPERTY OF:
UNLESS OTHERWISE SPECIFIED ALL DIMENTIONS ARE IN MILLIMETERS.
DEBUR AND BREAK ALL SHARP EDGES.
PRODUCT CODE IS MADE UP AS FOLLOWS:e.g. Product name: MC570JF-15-2-50-525-CI-DN MC 57
– MechCaL0
15 – Fan diameter (mm)
– Power rating (kW)2 – Poles50 – Frequency (Hz)525CI
– Volts (V - Conical
DualSkid
Nozzle Inlet
DN SK
–
–
CI - Conical InletDI - Ducted InletDO - Ducted OutletFO - Free OutletN - NoDNSK Skid -
Nozzle Dual - zzle
* 01 – Low pressure 02 – Medium pressure 03 – High pressure
Aerodynamicallydesigned nose fairing for optimal flow for high efficiency and noise reduction
Patented Motor supports reduce vibrations and increase motor life
Cast EN 19 Steelaerodynamically designed rotor blades
Re-inforced front grill mesh (50mm x 50mm)
Gel coats for wear resistance on composite parts ; Silicon Carbide or Polyurethane
Conical inlet for free inlet installations
Aerofoil composite stator blades
Pad Mount Motor -380V 525V 1000V
Dual Nozzle
Tail cone assists with operational static pressure recovery
Multiple barrel sections to enable modular design capability :a. Common partsb. Assisting in reduction of assembly time & cost c. Structurally optimised
T: +27 (0) 12 755 8307 | E: info@mechcal.co.za | W: www.mechcal.co.za
MINE VENTILATION JET FAN - CURVES
Recommended