View
14
Download
0
Category
Preview:
Citation preview
17.8453
.6
HOLE16
642.5
40015.7
41316.3
40015.7
15.8402
11 16X.44
14 18X.56 1.0
25 34X
42.61083
27.6
SUSPENSION POINTS701
291
POINTSSUSPENSION
2550SUSPENSION POINTS
100.4
813SUSPENSION POINTS
32.0
11.4
32.0
SUSPENSION POINTS813
115.82942 1.0
25
LTMB24-X4-RK
4 SpeakersBose MB24
1ST TIERLTMB24-X4-RK
3 PER ADDITIONAL TIERLTMB24-ROD-KT
2ND TIERLTMB24-X4-RK
1X4
LTMB24 SeriesUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, four-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming asixteen piece sub array. Each frame is equipped with load rated riggingpoints and accommodations for multiple tiered compression rods.
LTMB24 1X4
Sub Array RigUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, two-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming an eightpiece sub array. Each frame is equipped with load rated rigging pointsand accommodations for multiple tiered compression rods.
To add additional tiers, order the LTMB24-ROD-KT, three kits per tier, maximum of four tiers.
WARNING: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installedloudspeakers can result in property damage, personal injury and/or liability to the installing contractor.
ALWAYS USE SAFETY CABLES. MADE IN THE USA
A division of:
1637 E. Burnett StreetSignal Hill, CA 90755 USA
PH: 562.424.2200 FX: 562.424.1127
ADAPTIVE TECHNOLOGIES GROUP
LTMB24 1X4
BOSE SUB ARRAY KIT
Unique attributes of the Bose MB24 low frequency sub woofer require specific interdependent physical relationships when arraying these cabinets together. ATM Fly-Ware’s LTMB24 overhead truss system is an efficient light-weight suspension frame that places these cabinets into their acoustically correct horizontal position and allows them to be aimed and suspended as one structure, four-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24 overhead truss system comes with threaded compression rods that secure it to a second frame. Additional frames and compression rods allow for more tiers, vertically, up to four cabinets deep, forming a sixteen piece sub array. Each frame is equipped with load rated rigging points and accommodations for multiple tiered compression rods.
To add additional tiers, order the LTMB24-ROD-KT, three kits per tier, maximum of four tiers.
Adaptive Technologies Group1635 E. Burnett Street | Signal Hill, CA 90755 USAPh: 562.424.1100 | Fax: 562.424.3520www.adapttechgroup.com
ALWAYS INSTALL SAFETY CABLES
WARNING: Mounting and/or suspension of audio and video equipment requires experienced professionals. Improperly installed loudspeakers can result in property damage, personal injury and/or liability to the installing contractor.
SUB ARRAY RIG
17.8453
.6
HOLE16
642.5
40015.7
41316.3
40015.7
15.8402
11 16X.44
14 18X.56 1.0
25 34X
42.61083
27.6
SUSPENSION POINTS701
291
POINTSSUSPENSION
2550SUSPENSION POINTS
100.4
813SUSPENSION POINTS
32.0
11.4
32.0
SUSPENSION POINTS813
115.82942 1.0
25
LTMB24-X4-RK
4 SpeakersBose MB24
1ST TIERLTMB24-X4-RK
3 PER ADDITIONAL TIERLTMB24-ROD-KT
2ND TIERLTMB24-X4-RK
1X4
LTMB24 SeriesUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, four-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming asixteen piece sub array. Each frame is equipped with load rated riggingpoints and accommodations for multiple tiered compression rods.
LTMB24 1X4
Sub Array RigUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, two-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming an eightpiece sub array. Each frame is equipped with load rated rigging pointsand accommodations for multiple tiered compression rods.
To add additional tiers, order the LTMB24-ROD-KT, three kits per tier, maximum of four tiers.
WARNING: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installedloudspeakers can result in property damage, personal injury and/or liability to the installing contractor.
ALWAYS USE SAFETY CABLES. MADE IN THE USA
A division of:
1637 E. Burnett StreetSignal Hill, CA 90755 USA
PH: 562.424.2200 FX: 562.424.1127
ADAPTIVE TECHNOLOGIES GROUP
17.8453
.6
HOLE16
642.5
40015.7
41316.3
40015.7
15.8402
11 16X.44
14 18X.56 1.0
25 34X
42.61083
27.6
SUSPENSION POINTS701
291
POINTSSUSPENSION
2550SUSPENSION POINTS
100.4
813SUSPENSION POINTS
32.0
11.4
32.0
SUSPENSION POINTS813
115.82942 1.0
25
LTMB24-X4-RK
4 SpeakersBose MB24
1ST TIERLTMB24-X4-RK
3 PER ADDITIONAL TIERLTMB24-ROD-KT
2ND TIERLTMB24-X4-RK
1X4
LTMB24 SeriesUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, four-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming asixteen piece sub array. Each frame is equipped with load rated riggingpoints and accommodations for multiple tiered compression rods.
LTMB24 1X4
Sub Array RigUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, two-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming an eightpiece sub array. Each frame is equipped with load rated rigging pointsand accommodations for multiple tiered compression rods.
To add additional tiers, order the LTMB24-ROD-KT, three kits per tier, maximum of four tiers.
WARNING: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installedloudspeakers can result in property damage, personal injury and/or liability to the installing contractor.
ALWAYS USE SAFETY CABLES. MADE IN THE USA
A division of:
1637 E. Burnett StreetSignal Hill, CA 90755 USA
PH: 562.424.2200 FX: 562.424.1127
ADAPTIVE TECHNOLOGIES GROUP
1 deep x 4 wideLTMB24-X4-RK(4 WIDE)1 Frame per kit
17.8453
.6
HOLE16
642.5
40015.7
41316.3
40015.7
15.8402
11 16X.44
14 18X.56 1.0
25 34X
42.61083
27.6
SUSPENSION POINTS701
291
POINTSSUSPENSION
2550SUSPENSION POINTS
100.4
813SUSPENSION POINTS
32.0
11.4
32.0
SUSPENSION POINTS813
115.82942 1.0
25
LTMB24-X4-RK
4 SpeakersBose MB24
1ST TIERLTMB24-X4-RK
3 PER ADDITIONAL TIERLTMB24-ROD-KT
2ND TIERLTMB24-X4-RK
1X4
LTMB24 SeriesUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, four-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming asixteen piece sub array. Each frame is equipped with load rated riggingpoints and accommodations for multiple tiered compression rods.
LTMB24 1X4
Sub Array RigUnique attributes of the Bose MB24 low frequency sub woofer requirespecific interdependent physical relationships when arraying thesecabinets together. ATM Fly-Ware’s LTMB24 overhead truss system isan efficient light-weight suspension frame that places these cabinetsinto their acoustically correct horizontal position and allows them to beaimed and suspended as one structure, two-wide, quickly and easily.
In addition to being secured into the MB24 threaded fittings, the LTMB24overhead truss system comes with threaded compression rods thatsecure it to a second frame. Additional frames and compression rodsallow for more tiers, vertically, up to four cabinets deep, forming an eightpiece sub array. Each frame is equipped with load rated rigging pointsand accommodations for multiple tiered compression rods.
To add additional tiers, order the LTMB24-ROD-KT, three kits per tier, maximum of four tiers.
WARNING: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installedloudspeakers can result in property damage, personal injury and/or liability to the installing contractor.
ALWAYS USE SAFETY CABLES. MADE IN THE USA
A division of:
1637 E. Burnett StreetSignal Hill, CA 90755 USA
PH: 562.424.2200 FX: 562.424.1127
ADAPTIVE TECHNOLOGIES GROUP
4 SPEAKERS - BOSE MB24
Recommended