View
2
Download
0
Category
Preview:
Citation preview
LEED v4 and Sustainability Resources
Effective 9/5/2017
Expanding Your Solutions
Table of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
CEMCO’s Environmental Products Declaration (EPD)
Cold-Formed Steel Framing Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–14 (Structural Stud and Track Products; Interior Non-Load Bearing Stud and Track Products; ViperStud® Non-Load Bearing Stud and Track Products; Interior Drywall Framing, Furring, and Resilient Channels; Cornerbeads, Trims, and Control/Expansion Joints; Clips, Connectors, and Channels; CST, SLP-TRK® & FAS Track 1000® Head of Wall Products; ProX Header® and ProX Rough Opening Products; Sure-Span® Steel Floor Framing Products; Sure-Board® for Shear Products; USG SHAFTWALL® Products; USG Area Separation Wall Products; Expanded Metal Lath Products; Lath and Plastering Accessories)
CEMCO’s Health Product Declarations (HPD)
Health Product Declaration for CEMCO Structural Curtain Wall Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15–19
Health Product Declaration for CEMCO ViperStud® and ViperTrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20–24
Health Product Declaration for CEMCO ProX Header® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–29
Health Product Declaration for CEMCO SureSpan® Floor Joists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30–34
Health Product Declaration for CEMCO Head of Wall Slotted Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35–39
Health Product Declaration for CEMCO Sure-Board® 200 and 200B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40–47
Health Product Declaration for CEMCO Sure-Board® 200W MDF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48–55
Health Product Declaration for CEMCO Metal Lath — No Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56–59
Health Product Declaration for CEMCO Metal Lath — D-Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60–66
Health Product Declaration for CEMCO Metal Lath — K-Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67–72
Health Product Declaration for CEMCO USG Shaft Wall Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73–76
Health Product Declaration for CEMCO USG Area Separation Wall Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77–81
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 3
Introduction
LEED v4CEMCO® is pleased to join the efforts of the U.S. Green Building Council and LEED® program that improves environmental and eco-nomic performance of commercial, industrial and residential buildings. The LEED® program certifies buildings that meet standards utilizing energy, environmental design, and products as defined the LEED® rating system. The use of CEMCO products can help contribute points in specific categories. CEMCO’s products contain the following percent-ages of recycled steel content:
• Total Recycled Content: 36.9%.
• Post-Consumer: 19.8%.
• Pre-Consumer: 14.4%.
LEED v4 for Building & Design Construction (effective October 31, 2016)• MR Prerequisite: Construction and Demolition Waste
Management Planning.
• MR Credit: Construction and Demolition Waste Management.
• MR Credit: Building Product Disclosure and Optimization — Sourcing of Raw Materials, Option 2.
• MR Credit: Building Product Disclosure and Optimization — Environmental Product Declarations, Options 1 & 2.
• MR Credit: Building Product Disclosure and Optimization — Material Ingredients, Option 1.
• MR Credit: Building Life-Cycle Impact Reduction, Option 4.
CEMCO’s Environmental Product Declaration (EPD)CEMCO is one of the few manufacturers of cold-formed steel framing and metal lath products and accessories to offer our own EPD for your use in qualifying for LEED v4 certification. Submitting CEMCO’s EPD on your project can double the points awarded. CEMCO’s Environmental Product Declaration (EPD) covers the following products:
• Structural Stud and Track Products.
• Interior Non-Load Bearing Stud and Track Products.
• ViperStud® Non-Load Bearing Stud and Track Products.
• Interior Drywall Framing, Furring, and Resilient Channels.
• Cornerbeads, Trims, and Control/Expansion Joints.
• Clips, Connectors, and Channels.
Introduction | LEED v4 and Sustainability Resources
• CST, SLP-TRK® & FAS Track 1000® Head of Wall Products.
• ProX Header® and ProX Rough Opening Products.
• Sure-Span® Steel Floor Framing Products.
• Sure-Board® for Shear Products.
• USG SHAFTWALL® Products.
• USG Area Separation Wall Products.
• Expanded Metal Lath Products.
• Lath and Plastering Accessories.
CEMCO’s Health Product Declarations (HPD)To provide you with the most accurate and transparent information about our products, CEMCO has published the following Health Prod-uct Declarations (HPD’s) for you to include in your LEED v4 applications. Each HPD is specific to one of the several product groups CEMCO’s manufactures right here in the United States at one of our four state-of-the-art manufacturing facilities. As we continue to expand our product lines by introducing new and innovative products and systems, we will add their HPD’s to this list below:
• Health Product Declaration for CEMCO Structural Curtain Wall Studs.
• Health Product Declaration for CEMCO ViperStud® and ViperTrack.
• Health Product Declaration for CEMCO ProX Header®.
• Health Product Declaration for CEMCO SureSpan® Floor Joists.
• Health Product Declaration for CEMCO Head of Wall Slotted Tracks.
• Health Product Declaration for CEMCO Sure-Board® 200 and 200B.
• Health Product Declaration for CEMCO Sure-Board® 200W MDF.
• Health Product Declaration for CEMCO Metal Lath — No Paper.
• Health Product Declaration for CEMCO Metal Lath — D-Paper.
• Health Product Declaration for CEMCO Metal Lath — K-Paper.
• Health Product Declaration for CEMCO USG Shaft Wall Systems.
• Health Product Declaration for CEMCO USG Area Separation Wall Systems.
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.23624
ENVIRONMENTAL PRODUCT DECLARATION
61TCOLD-FORMED STEEL FRAMING SYSTEMSSTRUCTURAL STUD AND TRACK, VIPERSTUDP
®P INTERIOR FRAMING, PROX HEADER P
®P,
SUREBOARDP
®P, SURE-SPAN P
®P FLOOR JOIST FRAMING SYSTEM, CST, SLP-TRKP
®P, FAS
TRACKP
®P 1000 SLOTTED TRACKS, USG SHAFTWALL CH/H-STUD STUDS AND TRACK
56TCEMCO’s Sure-Span P
®P and cold-formed steel framing products installed in a mid-rise
project in San Francisco, home to 5% of the world's LEED certified projects.
CEMCO produces a complete line of steel framing products in its four U.S.
manufacturing facilities, primarily from American-made steel.
62TCalifornia Expanded Metal
Products Co., more commonly
known as CEMCOP®P, is your
premier source for steel framing
products, metal lath products, and
plastering accessories. All CEMCO
products are made in the USA in
one of our four state-of-the-art
manufacturing facilities.
62TSteel, one of the world’s most
recycled materials, is the basis for
all of CEMCO’s products, which
are manufactured from mill-
certified hot-dip galvanized steel,
giving the industry confidence that
CEMCO’s products are among the
best choice for your green building
needs.
62TFor additional information, visit
www.cemcosteel.com.
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 5
Cold-Formed Steel Framing, Metal Lath and AccessoriesCold-Formed Steel Framing Systems According to ISO 14025
This declaration is an environmental product declaration (EPD) in accordance with ISO 14025. EPDs rely
on Life Cycle Assessment (LCA) to provide information on a number of environmental impacts of products
over their life cycle. UExclusions U: EPDs do not indicate that any environmental or social performance
benchmarks are met, and there may be impacts that they do not encompass. LCAs do not typically address
the site-specific environmental impacts of raw material extraction, nor are they meant to assess human health toxicity.
EPDs can complement but cannot replace tools and certifications that are designed to address these impacts and/or set
performance thresholds – e.g. Type 1 certifications, health assessments and declarations, environmental impact
assessments, etc. UAccuracy of Results U: EPDs regularly rely on estimations of impacts, and the level of accuracy in
estimation of effect differs for any particular product line and reported impact. UComparabilityU: EPDs are not comparative
assertions and are either not comparable or have limited comparability when they cover different life cycle stages, are
based on different product category rules or are missing relevant environmental impacts. EPDs from different programs
may not be comparable.
PROGRAM OPERATOR UL Environment DECLARATION HOLDER CEMCODECLARATION NUMBER 4787356941.101.1
DECLARED PRODUCT
REFERENCE PCR SCS PCR for Designated Steel Construction Products v1 2015DATE OF ISSUE July 13, 2016PERIOD OF VALIDITY 5 Years
CONTENTS OF THE DECLARATION
Product definition and information about building physics
Information about basic material and the material’s origin
Description of the product’s manufacture
Indication of product processing
Information about the in-use conditions
Life cycle assessment results
Testing results and verifications
The PCR review was conducted by: PCR Review Panel Chair: Thomas Gloria
This declaration was independently verified in accordance with ISO 14025 by Underwriters Laboratories
☐ INTERNAL ☒ EXTERNAL Wade Stout, UL Environment
This life cycle assessment was independently verified in accordance with ISO 14044 and the reference PCR by:
Thomas Gloria, Industrial Ecology Consultants
Cold-Formed Steel Framing Systems
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.23626
Cold-Formed Steel Framing, Metal Lath and AccessoriesCold-Formed Steel Framing Systems According to ISO 14025
Product Definition
Company Description
Since 1974, CEMCO P
®P has taken a leadership role to provide you the most advanced products and systems for steel
framing and metal lath construction. Delivering the safest products we can produce, such as the new Safety Edged P
®P
steel framing products, gives you safer handling of framing products on your trucks, in your yards, and on your jobsites. CEMCO P
®P also manufactures FAS Track P
®P 1000, DDAP
®P angles, and slotted track for your fire-rated head-of-wall
applications. Other innovations such as SureBoard P
®P for shear-walls, Sure-SpanP
®P steel floor joists and the ProX
Header P
®P and ProX Rough-Opening framing systems are also available to help complete your environmentally
responsible project. CEMCO’s four state-of-the-art manufacturing facilities are located in City of Industry, CA (Metropolitan Los Angeles); Denver, CO; Ft. Worth, TX; and Pittsburg, CA (Oakland/San Francisco Bay Area).
Product Description
The CEMCO P
®P steel framing & metal lath products covered by this EPD are:
Structural Stud and Track (ICC-ES ESR 3016)
Manufactured for the use in curtain wall, load-bearing,
rough-opening & ceiling/floor/roof applications
Available in typical c-shaped sections ranging in thickness
from 33 mils to 118 mils
ViperStud P
®P Interior Framing (ICC-ES ESR 2620 & ATI-ES 0154)
Proprietary interior framing system using high-strength steel to increase overall
performance
Available in c-shaped sections ranging in thickness from 15 mils to 33 mils
ProX Header P
®P (IAPMO ER-0286)
Proprietary header/rough-opening system designed to use less material and increase
safety
Available in sections ranging in thickness from 33 mils to 68 mils
Material & Coatings:
CEMCO®
uses only hot-dip
galvanized steel
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 7
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
SureBoard P
®P for Shear panels (IAPMO ER-0126)
Steel sheet/gypsum sheathing product designed specifically for wall shear applications
Sure-Span P
®P Floor Joist Framing System (ESR PENDING)
Proprietary steel floor joist/roof rafter framing system with extra-large flared punch-outs
for greater access of HVAC, MEP, and TELCOM conduits
Available in proprietary c-shaped sections ranging in thickness from 43 mils to 97 mils
CST, SLP-TRK P
®P, and FAS Track P
®P 1000 Brand Slotted Tracks (ICC-ES ESR 2012)
Head of Wall top tracks designed for seismic and fire-abatement assemblies
Available in c-shaped sections in thicknesses ranging from 33 mils to 68 mils
USG SHAFTWALL Brand CH and H-Stud Studs and Track (AER 09038)
USG’s CH studs and J-Runners for shaftwall and stairwell applications
USG’s H-Stud and C-Runner for area separation wall assemblies
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.23628
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
Expanded Metal Lath Products (ICC-ES ESR 1623)
Manufactured for the use in exterior and interior applications for 3-coat stucco
assemblies
Available in various flat, self-furred, ribbed, and paper-backed versions
Plastering Accessories (ICC-ES ESR 1623*)
Various profiles used in conjunction with expanded metal lath products
Products designed and manufactured for casing, corners, control joints, expansion
joints, screeds, and weeps
Drywall/Interior Accessories (ICC-ES ESR 3016*)
Product designed for use with interior non-load bearing stud framing systems
Products include angles, drywall finishing trims, flat straps, furring channels, and
resilient channels
Connectors, Clips, and Channels (ICC-ES ESR 3016*)
Various connectors and clips used for connecting structural and non-structural steel
framing components
Products included are clip angles, corner angles/ledgers, diagonal tension strapping,
gusset plates, slide clips, and u-shaped channels
* Select products, see report for details
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 9
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
Manufacturing Steps
The manufacturing steps for CEMCO® steel framing systems are shown in the flow diagram below.
Framing System Options
PRODUCT SIZES THICKNESS (MILS)
Structural 1-5/8” – 14” Stud & Track 33, 43, 54, 68, 97, 118
ViperStudP
® 1-5/8” – 6” Stud & Track 15, 20, 21, 30, 33
ProX HeaderP
® 3-5/8” – 8” Headers & Inserts 33, 43, 54, 68
SureBoardP
® 48” x 96”, 108”, 120”, or 144” 27
Sure-SpanP
® 7-1/4” – 14” Joists and Rim-Track 33, 43, 54, 68, 97
CST, SLP-TRKP
®P, and FAS TrackP
®P 1000 2-1/2” – 8” Slotted Tracks 33, 43, 54, 68
USG SHAFTWALL Brand CH and H-Stud Studs and Track
2-1/2” – 6” CH & H-Studs, J-Runner & C-Runner 18, 24, 33, 34
Expanded Metal Lath 27-1/2” x 48” or 96” 1.75, 2.5, or 3.4 lbs/ydP
2
Plastering Accessories Various 18 through 33
Drywall Interior Accessories Various 11 through 33
Connectors, Clips, and Channels Various 33, 43, 54, 68, 97, 118
Coil Slitting
Decoiling
Slitting
Recoiling
Roll Forming Packaging Loading
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236210
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
Application and Codes of Practice
Material Specification (ASTM)
ViperStudP
®P Nonstructural Framing Members and Accessories A653/A1003
Structural Framing Members and Accessories A653/A1003
ProX Header P
®P Framing Members and Accessories A653/A1003
SureBoardP
®P A653/A1003
Sure-SpanP
®P Framing Members and Accessories A653/A1003
CST, SLP-TRKP
®P & FAS Track 1000P
®P Slotted Tracks A653/A1003
USG Shaftwall Members A653/A1003
Expanded Metal Lath Products A653/A1003
Plastering Accessories A653/A1003
Product Specification (ASTM)
Drywall Nonstructural Framing Members and Accessories C645
Structural Framing Members and Accessories C955
ProX Header P
®P Framing Members and Accessories C955
SureBoardP
®P C645
Sure-SpanP
®P Framing Members and Accessories C955
CST, SLP-TRKP
®P & FAS Track 1000P
®P Slotted Tracks C645
USG Shaftwall Members C645
Expanded Metal Lath Products C847
Plastering Accessories C1047
Coating Specification (ASTM)*
ViperStudP
®P Nonstructural Framing Members and Accessories A653/A924/A1003
Structural Framing Members and Accessories A653/A924/A1003
ProX Header P
®P Framing Members and Accessories A653/A924/A1003
SureBoardP
®P A653/A924
Sure-SpanP
®P Framing Members and Accessories A653/A924/A1003
CST, SLP-TRKP
®P & FAS Track 1000P
®P Slotted Tracks A653/A924/A1003
USG Shaftwall Members A653/A924/A1003
Expanded Metal Lath Products A653/A924/A1003
* CEMCOP
®P ONLY USES HOT-DIP GALVANIZED
CEMCO® products
are not expected to
create exposure
conditions that
exceed safe
thresholds for
health impacts to
humans or
flora/fauna under
normal operating
conditions.
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 11
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
Life Cycle Assessment – Product System and Modeling
A “cradle-to-gate” analysis using life cycle assessment (LCA) techniques was conducted for this EPD. The analysis was done according to the product category rule (PCR) for Designated Steel Construction Products and followed LCA principles, requirements and guidelines laid out in the ISO 14040/14044 standards. As such, EPDs of construction products may not be comparable if they do not comply with the same PCR. While the intent of the PCR is to increase comparability, there may still be differences among EPDs that comply with the same PCR (e.g., due to differences in system boundaries, background data, etc.).
Declared Unit
The declared unit for an EPD is one metric ton of steel construction product.
System Boundaries
The “cradle-to-gate” life cycle stages represent the product stage (information modules A1-A3) and include
A1: all extraction and processing of raw materials; any reuse of products or materials from a previous product system; processing of secondary materials; and any energy recovery or other recovery processes from secondary fuels;
A2: all transportation to the factory gate and all internal transport;
A3: production of all ancillary materials, pre‐products, products, and co‐products, including any packaging; generation of electricity from primary energy resources, including upstream processes.
Product Stage Construction Stage
Use Stage End-of-Life Stage
A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 C1 C2 C3 C4
Raw
ma
teri
als
su
pp
ly
Tra
ns
po
rt
Ma
nu
fac
turi
ng
Tra
nsp
ort
Insta
llatio
n
Use
Ma
inte
nan
ce
Rep
air
Rep
lace
me
nt
Refu
rbis
hm
en
t
De
-
co
nstr
uction
Tra
nsp
ort
Wa
ste
pro
cessin
g
Dis
posa
l
This EPD represents 2012 steel framing production by CEMCO in four US plants (City of Industry and Pittsburg, CA; Denver, CO; and Forth Worth, TX).
Name Required Unit Optional Unit
Declared Unit metric ton short ton
Density kg/m P
3 lb/ftP
3
EXCLUDED FROM THIS STUDY
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236212
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
Assumptions
No significant assumptions have been made. All of the raw materials and energy inputs have been modeled using processes and flows that closely follow actual production raw materials and processes. All of the material and energy flows have been accounted.
Allocation
No multi-output (i.e., co-product) allocation was performed in this study. Allocation of background data (energy and materials) taken from the GaBi 2016 databases is documented online at http://www.gabi-software.com/international/support/gabi/.
Cut-off Criteria
The cut-off criteria for including or excluding materials, energy and emissions data of the study are as follows:
Mass: If a flow is less than 1% of the cumulative mass of the model it may be excluded, providing its environmental relevance is not a concern.
Energy: If a flow is less than 1% of the cumulative energy of the model it may be excluded, providing its environmental relevance is not a concern.
Environmental relevance: If a flow meets the above criteria for exclusion, yet is thought to potentially have a significant environmental impact, it was included.
No processes were neglected or excluded. Capital items for the production processes (machines, buildings, etc.) were not taken into consideration.
Transportation
UInbound: For hot-dip galvanized steel inputs, a weighted average transport distance was applied based on each plant’s fraction of total production and based on each plant’s primary steel supplier’s location. As a result, the weighted average distance is 315 miles by rail and 11 miles by heavy-duty truck. Lubricant, propane and packaging inputs were each assigned an estimated transport distance of 100 miles.
UOutbound: U Transport distances to local waste management sites were estimated at 20 miles. Transportation to distribution centers or installation sites falls outside of the scope of this “cradle-to-gate” study.
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 13
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
Other Environmental Information
Parameter Unit Value
Hazardous waste disposed metric ton 5.21E-10
Non-hazardous waste disposed metric ton 1.09E-04
Radioactive waste disposed metric ton 6.00E-04
Components for re‐use metric ton 0
Materials for recycling metric ton 5.02E-02
Materials for energy recovery metric ton 0
Exported energy MJ per energy carrier 0
Visualization of Life Cycle Impact Assessment
The diagrams below illustrate the degree to which the modules drive the major impact categories.
Data Quality Assessment
Temporal representativeness: All primary data were collected for the year 2012. All secondary data come from the GaBi 2016 databases and are representative of the years 2007-2015. Therefore, temporal representativeness is warranted. Geographical representativeness: All primary and secondary data were collected specific to the countries or regions under study. Where country-specific or region-specific data were unavailable, proxy data were used. Geographical representativeness is considered to be high. Technological representativeness: All primary and secondary data were modeled to be specific to the technologies or technology mixes under study. Where technology-specific data were unavailable, proxy data were used. Technological representativeness is considered to be high. Precision: As the majority of the relevant foreground data are measured data or calculated based on primary information sources of the owner of the technology, precision is considered to be high. All background data are sourced from GaBi databases with the documented precision.
Primary Energy Demand from Non-Renewable Resources
A1 A2 A3
95%
96%
97%
98%
99%
100%
GWP ODP AP EP POCP
Impact Assessment Categories
A1 A2 A3
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236214
Cold-Formed Steel Framing, Metal Lath and Accessories Cold-Formed Steel Framing Systems
According to ISO 14025
Disclaimer: This Environmental Product Declaration (EPD) conforms to ISO 14025, ISO 14040, ISO 14044, and ISO 21930.
Scope of Results Reported: The PCR requires the reporting of a limited set of LCA metrics; therefore, there may be relevant environmental impacts beyond those disclosed by this EPD. The EPD does not indicate that any environmental or social performance benchmarks are met nor thresholds exceeded.
Accuracy of Results: This EPD has been developed in accordance with the PCR applicable for the identified product following the principles, requirements and guidelines of the ISO 14040, ISO 14044, ISO 14025 and ISO 21930 standards. The results in this EPD are estimations of potential impacts. The accuracy of results in different EPDs may vary as a result of value choices, background data assumptions and quality of data collected.
Comparability: EPDs are not comparative assertions and are either not comparable or have limited comparability when they cover different life cycle stages, are based on different product category rules or are missing relevant environmental impacts. Such comparisons can be inaccurate, and could lead to the erroneous selection of materials or products which are higher‐impact, at least in some impact categories. Any comparison of EPDs shall be subject to the requirements of ISO 21930. For comparison of EPDs which report different module scopes, such that one EPD includes Module D and the other does not, the comparison shall only be made on the basis of Modules A1, A2 and A3. Additionally, when Module D is included in the EPDs being compared, all EPDs must use the same methodology for calculation of Module D values.
Contact Information
CEMCO Technical Services Department: (800) 416-2278
LCA Development
The EPD and background LCA were prepared with support from thinkstep, Inc.
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 15
Structural / Curtain Wall Studs & Track
by CEMCO ®
Health
Product
Declaration
v2.0
CLASSIFICATION: 05 40 00 METALS (BEAMS): COLD-FORMED METAL FRAMINGcreated via: HPDC Online
Builder
PRODUCT DESCRIPTION: CEMCO EXTERIOR STRUCTURAL STUDS AND TRACK ARE MANUFACTURED FROM MILL CERTIFIED
GALVANIZED PRIME STEEL, AND ARE DESIGNED FOR USE IN CURTAIN-WALL AND LOAD BEARING APPLICATIONS.
THICKNESSES RANGE FROM 33 MIL (20 GA) TO 118 MIL (10 GA). FLANGE OR LEG SIZES FOR BOTH STUDS AND TRACK
RANGE FROM 1 ¼” TO 3 ½”. THESE PRODUCTS ARE PRODUCED WITH A STANDARD G60 COATING, BUT ARE ALSO
AVAILABLE WITH A G90 COATING UPON SPECIAL REQUEST. CEMCO'S STRUCTURAL FRAMING PRODUCTS ARE
MANUFACTURED TO THE STRICT TOLERANCES SET FORTH BY THE 2015 AND 2012 IBC, AND VERIFIED BY ICC-ES ESR-3016;
STRUCTURAL FRAMING MEMBERS & ACCESSORIES MATERIAL SPECIFICATION (ASTM) A1003/A653/A924; PRODUCT
SPECIFICATION (ASTM) C955; COATING SPECIFICATION (ASTM) A1003/A653/A924. ALL CEMCO PRODUCTS ARE
MANUFACTURED IN THE USA AT ONE OF OUR FOUR STATE-OF-THE-ART PRODUCTION FACILITIES STRATEGICALLY
LOCATED IN FOUR MAJOR METROPOLITAN MARKETS TO ENSURE THAT SERVICE AND QUALITY REQUIREMENTS ARE MET.
ALSO INCLUDES CSI MASTERFORMAT 05 12 23 METALS (BEAMS): STRUCTURAL STEEL FOR BUILDINGS.
Section 1: Summary
CONTENT
INVENTORY
Threshold per
material
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals and
impurities
considered in
1 of 1 materials
see Section 2:
Material Notes
see Section 5:
General Notes
Based on the selected Content Inventory Threshold:
Characterized....................................................
Are the Percent Weight and Role provided for all substances? Yes No
Screened.........................................................
Are all substances screened using Priority Hazard Lists with results
disclosed?
Yes No
Identified......................................................
Are all substances disclosed by Name (Specific or Generic) and
Identifier?
Yes No
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening
individual chemical substances against HPD Priority Hazard
Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will
expose individuals to its chemical substances or any health risk.
Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G60) [ STEEL UNK
ZINC LT-P1 | AQU | RES | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with
the HPD Standard version 2.0, and discloses hazards associated with all
substances present at or above 1000 parts per million (ppm) in the
finished product. Therefore, this HPD qualifies for the LEED v4 MR credit
Building Product Disclosure and Optimization: Material Ingredient
Reporting (Option 1).
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCEOther: ICC-ES Evaluation Report
Multi-attribute: Environmental Product Declaration
See Section 3 for additional listings.
Self-Published* VERIFIER: SCREENING DATE: December 1, 2016 EXPIRY DATE*: December 1, 2019
Third Party Verified VERIFICATION #: RELEASE DATE: December 1, 2016 * or within 3 months of significant change in product contents
*See HPDC website for details
Structural / Curtain Wall Studs & Track Health Product Declaration Page 1 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236216
Section 2: Content in Descending Order of Quantity
This section lists materials in a product and the substances in each material based on the Inventory Threshold for each material. If residuals or
impurities from the manufacturing or extraction processes are considered for a material, these are inventoried and characterized to the extent
described in the Material and/or General Notes. Chemical substances are screened against the HPD Priority Hazard Lists for human and
environmental health impacts. Screening is based on best available information; "Not Found" does not necessarily mean there is no potential
hazard associated with the product or its contents. More information about Priority Hazard Lists and the GreenScreen can be found online:
www.hpd-collaborative.org and www.greenscreenchemicals.org.
Structural / Curtain Wall Studs & Track Health Product Declaration Page 2 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 17
HOT-DIPPED GALVANIZED STEEL (G60) %: 100.0000 HPD URL:
Inventory Threshold: 1000 ppm Residuals Considered: Yes
Material Notes: Steel is considered a Generic Commodity Material by the Health Product Declaration Collaborative. Specific guidelines are being
created to address known issues related to transparency and disclosure for several materials (“Special Conditions”), including Metal Alloys such
as steel. This HPD will be updated as appropriate when the guidelines for Steel are released. No residuals or impurities are known or expected
to be present in this material above the inventory threshold indicated. Passivation coatings for corrosion resistance are an industry standard for
this type of material; however, the substances used for such coatings fall below the inventory threshold (0.1% or 1000 ppm) of the material, and
are therefore not reported here.
STEEL ID: 12597-69-2
%: 97.4000 - 99.1000 GS: UNK RC: Both NANO: NO ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced
from several domestic (USA) suppliers.
ZINC ID: 7440-66-6
%: 0.9000 - 2.6000 GS: LT-P1 RC: None NANO: NO ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
RESPIRATORY AOEC - Asthmagens Asthmagen (ARs) - sensitizer-induced - inhalable
forms only
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting
effects
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to
air
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H260 - In contact with water releases flammable
gases which may ignite spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing
(e.g. welding, sawing, etc) during installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for
Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-specifications.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
OTHER ICC-ES Evaluation Report
Structural / Curtain Wall Studs & Track Health Product Declaration Page 3 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236218
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA 91746 Pittsburg, CA 94565 Denver, CO
80204 Fort Worth, TX 76140
CERTIFICATE URL: www.icc-es.org/reports/pdf_files/ICC-ES/ESR-3016.pdf
CERTIFICATION AND COMPLIANCE NOTES: ESR-3016. Evaluation Subject: Cold-
formed Steel Framing. Evaluation Scope includes compliance with the following codes:
2015, 2012 International Building Code® (IBC); 2015, 2012 International Residential
Code® (IRC); 2013 California Building Code (CBC); 2013 California Residential Code
(CRC); 2014 and 2010 Florida Building Code—Building; 2014 and 2010 Florida Building
Code—Residential.
ISSUE
DATE:
2014-07-
01
EXPIRY
DATE:
2016-07-01
CERTIFIER OR
LAB: ICC
Evaluation Service
MULTI-ATTRIBUTEEnvironmental Product
Declaration
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental
Product Declaration covers the following CEMCO Cold-Formed Steel Framing Systems, including:
Structural Stud and Track (ICC-ES ESR 3016); ViperStud®P P Interior Framing (ICC-ES ESR 2620 &
ATI-ES 0154); ProX Header®P P (IAPMO ER-0286); SureBoard®P P for Shear panels (IAPMO ER-
0126); Sure-Span®P P Floor Joist Framing System (ESR PENDING); CST, SLP-TRK®P P, and FAS
Track®P P 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-Stud
Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering
Accessories (ICC-ES ESR 1623); Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips,
and Channels (ICC-ES ESR 3016).
ISSUE
DATE:
2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER
OR LAB:
UL
Environment
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
FURRING CHANNELS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: Used to furr-out during installation. As per ICC-ES Report
ESR-3016, "Furring channels are cold-formed from galvanized steel coils conforming to ASTM A1003, Nonstructural Grade 33 (NS33), with a
minimum metallic coating listed for Type NS in Table 1 of ASTM A1003."
U-CHANNELS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: Attach to studs during installation for bridging. According to
the ICC-ES Report ESR-3016: "U-channels are cold-formed from galvanized steel coils conforming to ASTM A653, SS Grade 33; or ASTM
A1003, Structural Grade 33, Type H (ST33H), with a minimum metallic coating listed for Type H and Type L in Table 1 of ASTM A1003."
Section 5: General Notes
Structural / Curtain Wall Studs & Track Health Product Declaration Page 4 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 19
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry, CA 91746
USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement) BM-2
Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient
information from List Translator lists to benchmark)
UNK Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other
Nano Composed of nanoscale particles or nanotechnology
Declaration Level
Self-declared Manufacturerʼs self-declaration (First Party)Independent Lab Manufacturerʼs self-declaration using results from an independent labSecond Party Verification by trade association or other interested party
Third Party Verification by independent certifier
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and
environmental health hazards. Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator, and when
available, full GreenScreen assessments. The HPD Open Standard does not provide an assessment of health impacts throughout the product life
cycle. It does not provide an assessment of exposure or risk associated with product handling or use. It also does not address potential health
impacts of: (i) substances used or created during the manufacturing process unless they remain in the nal product, or (ii) substances created after
the product is delivered for end use (e.g., if the product burns, degrades, or otherwise changes chemical composition).
The HPD Open Standard was created and is maintained and evolved by the Health Product Declaration Collaborative (the HPD Collaborative), a
customer-led organization composed of stakeholders throughout the building industry. The HPD Collaborative is committed to the continuous
improvement of building products through transparency, openness, and innovation throughout the product supply chain.
A disclosure completed in compliance with the HPD Open Standard is referred to as a “Health Product Declaration,” or “HPD.” The product
manufacturer and any applicable independent veri er are solely responsible for the accuracy of statements and claims made in this HPD and for
compliance with the HPD Open Standard noted.
Structural / Curtain Wall Studs & Track Health Product Declaration Page 5 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236220
ViperStud & ViperTrack
by CEMCO ®
Health
Product
Declaration
v2.0
CLASSIFICATION: 09 22 16.00 FINISHES: NON-STRUCTURAL METAL FRAMINGcreated via: HPDC
Online Builder
PRODUCT DESCRIPTION: THE VIPERSTUD® DRYWALL FRAMING SYSTEM OFFERS ALL THE BENEFITS OF CONVENTIONAL
FLAT STEEL STUDS WITH A DESIGN THAT PERFORMS EVEN BETTER. VIPERSTUDS AND VIPERTRACKS CONSIST OF 100% HOT-
DIP GALVANIZED STEEL, AND ARE USED FOR FRAMING OF INTERIOR NONLOAD-BEARING COMPOSITE AND NON-COMPOSITE
WALLS. VIPERTRACKS® ARE FABRICATED IN 1-5/8", 2-1/2", 3-5/8", 4", AND 6" WIDTHS WITH 1-1/4" LEGS FROM STANDARD G40
HOT-DIPPED GALVANIZED STEEL. VIPERSTUDS® ARE FABRICATED IN 1-5/8", 2-1/2", 3-5/8", 4", AND 6" WIDTHS FROM
STANDARD G40 HOT-DIPPED GALVANIZED STEEL; G60 AND G90 COATINGS ARE AVAILABLE UPON REQUEST. VIPER 25,
VIPER18 MIL, VIPER20 (.0195 MIN), VIPER20 (.0209 MIN), VIPER 30MIL, AND VIPER 33MIL MANUFACTURED BY CEMCO RECEIVED
AN EVALUATION REPORT (CCRR-0154) FROM ATI EVALUATION SERVICES AND AN EVALUATION REPORT (ESR-2620) FROM ICC
EVALUATION SERVICE (ICC-ES), PROVIDING EVIDENCE THAT THE VIPERSTUD DRYWALL FRAMING SYSTEM MEETS CODE
REQUIREMENTS. VIPERSTUD DRYWALL NONSTRUCTURAL FRAMING MEMBERS & ACCESSORIES MATERIAL SPECIFICATION
(ASTM) A1003/A653/A924; PRODUCT SPECIFICATION (ASTM) C645; COATING SPECIFICATION (ASTM) A1003/A653/A924. ALL
CEMCO PRODUCTS ARE MANUFACTURED IN THE USA AT ONE OF OUR FOUR STATE-OF-THE-ART PRODUCTION FACILITIES
STRATEGICALLY LOCATED IN FOUR MAJOR METROPOLITAN MARKETS TO ENSURE THAT SERVICE AND QUALITY
REQUIREMENTS ARE MET. ALSO INCLUDES THE FOLLOWING CSI MASTERFORMAT: 09 21 16.23 FINISHES: GYPSUM BOARD
SHAFT WALL ASSEMBLIES.
Section 1: Summary
CONTENT
INVENTORY
Threshold per
material
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals and
impurities
considered in
1 of 1 materials
see Section 2:
Material Notes
see Section 5:
General Notes
Based on the selected Content Inventory Threshold:
Characterized....................................................
Are the Percent Weight and Role provided for all substances? Yes No
Screened.........................................................
Are all substances screened using Priority Hazard Lists with results
disclosed?
Yes No
Identified......................................................
Are all substances disclosed by Name (Specific or Generic) and
Identifier?
Yes No
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening
individual chemical substances against HPD Priority Hazard
Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will
expose individuals to its chemical substances or any health risk.
Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G40) [ STEEL UNK
ZINC LT-P1 | AQU | RES | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with
the HPD Standard version 2.0, and discloses hazards associated with all
substances present at or above 1000 parts per million (ppm) in the
finished product. Therefore, this HPD qualifies for the LEED v4 MR credit
Building Product Disclosure and Optimization: Material Ingredient
Reporting (Option 1).
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCEOther: ICC-ES Evaluation Report
Multi-attribute: Environmental Product Declaration
See Section 3 for additional listings.
Self-Published* VERIFIER: SCREENING DATE: December 1, 2016 EXPIRY DATE*: December 1, 2019
Third Party Verified VERIFICATION #: RELEASE DATE: December 1, 2016 * or within 3 months of significant change in product contents
*See HPDC website for details
ViperStud & ViperTrack Health Product Declaration Page 1 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 21
Section 2: Content in Descending Order of Quantity
This section lists materials in a product and the substances in each material based on the Inventory Threshold for each material. If residuals or
impurities from the manufacturing or extraction processes are considered for a material, these are inventoried and characterized to the extent
described in the Material and/or General Notes. Chemical substances are screened against the HPD Priority Hazard Lists for human and
environmental health impacts. Screening is based on best available information; "Not Found" does not necessarily mean there is no potential
hazard associated with the product or its contents. More information about Priority Hazard Lists and the GreenScreen can be found online:
www.hpd-collaborative.org and www.greenscreenchemicals.org.
ViperStud & ViperTrack Health Product Declaration Page 2 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236222
HOT-DIPPED GALVANIZED STEEL (G40) %: 100.0000 HPD URL:
Inventory Threshold: 1000 ppm Residuals Considered: Yes
Material Notes: Steel is considered a Generic Commodity Material by the Health Product Declaration Collaborative. Specific guidelines are being
created to address known issues related to transparency and disclosure for several materials (“Special Conditions”), including Metal Alloys such
as steel. This HPD will be updated as appropriate when the guidelines for Steel are released. No residuals or impurities are known or expected
to be present in this material above the inventory threshold indicated. Passivation coatings for corrosion resistance are an industry standard for
this type of material; however, the substances used for such coatings fall below the inventory threshold (0.1% or 1000 ppm) of the material, and
are therefore not reported here.
STEEL ID: 12597-69-2
%: 96.3000 - 98.3000 GS: UNK RC: Both NANO: NO ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced
from several domestic (USA) suppliers.
ZINC ID: 7440-66-6
%: 1.7000 - 3.7000 GS: LT-P1 RC: None NANO: NO ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
RESPIRATORY AOEC - Asthmagens Asthmagen (ARs) - sensitizer-induced - inhalable
forms only
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting
effects
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to
air
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H260 - In contact with water releases flammable
gases which may ignite spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing
(e.g. welding, sawing, etc) during installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for
Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-specifications.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
OTHER ICC-ES Evaluation Report
ViperStud & ViperTrack Health Product Declaration Page 3 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 23
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA 91746 Pittsburg, CA 94565 Denver, CO
80204 Fort Worth, TX 76140
CERTIFICATE URL: www.icc-es.org/reports/pdf_files/ESR-2620.pdf
CERTIFICATION AND COMPLIANCE NOTES: ESR-2620. Evaluation Subject:
ViperStud Drywall Framing System (Nonload-Bearing): Viper25, Viper 20, Viper 18mil,
Viper 27mil, Viper 30mil, Viper 33mil. Evaluation Scope includes compliance with the
following codes: 2012, 2015 International Building Code® (IBC); 2015 International
Residential Code® (IRC); 2010 Florida Building Code—Building; 2010 Florida Building
Code—Residential.
ISSUE
DATE:
2015-07-
01
EXPIRY
DATE:
2017-07-01
CERTIFIER OR
LAB: ICC
Evaluation Service
MULTI-ATTRIBUTEEnvironmental Product
Declaration
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental
Product Declaration covers the following CEMCO Cold-Formed Steel Framing Systems, including:
Structural Stud and Track (ICC-ES ESR 3016); ViperStud®P P Interior Framing (ICC-ES ESR 2620 &
ATI-ES 0154); ProX Header®P P (IAPMO ER-0286); SureBoard®P P for Shear panels (IAPMO ER-
0126); Sure-Span®P P Floor Joist Framing System (ESR PENDING); CST, SLP-TRK®P P, and FAS
Track®P P 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-Stud
Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering
Accessories (ICC-ES ESR 1623); Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips,
and Channels (ICC-ES ESR 3016).
ISSUE
DATE:
2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER
OR LAB:
UL
Environment
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
GYPSUM WALLBOARD HPD URL: See Other Notes (Below)
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: For installation of drywall framing system. According to ICC-
ES ESR-2620: "Gypsum wallboard must be a minimum of 5/8 inch (15.9 mm) thick and Type X, complying with ASTM C1396 and manufactured
by one of the following companies: American Gypsum; CertainTeed; Georgia Pacific; Lafarge; National Gypsum; Temple-Inland; or USG."
FASTENERS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: Fasteners for attaching the gypsum wallboard to the studs
and tracks. According to ICC-ES ESR 2620: "must be No. 6, Type S, fine thread drywall bugle head screws conforming to ASTM C1002."
Section 5: General Notes
ViperStud & ViperTrack Health Product Declaration Page 4 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236224
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry, CA 91746
USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement) BM-2
Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient
information from List Translator lists to benchmark)
UNK Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other
Nano Composed of nanoscale particles or nanotechnology
Declaration Level
Self-declared Manufacturerʼs self-declaration (First Party)Independent Lab Manufacturerʼs self-declaration using results from an independent labSecond Party Verification by trade association or other interested party
Third Party Verification by independent certifier
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and
environmental health hazards. Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator, and when
available, full GreenScreen assessments. The HPD Open Standard does not provide an assessment of health impacts throughout the product life
cycle. It does not provide an assessment of exposure or risk associated with product handling or use. It also does not address potential health
impacts of: (i) substances used or created during the manufacturing process unless they remain in the nal product, or (ii) substances created after
the product is delivered for end use (e.g., if the product burns, degrades, or otherwise changes chemical composition).
The HPD Open Standard was created and is maintained and evolved by the Health Product Declaration Collaborative (the HPD Collaborative), a
customer-led organization composed of stakeholders throughout the building industry. The HPD Collaborative is committed to the continuous
improvement of building products through transparency, openness, and innovation throughout the product supply chain.
A disclosure completed in compliance with the HPD Open Standard is referred to as a “Health Product Declaration,” or “HPD.” The product
manufacturer and any applicable independent veri er are solely responsible for the accuracy of statements and claims made in this HPD and for
compliance with the HPD Open Standard noted.
ViperStud & ViperTrack Health Product Declaration Page 5 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 25
ProX Header ®
by CEMCO
Health
Product
Declaration
v2.0
CLASSIFICATION: 05 40 00 METALS (BEAMS): COLD-FORMED METAL FRAMINGcreated via: HPDC
Online Builder
PRODUCT DESCRIPTION: PROX HEADER® IS A SUPERIOR HEADER SYSTEM THAT PROVIDES A WINNING COMBINATION OF
SIMPLE CODE COMPLIANCE, EASY MEMBER SELECTION, AND FAST INSTALLATION. PROX HEADER IS A LIGHT GAUGE STEEL
HEADER THAT PROVIDES HORIZONTAL AND VERTICAL LOAD SUPPORT. THIS PRE-ENGINEERED METAL FRAMING
COMPONENT IS DESIGNED AS A 1- OR 2-PIECE STEEL HEADER THAT CAN BE USED IN LIEU OF 4- OR 5-PIECE BUILT-UP (STUD
AND TRACK) HEADERS IN BOTH INTERIOR AND EXTERIOR APPLICATIONS, INCLUDING DOOR AND WINDOW OPENINGS. IT
ALSO WORKS AT ANY FRAMED OPENING IN THE WALL, SUCH AS HVAC OPENINGS AND OTHER WALL PENETRATIONS. PROX
HEADER CLIPS ARE INTERNAL AND CONNECT HORIZONTAL TO VERTICAL MEMBERS, WHICH LEAVES A SMOOTH FRAMING
SUBSTRATE FOR THE DRYWALL AND FINISHING TRADES. THE PROX HEADER IS MADE OF 33 TO 68 MIL GALVANIZED STEEL
WITH A STANDARD G60 COATING, AND COMPLIES WITH INDUSTRY STANDARD ASTM PERFORMANCE CRITERIA FOR METAL
STUD FRAMING: ASTM C645, A653/A653M, C754 (INSTALLATION & STORAGE), A924/A924M, A1003/A1003M/E119; IAPMO ER-
0286; IBC 2012/2015 AND CBC 2013 CODE COMPLIANT. PROX HEADER® IS A REGISTERED TRADEMARK OF BRADY
INNOVATIONS, LLC. THIS HPD COVERS PROX HEADER (OUTER), PROX HEADER (INSERT), AND PROX HEADER CLIPS.
Section 1: Summary
CONTENT
INVENTORY
Threshold per
material
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals and
impurities
considered in
1 of 1 materials
see Section 2:
Material Notes
see Section 5:
General Notes
Based on the selected Content Inventory Threshold:
Characterized....................................................
Are the Percent Weight and Role provided for all substances? Yes No
Screened.........................................................
Are all substances screened using Priority Hazard Lists with results
disclosed?
Yes No
Identified......................................................
Are all substances disclosed by Name (Specific or Generic) and
Identifier?
Yes No
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening
individual chemical substances against HPD Priority Hazard
Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will
expose individuals to its chemical substances or any health
risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G60) [ STEEL UNK
ZINC LT-P1 | AQU | RES | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with
the HPD Standard version 2.0, and discloses hazards associated with all
substances present at or above 1000 parts per million (ppm) in the finished
product, as well as the role and percent by weight. Therefore, this HPD
qualifies for the LEED v4 MR credit Building Product Disclosure and
Optimization: Material Ingredient Reporting (Option 1).
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCEOther: UES Evaluation Report
Multi-attribute: Environmental Product Declaration
See Section 3 for additional listings.
Self-Published* VERIFIER: SCREENING DATE: December 1, 2016 EXPIRY DATE*: December 1, 2019
Third Party Verified VERIFICATION #: RELEASE DATE: December 1, 2016 * or within 3 months of significant change in product contents
*See HPDC website for details
ProX Header Health Product Declaration Page 1 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236226
Section 2: Content in Descending Order of Quantity
This section lists materials in a product and the substances in each material based on the Inventory Threshold for each material. If residuals or
impurities from the manufacturing or extraction processes are considered for a material, these are inventoried and characterized to the extent
described in the Material and/or General Notes. Chemical substances are screened against the HPD Priority Hazard Lists for human and
environmental health impacts. Screening is based on best available information; "Not Found" does not necessarily mean there is no potential
hazard associated with the product or its contents. More information about Priority Hazard Lists and the GreenScreen can be found online:
www.hpd-collaborative.org and www.greenscreenchemicals.org.
ProX Header Health Product Declaration Page 2 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 27
HOT-DIPPED GALVANIZED STEEL (G60) %: 100.0000 HPD URL:
Inventory Threshold: 1000 ppm Residuals Considered: Yes
Material Notes: Steel is considered a Generic Commodity Material by the Health Product Declaration Collaborative. Specific guidelines are being
created to address known issues related to transparency and disclosure for several materials (“Special Conditions”), including Metal Alloys such
as steel. This HPD will be updated as appropriate when the guidelines for Steel are released. No residuals or impurities are known or expected
to be present in this material above the inventory threshold indicated. Steel is considered essentially inert for the purposes of Pharos toxics
scoring (Pharos CML), with no known hazardous impurities (Quartz Database). Passivation coatings for corrosion resistance are an industry
standard for this type of material; however, the substances used for such coatings fall below the inventory threshold declared for the material,
and are therefore not reported here.
STEEL ID: 12597-69-2
%: 97.4000 - 98.7000 GS: UNK RC: Both NANO: NO ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced
from several domestic (USA) suppliers.
ZINC ID: 7440-66-6
%: 1.3000 - 2.6000 GS: LT-P1 RC: None NANO: NO ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
RESPIRATORY AOEC - Asthmagens Asthmagen (ARs) - sensitizer-induced - inhalable
forms only
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting
effects
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to
air
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H260 - In contact with water releases flammable
gases which may ignite spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing
(e.g. welding, sawing, etc) during installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for
Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-specifications.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
OTHER UES Evaluation Report
ProX Header Health Product Declaration Page 3 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236228
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA 91746; Pittsburg, CA 94565; Denver,
CO 80204; Fort Worth, TX 76140
CERTIFICATE URL: www.iapmoes.org/Documents/ER_0286.pdf
CERTIFICATION AND COMPLIANCE NOTES: IAPMO ER-286. Scope of Evaluation
includes compliance to the following codes & regulations: 2012 International Building
Code® (IBC); 2013 California Building Code® (CBC). Evaluated in accordance with: ICC-
ES AC261; ICC-ES AC46. Properties assessed: Structural.
ISSUE
DATE:
2013-05-
20
EXPIRY
DATE:
2017-05-31
CERTIFIER OR
LAB: Uniform
Evaluation Service
MULTI-ATTRIBUTEEnvironmental Product
Declaration
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental
Product Declaration covers the following CEMCO Cold-Formed Steel Framing Systems, including:
Structural Stud and Track (ICC-ES ESR 3016); ViperStud®P P Interior Framing (ICC-ES ESR 2620 &
ATI-ES 0154); ProX Header®P P (IAPMO ER-0286); SureBoard®P P for Shear panels (IAPMO ER-
0126); Sure-Span®P P Floor Joist Framing System (ESR PENDING); CST, SLP-TRK®P P, and FAS
Track®P P 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-Stud
Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering
Accessories (ICC-ES ESR 1623); Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips,
and Channels (ICC-ES ESR 3016).
ISSUE
DATE:
2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER
OR LAB:
UL
Environment
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
STEEL STUD SUPPORTS (JAMB STUDS) HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: According to IAPMO ER-286: "Located on both ends of the
header, on each side of the wall opening the ProX Header shall be supported by steel jamb studs. The steel jamb stud thickness and grade of
steel shall equal or exceed the ProX Header member properties, with the exception of jamb studs supporting 68-mil-thick (1.73 mm) ProX
Headers, which may be minimum 54 mils (1.37 mm) thick. The vertical jamb stud may be installed as a single (wide flange) jamb stud, double
jamb stud or triple jamb stud system. The load capacity and jamb stud system used shall be designed, and installation shall be in accordance
with the IBC."
FASTENERS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: According to IAPMO ER-286: "Fasteners used in this system
shall be self- drilling sheet metal screws complying with ASTM C1513 or listed in an evaluation report issued by an approved and accredited
evaluation service agency. The No. 8 screws shall have minimum shear and tensile allowable loads of 344 pounds (1.53 kN) and 118 pounds
(0.52 kN), respectively. The No. 10 screws shall have minimum shear and tensile allowable loads of 370 pounds (1.64 kN) and 137 pounds (0.61
kN), respectively."
Section 5: General Notes
ProX Header Health Product Declaration Page 4 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 29
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry, CA 91746
USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement) BM-2
Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient
information from List Translator lists to benchmark)
UNK Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other
Nano Composed of nanoscale particles or nanotechnology
Declaration Level
Self-declared Manufacturerʼs self-declaration (First Party)Independent Lab Manufacturerʼs self-declaration using results from an independent labSecond Party Verification by trade association or other interested party
Third Party Verification by independent certifier
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and
environmental health hazards. Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator, and when
available, full GreenScreen assessments. The HPD Open Standard does not provide an assessment of health impacts throughout the product life
cycle. It does not provide an assessment of exposure or risk associated with product handling or use. It also does not address potential health
impacts of: (i) substances used or created during the manufacturing process unless they remain in the nal product, or (ii) substances created after
the product is delivered for end use (e.g., if the product burns, degrades, or otherwise changes chemical composition).
The HPD Open Standard was created and is maintained and evolved by the Health Product Declaration Collaborative (the HPD Collaborative), a
customer-led organization composed of stakeholders throughout the building industry. The HPD Collaborative is committed to the continuous
improvement of building products through transparency, openness, and innovation throughout the product supply chain.
A disclosure completed in compliance with the HPD Open Standard is referred to as a “Health Product Declaration,” or “HPD.” The product
manufacturer and any applicable independent veri er are solely responsible for the accuracy of statements and claims made in this HPD and for
compliance with the HPD Open Standard noted.
ProX Header Health Product Declaration Page 5 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236230
Sure-Span Floor Joists
by CEMCO ®
Health
Product
Declaration
v2.0
CLASSIFICATION: 05 40 00 METALS (BEAMS): COLD-FORMED METAL FRAMINGcreated via: HPDC Online
Builder
PRODUCT DESCRIPTION: CEMCOʼS SURE-SPAN® STEEL FLOOR JOIST SYSTEM IS A PATENTED, TESTED, AND APPROVED SOLUTION FOR COMMERCIAL, MID-RISE, AND RESIDENTIAL FLOOR FRAMING ASSEMBLIES. SURE-SPAN FLOOR JOISTS ARE
MANUFACTURED WITH EXTRA LARGE OPENINGS (PUNCH-OUTS) TO ALLOW FOR MECHANICAL, ELECTRICAL, AND
PLUMBING ACCESS WITHOUT DAMAGING THE STRUCTURAL INTEGRITY OF THE FLOOR FRAMING SYSTEM. SURE-SPAN
PROVIDES LONG AND STURDY FLOOR SPANS, ALONG WITH FIRE-RESISTANT AND SOUND-REDUCING SOLUTIONS FOR
ARCHITECTS, ENGINEERS, AND DEVELOPERS. THIS HPD COVERS "SSCJ" PUNCHED C-JOISTS AND “SSRT” RIM TRACK WITH
PRE-SPACED CLIPS. "SSCJ" SURE-SPAN FLOOR JOISTS ARE MANUFACTURED WITH EITHER A 1-3/4" OR 2" FLANGE, IN
THICKNESSES RANGING FROM 43 MIL TO 97 MIL. THE CORRESPONDING "SSRT" SURE-SPAN RIM TRACKS ARE
MANUFACTURED WITH EITHER A 2” LEG/FLANGE, IN THICKNESSES RANGING FROM 43 MIL TO 97 MIL, AND ARE PRODUCED
WITH PRE-SPACED CLIPS AT 12, 16, 19.2 OR 24 INCH ON-CENTER CONFIGURATIONS FOR EASE OF INSTALLATION. ALL
CEMCO SURE-SPAN PRODUCTS ARE MANUFACTURED FROM HOT-DIPPED GALVANIZED STEEL IN G60 COATING (G90
AVAILABLE UPON SPECIAL REQUEST), AND MEET OR EXCEED RELEVANT ASTM, AISI, AND UL STANDARDS.
Section 1: Summary
CONTENT
INVENTORY
Threshold per
material
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals and
impurities
considered in
1 of 1 materials
see Section 2:
Material Notes
see Section 5:
General Notes
Based on the selected Content Inventory Threshold:
Characterized....................................................
Are the Percent Weight and Role provided for all substances? Yes No
Screened.........................................................
Are all substances screened using Priority Hazard Lists with results
disclosed?
Yes No
Identified......................................................
Are all substances disclosed by Name (Specific or Generic) and
Identifier?
Yes No
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening
individual chemical substances against HPD Priority Hazard
Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will
expose individuals to its chemical substances or any health
risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G60) [ STEEL UNK
ZINC LT-P1 | AQU | RES | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with
the HPD Standard version 2.0, and discloses hazards associated with all
substances present at or above 1000 parts per million (ppm) in the finished
product, as well as the role and percent by weight. Therefore, this HPD
qualifies for the LEED v4 MR credit Building Product Disclosure and
Optimization: Material Ingredient Reporting (Option 1).
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCEMulti-attribute: Environmental Product Declaration
See Section 3 for additional listings.
Self-Published* VERIFIER: SCREENING DATE: December 1, 2016 EXPIRY DATE*: December 1, 2019
Third Party Verified VERIFICATION #: RELEASE DATE: December 1, 2016 * or within 3 months of significant change in product contents
*See HPDC website for details
Sure-Span Floor Joists Health Product Declaration Page 1 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 31
Section 2: Content in Descending Order of Quantity
This section lists materials in a product and the substances in each material based on the Inventory Threshold for each material. If residuals or
impurities from the manufacturing or extraction processes are considered for a material, these are inventoried and characterized to the extent
described in the Material and/or General Notes. Chemical substances are screened against the HPD Priority Hazard Lists for human and
environmental health impacts. Screening is based on best available information; "Not Found" does not necessarily mean there is no potential
hazard associated with the product or its contents. More information about Priority Hazard Lists and the GreenScreen can be found online:
www.hpd-collaborative.org and www.greenscreenchemicals.org.
Sure-Span Floor Joists Health Product Declaration Page 2 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236232
HOT-DIPPED GALVANIZED STEEL (G60) %: 100.0000 HPD URL:
Inventory Threshold: 1000 ppm Residuals Considered: Yes
Material Notes: Steel is considered a Generic Commodity Material by the Health Product Declaration Collaborative. Specific guidelines are being
created to address known issues related to transparency and disclosure for several materials (“Special Conditions”), including Metal Alloys such
as steel. This HPD will be updated as appropriate when the guidelines for Steel are released. No residuals or impurities are known or expected
to be present in this material above the inventory threshold indicated. Passivation coatings for corrosion resistance are an industry standard for
this type of material; however, the substances used for such coatings fall below the inventory threshold (0.1% or 1000 ppm) of the material, and
are therefore not reported here.
STEEL ID: 12597-69-2
%: 97.4000 - 99.1000 GS: UNK RC: Both NANO: NO ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced
from several domestic (USA) suppliers.
ZINC ID: 7440-66-6
%: 0.9000 - 2.6000 GS: LT-P1 RC: None NANO: NO ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
RESPIRATORY AOEC - Asthmagens Asthmagen (ARs) - sensitizer-induced - inhalable
forms only
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting
effects
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to
air
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H260 - In contact with water releases flammable
gases which may ignite spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing
(e.g. welding, sawing, etc) during installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for
Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-specifications.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTEEnvironmental Product
Declaration
Sure-Span Floor Joists Health Product Declaration Page 3 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 33
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental
Product Declaration covers the following CEMCO Cold-Formed Steel Framing Systems, including:
Structural Stud and Track (ICC-ES ESR 3016); ViperStud®P P Interior Framing (ICC-ES ESR 2620 &
ATI-ES 0154); ProX Header®P P (IAPMO ER-0286); SureBoard®P P for Shear panels (IAPMO ER-
0126); Sure-Span®P P Floor Joist Framing System (ESR PENDING); CST, SLP-TRK®P P, and FAS
Track®P P 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-Stud
Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering
Accessories (ICC-ES ESR 1623); Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips,
and Channels (ICC-ES ESR 3016).
ISSUE
DATE:
2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER
OR LAB:
UL
Environment
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
“SB” SURE-BRIDGING HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: Used during installation of Sure-Span Floor Joist System to
improve structural strength. “SB” Sure-Bridging is fabricated in 43 mil thickness with 1-5/16” flanges and 2-1/2” webs. Each is made in specific
lengths to properly fit between the joists based upon the on-center spacing with 1-3/4” tabs to ensure proper fastening. Sure-Bridging can be
used with joists having either 1-3/4” or 2” flanges only. CEMCO Sure-Bridging members are produced from hot-dipped galvanized steel in
standard G60 coating. G90 is available upon special request.
Section 5: General Notes
Sure-Span Floor Joists Health Product Declaration Page 4 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236234
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry, CA 91746
USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement) BM-2
Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient
information from List Translator lists to benchmark)
UNK Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other
Nano Composed of nanoscale particles or nanotechnology
Declaration Level
Self-declared Manufacturerʼs self-declaration (First Party)Independent Lab Manufacturerʼs self-declaration using results from an independent labSecond Party Verification by trade association or other interested party
Third Party Verification by independent certifier
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and
environmental health hazards. Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator, and when
available, full GreenScreen assessments. The HPD Open Standard does not provide an assessment of health impacts throughout the product life
cycle. It does not provide an assessment of exposure or risk associated with product handling or use. It also does not address potential health
impacts of: (i) substances used or created during the manufacturing process unless they remain in the nal product, or (ii) substances created after
the product is delivered for end use (e.g., if the product burns, degrades, or otherwise changes chemical composition).
The HPD Open Standard was created and is maintained and evolved by the Health Product Declaration Collaborative (the HPD Collaborative), a
customer-led organization composed of stakeholders throughout the building industry. The HPD Collaborative is committed to the continuous
improvement of building products through transparency, openness, and innovation throughout the product supply chain.
A disclosure completed in compliance with the HPD Open Standard is referred to as a “Health Product Declaration,” or “HPD.” The product
manufacturer and any applicable independent veri er are solely responsible for the accuracy of statements and claims made in this HPD and for
compliance with the HPD Open Standard noted.
Sure-Span Floor Joists Health Product Declaration Page 5 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 35
Head of Wall - Slotted Tracks
by CEMCO ®
Health
Product
Declaration
v2.0
CLASSIFICATION: 05 40 00 METALS: COLD-FORMED METAL FRAMINGcreated via: HPDC
Online Builder
PRODUCT DESCRIPTION: THIS HPD COVERS THE FOLLOWING CEMCO HEAD OF WALL PRODUCTS: “CST” AND “SLP-TRK®”
SLOTTED SLIP TRACKS; EXTERIOR SLOTTED TRACK (EST); TAB TRACK. CEMCOʼS "CST" BRAND SLOTTED TRACK AND SLIPTRACK SYSTEMʼS “SLP-TRK®” BRAND SLOTTED TRACK ARE EVALUATED AND APPROVED FOR USE BY ICC IN REPORT ESR-2012, AND ARE AVAILABLE WITH OPTIONAL DRIFT SLOTS. “CST” AND “SLP-TRK®” ARE PRODUCED FROM G40 (18 AND 33
MIL) AND G60 (43, 54, 68 MIL) COATED STEEL. CEMCO EXTERIOR SLOTTED TRACK (EST) IS A VERTICAL DEFLECTION TRACK
MEMBER. THE EXTERNAL GROOVE PROVIDES A RESTING POINT FOR SHEATHING, TRANSFERRING THE WEIGHT OF THE
SHEATHING TO THE FRAMING MEMBER, AND THE 2” WEB SLOTS PROVIDE DRIFT MOVEMENT CAPABILITIES. CEMCO EST IS
FABRICATED FROM HOT-DIPPED GALVANIZED STEEL COMPLYING WITH ASTM A653, AND ASTM A1003 STRUCTURAL GRADE
50 TYPE H FOR GRADE 33 TYPE H FOR WITH A MINIMUM G60 COATING, AND COMPLIES WITH ASTM C645. CEMCO TAB TRACK
PROVIDES A NON MECHANICAL (SCREWLESS) STUD-TO-TRACK ATTACHMENT FOR METAL STUD WALL FRAMING. A SERIES
OF 1" LONG TABS ARE EVENLY SPACED ACROSS THE TRACKʼS LEGS PROVIDING FLEXIBILITY TO REGULAR AND IRREGULAR LAYOUT. ONCE THE STUDS ARE NESTED WITHIN THE TAB TRACK, THE TABS MAY BE PUSHED INWARD ON EITHER SIDE OF
THE STUD TO PROHIBIT LATERAL MOVEMENT WHILE MAINTAINING VERTICAL DEFLECTION. AVAILABLE IN 33 MIL
THICKNESSES, TAB TRACK IS MANUFACTURED FROM G40 HOT-DIPPED GALVANIZED STEEL.
Section 1: Summary
CONTENT
INVENTORY
Threshold per
material
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals and
impurities
considered in
1 of 1 materials
see Section 2:
Material Notes
see Section 5:
General Notes
Based on the selected Content Inventory Threshold:
Characterized....................................................
Are the Percent Weight and Role provided for all substances? Yes No
Screened.........................................................
Are all substances screened using Priority Hazard Lists with results
disclosed?
Yes No
Identified......................................................
Are all substances disclosed by Name (Specific or Generic) and
Identifier?
Yes No
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening
individual chemical substances against HPD Priority Hazard
Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will
expose individuals to its chemical substances or any health risk.
Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G40 & G60) [ STEEL
UNK ZINC LT-P1 | AQU | RES | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with
the HPD Standard version 2.0, and discloses hazards associated with all
substances present at or above 1000 parts per million (ppm) in the
finished product. Therefore, this HPD qualifies for the LEED v4 MR credit
Building Product Disclosure and Optimization: Material Ingredient
Reporting (Option 1).
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCEMulti-attribute: Environmental Product Declaration
Other: ICC-ES Evaluation Report
See Section 3 for additional listings.
Self-Published* VERIFIER: SCREENING DATE: December 1, 2016 EXPIRY DATE*: December 1, 2019
Third Party Verified VERIFICATION #: RELEASE DATE: December 1, 2016 * or within 3 months of significant change in product contents
*See HPDC website for details
Head of Wall - Slotted Tracks Health Product Declaration Page 1 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236236
Section 2: Content in Descending Order of Quantity
This section lists materials in a product and the substances in each material based on the Inventory Threshold for each material. If residuals or
impurities from the manufacturing or extraction processes are considered for a material, these are inventoried and characterized to the extent
described in the Material and/or General Notes. Chemical substances are screened against the HPD Priority Hazard Lists for human and
environmental health impacts. Screening is based on best available information; "Not Found" does not necessarily mean there is no potential
hazard associated with the product or its contents. More information about Priority Hazard Lists and the GreenScreen can be found online:
www.hpd-collaborative.org and www.greenscreenchemicals.org.
Head of Wall - Slotted Tracks Health Product Declaration Page 2 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 37
HOT-DIPPED GALVANIZED STEEL (G40 & G60) %: 100.0000 HPD URL:
Inventory Threshold: 1000 ppm Residuals Considered: Yes
Material Notes: Steel is considered a Generic Commodity Material by the Health Product Declaration Collaborative. Specific guidelines are being
created to address known issues related to transparency and disclosure for several materials (“Special Conditions”), including declaration of
Recycled Content. This HPD will be updated as appropriate when the guidelines for Steel are released. No residuals or impurities are known or
expected to be present in this material above the inventory threshold indicated. Passivation coatings for corrosion resistance are an industry
standard for this type of material; however, the substances used for such coatings fall below the inventory threshold (0.1% or 1000 ppm) of the
material, and are therefore not reported here.
STEEL ID: 12597-69-2
%: 97.4000 - 99.1000 GS: UNK RC: Both NANO: NO ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced
from several domestic (USA) suppliers.
ZINC ID: 7440-66-6
%: 0.8500 - 2.6000 GS: LT-P1 RC: None NANO: NO ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
RESPIRATORY AOEC - Asthmagens Asthmagen (ARs) - sensitizer-induced - inhalable
forms only
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting
effects
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to
air
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H260 - In contact with water releases flammable
gases which may ignite spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing
(e.g. welding, sawing, etc) during installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for
Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-specifications.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTEEnvironmental Product
Declaration
Head of Wall - Slotted Tracks Health Product Declaration Page 3 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236238
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental
Product Declaration covers the following CEMCO Cold-Formed Steel Framing Systems, including:
Structural Stud and Track (ICC-ES ESR 3016); ViperStud®P P Interior Framing (ICC-ES ESR 2620 &
ATI-ES 0154); ProX Header®P P (IAPMO ER-0286); SureBoard®P P for Shear panels (IAPMO ER-
0126); Sure-Span®P P Floor Joist Framing System (ESR PENDING); CST, SLP-TRK®P P, and FAS
Track®P P 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-Stud
Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering
Accessories (ICC-ES ESR 1623); Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips,
and Channels (ICC-ES ESR 3016).
ISSUE
DATE:
2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER
OR LAB:
UL
Environment
OTHER ICC-ES Evaluation Report
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA 91746 Pittsburg, CA 94565
Denver, CO 80204 Fort Worth, TX 76140
CERTIFICATE URL: www.icc-es.org/reports/pdf_files/ESR-2012.pdf
CERTIFICATION AND COMPLIANCE NOTES: ESR-2012. Evaluation Subject:
CEMCO Steel Tracks Expansion Joint System for Non-Load Bearing Wall
Systems. Evaluation Scope includes compliance with the following code: 2015 and
2012 International Building Code® (IBC).
ISSUE
DATE:
2016-10-01
EXPIRY
DATE: 2018-
10-01
CERTIFIER OR
LAB: ICC Evaluation
Service
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
GYPSUM WALLBOARD HPD URL: See Other Notes (Below)
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: For installation of drywall framing system. According to ICC-
ES ESR-2012: "The 5/8-inch-thick (15.9 mm), Type X gypsum wallboard must comply with ASTM C1396". HPDs for Gypsum Wallboard may be
found at: http://www.hpd-collaborative.org/hpd-public-repository/
FASTENERS HPD URL: No HPD Available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: Used to attach the tops of studs to CST/SLP-TRK®.
According to ICC- ES ESR-2012: Fasteners "must be minimum No. 8 by 9/16-inch-long (14.3 mm), wafer-head, self-piercing tapping or self-
drilling tapping, as applicable, steel screws complying with ASTM C 1513-13."
Section 5: General Notes
Head of Wall - Slotted Tracks Health Product Declaration Page 4 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 39
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry, CA 91746
USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement) BM-2
Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient
information from List Translator lists to benchmark)
UNK Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other
Nano Composed of nanoscale particles or nanotechnology
Declaration Level
Self-declared Manufacturerʼs self-declaration (First Party)Independent Lab Manufacturerʼs self-declaration using results from an independent labSecond Party Verification by trade association or other interested party
Third Party Verification by independent certifier
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and
environmental health hazards. Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator, and when
available, full GreenScreen assessments. The HPD Open Standard does not provide an assessment of health impacts throughout the product life
cycle. It does not provide an assessment of exposure or risk associated with product handling or use. It also does not address potential health
impacts of: (i) substances used or created during the manufacturing process unless they remain in the nal product, or (ii) substances created after
the product is delivered for end use (e.g., if the product burns, degrades, or otherwise changes chemical composition).
The HPD Open Standard was created and is maintained and evolved by the Health Product Declaration Collaborative (the HPD Collaborative), a
customer-led organization composed of stakeholders throughout the building industry. The HPD Collaborative is committed to the continuous
improvement of building products through transparency, openness, and innovation throughout the product supply chain.
A disclosure completed in compliance with the HPD Open Standard is referred to as a “Health Product Declaration,” or “HPD.” The product
manufacturer and any applicable independent veri er are solely responsible for the accuracy of statements and claims made in this HPD and for
compliance with the HPD Open Standard noted.
Head of Wall - Slotted Tracks Health Product Declaration Page 5 of 5 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236240
Sure-Board® Series 200 & Series 200B
by CEMCO
Health
Product
Declaration
v2.0
CLASSIFICATION: 05 10 00 METALS: STRUCTURAL METAL FRAMINGcreated via: HPDC
Online Builder
PRODUCT DESCRIPTION: SURE-BOARD® HAS A GYPSUM BOARD FACING THAT INTEGRATES WITH STANDARD GYPSUM
BOARD FOR A SMOOTH UNINTERRUPTED FINISH. SURE-BOARD® REQUIRES NO LEVELING AND IS READY FOR FINISHES.
SURE-BOARD® LAYS FLAT ON THE STUD SURFACE WITH NO SAGGING, LEAVING NO SURFACE IRREGULARITIES. WHEN SURE-
BOARD® IS USED, THERE IS NO NEED FOR ADDITIONAL STRUCTURAL SHEATHING OR TENSION STRAP BRACES, REQUIRING
COSTLY AND LABORIOUS PRE AND POST TENSIONING. SURE-BOARD® SERIES 200 STRUCTURAL PANELS CONSIST OF 1/2",
5/8" OR 3/4" (12.7, 15.9 OR 19.1 MM) THICK SQUARE OR TAPERED-EDGE TYPE X OR TYPE C FIRE RATED GYPSUM WALLBOARD
OR WATER RESISTANT CORE SHEATHING COMPLYING WITH ASTM C 1369, AS WELL AS GLASSMAT GYPSUM SUBSTRATE
COMPLYING WITH ASTM C 1177, AND FIBER REINFORCED GYPSUM PANELS COMPLYING WITH ASTM C 1278; LAMINATED
WITH WATER SOLUBLE ADHESIVE TO STEEL SHEET. STEEL THICKNESSES AVAILABLE: 33 MIL WITH G40, G60 OR G90
COATING; 43 MIL, 54 MIL, 68 MIL, 97 MIL AND 118 MIL WITH G60 OR G90 COATING. THIS HPD COVERS SURE- BOARD® SERIES
200 AND SURE-BOARD® SERIES 200B PRODUCTS USING PAPER-FACED GYPSUM BOARD ONLY.
Section 1: Summary
CONTENT
INVENTORY
Threshold per
material
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals and
impurities
considered in
3 of 3 materials
see Section 2:
Material Notes
see Section 5:
General Notes
Based on the selected Content Inventory Threshold:
Characterized....................................................
Are the Percent Weight and Role provided for all substances? Yes No
Screened.........................................................
Are all substances screened using Priority Hazard Lists with results
disclosed?
Yes No
Identified......................................................
Are all substances disclosed by Name (Specific or Generic) and
Identifier?
Yes No
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening individual
chemical substances against HPD Priority Hazard Lists and the
GreenScreen for Safer Chemicals®. The HPD does not assess
whether using or handling this product will expose individuals to its
chemical substances or any health risk. Refer to Section 2 for
further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
GYPSUM BOARD [ GYPSUM LT-UNK CELLULOSE,
MICROCRYSTALLINE UNK WATER BM-4 CALCIUM SULFATE
DIHYDRATE LT-UNK QUARTZ LT-1 | CAN VERMICULITE UNK
STARCH LT-UNK NAPHTHALENESULFONIC ACID,
FORMALDEHYDE POLYMER, CALCIUM SALT LT-UNK
STYRENE BUTADIENE RUBBER (SBR) LT-UNK ] HOT-DIPPED
GALVANIZED STEEL [ STEEL UNK ZINC LT-P1 | AQU | MUL |
PHY ] ADHESIVE [ UNDISCLOSED LT-UNK UNDISCLOSED
LT-UNK WATER BM-4 UNDISCLOSED LT-1 | CAN | MUL
UNDISCLOSED LT-UNK ]
Number of Greenscreen BM-4/BM3 contents.......... 2
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance
with the HPD Standard version 2.0, and discloses hazards associated
with all substances present at or above 1000 parts per million (ppm)
for Galvanized Steel, and at or above 100 ppm for the Adhesive, which
together represent ~30-40% of the finished product. As Sure-Board®
Series 200/200B Structural Panels can be manufactured with gypsum
wallboard from various suppliers, the material content information
provided for Gypsum Board is based on that available via the Quartz
Common Product Database for "Drywall (Natural Gypsum)". HPDs
that include information specific to a particular brand/type of Gypsum
Board may be available in the future.
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCEMulti-attribute: Environmental Product Declaration
Other: UES Evaluation Report (ER-0126)
See Section 3 for additional listings.
Self-Published* VERIFIER: SCREENING DATE: February 20, 2017 EXPIRY DATE*: February 20, 2020
Third Party Verified VERIFICATION #: RELEASE DATE: February 20, 2017 * or within 3 months of significant change in product contents
*See HPDC website for details
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 1 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 41
Section 2: Content in Descending Order of Quantity
This section lists materials in a product and the substances in each material based on the Inventory Threshold for each material. If residuals or
impurities from the manufacturing or extraction processes are considered for a material, these are inventoried and characterized to the extent
described in the Material and/or General Notes. Chemical substances are screened against the HPD Priority Hazard Lists for human and
environmental health impacts. Screening is based on best available information; "Not Found" does not necessarily mean there is no potential
hazard associated with the product or its contents. More information about Priority Hazard Lists and the GreenScreen can be found online:
www.hpd-collaborative.org and www.greenscreenchemicals.org.
GYPSUM BOARD %: 61.7000 - 74.1000 HPD URL:
Inventory Threshold: Other Residuals Considered: Yes
Material Notes: Sure-Board® Series 200/200B Structural Panels can be manufactured with gypsum wallboard from various suppliers; thus, the
substances for Gypsum Board are disclosed to 1000 ppm based on information provided by Quartz Common Product Database for "Drywall
(Natural Gypsum)". Residuals/Impurities that are known or expected to be present above this threshold have been disclosed, based on
information provided by Quartz Database. An industry-wide Environmental Product Declaration (Type III EPD) for "Typical (5/8" Type X) North
American Gypsum Boards" is available at: www.gypsum.org/wp-content/uploads/2013/12/Gypsum-2014-FINAL-May-13-.pdf
GYPSUM ID: 13397-24-5
%: 88.1000 GS: LT-UNK RC: None NANO: NO ROLE: Body
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
CELLULOSE, MICROCRYSTALLINE ID: 9004-34-6
%: 4.4000 GS: UNK RC: None NANO: NO ROLE: Paper
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Listed by Quartz Database as "Waste Paper" from cardboard boxes, newspapers, and kraft cuttings.
WATER ID: 7732-18-5
%: 3.2000 GS: BM-4 RC: None NANO: NO ROLE: Binder
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Moisture content of finished product = 3.3% per Athena 2011.
CALCIUM SULFATE DIHYDRATE ID: 10101-41-4
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 2 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236242
%: 1.9000 GS: LT-UNK RC: None NANO: NO ROLE: Filler, Accelerator
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
QUARTZ ID: 14808-60-7
%: Impurity/Residual GS: LT-1 RC: None NANO: NO ROLE: Impurity/Residual
HAZARDS: AGENCY(IES) WITH WARNINGS:
CANCER US CDC - Occupational Carcinogens Occupational Carcinogen
CANCER CA EPA - Prop 65 Carcinogen - specific to chemical form or
exposure route
CANCER IARC Group 1: Agent is carcinogenic to humans -
inhaled from occupational sources
CANCER US NIH - Report on Carcinogens Known to be Human Carcinogen (respirable size -
occupational setting)
CANCER MAK Carcinogen Group 1 - Substances that cause
cancer in man
SUBSTANCE NOTES:
VERMICULITE ID: 1318-00-9
%: 0.5000 GS: UNK RC: None NANO: NO ROLE: Fire Resistance
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Listed as standard ingredient in regular wallboard by Athena 2011.
STARCH ID: 9005-25-8
%: 0.4000 GS: LT-UNK RC: None NANO: NO ROLE: Accelerator,
Binder, Edge Paste
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 3 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 43
NAPHTHALENESULFONIC ACID, FORMALDEHYDE POLYMER, CALCIUM SALT ID: 37293-74-6
%: 0.3000 GS: LT-UNK RC: None NANO: NO ROLE: Dispersant
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: From Quartz Database: Formaldehyde polymer, calcium salt, Formaldehyde-based, percentages are of dispersant
formulation and will need to be adjusted; "The naphthalenesulfonate dispersant is present in an amount of about 0.1%-0.3% by weight
based on the weight of dry stucco." (USG patent)
STYRENE BUTADIENE RUBBER (SBR) ID: 9003-55-8
%: 0.2000 GS: LT-UNK RC: None NANO: NO ROLE: Binder
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Quartz Database lists as "Polymer Latex", and states the following: "SBR is a representative material stand in for
things described as SBR latex, latex, or acrylic. There is variation of the exact polymer used between manufacturers."
HOT-DIPPED GALVANIZED STEEL %: 25.9000 - 38.3000 HPD URL:
Inventory Threshold: 1000 ppm Residuals Considered: Yes
Material Notes: Steel is considered a Generic Commodity Material by the Health Product Declaration Collaborative. Specific guidelines are being
created to address known issues related to transparency and disclosure for several materials (“Special Conditions”), including Metal Alloys such
as steel. This HPD will be updated as appropriate when the guidelines for Steel are released. No residuals or impurities are known or expected
to be present in this material above the inventory threshold indicated. Steel is considered essentially inert for the purposes of Pharos toxics
scoring (Pharos CML), with no known hazardous impurities (Quartz Database). Passivation coatings for corrosion resistance are an industry
standard for this type of material; however, the substances used for such coatings fall below the inventory threshold declared for the material,
and are therefore not reported here.
STEEL ID: 12597-69-2
%: 90.0000 - 99.9000 GS: UNK RC: Both NANO: NO ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Consists of 36.9% Recycled Content, including 14.4% Pre-Consumer and 19.8% Post-Consumer Recycled Steel.
ZINC ID: 7440-66-6
%: 0.1500 - 9.1000 GS: LT-P1 RC: None NANO: NO ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 4 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236244
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting
effects
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
MULTIPLE German FEA - Substances Hazardous to Waters Class 2 - Hazard to Waters
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to
air
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H260 - In contact with water releases flammable
gases which may ignite spontaneously
SUBSTANCE NOTES: These form-specific hazards are not expected to apply once the product is in place. However, exposure to
particulates and/or fumes may be possible during installation (e.g. from grinding, sawing, welding, etc.) See most current Safety Data
Sheet (SDS) for more information.
ADHESIVE %: 1.4000 - 2.1000 HPD URL:
Inventory Threshold: 100 ppm Residuals Considered: Yes
Material Notes: No Residuals/Impurities are known or expected to be present at or above the Inventory Threshold listed, based on Supplier
Disclosure Letter.
UNDISCLOSED
%: 80.0000 - 90.0000 GS: LT-UNK RC: None NANO: NO ROLE: Polymer
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
UNDISCLOSED
%: 10.0000 - 15.0000 GS: LT-UNK RC: None NANO: NO ROLE: Plasticizer
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
WATER ID: 7732-18-5
%: 1.0000 - 5.0000 GS: BM-4 RC: None NANO: NO ROLE: Diluent
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 5 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 45
SUBSTANCE NOTES:
UNDISCLOSED
%: 0.1000 - 0.5000 GS: LT-1 RC: None NANO: NO ROLE: Raw Material
HAZARDS: AGENCY(IES) WITH WARNINGS:
CANCER EU - R-phrases R45 - May cause cancer
CANCER EU - GHS (H-Statements) H350 - May cause cancer
CANCER EU - REACH Annex XVII CMRs Carcinogen Category 2 - Substances which
should be regarded as if they are Carcinogenic to
man
MULTIPLE ChemSec - SIN List CMR - Carcinogen, Mutagen &/or Reproductive
Toxicant
MULTIPLE German FEA - Substances Hazardous to Waters Class 3 - Severe Hazard to Waters
CANCER EU - Annex VI CMRs Carcinogen Category 1B - Presumed Carcinogen
based on animal evidence
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
UNDISCLOSED
%: 0.0100 - 0.0500 GS: LT-UNK RC: None NANO: NO ROLE: Raw Material
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTEEnvironmental Product
Declaration
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 6 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236246
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental
Product Declaration covers the following CEMCO Cold-Formed Steel Framing Systems, including:
Structural Stud and Track (ICC-ES ESR 3016); ViperStud® Interior Framing (ICC-ES ESR 2620 & ATI-
ES 0154); ProX Header® (IAPMO ER-0286); SureBoard® for Shear Panels (IAPMO ER- 0126); Sure-
Span® Floor Joist Framing System (ESR PENDING); CST, SLP-TRK®, and FAS Track® 1000 Brand
Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-Stud Studs and Track (AER
09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering Accessories (ICC-ES ESR 1623);
Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips, and Channels (ICC-ES ESR 3016).
ISSUE
DATE:
2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER
OR LAB:
UL
Environment
OTHER UES Evaluation Report (ER-0126)
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA 91746; Pittsburg, CA 94565; Denver, CO
80204; Fort Worth, TX 76140
CERTIFICATE URL: http://www.iapmoes.org/Documents/ER_0126.pdf
CERTIFICATION AND COMPLIANCE NOTES: IAPMO ER-0126. Scope of Evaluation
includes compliance to the following codes & regulations: 2015, 2012, and 2009
International Building Code® (IBC); 2015, 2012, and 2009 International Residential Code®
(IRC); 2016 and 2013 California Building Code® (CBC). Evaluated in accordance with EC
003-2016. Properties assessed: Structural.
ISSUE
DATE:
2016-10-
03
EXPIRY
DATE:
2017-02-
28
CERTIFIER OR
LAB: Uniform
Evaluation
Service
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
FASTENERS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: Used to attach Sure-Board® Structural Panels to Framing.
See IAPMO ER-0126 report for specific fastener requirements: http://www.iapmoes.org/Documents/ER_0126.pdf
Section 5: General Notes
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 7 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 47
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry, CA 91746
USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement) BM-2
Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient
information from List Translator lists to benchmark)
UNK Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other
Nano Composed of nanoscale particles or nanotechnology
Declaration Level
Self-declared Manufacturerʼs self-declaration (First Party)Independent Lab Manufacturerʼs self-declaration using results from an independent labSecond Party Verification by trade association or other interested party
Third Party Verification by independent certifier
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and
environmental health hazards. Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator, and when
available, full GreenScreen assessments. The HPD Open Standard does not provide an assessment of health impacts throughout the product life
cycle. It does not provide an assessment of exposure or risk associated with product handling or use. It also does not address potential health
impacts of: (i) substances used or created during the manufacturing process unless they remain in the final product, or (ii) substances created
after the product is delivered for end use (e.g., if the product burns, degrades, or otherwise changes chemical composition).
The HPD Open Standard was created and is maintained and evolved by the Health Product Declaration Collaborative (the HPD Collaborative), a
customer-led organization composed of stakeholders throughout the building industry. The HPD Collaborative is committed to the continuous
improvement of building products through transparency, openness, and innovation throughout the product supply chain.
A disclosure completed in compliance with the HPD Open Standard is referred to as a “Health Product Declaration,” or “HPD.” The product
manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for
compliance with the HPD Open Standard noted.
Sure-Board® Series 200 & Series 200B Health Product Declaration Page 8 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236248
Sure-Board® Series 200W
by CEMCO
Health
Product
Declaration
v2.0
CLASSIFICATION: 05 10 00 METALS: STRUCTURAL METAL FRAMINGcreated via: HPDC Online
Builder
PRODUCT DESCRIPTION: SURE-BOARD® SERIES 200W FOR STEEL FRAMING AND SERIES 200W FOR WOOD FRAMING ARE
STEEL SHEET AND MEDIUM DENSITY FIBERBOARD (MDF) COMPOSITE PRODUCTS THAT ARE INSTALLED ON STEEL OR
WOOD FRAMED SHEAR WALLS AT POINTS REQUIRING SHEAR. SURE-BOARD® ELIMINATES USE OF EXCESS MATERIALS
AND LABOR, WHICH LOWERS COST AND INCREASES PERFORMANCE. LATERAL AND ELASTIC DISPLACEMENT AT
ALLOWABLE VALUES ARE SIGNIFICANTLY LESS USING SURE-BOARD® SERIES 200W FOR WOOD FRAME CONSTRUCTION.
ON EXTERIOR WALLS, THE USE OF SURE-BOARD® SERIES 200W GUARANTEES YOUR EXTERIOR PLASTER WILL MAINTAIN A
CONSISTENT THICKNESS WITHOUT ADDITIONAL FURRING. ALL TESTING FOR SURE-BOARD® SERIES 200W WAS
PERFORMED USING ASTM E 2126 SPD REVERSE CYCLIC TEST PROTOCOL. THE STEEL SHEET IS NO. 22 GAUGE/0.027" (0.686
MM) MINIMUM BASE-METAL THICKNESS, COMPLYING WITH ASTM A 653 CS, GRADE 33, AND IS PROVIDED WITH G40
MINIMUM HOT-DIPPED GALVANIZED COATING CONFORMING WITH ASTM A924. THIS HPD COVERS SURE-BOARD® SERIES
200W PRODUCTS USING 1/8" MDF ONLY.
Section 1: Summary
CONTENT
INVENTORY
Threshold per
material
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals and
impurities
considered in
3 of 3 materials
see Section 2:
Material Notes
see Section 5:
General Notes
Based on the selected Content Inventory Threshold:
Characterized....................................................
Are the Percent Weight and Role provided for all substances? Yes No
Screened.........................................................
Are all substances screened using Priority Hazard Lists with results
disclosed?
Yes No
Identified......................................................
Are all substances disclosed by Name (Specific or Generic) and
Identifier?
Yes No
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening
individual chemical substances against HPD Priority
Hazard Lists and the GreenScreen for Safer Chemicals®.
The HPD does not assess whether using or handling this
product will expose individuals to its chemical substances
or any health risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL [ STEEL UNK
ZINC LT-P1 | AQU | MUL | PHY ] MEDIUM DENSITY
FIBERBOARD (MDF) [ WOOD FIBER - UNSPECIFIED
UNK UREA FORMALDEHYDE LT-UNK | RES
PARAFFIN LT-UNK UREA LT-UNK FORMALDEHYDE
LT-1 | MAM | SKI | CAN | RES | GEN | MUL | END ]
ADHESIVE [ UNDISCLOSED LT-UNK UNDISCLOSED
LT-UNK WATER BM-4 UNDISCLOSED LT-1 | CAN |
MUL UNDISCLOSED LT-UNK ]
Number of Greenscreen BM-4/BM3 contents.......... 1
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with the
HPD Standard version 2.0, and discloses hazards associated with all
substances present at or above 1000 parts per million (ppm) for Galvanized
Steel, and at or above 100 ppm for the Adhesive, which together represent ~70-
80% of the finished product. As Sure-Board® Series 200W Structural Panels
can be manufactured with medium density fiberboard (MDF) from various
suppliers, the material content information provided for the 1/8" MDF is based
on that available via the Quartz Common Product Database. HPDs that include
information specific to a particular brand/type of MDF may be available in the
future.
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCEMulti-attribute: Environmental Product Declaration
Other: UES Evaluation Report (ER-0126)
See Section 3 for additional listings.
Self-Published* VERIFIER: SCREENING DATE: February 7, 2017 EXPIRY DATE*: February 7, 2020
Third Party Verified VERIFICATION #: RELEASE DATE: March 2, 2017 * or within 3 months of significant change in product contents
*See HPDC website for details
Sure-Board® Series 200W Health Product Declaration Page 1 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 49
Section 2: Content in Descending Order of Quantity
This section lists materials in a product and the substances in each material based on the Inventory Threshold for each material. If residuals or
impurities from the manufacturing or extraction processes are considered for a material, these are inventoried and characterized to the extent
described in the Material and/or General Notes. Chemical substances are screened against the HPD Priority Hazard Lists for human and
environmental health impacts. Screening is based on best available information; "Not Found" does not necessarily mean there is no potential
hazard associated with the product or its contents. More information about Priority Hazard Lists and the GreenScreen can be found online:
www.hpd-collaborative.org and www.greenscreenchemicals.org.
HOT-DIPPED GALVANIZED STEEL %: 73.6000 HPD URL:
Inventory Threshold: 1000 ppm Residuals Considered: Yes
Material Notes: Steel is considered a Generic Commodity Material by the Health Product Declaration Collaborative. Specific guidelines are being
created to address known issues related to transparency and disclosure for several materials (“Special Conditions”), including Metal Alloys such
as steel. This HPD will be updated as appropriate when the guidelines for Steel are released. No residuals or impurities are known or expected
to be present in this material above the inventory threshold indicated. Steel is considered essentially inert for the purposes of Pharos toxics
scoring (Pharos CML), with no known hazardous impurities (Quartz Database). Passivation coatings for corrosion resistance are an industry
standard for this type of material; however, the substances used for such coatings fall below the inventory threshold declared for the material,
and are therefore not reported here.
STEEL ID: 12597-69-2
%: 90.9000 - 99.9000 GS: UNK RC: Both NANO: NO ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced
from several domestic (USA) suppliers.
ZINC ID: 7440-66-6
%: 0.1500 - 9.1000 GS: LT-P1 RC: None NANO: NO ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting
effects
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
MULTIPLE German FEA - Substances Hazardous to Waters Class 2 - Hazard to Waters
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to
air
PHYSICAL HAZARD
(REACTIVE)
EU - GHS (H-Statements) H260 - In contact with water releases flammable
gases which may ignite spontaneously
SUBSTANCE NOTES: These form-specific hazards are not expected to apply once the product is in place. However, exposure to
particulates and/or fumes may be possible during installation (e.g. from grinding, sawing, welding, etc.) See most current Safety Data
Sheet (SDS) for more information.
Sure-Board® Series 200W Health Product Declaration Page 2 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236250
MEDIUM DENSITY FIBERBOARD (MDF) %: 22.3000 HPD URL:
Inventory Threshold: Other Residuals Considered: Yes
Material Notes: As Sure-Board® Series 200W Structural Panels can be manufactured with medium density fiberboard (MDF) from various
suppliers, substances for MDF are disclosed to 1000 ppm based on information provided by Quartz Common Product Database.
Residuals/Impurities that are known or expected to be present above this threshold have been disclosed, based on information provided by
Quartz Database. An industry-wide Environmental Product Declaration (EPD) for MDF can be found at:
www.awc.org/pdf/greenbuilding/epd/AWC-EPD-MDF-1311.pdf
WOOD FIBER - UNSPECIFIED ID:
%: 89.1000 GS: UNK RC: None NANO: NO ROLE: Substrate
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
UREA FORMALDEHYDE ID: 9011-05-6
%: 10.0000 GS: LT-UNK RC: None NANO: NO ROLE: Binder Resin
HAZARDS: AGENCY(IES) WITH WARNINGS:
RESPIRATORY AOEC - Asthmagens Asthmagen (Rs) - sensitizer-induced
SUBSTANCE NOTES: Quartz Project lists the Respiratory hazard as "occupational only".
PARAFFIN ID: 8002-74-2
%: 0.6000 GS: LT-UNK RC: None NANO: NO ROLE: Water Resistance
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
UREA ID: 57-13-6
%: 0.1600 GS: LT-UNK RC: None NANO: NO ROLE: Binder
Component;
Formaldehyde
Scavenger
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
Sure-Board® Series 200W Health Product Declaration Page 3 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 51
FORMALDEHYDE ID: 50-00-0
%: Impurity/Residual GS: LT-1 RC: None NANO: NO ROLE: Impurity/Residual
HAZARDS: AGENCY(IES) WITH WARNINGS:
MAMMALIAN EU - R-phrases R23 - Toxic by Inhalation (gas, vapour, dust/mist)
MAMMALIAN EU - R-phrases R24 - Toxic in Contact with Skin
MAMMALIAN EU - R-phrases R25 - Toxic if Swallowed
SKIN IRRITATION EU - R-phrases R34 - Causes burns
CANCER EU - R-phrases R40 - Limited Evidence of Carcinogenic Effects
SKIN SENSITIZE EU - R-phrases R43 - May cause sensitization by skin contact
RESPIRATORY AOEC - Asthmagens Asthmagen (G) - generally accepted
CANCER US EPA - IRIS Carcinogens (1986) Group B1 - Probable human Carcinogen
CANCER IARC Group 1 - Agent is Carcinogenic to humans
CANCER CA EPA - Prop 65 Carcinogen
CANCER US CDC - Occupational Carcinogens Occupational Carcinogen
CANCER US NIH - Report on Carcinogens Known to be a human Carcinogen
MAMMALIAN EU - GHS (H-Statements) H301 - Toxic if swallowed
MAMMALIAN EU - GHS (H-Statements) H311 - Toxic in contact with skin
SKIN IRRITATION EU - GHS (H-Statements) H314 - Causes severe skin burns and eye
damage
SKIN SENSITIZE EU - GHS (H-Statements) H317 - May cause an allergic skin reaction
MAMMALIAN EU - GHS (H-Statements) H331 - Toxic if inhaled
GENE MUTATION EU - GHS (H-Statements) H341 - Suspected of causing genetic defects
CANCER EU - GHS (H-Statements) H350 - May cause cancer
MULTIPLE ChemSec - SIN List CMR - Carcinogen, Mutagen &/or Reproductive
Toxicant
ENDOCRINE TEDX - Potential Endocrine Disruptors Potential Endocrine Disruptor
MULTIPLE German FEA - Substances Hazardous to Waters Class 3 - Severe Hazard to Waters
CANCER MAK Carcinogen Group 4 - Non-genotoxic carcinogen
with low risk under MAK/BAT levels
SKIN SENSITIZE MAK Sensitizing Substance Sh - Danger of skin
sensitization
Sure-Board® Series 200W Health Product Declaration Page 4 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236252
CANCER EU - Annex VI CMRs Carcinogen Category 1B - Presumed Carcinogen
based on animal evidence
SUBSTANCE NOTES:
ADHESIVE %: 4.1000 HPD URL:
Inventory Threshold: 100 ppm Residuals Considered: Yes
Material Notes: No Residuals/Impurities are known or expected to be present at or above the Inventory Threshold listed, based on Supplier
Disclosure Letter.
UNDISCLOSED
%: 80.0000 - 90.0000 GS: LT-UNK RC: None NANO: NO ROLE: Polymer
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
UNDISCLOSED
%: 10.0000 - 15.0000 GS: LT-UNK RC: None NANO: NO ROLE: Plasticizer
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
WATER ID: 7732-18-5
%: 1.0000 - 5.0000 GS: BM-4 RC: None NANO: NO ROLE: Diluent
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
UNDISCLOSED
%: 0.1000 - 0.5000 GS: LT-1 RC: None NANO: NO ROLE: Raw Material
HAZARDS: AGENCY(IES) WITH WARNINGS:
Sure-Board® Series 200W Health Product Declaration Page 5 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 53
CANCER EU - R-phrases R45 - May cause cancer
CANCER EU - GHS (H-Statements) H350 - May cause cancer
CANCER EU - REACH Annex XVII CMRs Carcinogen Category 2 - Substances which
should be regarded as if they are Carcinogenic to
man
MULTIPLE ChemSec - SIN List CMR - Carcinogen, Mutagen &/or Reproductive
Toxicant
MULTIPLE German FEA - Substances Hazardous to Waters Class 3 - Severe Hazard to Waters
CANCER EU - Annex VI CMRs Carcinogen Category 1B - Presumed Carcinogen
based on animal evidence
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
UNDISCLOSED
%: 0.0100 - 0.0500 GS: LT-UNK RC: None NANO: NO ROLE: Raw Material
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Supplier has shared substance name and CAS number in confidentiality; substance to remain proprietary to
supplier. Substance has been screened against HPD Priority Lists with results disclosed.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTEEnvironmental Product
Declaration
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental
Product Declaration covers the following CEMCO Cold-Formed Steel Framing Systems, including:
Structural Stud and Track (ICC-ES ESR 3016); ViperStud Interior Framing (ICC-ES ESR 2620 & ATI-ES
0154); ProX Header (IAPMO ER-0286); SureBoard for Shear panels (IAPMO ER-0126); Sure-Span Floor
Joist Framing System (ESR PENDING); CST, SLP-TRK, and FAS Track 1000 Brand Slotted Tracks (ICC-
ES ESR 2012); USG SHAFTWALL Brand CH and H-Stud Studs and Track (AER 09038); Expanded
Metal Lath Products (ICC-ES ESR 1623); Plastering Accessories (ICC-ES ESR 1623); Drywall/Interior
Accessories (ICC-ES ESR 3016); Connectors, Clips, and Channels (ICC-ES ESR 3016).
ISSUE
DATE:
2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER
OR LAB:
UL
Environment
OTHER UES Evaluation Report (ER-0126)
Sure-Board® Series 200W Health Product Declaration Page 6 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236254
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA 91746; Pittsburg, CA 94565; Denver, CO
80204; Fort Worth, TX 76140
CERTIFICATE URL: http://www.iapmoes.org/Documents/ER_0126.pdf
CERTIFICATION AND COMPLIANCE NOTES: IAPMO ER-0126. Scope of Evaluation
includes compliance to the following codes & regulations: 2015, 2012, and 2009
International Building Code® (IBC); 2015, 2012, and 2009 International Residential Code®
(IRC); 2016 and 2013 California Building Code® (CBC). Evaluated in accordance with EC
003-2016. Properties assessed: Structural.
ISSUE
DATE:
2016-10-
03
EXPIRY
DATE:
2017-02-28
CERTIFIER OR
LAB: Uniform
Evaluation
Service
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
FASTENERS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES: Used to attach Sure-Board® Structural Panels to Framing.
See IAPMO ER-0126 report for specific fastener requirements: http://www.iapmoes.org/Documents/ER_0126.pdf
Section 5: General Notes
Sure-Board® Series 200W Health Product Declaration Page 7 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 55
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
City of Industry, CA 91746
USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement) BM-2
Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient
information from List Translator lists to benchmark)
UNK Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other
Nano Composed of nanoscale particles or nanotechnology
Declaration Level
Self-declared Manufacturerʼs self-declaration (First Party)Independent Lab Manufacturerʼs self-declaration using results from an independent labSecond Party Verification by trade association or other interested party
Third Party Verification by independent certifier
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and
environmental health hazards. Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator, and when
available, full GreenScreen assessments. The HPD Open Standard does not provide an assessment of health impacts throughout the product life
cycle. It does not provide an assessment of exposure or risk associated with product handling or use. It also does not address potential health
impacts of: (i) substances used or created during the manufacturing process unless they remain in the final product, or (ii) substances created
after the product is delivered for end use (e.g., if the product burns, degrades, or otherwise changes chemical composition).
The HPD Open Standard was created and is maintained and evolved by the Health Product Declaration Collaborative (the HPD Collaborative), a
customer-led organization composed of stakeholders throughout the building industry. The HPD Collaborative is committed to the continuous
improvement of building products through transparency, openness, and innovation throughout the product supply chain.
A disclosure completed in compliance with the HPD Open Standard is referred to as a “Health Product Declaration,” or “HPD.” The product
manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for
compliance with the HPD Open Standard noted.
Sure-Board® Series 200W Health Product Declaration Page 8 of 8 created via: HPDC Online Builder www.hpd-collaborative.org
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236256
Metal Lath by CEMCO
Health ProductDeclaration v2.1
CLASSIFICATION: 09 22 36.23 Metal Lath created via: HPDC Online Builder
PRODUCT DESCRIPTION: This HPD covers all CEMCO Metal Lath products without paper backing, including Expanded, Self-Furred, CEM-
MESH, Flat-Ribbed, and Hi-Ribbed Metal Lath. All CEMCO Metal Lath products are produced from standard G60 hot-dipped galvanized steel,
and meet or exceed industry standards. CEMCO's Metal Lath products are certified code compliant via ICC-ES ESR-1623.
Section 1: Summary Nested Method / Material Threshold
CONTENT INVENTORY
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening individual chemical substances
against HPD Priority Hazard Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will expose individuals to its
chemical substances or any health risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G60) [ STEEL (STEEL) NoGS ZINC (ZINC) LT-P1 |
AQU | END | MUL | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with the HPD
Standard version 2.1, and discloses hazards associated with all substances present at or
above 1000 parts per million (ppm) in the finished product. Therefore, this HPD is
consistent with the LEED v4 MR credit Building Product Disclosure and Optimization:
Material Ingredient Reporting (Option 1).
Inventory Reporting Format
Nested Materials Method
Basic Method
Threshold Disclosed Per
Material
Product
Threshold level
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals/Impurities
Residuals/Impurities
Considered in 1 of 1
Materials
Explanation(s) provided
for Residuals/Impurities?
Yes No
Yes No
Yes No
Yes No
Are All Substances Above the Threshold Indicated:
Characterized
Percent Weight and Role Provided?
Screened
Using Priority Hazard Lists with Results
Disclosed?
Identified
Name and Identifier Provided?
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCE See Section 3 for additional listings.
Multi-attribute: Environmental Product Declaration (EPD) by UL
Other: ICC-ES Evaluation Report (ESR-1623)
CONSISTENCY WITH OTHER PROGRAMS
Pre-checked for LEED v4 Material Ingredients, Option 1
Third Party Verified?
Yes
No
PREPARER: Self-Prepared
VERIFIER:
VERIFICATION #:
SCREENING DATE: 2017-08-01
PUBLISHED DATE: 2017-08-10
EXPIRY DATE: 2020-08-01
Metal Lath
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 1 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 57
Section 2: Content in Descending Order of Quantity
This section lists contents in a product based on specific threshold(s) and reports detailed health information including hazards. This HPD uses the inventory method indicated above, which is
one of three possible methods:
Basic Inventory method with Product-level threshold.
Nested Material Inventory method with Product-level threshold
Nested Material Inventory method with individual Material-level thresholds
Definitions and requirements for the three inventory methods and requirements for each data field can be found in the HPD Open Standard version 2.1, available on the HPDC website at:
www.hpd-collaborative.org/hpd-2-1-standard
HOT-DIPPED GALVANIZED STEEL (G60) %: 100.0000 - 100.0000 HPD URL:
MATERIAL THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present in this material above the inventory threshold
indicated, based on supplier SDS and as predicted by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Specific guidelines are being created to address known issues related to transparency and disclosure for several materials
(“Special Conditions”), including Metal Alloys such as Steel. This HPD will be updated as appropriate when the guidelines for Steel are released.
Passivation coatings for corrosion resistance are an industry standard for this type of material; however, the substances used for such coatings fall
below the inventory threshold (0.1% or 1000 ppm) of the material, and are therefore not reported here.
STEEL (STEEL) ID: 12597-69-2
%: 97.4000 - 98.7000 GS: NoGS RC: Both NANO: No ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 37% pre- and post-consumer recycled steel sourced from several domestic (USA)
suppliers. This substance is considered essentially inert for the purposes of Pharos toxics scoring (Pharos CML).
ZINC (ZINC) ID: 7440-66-6
%: 1.3000 - 2.6000 GS: LT-P1 RC: None NANO: No ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting effects
ENDOCRINE TEDX - Potential Endocrine Disruptors Potential Endocrine Disruptor
MULTIPLE German FEA - Substances Hazardous to Waters Class 2 - Hazard to Waters
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to air
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H260 - In contact with water releases flammable gases which may ignite
spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing (e.g. welding, sawing, etc) during
installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-
specifications.
Section 3: Certifications and Compliance
Metal Lath
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 2 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236258
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTE Environmental Product
Declaration (EPD) by UL
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
http://www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
ISSUE
DATE:2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER OR
LAB: UL
Environment
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental Product Declaration covers the following
CEMCO Cold-Formed Steel Framing Systems, including: Structural Stud and Track (ICC-ES ESR 3016); ViperStud Interior Framing (ICC-
ES ESR 2620); ProX Header (IAPMO ER-0286); SureBoard for Shear panels (IAPMO ER-0126); Sure-Span Floor Joist Framing System
(ESR PENDING); CST/SLP-TRK, and FAS Track 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-
Stud Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering Accessories (ICC-ES ESR 1623);
Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips, and Channels (ICC-ES ESR 3016).
OTHER ICC-ES Evaluation Report (ESR-1623)
CERTIFYING PARTY: Self-declared
APPLICABLE FACILITIES: All
CERTIFICATE URL: http://www.icc-es.org/reports/pdf_files/ICC-
ES/ESR-1623.pdf
ISSUE DATE:2015-05-01 EXPIRY DATE: 2019-05-01 CERTIFIER OR LAB: ICC Evaluation
Services
CERTIFICATION AND COMPLIANCE NOTES: EVALUATION SUBJECT: CEMCO METAL LATH PRODUCTS. EVALUATION SCOPE: Compliance
with the following codes: 2012, 2009 and 2006 International Building Code®; 2012, 2009 and 2006 International Residential Code®; 2013
Abu Dhabi International Building Code (ADIBC). Property evaluated: Physical properties. Products include: CEMCO 2.5 Expanded
Diamond Mesh Metal Lath; CEMCO 2.5 Self-Furred Expanded Diamond Mesh Metal Lath; CEMCO 3.4 Expanded Diamond Mesh Metal
Lath; CEMCO 3.4 Self-Furred Expanded Diamond Mesh Metal Lath; 1/8-inch Self- Furred Flat Rib Lath; 3/8-inch 3.4 Hi Rib Lath.
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
No accessories are required for this product.
Section 5: General Notes
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
Metal Lath
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 3 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 59
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
with the HPD standard noted.
Metal Lath
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 4 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236260
Metal Lath with D-Paper by CEMCO
Health ProductDeclaration v2.1
CLASSIFICATION: 09 22 36.23 Metal Lath created via: HPDC Online Builder
PRODUCT DESCRIPTION: This HPD covers CEMCO Metal Lath products with D-Paper, including Diamond Products (1.75, 2.5, and 3.4; Flat,
Dimpled, and Grooved), and 1/8" Flat Rib Products (1/8" Riblath). All CEMCO Metal Lath products are produced from standard G60 hot-dipped
galvanized steel, and meet or exceed industry standards. CEMCO's Metal Lath products are certified code compliant via ICC-ES ESR-1623.
Section 1: Summary Nested Method / Product Threshold
CONTENT INVENTORY
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening individual chemical substances
against HPD Priority Hazard Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will expose individuals to its
chemical substances or any health risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G60) [ STEEL (STEEL) NoGS ZINC (ZINC) LT-P1 |
AQU | END | MUL | PHY ] D-PAPER [ CELLULOSE PULP (CELLULOSE PULP) NoGS
ASPHALT (ASPHALT) LT-1 | CAN UNDISCLOSED LT-1 | CAN | END UNDISCLOSED
LT-UNK | CAN ] HOT MELT ADHESIVE [ UNDISCLOSED LT-UNK UNDISCLOSED LT-1 |
CAN PARAFFIN (PARAFFIN) LT-UNK UNDISCLOSED LT-UNK ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with the HPD
Standard version 2.1, and discloses hazards associated with all known substances present
at or above 1000 parts per million (ppm) in the finished product. Therefore, this HPD is
consistent with the LEED v4 MR credit Building Product Disclosure and Optimization:
Material Ingredient Reporting (Option 1).
Inventory Reporting Format
Nested Materials Method
Basic Method
Threshold Disclosed Per
Material
Product
Threshold level
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals/Impurities
Residuals/Impurities
Considered in 3 of 3
Materials
Explanation(s) provided
for Residuals/Impurities?
Yes No
Yes No
Yes No
Yes No
Are All Substances Above the Threshold Indicated:
Characterized
Percent Weight and Role Provided?
Screened
Using Priority Hazard Lists with Results
Disclosed?
Identified
Name and Identifier Provided?
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCE See Section 3 for additional listings.
Multi-attribute: Environmental Product Declaration (EPD) by UL
Other: ICC-ES Evaluation Report (ESR-1623)
CONSISTENCY WITH OTHER PROGRAMS
Pre-checked for LEED v4 Material Ingredients, Option 1
Third Party Verified?
Yes
No
PREPARER: Self-Prepared
VERIFIER:
VERIFICATION #:
SCREENING DATE: 2017-08-01
PUBLISHED DATE: 2017-08-10
EXPIRY DATE: 2020-08-01
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 1 of 7
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 61
Section 2: Content in Descending Order of Quantity
This section lists contents in a product based on specific threshold(s) and reports detailed health information including hazards. This HPD uses the inventory method indicated above, which is
one of three possible methods:
Basic Inventory method with Product-level threshold.
Nested Material Inventory method with Product-level threshold
Nested Material Inventory method with individual Material-level thresholds
Definitions and requirements for the three inventory methods and requirements for each data field can be found in the HPD Open Standard version 2.1, available on the HPDC website at:
www.hpd-collaborative.org/hpd-2-1-standard
HOT-DIPPED GALVANIZED STEEL (G60) %: 55.0000 - 71.0000 HPD URL:
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present from this material above the inventory threshold
indicated for the finished product that return a GS score of BM-1, LT-1 or LT-P1, based on information provided in supplier SDS and as predicted
by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Specific guidelines are being created to address known issues related to transparency and disclosure for several materials
(“Special Conditions”), including Metal Alloys such as Steel. This HPD will be updated as appropriate when the guidelines for Steel are released.
Passivation coatings for corrosion resistance are an industry standard for this type of material; however, the substances used for such coatings fall
below the inventory threshold (0.1% or 1000 ppm) of the material, and are therefore not reported here.
STEEL (STEEL) ID: 12597-69-2
%: 97.4000 - 98.7000 GS: NoGS RC: Both NANO: No ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 37% pre- and post-consumer recycled steel sourced from several domestic (USA)
suppliers. This substance is considered essentially inert for the purposes of Pharos toxics scoring (Pharos CML).
ZINC (ZINC) ID: 7440-66-6
%: 1.3000 - 2.6000 GS: LT-P1 RC: None NANO: No ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting effects
ENDOCRINE TEDX - Potential Endocrine Disruptors Potential Endocrine Disruptor
MULTIPLE German FEA - Substances Hazardous to Waters Class 2 - Hazard to Waters
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to air
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H260 - In contact with water releases flammable gases which may ignite
spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing (e.g. welding, sawing, etc) during
installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-
specifications.
D-PAPER %: 28.1000 - 42.3000 HPD URL:
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 2 of 7
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236262
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present in this material above the inventory threshold indicated
for the product that return a GS score of BM-1, LT-1 or LT-P1, based on information provided in supplier SDS and as predicted by process
chemistry (Pharos CML).
OTHER MATERIAL NOTES: Asphalt saturated "D-Paper" attached to metal lath using Hot Melt Adhesive.
CELLULOSE PULP (CELLULOSE PULP) ID: 65996-61-4
%: 50.0000 - 75.0000 GS: NoGS RC: None NANO: No ROLE: Liner Paper Substrate
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: This substance is considered essentially inert for the purposes of Pharos toxics scoring.
ASPHALT (ASPHALT) ID: 8052-42-4
%: 25.0000 - 50.0000 GS: LT-1 RC: None NANO: No ROLE: Liner Paper Reinforcement
HAZARDS: AGENCY(IES) WITH WARNINGS:
CANCER IARC Group 2b - Possibly carcinogenic to humans
CANCER US CDC - Occupational Carcinogens Occupational Carcinogen
CANCER MAK Carcinogen Group 2 - Considered to be carcinogenic for man
SUBSTANCE NOTES: Pharos CML lists all Known or Potential Residuals at less than 0.01%.
UNDISCLOSED
%: 0.5000 - 1.0000 GS: LT-1 RC: None NANO: No ROLE: Pigment; Filler
HAZARDS: AGENCY(IES) WITH WARNINGS:
CANCER US CDC - Occupational Carcinogens Occupational Carcinogen
CANCER CA EPA - Prop 65 Carcinogen - specific to chemical form or exposure route
CANCER IARC Group 2B - Possibly carcinogenic to humans - inhaled from occupational
sources
ENDOCRINE TEDX - Potential Endocrine Disruptors Potential Endocrine Disruptor
CANCER MAK Carcinogen Group 3A - Evidence of carcinogenic effects but not sufficient
to establish MAK/BAT value
SUBSTANCE NOTES: Identified on the US EPA Safer Chemical Ingredient List. Warnings are restricted to respirable forms of this substance, and thus are not expected to
apply when bound in the matrix of the finished product. Supplier has shared substance name and CASRN under the terms of a non-disclosure agreement; substance to
remain proprietary to supplier. Substance has been screened against HPD Priority Lists with results disclosed.
UNDISCLOSED
%: 0.1000 - 0.2000 GS: LT-UNK RC: None NANO: No ROLE: Filler
HAZARDS: AGENCY(IES) WITH WARNINGS:
CANCER MAK Carcinogen Group 3B - Evidence of carcinogenic effects but not sufficient
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 3 of 7
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 63
for classification
SUBSTANCE NOTES: Identified on the US EPA Safer Chemical Ingredient List. Supplier has shared substance name and CASRN under the terms of a non-disclosure
agreement; substance to remain proprietary to supplier. Substance has been screened against HPD Priority Lists with results disclosed.
HOT MELT ADHESIVE %: 4.3000 - 6.5000 HPD URL:
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present from this material above the inventory threshold
indicated for the finished product that return a GS score of BM-1, LT-1 or LT-P1, based on information provided in supplier SDS and as predicted
by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Hot Melt Adhesive used to attach D-Paper to metal lath.
UNDISCLOSED
%: 40.0000 - 45.0000 GS: LT-UNK RC: None NANO: No ROLE: Adhesive Binder
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Supplier has shared substance name and CASRN under the terms of a non-disclosure agreement; substance to remain proprietary to supplier.
Substance has been screened against HPD Priority Lists with results disclosed.
UNDISCLOSED
%: 39.5000 - 44.5000 GS: LT-1 RC: None NANO: No ROLE: Adhesive Modifier
HAZARDS: AGENCY(IES) WITH WARNINGS:
CANCER IARC Group 2b - Possibly carcinogenic to humans
CANCER US CDC - Occupational Carcinogens Occupational Carcinogen
CANCER MAK Carcinogen Group 2 - Considered to be carcinogenic for man
SUBSTANCE NOTES: Supplier has shared substance name and CASRN under the terms of a non-disclosure agreement; substance to remain proprietary to supplier.
Substance has been screened against HPD Priority Lists with results disclosed. May also include another undisclosed CASRN (NoGS; No warnings found on HPD
Priority lists).
PARAFFIN (PARAFFIN) ID: 8002-74-2
%: 15.0000 - 20.0000 GS: LT-UNK RC: None NANO: No ROLE: Adhesive Wax
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
UNDISCLOSED
%: 0.5000 - 0.5000 GS: LT-UNK RC: None NANO: No ROLE: Antioxidant
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 4 of 7
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236264
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: Identified on the US EPA Safer Chemical Ingredient List. Supplier has shared substance name and CASRN under the terms of a non-disclosure
agreement; substance to remain proprietary to supplier. Substance has been screened against HPD Priority Lists with results disclosed. This substance falls below the
declared Inventory Threshold for the product.
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTE Environmental Product
Declaration (EPD) by UL
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
http://www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
ISSUE
DATE:2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER OR
LAB: UL
Environment
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental Product Declaration covers the following
CEMCO Cold-Formed Steel Framing Systems, including: Structural Stud and Track (ICC-ES ESR 3016); ViperStud Interior Framing (ICC-
ES ESR 2620); ProX Header (IAPMO ER-0286); SureBoard for Shear panels (IAPMO ER-0126); Sure-Span Floor Joist Framing System
(ESR PENDING); CST/SLP-TRK, and FAS Track 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-
Stud Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering Accessories (ICC- ES ESR 1623);
Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips, and Channels (ICC-ES ESR 3016).
OTHER ICC-ES Evaluation Report (ESR-1623)
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: All
CERTIFICATE URL: http://www.icc-es.org/reports/pdf_files/ICC-
ES/ESR-1623.pdf
ISSUE DATE:2015-05-01 EXPIRY DATE: 2019-05-01 CERTIFIER OR LAB: ICC Evaluation
Services
CERTIFICATION AND COMPLIANCE NOTES: EVALUATION SUBJECT: CEMCO METAL LATH PRODUCTS. EVALUATION SCOPE: Compliance
with the following codes: 2012, 2009 and 2006 International Building Code®; 2012, 2009 and 2006 International Residential Code®; 2013
Abu Dhabi International Building Code (ADIBC). Property evaluated: Physical properties. Products include: CEMCO 2.5 Expanded
Diamond Mesh Metal Lath; CEMCO 2.5 Self-Furred Expanded Diamond Mesh Metal Lath; CEMCO 3.4 Expanded Diamond Mesh Metal
Lath; CEMCO 3.4 Self-Furred Expanded Diamond Mesh Metal Lath; 1/8-inch Self- Furred Flat Rib Lath; 3/8-inch 3.4 Hi Rib Lath.
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
No accessories are required for this product.
Section 5: General Notes
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 5 of 7
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 65
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 6 of 7
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 6 of 7
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236266
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
with the HPD standard noted.
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 7 of 7
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 6 of 7
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
with the HPD standard noted.
Metal Lath with D-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 7 of 7
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 67
Metal Lath with K-Paper by CEMCO
Health ProductDeclaration v2.1
CLASSIFICATION: 09 22 36.23 Metal Lath created via: HPDC Online Builder
PRODUCT DESCRIPTION: This HPD covers CEMCO Metal Lath products with K-Paper, including 1/8" CEM-MESH Flat Rib Metal Lath, and
3/8" Hi-Rib Metal Lath. CEMCO’s CEM-MESH Flat-Rib with K-Paper is a more rigid lath with 1/8" longitudinal ribs spaced at 3" on-center that
provide for wider spacing between wooden or metal supports. Backed with 2 strips of K-Paper, this lath is ideal for machine applied plaster.
CEMCO’s 3/8" Hi-Rib Metal Lath is the most rigid of all metal laths. With full 3/8" ribs longitudinally spaced at 4" apart, and a 1/8" rib between
them, Hi-Rib lath is able to span up to 24" on center. The 3" strips of K-Paper attached to the spaces between the 3/8" ribs minimize blow
through of plaster when machine applied. This lath can be used in both vertical and horizontal applications. All CEMCO Metal Lath products are
produced from standard G60 hot-dipped galvanized steel, and meet or exceed industry standards. CEMCO's Metal Lath products are certified
code compliant via ICC-ES ESR-1623.
Section 1: Summary Nested Method / Product Threshold
CONTENT INVENTORY
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening individual chemical substances
against HPD Priority Hazard Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will expose individuals to its
chemical substances or any health risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G60) [ STEEL (STEEL) NoGS ZINC (ZINC) LT-P1 |
AQU | END | MUL | PHY ] NATURAL KRAFT PAPER [ KRAFT PAPER (KRAFT PAPER)
NoGS ] HOT-MELT ADHESIVE [ ETHYLENE VINYL ACETATE POLYMER (EVA)
(ETHYLENE VINYL ACETATE POLYMER (EVA)) LT-UNK PETROLEUM RESINS
(PETROLEUM RESINS) LT-1 | CAN PENTAERYTHRITOL ROSINATE
(PENTAERYTHRITOL ROSINATE) LT-UNK POLYETHYLENE (POLYETHYLENE) LT-UNK
]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with the HPD
Standard version 2.1, and discloses hazards associated with all known substances present
at or above 1000 parts per million (ppm) in the finished product. Therefore, this HPD is
consistent with the LEED v4 MR credit Building Product Disclosure and Optimization:
Material Ingredient Reporting (Option 1).
Inventory Reporting Format
Nested Materials Method
Basic Method
Threshold Disclosed Per
Material
Product
Threshold level
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals/Impurities
Residuals/Impurities
Considered in 3 of 3
Materials
Explanation(s) provided
for Residuals/Impurities?
Yes No
Yes No
Yes No
Yes No
Are All Substances Above the Threshold Indicated:
Characterized
Percent Weight and Role Provided?
Screened
Using Priority Hazard Lists with Results
Disclosed?
Identified
Name and Identifier Provided?
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCE See Section 3 for additional listings.
Multi-attribute: Environmental Product Declaration (EPD) by UL
Other: ICC-ES Evaluation Report (ESR-1623)
CONSISTENCY WITH OTHER PROGRAMS
Pre-checked for LEED v4 Material Ingredients, Option 1
Third Party Verified?
Yes
No
PREPARER: Self-Prepared
VERIFIER:
VERIFICATION #:
SCREENING DATE: 2017-08-21
PUBLISHED DATE: 2017-08-21
EXPIRY DATE: 2020-08-21
Metal Lath with K-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 1 of 6
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236268
Section 2: Content in Descending Order of Quantity
This section lists contents in a product based on specific threshold(s) and reports detailed health information including hazards. This HPD uses the inventory method indicated above, which is
one of three possible methods:
Basic Inventory method with Product-level threshold.
Nested Material Inventory method with Product-level threshold
Nested Material Inventory method with individual Material-level thresholds
Definitions and requirements for the three inventory methods and requirements for each data field can be found in the HPD Open Standard version 2.1, available on the HPDC website at:
www.hpd-collaborative.org/hpd-2-1-standard
HOT-DIPPED GALVANIZED STEEL (G60) %: 88.3000 - 89.3000 HPD URL:
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present from this material above the inventory threshold
indicated for the finished product that return a GS score of BM-1, LT-1 or LT-P1, based on information provided in supplier SDS and as predicted
by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Specific guidelines are being created to address known issues related to transparency and disclosure for several materials
(“Special Conditions”), including Metal Alloys such as Steel. This HPD will be updated as appropriate when the guidelines for Steel are released.
Passivation coatings for corrosion resistance are an industry standard for this type of material; however, the substances used for such coatings fall
below the inventory threshold (0.1% or 1000 ppm) of the material, and are therefore not reported here.
STEEL (STEEL) ID: 12597-69-2
%: 97.4000 - 98.7000 GS: NoGS RC: Both NANO: No ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 37% pre- and post-consumer recycled steel sourced from several domestic (USA)
suppliers. This substance is considered essentially inert for the purposes of Pharos toxics scoring (Pharos CML).
ZINC (ZINC) ID: 7440-66-6
%: 1.3000 - 2.6000 GS: LT-P1 RC: None NANO: No ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting effects
ENDOCRINE TEDX - Potential Endocrine Disruptors Potential Endocrine Disruptor
MULTIPLE German FEA - Substances Hazardous to Waters Class 2 - Hazard to Waters
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to air
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H260 - In contact with water releases flammable gases which may ignite
spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing (e.g. welding, sawing, etc) during
installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-
specifications.
NATURAL KRAFT PAPER %: 8.6000 - 9.3000 HPD URL:
Metal Lath with K-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 2 of 6
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 69
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present from this material above the inventory threshold
indicated for the finished product that return a GS score of BM-1, LT-1 or LT-P1, based on information provided in supplier SDS and as predicted
by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Two strips of "K-Paper" attached to metal lath using Hot-Melt Adhesive.
KRAFT PAPER (KRAFT PAPER) ID: Not registered
%: 100.0000 - 100.0000 GS: NoGS RC: None NANO: No ROLE: Liner Paper: Substrate
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: This substance is considered essentially inert for the purposes of Pharos toxics scoring (Pharos CML). This substance does not currently have an
assigned CAS number, and thus is not considered to be "Identified" on this HPD.
HOT-MELT ADHESIVE %: 2.1000 - 2.3000 HPD URL:
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present from this material above the inventory threshold
indicated for the finished product that return a GS score of BM-1, LT-1 or LT-P1, based on information provided in supplier SDS and as predicted
by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Hot-Melt Adhesive used to attach K-Paper to metal lath. Percent of substances given as ranges in order to protect the
proprietary nature of supplier's formulation.
ETHYLENE VINYL ACETATE POLYMER (EVA) (ETHYLENE VINYL ACETATE POLYMER
(EVA))
ID: 24937-78-8
%: 35.0000 - 40.0000 GS: LT-UNK RC: None NANO: No ROLE: Hot Melt Adhesive
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
PETROLEUM RESINS (PETROLEUM RESINS) ID: 64742-16-1
%: 30.0000 - 35.0000 GS: LT-1 RC: None NANO: No ROLE: Modifier
HAZARDS: AGENCY(IES) WITH WARNINGS:
CANCER IARC Group 2b - Possibly carcinogenic to humans
CANCER US CDC - Occupational Carcinogens Occupational Carcinogen
CANCER MAK Carcinogen Group 2 - Considered to be carcinogenic for man
SUBSTANCE NOTES:
PENTAERYTHRITOL ROSINATE (PENTAERYTHRITOL ROSINATE) ID: 8050-26-8
%: 15.0000 - 20.0000 GS: LT-UNK RC: None NANO: No ROLE: Modifier
Metal Lath with K-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 3 of 6
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236270
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
POLYETHYLENE (POLYETHYLENE) ID: 9002-88-4
%: 10.0000 - 15.0000 GS: LT-UNK RC: None NANO: No ROLE: Raw Material
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES:
Section 3: Certifications and Compliance
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTE Environmental Product
Declaration (EPD) by UL
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
http://www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
ISSUE
DATE:2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER OR
LAB: UL
Environment
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Environmental Product Declaration covers the following
CEMCO Cold-Formed Steel Framing Systems, including: Structural Stud and Track (ICC-ES ESR 3016); ViperStud Interior Framing (ICC-
ES ESR 2620); ProX Header (IAPMO ER-0286); SureBoard for Shear panels (IAPMO ER-0126); Sure-Span Floor Joist Framing System
(ESR PENDING); CST/SLP-TRK, and FAS Track 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG SHAFTWALL Brand CH and H-
Stud Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering Accessories (ICC- ES ESR 1623);
Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips, and Channels (ICC-ES ESR 3016).
OTHER ICC-ES Evaluation Report (ESR-1623)
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: All
CERTIFICATE URL: http://www.icc-es.org/reports/pdf_files/ICC-
ES/ESR-1623.pdf
ISSUE DATE:2015-05-01 EXPIRY DATE: 2019-05-01 CERTIFIER OR LAB: ICC Evaluation
Services
CERTIFICATION AND COMPLIANCE NOTES: EVALUATION SUBJECT: CEMCO METAL LATH PRODUCTS. EVALUATION SCOPE: Compliance
with the following codes: 2012, 2009 and 2006 International Building Code®; 2012, 2009 and 2006 International Residential Code®; 2013
Abu Dhabi International Building Code (ADIBC). Property evaluated: Physical properties. Products include: CEMCO 2.5 Expanded
Diamond Mesh Metal Lath; CEMCO 2.5 Self-Furred Expanded Diamond Mesh Metal Lath; CEMCO 3.4 Expanded Diamond Mesh Metal
Lath; CEMCO 3.4 Self-Furred Expanded Diamond Mesh Metal Lath; 1/8-inch Self- Furred Flat Rib Lath; 3/8-inch 3.4 Hi Rib Lath.
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
Metal Lath with K-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 4 of 6
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 71
No accessories are required for this product.
Section 5: General Notes
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
Metal Lath with K-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 5 of 6
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236272
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
with the HPD standard noted.
Metal Lath with K-Paper
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 6 of 6
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 73
Steel Framing Components for USG Shaft Wall Systems by CEMCO
Health ProductDeclaration v2.1
CLASSIFICATION: 09 22 16 Finishes: Non-Structural Metal Framing created via: HPDC Online Builder
PRODUCT DESCRIPTION: USG, in partnership with CEMCO, presents the construction industry’s best performing shaftwall, fire wall, and party
wall components. USG Shaft Wall Systems are non-loadbearing gypsum wall partition assemblies constructed from outside the shaft at each
floor. CEMCO is the licensed manufacturer of the metal framing components for the USG Shaft Wall Systems, which include the C-H Stud, J-
Runner, Jamb-Strut, and E-Stud. “C-H” Shaft Wall Studs (18 mil, 34 mil) are fabricated in web depths of 2-1/2", 4", and 6" each with a short-
flange width of 1-3/8" and long-flange width of 1-1/2". “JR” J-Runners (23 mil, 34 mil) are fabricated in web depths of 2-1/2", 4", and 6" with a
short leg of 1", and a long leg of 2". Jamb-Strut members (20 mil, 34 mil) are fabricated with stud member depths of 2-1/2", 4", and 6" with a short
leg of 1", and a long leg of 2". E-Studs (18 mil, 34 mil) are fabricated in web depths of 2-1/2", 4" and 6", each with a short flange of 3/4" and a
long flange of 1". All steel framing components for USG Shaft Wall System manufactured by CEMCO are produced from hot-dipped galvanized
steel in standard G40 coating. G60 is available upon special request.
Section 1: Summary Nested Method / Product Threshold
CONTENT INVENTORY
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening individual chemical substances
against HPD Priority Hazard Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will expose individuals to its
chemical substances or any health risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G40) [ STEEL (STEEL) NoGS ZINC (ZINC) LT-P1 |
AQU | END | MUL | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with the HPD
Standard version 2.1, and discloses hazards associated with all substances present at or
above 1000 parts per million (ppm) in the finished product, along with the role and percent
weight. Therefore, this HPD is consistent with the LEED v4 MR credit Building Product
Disclosure and Optimization: Material Ingredient Reporting (Option 1).
Inventory Reporting Format
Nested Materials Method
Basic Method
Threshold Disclosed Per
Material
Product
Threshold level
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals/Impurities
Residuals/Impurities
Considered in 1 of 1
Materials
Explanation(s) provided
for Residuals/Impurities?
Yes No
Yes No
Yes No
Yes No
Are All Substances Above the Threshold Indicated:
Characterized
Percent Weight and Role Provided?
Screened
Using Priority Hazard Lists with Results
Disclosed?
Identified
Name and Identifier Provided?
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCE See Section 3 for additional listings.
Multi-attribute: Environmental Product Declaration (EPD) by UL
CONSISTENCY WITH OTHER PROGRAMS
Pre-checked for LEED v4 Material Ingredients, Option 1
Third Party Verified?
Yes
No
PREPARER: Self-Prepared
VERIFIER:
VERIFICATION #:
SCREENING DATE: 2017-08-29
PUBLISHED DATE: 2017-08-29
EXPIRY DATE: 2020-08-29
Steel Framing Components for USG Shaft Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 1 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236274
Section 2: Content in Descending Order of Quantity
This section lists contents in a product based on specific threshold(s) and reports detailed health information including hazards. This HPD uses the inventory method indicated above, which is
one of three possible methods:
Basic Inventory method with Product-level threshold.
Nested Material Inventory method with Product-level threshold
Nested Material Inventory method with individual Material-level thresholds
Definitions and requirements for the three inventory methods and requirements for each data field can be found in the HPD Open Standard version 2.1, available on the HPDC website at:
www.hpd-collaborative.org/hpd-2-1-standard
HOT-DIPPED GALVANIZED STEEL (G40) %: 100.0000 - 100.0000 HPD URL:
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present at or above the Content Inventory Threshold indicated
that have a GS score of BM-1, LT-1 or LT-P1 based on supplier SDS and as predicted by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Specific guidelines are being created to address known issues related to transparency and disclosure for several materials
(“Special Conditions”), including Metal Alloys such as steel. This HPD will be updated as appropriate when the guidelines for Steel are released.
Passivation coatings for corrosion resistance are an industry standard for this type of material; however, the substances used for such coatings fall
below the inventory threshold (0.1% or 1000 ppm) of the material, and are therefore not reported here.
STEEL (STEEL) ID: 12597-69-2
%: 96.3000 - 98.3000 GS: NoGS RC: Both NANO: No ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced from several domestic (USA)
suppliers. This substance is considered essentially inert for the purposes of Pharos toxics scoring (Pharos CML).
ZINC (ZINC) ID: 7440-66-6
%: 1.7000 - 3.7000 GS: LT-P1 RC: None NANO: No ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting effects
ENDOCRINE TEDX - Potential Endocrine Disruptors Potential Endocrine Disruptor
MULTIPLE German FEA - Substances Hazardous to Waters Class 2 - Hazard to Waters
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to air
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H260 - In contact with water releases flammable gases which may ignite
spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing (e.g. welding, sawing, etc) during
installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-
specifications.
Section 3: Certifications and Compliance
Steel Framing Components for USG Shaft Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 2 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 75
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTE Environmental Product
Declaration (EPD) by UL
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
http://www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
ISSUE
DATE:2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER OR
LAB: UL
Environment
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Type III Environmental Product Declaration covers the
following CEMCO Cold-Formed Steel Framing Systems, including: Structural Stud and Track (ICC-ES ESR 3016); ViperStud® Interior
Framing (ICC-ES ESR 2620); ProX Header® (IAPMO ER-0286); SureBoard® for Shear panels (IAPMO ER- 0126); Sure-Span® Floor
Joist Framing System (ESR PENDING); CST/SLP-TRK®, and FAS Track® 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG
SHAFTWALL Brand CH and H-Stud Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering
Accessories (ICC-ES ESR 1623); Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips, and Channels (ICC-ES ESR 3016).
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
SHEETROCK® BRAND GYPSUM PANELS HPD URL: https://www.hpd-collaborative.org/hpd-public-repository/
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES:
Installation of USG Shaft Wall Systems. The assemblies are constructed of gypsum liner panels friction-fitted into C-H studs in a progressive manner,
with gypsum panels, gypsum fiber panels or cement board applied to the face.
DUROCK® CEMENT BOARD HPD URL: https://www.hpd-collaborative.org/hpd-public-repository/
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES:
Installation of USG Shaft Wall Systems. The assemblies are constructed of gypsum liner panels friction-fitted into C-H studs in a progressive manner,
with gypsum panels, gypsum fiber panels or cement board applied to the face.
SHEETROCK® BRAND INTERIOR FINISHING PRODUCTS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES:
Finish all face layer joints and internal angles with a Sheetrock® interior finishing system installed according to manufacturer’s directions.
Section 5: General Notes
Section 6: References
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO CONTACT NAME: Fernando Sesma
Steel Framing Components for USG Shaft Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 3 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236276
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
with the HPD standard noted.
Steel Framing Components for USG Shaft Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 4 of 4
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 77
Steel Framing Components for USG Area Separation Wall Systems by CEMCO
Health ProductDeclaration v2.1
CLASSIFICATION: 09 22 16 Finishes: Non-Structural Metal Framing created via: HPDC Online Builder
PRODUCT DESCRIPTION: USG, in partnership with CEMCO, presents the construction industry’s best performing shaftwall, fire wall, and party
wall components. USG Area Separation Wall Systems are lightweight, non-loadbearing gypsum panel partition assemblies used to provide fire-
resistive protection for common walls in townhouse construction. Area separation walls are designed to allow for collapse of the construction on
the fire-exposed side, without collapse of the entire wall, thus protecting the adjacent townhouse. CEMCO is the licensed manufacturer of the
metal framing components for the USG Area Separation Wall Systems, which include the C-Runner, H-Stud, and Aluminum Breakaway Clip. C-
Runners (18 mil, 24 mil) are fabricated with a width of 2", legs of 1", and length of 10'. "H" Shaft Wall Studs (18 mil, 34 mil) are fabricated with a
width of 2", depth of 1-3/8", and length of 8' to 16'. All steel framing components for USG Shaft Wall System manufactured by CEMCO are
produced from hot-dipped galvanized steel in standard G40 coating. G60 is available upon special request. This HPD covers steel framing
components only.
Section 1: Summary Nested Method / Product Threshold
CONTENT INVENTORY
CONTENT IN DESCENDING ORDER OF QUANTITY
Summary of product contents and results from screening individual chemical substances
against HPD Priority Hazard Lists and the GreenScreen for Safer Chemicals®. The HPD
does not assess whether using or handling this product will expose individuals to its
chemical substances or any health risk. Refer to Section 2 for further details.
MATERIAL | SUBSTANCE | RESIDUAL OR IMPURITY
GREENSCREEN SCORE | HAZARD TYPE
HOT-DIPPED GALVANIZED STEEL (G40) [ STEEL (STEEL) NoGS ZINC (ZINC) LT-P1 |
AQU | END | MUL | PHY ]
Number of Greenscreen BM-4/BM3 contents.......... 0
Contents highest concern GreenScreen
Benchmark or List translator Score.............. LT-P1
Nanomaterial............. No
INVENTORY AND SCREENING NOTES:
This Health Product Declaration (HPD) was completed in accordance with the HPD
Standard version 2.1, and discloses hazards associated with all substances present at or
above 1000 parts per million (ppm) in the finished product, along with the role and percent
weight. Therefore, this HPD is consistent with the LEED v4 MR credit Building Product
Disclosure and Optimization: Material Ingredient Reporting (Option 1).
Inventory Reporting Format
Nested Materials Method
Basic Method
Threshold Disclosed Per
Material
Product
Threshold level
100 ppm
1,000 ppm
Per GHS SDS
Per OSHA MSDS
Other
Residuals/Impurities
Residuals/Impurities
Considered in 1 of 1
Materials
Explanation(s) provided
for Residuals/Impurities?
Yes No
Yes No
Yes No
Yes No
Are All Substances Above the Threshold Indicated:
Characterized
Percent Weight and Role Provided?
Screened
Using Priority Hazard Lists with Results
Disclosed?
Identified
Name and Identifier Provided?
VOLATILE ORGANIC COMPOUND (VOC) CONTENT
VOC Content data is not applicable for this product category.
CERTIFICATIONS AND COMPLIANCE See Section 3 for additional listings.
Multi-attribute: Environmental Product Declaration (EPD) by UL
CONSISTENCY WITH OTHER PROGRAMS
Pre-checked for LEED v4 Material Ingredients, Option 1
Third Party Verified?
Yes
No
PREPARER: Self-Prepared
VERIFIER:
VERIFICATION #:
SCREENING DATE: 2017-08-29
PUBLISHED DATE: 2017-08-29
EXPIRY DATE: 2020-08-29
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 1 of 5
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236278
Section 2: Content in Descending Order of Quantity
This section lists contents in a product based on specific threshold(s) and reports detailed health information including hazards. This HPD uses the inventory method indicated above, which is
one of three possible methods:
Basic Inventory method with Product-level threshold.
Nested Material Inventory method with Product-level threshold
Nested Material Inventory method with individual Material-level thresholds
Definitions and requirements for the three inventory methods and requirements for each data field can be found in the HPD Open Standard version 2.1, available on the HPDC website at:
www.hpd-collaborative.org/hpd-2-1-standard
HOT-DIPPED GALVANIZED STEEL (G40) %: 100.0000 - 100.0000 HPD URL:
PRODUCT THRESHOLD: 1000 ppm RESIDUALS AND IMPURITIES CONSIDERED: Yes
RESIDUALS AND IMPURITIES NOTES: No residuals or impurities are known or expected to be present at or above the Content Inventory Threshold indicated
that have a GS score of BM-1, LT-1 or LT-P1 based on supplier SDS and as predicted by process chemistry (Pharos CML).
OTHER MATERIAL NOTES: Specific guidelines are being created to address known issues related to transparency and disclosure for several materials
(“Special Conditions”), including Metal Alloys such as steel. This HPD will be updated as appropriate when the guidelines for Steel are released.
Passivation coatings for corrosion resistance are an industry standard for this type of material; however, the substances used for such coatings fall
below the inventory threshold (0.1% or 1000 ppm) of the material, and are therefore not reported here.
STEEL (STEEL) ID: 12597-69-2
%: 96.3000 - 98.3000 GS: NoGS RC: Both NANO: No ROLE: Base Metal
HAZARDS: AGENCY(IES) WITH WARNINGS:
None Found No warnings found on HPD Priority lists
SUBSTANCE NOTES: CEMCO cold-formed steel framing products contain 30% to 35% pre- and post-consumer recycled steel sourced from several domestic (USA)
suppliers. This substance is considered essentially inert for the purposes of Pharos toxics scoring (Pharos CML).
ZINC (ZINC) ID: 7440-66-6
%: 1.7000 - 3.7000 GS: LT-P1 RC: None NANO: No ROLE: Metallic Coating
HAZARDS: AGENCY(IES) WITH WARNINGS:
ACUTE AQUATIC EU - R-phrases R50 - Very Toxic to Aquatic Organisms
ACUTE AQUATIC EU - GHS (H-Statements) H400 - Very toxic to aquatic life
CHRON AQUATIC EU - GHS (H-Statements) H410 - Very toxic to aquatic life with long lasting effects
ENDOCRINE TEDX - Potential Endocrine Disruptors Potential Endocrine Disruptor
MULTIPLE German FEA - Substances Hazardous to Waters Class 2 - Hazard to Waters
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H250 - Catches fire spontaneously if exposed to air
PHYSICAL HAZARD (REACTIVE) EU - GHS (H-Statements) H260 - In contact with water releases flammable gases which may ignite
spontaneously
SUBSTANCE NOTES: Form-specific hazards not expected to apply to the finished and installed product. However, further processing (e.g. welding, sawing, etc) during
installation may release fumes or other respirable particles. The Safety Data Sheet (SDS) for Galvanized Sheet Steel can be found at http://cemcosteel.com/cemco-
specifications.
Section 3: Certifications and Compliance
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 2 of 5
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 79
This section lists applicable certification and standards compliance information for VOC emissions and VOC content. Other types of health or
environmental performance testing or certifications completed for the product may be provided.
MULTI-ATTRIBUTE Environmental Product
Declaration (EPD) by UL
CERTIFYING PARTY: Third Party
APPLICABLE FACILITIES: City of Industry, CA; Pittsburg, CA; Denver, CO; Forth Worth, TX
CERTIFICATE URL:
http://www.cemcosteel.com/sites/default/files/CEMCOs%20Environmental%20Product%20Declaration_EPD.pdf
ISSUE
DATE:2016-
07-13
EXPIRY
DATE:
2021-
07-13
CERTIFIER OR
LAB: UL
Environment
CERTIFICATION AND COMPLIANCE NOTES: Declaration number: 4787356941.101.1. Type III Environmental Product Declaration covers the
following CEMCO Cold-Formed Steel Framing Systems, including: Structural Stud and Track (ICC-ES ESR 3016); ViperStud® Interior
Framing (ICC-ES ESR 2620); ProX Header® (IAPMO ER-0286); SureBoard® for Shear panels (IAPMO ER- 0126); Sure-Span® Floor
Joist Framing System (ESR PENDING); CST/SLP-TRK®, and FAS Track® 1000 Brand Slotted Tracks (ICC-ES ESR 2012); USG
SHAFTWALL Brand CH and H-Stud Studs and Track (AER 09038); Expanded Metal Lath Products (ICC-ES ESR 1623); Plastering
Accessories (ICC-ES ESR 1623); Drywall/Interior Accessories (ICC-ES ESR 3016); Connectors, Clips, and Channels (ICC-ES ESR 3016).
Section 4: Accessories
This section lists related products or materials that the manufacturer requires or recommends for installation (such as adhesives or fasteners),
maintenance, cleaning, or operations. For information relating to the contents of these related products, refer to their applicable Health Product
Declarations, if available.
SHEETROCK® BRAND GYPSUM PANELS HPD URL: https://www.hpd-collaborative.org/hpd-public-repository/
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES:
Installation of USG Area Separation Wall Systems.
ALUMINUM BREAKAWAY CLIP BY CEMCO HPD URL: https://www.hpd-collaborative.org/hpd-public-repository/
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES:
Installation of USG Area Separation Wall Systems. Aluminum Breakaway Clips attach the separation wall to the adjacent framing. When one side of
the separation wall is exposed to fire, the clips are designed to soften and break away. This allows the structure on the fire side of the separation wall
to collapse, while the clips on the unexposed side of the separation wall continue to support the separation wall.
SHEETROCK® ACOUSTICAL SEALANT HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES:
Installation of USG Area Separation Wall Systems.
SHEETROCK® BRAND INTERIOR FINISHING PRODUCTS HPD URL: No HPD available
CONDITION WHEN RECOMMENDED OR REQUIRED AND/OR OTHER NOTES:
Finish all face layer joints and internal angles with a Sheetrock® interior finishing system installed according to manufacturer’s directions.
Section 5: General Notes
Section 6: References
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 3 of 5
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236280
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 4 of 5
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 4 of 5
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 81
MANUFACTURER INFORMATION
MANUFACTURER: CEMCO
ADDRESS: 13191 Crossroads Pkwy. North
Suite 325
City of Industry CA 91746, USA
WEBSITE: www.cemcosteel.com
CONTACT NAME: Fernando Sesma
TITLE: Director of Technical Services
PHONE: 800.416.2278
EMAIL: fsesma@cemcosteel.com
KEY
OSHA MSDS Occupational Safety and Health Administration Material Safety Data Sheet
GHS SDS Globally Harmonized System of Classi cation and Labeling of Chemicals Safety Data Sheet
Hazard Types
AQU Aquatic toxicity
CAN Cancer
DEV Developmental toxicity
END Endocrine activity
EYE Eye irritation/corrosivity
GEN Gene mutation
GLO Global warming
MAM Mammalian/systemic/organ toxicity
MUL Multiple hazards
NEU Neurotoxicity
OZO Ozone depletion
PBT Persistent Bioaccumulative Toxic
PHY Physical Hazard (reactive)
REP Reproductive toxicity
RES Respiratory sensitization
SKI Skin sensitization/irritation/corrosivity
LAN Land Toxicity
NF Not found on Priority Hazard Lists
GreenScreen (GS)
BM-4 Benchmark 4 (prefer-safer chemical)
BM-3 Benchmark 3 (use but still opportunity for improvement)
BM-2 Benchmark 2 (use but search for safer substitutes)
BM-1 Benchmark 1 (avoid - chemical of high concern)
BM-U Benchmark Unspeci ed (insu cient data to benchmark)
LT-P1 List Translator Possible Benchmark 1
LT-1 List Translator Likely Benchmark 1
LT-UNK List Translator Benchmark Unknown (insufficient information
from List Translator lists to benchmark)
NoGS Unknown (no data on List Translator Lists)
Recycled Types
PreC Preconsumer (Post-Industrial)
PostC Postconsumer
Both Both Preconsumer and Postconsumer
Unk Inclusion of recycled content is unknown
None Does not include recycled content
Other Terms
Inventory Methods:
Nested Method / Material Threshold Substances listed within each material per threshold indicated per material
Nested Method / Product Threshold Substances listed within each material per threshold indicated per product
Basic Method / Product Threshold Substances listed individually per threshold indicated per produc
Nano Composed of nano scale particles or nanotechnology
Third Party Verified Verification by independent certifier approved by HPDC
Preparer Third party preparer, if not self-prepared by manufacturer
Applicable facilities Manufacturing sites to which testing applies
The Health Product Declaration (HPD) Open Standard provides for the disclosure of product contents and potential associated human and environmental health hazards.
Hazard associations are based on the HPD Priority Hazard Lists, the GreenScreen List Translator™, and when available, full GreenScreen® assessments. The HPD Open
Standard v2.1 is not:
a method for the assessment of exposure or risk associated with product handling or use,
a method for assessing potential health impacts of: (i) substances used or created during the manufacturing process or (ii) substances created after the product is
delivered for end use.
Information about life cycle, exposure and/or risk assessments performed on the product may be reported by the manufacturer in appropriate Notes sections, and/or, where
applicable, in the Certifications section.
The HPD Open Standard was created and is supported by the Health Product Declaration Collaborative (the HPD Collaborative), a customer-led organization composed of
stakeholders throughout the building industry that is committed to the continuous improvement of building products through transparency, openness, and innovation
throughout the product supply chain.
The product manufacturer and any applicable independent verifier are solely responsible for the accuracy of statements and claims made in this HPD and for compliance
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 4 of 5
with the HPD standard noted.
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 5 of 5
with the HPD standard noted.
Steel Framing Components for USG Area Separation Wall Systems
www.hpd-collaborative.org HPD v2.1 created via HPDC Builder Page 5 of 5
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.236282
Notes
LEED v4 and Sustainability Resources | www.cemcosteel.com | 800.775.2362 83
Pittsburg, CA
City of Industry, CA
Denver, CO
Ft. Worth, TX
Corporate Headquarters
13191 Crossroads Parkway North, Suite 325, City of Industry, CA 91746
P: 800.775.2362 | F: 626.330.7598
Southern California Manufacturing Facility
263 North Covina Lane, City of Industry, CA 91746
P: 800.775.2362 | F: 626.330.7598
Northern California Manufacturing Facility
1001-A Pittsburg Antioch Hwy, Pittsburg, CA 94565
P: 925.473.9340 | F: 925.473.9341
Denver Colorado Manufacturing Facility
490 Osage Street, Denver, CO 80204
P: 303.572.3626 | F: 303.572.3627
Fort Worth Texas Manufacturing Facility
8600 Will Rogers Blvd, Fort Worth, TX 76140
P: 817.568.1525 | F: 817.568.2759
www.cemcosteel.com
Expanding Your Solutions
Effective 9/5/2017
Pittsburg, CA
City of Industry, CA
Denver, CO
Ft. Worth, TX
Recommended