View
20
Download
0
Category
Preview:
Citation preview
INTRODUCTION TO THE SIMATIC MANAGER
• The four phases for creating an automation solution• Runtime environment of the SIMATIC Manager• Integrated tools in STEP 7 Professional
1University of Ruse SIMATIC MANAGER
The four phases for creating an automation solution
Planning and Configuring
Implementation and Module Test
Testing and Commissioning
Operation and Maintenance
2University of Ruse SIMATIC MANAGER
SIMATIC software
Runtime environment of the SIMATIC Manager
SIMATIC software
3University of Ruse SIMATIC MANAGER
Integrated tools in STEP 7 Professional
4University of Ruse SIMATIC MANAGER
Block diagram of the SIMATIC Manager
� Tasks of the SIMATIC Manager� Project structure of an automation plant in the SI MATIC Manager
5University of Ruse SIMATIC MANAGER
Tasks of the SIMATIC Manager
6University of Ruse SIMATIC MANAGER
Project structure of an automation plant in the SIM ATIC Manager
7University of Ruse SIMATIC MANAGER
Demonstration of a typical project creation with th e SIMATIC Manager
•Laying out project with station
Planning and Configuring
Implementation and Module Test
Testing and Commissioning
Operation and Maintenance
8University of Ruse SIMATIC MANAGER
•Laying out project with station•Configuring hardware•Projecting connection
•Create the symbols•Develop the control program•Program test module by module•Configure the visualization
•Loading program•Test in the regular operation•Archiving and backup
•Teleservice
Planning and ConfiguringLaying out project with Station
project name
1 generate a new project
2 Insert Station
9University of Ruse SIMATIC MANAGER
storage location
starting the hardware configuration tool
3
Planning and ConfiguringConfiguring Hardware – HW Config
Non SIEMENS Hardware
Update Hardware catalog
10University of Ruse SIMATIC MANAGER
Install Manufacturer GSD file
Hardware catalog
Planning and ConfiguringConfiguring Hardware – HW Config
11University of Ruse SIMATIC MANAGER
Module Address and parameters
Slot No
Planning and ConfiguringConfiguring Hardware – HW Config
Manual tuning
12University of Ruse SIMATIC MANAGER
Negative result of the check
Planning and ConfiguringConfigure network
13University of Ruse SIMATIC MANAGER
Implementation and Module Test
Create the symbols
14University of Ruse SIMATIC MANAGER
Implementation and Module Test
Develop the control program
15University of Ruse SIMATIC MANAGER
Implementation and Module Test
Develop the control program
16University of Ruse SIMATIC MANAGER
SCL Editor
Ladder Editor
Implementation and Module Test
Program test module by module – S7 PLCSIM PLCSIMStart Button
17University of Ruse SIMATIC MANAGER
Simulated inputs
Resulted Outputs
Implementation and Module Test
Configure the visualization – WinCC Flexible
18University of Ruse SIMATIC MANAGER
Testing and Commissioning
Loading program
Program DownloadStart Button
19University of Ruse SIMATIC MANAGER
Program Download
Show program Online
Testing and Commissioning
Test in the regular operation
Monitoring and control of variables
Forcing of variables
20University of Ruse SIMATIC MANAGER
Program status
Single-step mode with stop points
Testing and CommissioningArchiving and backup
21University of Ruse SIMATIC MANAGER
Operation and Maintenance
Teleservice
22University of Ruse SIMATIC MANAGER
Ruse 0359/82824273
Ruse
Literature
1. Berger Hans, Automating with Simatic, Controllers, Software, Programming, Data communication, Operator Control a nd Process Monitoring
2. SIMATIC Configuring Hardware and Communication Co nnections with STEP 7, Manual, A5E00706939-01, SIEMENS Editio n 03/2006.
23University of Ruse SIMATIC MANAGER
Recommended