View
218
Download
0
Category
Tags:
Preview:
DESCRIPTION
http://dustcontrol.com/wysiwyg/Internationalenglish_2014_11.pdf
Citation preview
Accessories andconsumables
143
11
11
Suction HosesTh e hose is the conveying line of the source extraction installation. Th e demands placed on the suction hose are:– wear resistance– low weight and fl exibility– not aff ected by extremes of temperatures– crushproof– does not give static electric shocks
When long suction hoses have to be used their diameter should progressively increase from the suction casing, with the smallest hose nearest the suction casing not exceeding 2–3 m length. Coupling is carried out with external couplings which are easy to use.
Description Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion UV and zone Resistance to Resistance to
(in/mm) Temp °C max/min resistance resistance Welding Fume solvent and oil
Suction hoses standard 3”/76 mm 2001 Blue PE 140/–22/+60/–30 No 2 2 3 3
2”/50 mm 2401 Blue PE 140/–22/+60/–30 No 2 2 3 3
1.5”/38 mm 2111 Blue PE 140/–22/+60/–30 No 2 2 3 3
1.25”/32 mm 2112 Blue PE 140/–22/+60/–30 No 2 2 3 3
1”/25 mm 2113 Blue PE 140/–22/+60/–30 No 2 2 3 3
Suction hoses heat resistant 2”/50 mm 2004 Grey PP(EPDM) 194/–40/+90/–40 No 3 2 1 4
1.5”/38 mm 2003 Grey PP(EPDM) 194/–40/+90/–40 No 3 2 1 4
Suction hoses antistatic 3”/76 mm 2024 Black PE 140/–4/+60/–20 Yes 2 2 3 3
2”/50 mm 2013 Black PE 140/–4/+60/–20 Yes 2 2 3 3
1.5”/38 mm 2012 Black PE 140/–4/+60/–20 Yes 2 2 3 3
1.25”/32 mm 2005 Black PE 140/–4/+60/–20 Yes 2 2 3 3
1”/25 mm 2025 Black PE 140/–4/+60/–20 Yes 2 2 3 3
Suction hoses PU 3”/76 mm 2056 Trans- PU 194/–40/+90/–40 Yes** 1 1 3 1
2”/50 mm 2054 parent PU 248/–40/+120/–40 Yes** 1 1 3 1
1.5”/38 mm 2055 PU 194/–40/+90/–40 Yes** 1 1 3 1
Super D superelastic 2”/50 mm 2039 black/white PVC 185/–23/+85/–5 No 2 2 2 4
1.5”/38 mm 2038 black/white PVC 185/–23/+85/–5 No 2 2 2 4
Scale: 1 Excellent
2 Good
3 Limited
4 Poor
Ø designates the inside of the hose
Suction hoses, antistatic, Ø (in/mm) Part no/m Standard length
3”/76 2024* 32.8 yd/30 m
2”/50 2013* 32.8 yd/30 m
1.5”/38 2012* 32.8 yd/30 m
32 2005* 32.8 yd/30 m
25 2025* 32.8 yd/30 m
Suction hoses PU, extra abrasion resistant, Ø (in/mm) Part no/m Standard length
3”/76 2056** 15’, 30’ / 5 and 10 m
2”/50 2054** 15’, 30’ / 5 and 10 m
1.5”/38 2055** 15’, 30’ / 5 and 10 m
Suction hoses PU, extra abrasion resistant, Ø (in/mm) Part no/m Standard length
2”/50 2039 50’/15 m
1.5”/38 2038 50’/15 m
Suction hoses, standard, Ø (in/mm) Part no/m Standard length
3”/76 2001 16.4 yd/15 m
2”/50 2401 32.8 yd/30 m
1.5”/38 2111 32.8 yd/30 m
1.25”/32 2112 32.8 yd/30 m
1”/25 2113 32.8 yd/30 m
Suction hoses, heat resistant, Ø (in/mm) Part no/m Standard length
2”/50 2004 15’, 30’, 50’/5, 10, 15 m
1.5”/38 2003 15’, 30’, 50’/5, 10, 15 m
Material properties
Antistatic is defi ned as having a conductivity of < 10 6 Ω
To order antistatic certifi cation (ESD) according to Swedish National Testing and Research Institute
(SP) – note an E after the part no.
** The wire helix must be bared and left in contact with conductive material for static discharge.
PU, extra abrasion
resistant
Antistatic
Heat resistant
Standard
For larger dimensions, contact us.
144
11 Suction Hoses
Metal Hose
Description dmin
dmax
Part No
Hose clamp .3”–.6”/8–14 mm 4027
Hose clamp .4”–.7”/11–17 mm 4028
Hose clamp .6”–.9”/15–24 mm 4146
Hose clamp 1”–1.5”/26–38 mm 4197
Hose clamp 1.7”–2.2”/44–56 mm 4075
Hose clamp 2”–2.6”/50–65 mm 4219
Hose clamp 2.3”–3”/58–75 mm 4002
Hose clamp 2.7”–3.3”/68–85 mm 3002
Hose clamp 3”-3.7”/77–95 mm 4090
Hose clamp 3.4”–4.4”/87–112 mm 4310
Hose clamp 4.1”–5.4”/104–138 mm 4138
Hose clamp 5.1”–6.5”/130–165 mm 4040
Hose clamp 5.9”–7.1”/150–180 mm 4137
Hose clamp 7.9”–9.1”/200–231 mm 4464
Hose clamp 8.9”–10.1”/226–256 mm 4102
Ø (in/mm) Part No Temp °F max /Temp °C max Material
2”/50 2150 Flexible 572/+300 Steel
2”/50 2151 Rigid 572/+300 Steel
1.5”/38 2138 Flexible 572/+300 Steel
1.5”/38 2139 Rigid 572/+300 Steel
Diameter Description Part No
Øinv
3/4” Compressed air hose 3/4 2124
Øinv
1/2” Compressed air hose 1/2 2123
Øinv
3/8” Compressed air hose 3/8 2122
Øutv
5 mm Compressed air hose 5 2406
Øutv
6 mm Compressed air hose 6 8482
Øutv
8 mm Compressed air hose 8 8183
Compressed Air Hose
Ventilation HoseDiameter (in/mm) Description Part No
Ø 5”/125 Ventilation hose 4.9”/125 2420
Ø 10”/250 Ventilation hose 10”/250 2032
Hose Clamps
145
11
11
Suction Hoses
kPa/m p
2,5
2,0
1,5
1,0
0,5
0 Q
0 100 200 300 400 m3/h
Ø 25Ø 32
Ø 38
Ø 50
7438
2010
20457421
7437
2011
203374207411013031ø108
7423013045
ø76 3007 7419
2056
2046 7436
X160
X160
X160
ø159
kPa/m
1,0
0,8
0,6
0,4
0,2
00 1000 2000 3000 4000 m3/h
Ø 76
Ø 102
Ø 152
Q
p
Ø designates the inside of the hose
Pressure Loss Suction Hoses
Rubber Suction Hose Couplings for Rubber Suction Hose/Extra Abrasion Resistant
Ø (in/mm) Part No Standard Part No Extra Abrasion Resistant
6”/152 2045 -
4”/102 2011 -
3”/76 See PU-suction hose 2046
ø76
Tube L=100 mm
TECHNICAL DATA
Part No 2011 2046 2045
Material gauge (in/ mm) 0.33/8.5 0.31/8 0.37/9.5
Min radius (in/mm) 11.81/300 8.27/210 18.9/480
Weight (lbs/yd /kg/m) 9.15/4.15 6.55/2.97 15.54/7.05
Temp max (°F /°C) 140/+60 140/+60 140/+60
min (°F /°C) –13/-25 –13/-25 –13/-25
Internal tube PVC PVC PVC
Insert steel helix steel helix steel helix copper wire
External tube Polyester Polyester Polyester
Hose Hanger
Description Part No
Hose Hanger, white enamel 4473
Hose Hanger, stainless 7214
Part No Description
3007 Joint Ø 3”/76
3031 Joint Ø 4.3”/108
3045 Joint Ø 6.3”/160
741101 Pipe connection 4.3”/4”/108/102
7419 Hose clamp 3”/76
7420 Hose clamp 4”/102
7421 Hose clamp 6.3”/160
742301 Pipe connection 6.3”/6”/159/152
7436 Hose connector 3”/X6.3”/76/X160
7437 Hose connector 4”/X6.3”/102/X160
7438 Hose connector 6”/X6.3”/152/X160
146
11 Suction Hoses
X 2”/50
Ø 2”/50
2129
2129
X 1.5”/38
2114
2133
Ø 2”/50
Ø 2”/50
Ø 1.5”/38
Ø 1.25”/32
2131 Ø 1.5”/38
2129
2114
2132
2114
2132
Ø 2”/50
Ø 1.5”/38
Ø 1.25”/32
Ø 1.5”/38
Ø 1.25”/32
2128
Ø 1.25”/32
2171
X 2”/50
Ø 3”/76
Ø 2”/50
X 1.5”/38
2008
2107
2108
Ø 3”/76 2100 Ø 2”/50
Ø 2”/50 2403/2170 Ø 2”/50 2120 Ø 1.5”/38
Ø 1.5”/38 2118/2169 Ø 1.5”/38 2121 Ø 1.25”/32
Ø 1.25”/32 2119/2168 Ø 1.25”/32 2101 Ø 1”/25 2117/2167
Ø 1”/25
2106
2110
2116
Ø .7”/17
Ø 1”/26
Ø 1.25”/32
2109
2107
Ø 1”/26
Ø 1.5”/38
Ø 2”/50
2115
2115
see above
Turnable Hose Connectors
Part No Description2008* Coupling socket 3”/2”/76/50 mm
2100* Intermediate sleeve 3”/2”/76/50 mm
2101* Intermediate sleeve 1.25/1”/32/25mm
2106* Connecting sleeve 7”/1.25”/17/32 mm
2107* Coupling socket 2”/2”/50/50 mm
2108* Coupling socket 2”/1.5”/50/38 mm
2109* Connecting sleeve 1”/1.5”/26/38 mm
2110* Connecting sleeve 1”/1.25/26/32 mm
2115* Connecting sleeve 1.5”/1.5”/38/38 mm
Part No Description2116 Connecting sleeve 1.25/1.25”/32/32 mm
2117 Connecting sleeve 1”/1”/25/25 mm
2118 Hose connector 1.5”/38 mm
2119 Hose connector 1.25”/32 mm
2120* Intermediate sleeve 2”/1.5”/50/38 mm
2121* Intermediate sleeve 1.5/1.25/38/32 mm
2167* Connecting sleeve 1”/1”/25/25 mm
2168* Hose connector 1.25”/32 mm
COUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE
Non-Turnable Hose Connectors
Part No Description2132* Connecting sleeve, turnable 1.25”/1.5/32/38 mm
2133* Coupling socket, turnable 1.5”/1.25”/38/32 mm
2171* Coupling socket, turnable 1.25”/1.25/32/32 mm
Part No Description2169* Hose connector 1.5”/38 mm
2170* Hose connector 2”/50 mm
2403 Hose connector 2”/50 mm
COUPLING SOCKET HOSE CONNECTOR CONNECTING SLEEVEINTERMEDIATE SLEEVE
* Antistatic.106 Ω cm. Please see our antistatic acces-sories from page 158 onwards.
Part No Description2114* Connecting sleeve, turnable 1.5”/1.5”/38/38 mm
2128* Coupling socket, turnable 2”/1.5”/50/38 mm
2129* Coupling socket, turnable 2”/2”/50/50 mm
2131* Intermediate sleeve, turnable 2”/1.5”/50/38 mm
147
11
11
Suction Hoses
Ø 2”/50
2158
2158
2157
Ø 2”/50
Ø 2”/50
Ø 1.5”/38
2160 Ø 1.5”/38
Ø 2”/50
Ø 1.5”/38
Ø 1.5”/38
2158
2159
2159
X 2” /50
Turnable Connectors for Suction Hose; PUCOUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE
Ø 2”/50
Ø 1.5”/38
21292158
21282157
2166
2114
2159
2133
Ø 1.5”/38
Ø 1.25”/32
Extraction Hose Quick CouplersPart No 2166
Part No Description2160* Intermediate sleeve Ø 2”/1.5”/50/38 mm PU, turnable
2161* Coupling socket Ø 3”/2”/76/50 mm, EPDM
2162* Coupling socket Ø 3”/2”/76/50 mm, Nitrile
* Antistatic; Please see our antistatic accessories from page 158
onwards.
Ø 3”/76
2161
2162
Ø 2”/50
Ø 2”/50
Non-Turnable Connectors for Suction Hose; PUPart No Description
2157* Coupling socket Ø 2”/1.5”/50/38 mm PU, turnable
2158* Coupling socket Ø 2”/2”/50/50 mm PU, turnable
2159* Connecting sleeve Ø 1.5”/1.5”/38/38 mm PU, turnable
see above
see above
Multi Connection for Integrated Suction CasingsPart No 42497
Part No Description
42497* Multi connection for intergrated suction casings
2114* Connecting sleeve, turnable 38/38
2115* Connecting sleeve 38/38
*Antistatic EPDM
424972114
2115Ø 1.5”/38
The multi connection fi ts onto suction casings with outlet diameter 25-35 mm. Cut
off a section at the right diameter (it’s marked in advance with: 25, 27, 29, 31, 33, 35 mm)
and push on to the multi connection over the tubing of integrated suction casings.
Connection sleeves 2114 or 2115 then fi t to the other end to link the hose.
148
11 Suction Hoses
Ø 2”/50 Ø 1.5”/38
Ø 2”/50 Ø 1.5”/38
Ø 1.5”/38
Ø 1.5”/38
6’/15’/2/5 m
6’/2 m
15’5 m 6’/2 m
6’/2 m15’5 m
Hose Sets
Standard suction hose, turnable
intermediate sleeve 2”/1.5”/50/38
Part No Description2125 Hose set 2”/1.5”/50/38 mm
L = 21’/7 m
2126 Hose set 2”/1.5”/50/38 mm
L = 15’ /5 m antistatic
2006 Hose set 1.5”/38 mm
L = 6’/2 m
2015 Hose set 1.5”/38
L = 6’/2 m
2105 Hose set 1.5”/38
L = 15’*/5 m*
Standard suction hose, turnable
intermediate sleeve 2”/1.5”/50/38
Antistatic suction hose, turnable
intermediate sleeve 2”/1.5”/50/38
Standard suction hose, turnable
intermediate sleeve 2”/1.5”/50/38
Connects to Ø 1.5”/38
suction casing
Connects to Ø 2”/50
suction hose
* Standard suction hose, turnable, non removable connector. (Replacement to standard hose kit.)
*Antistatic is defi ned as having a conductivity of < 106 ΩAntistatic certifi cation (ESD-rated) – please see our antistatic accessories from page 158 onwards. Tested according to Swedish National Testing and Research Institute (SP).** Static conductivity can be compromised by excessive hose wear.
Technical Data on Extaction Hose FittingsDescription Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion resistance UV and zone Resistance to Resistance to
(in/mm) Temp °C max/min resistance Welding Fume solvent and oil
Coupling socket 3”/2”/76/50 2008* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
2”/2”/50/50 2107* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
2”/1.5”/50/38 2108* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
3”/2”/76/50 (PU)** 2161* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
Coupling socket 3”/2”/76/50 2162* Blue NBR 248/-76/120/-60 Yes 2 3 3 2
Coupling socket 2”/2”/50/50 2129* Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/2”/50/50 (PU)** 2158* Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/1.5”/50/38 (PU)** 2157* Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/1.5”/50/38 2128* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.25”/38/32 2133* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.25”/1.25”/32/32 2171* Black PA12 284/-4/140/-20 Yes 1 2 3 1
Connecting sleeve 1.25”/1.5”/32/38 2132* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.5/38/38 (PU)** 2159* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.5/38/38 2114* Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/2”/50/50 2129* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1”/1”/25/25 2167* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.5/38/38 2115* Black PA12 284/-4/140/-20 Yes 1 2 3 1
Connecting sleeve 1”/1.5”/26/38 2109* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
1”/1.25”/26/32 2110* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
.7”/1.25”/17/32 2106* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
Connecting sleeve 1.25”/1.25”/32/32 2116 Grey PE 45/-45 No 1 2 3 1
1”/1”/25/25 2117 Grey PE 45/-45 No 1 2 3 1
Inter, sleeves 2”/1.5”/50/38 2131* Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/1.5”/50/38 (PU)** 2160* Black PA12 284/-4/140/-20 Yes 1 2 3 1
Inter, sleeves 3”/2”/76/50 2100* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
2”/1.5”/50/38 2120* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
1.5”/1.25”/38/32 2121* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
1.25”/1”/32/25 2101* Black EPDM 284/-76/140/-60 Yes 2 1 2 4
Hose connector 2”/50 2403 Grey PE 45/-45 No 2 2 3 3
1.5”/38 2118 Grey PE 45/-45 No 2 2 3 3
1.25”/32 2119 Grey PE 45/-45 No 2 2 3 3
Hose connector 2”/50 2170* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/38 2169* Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.25”/32 2168* Black PA12 284/-4/140/-20 Yes 1 2 3 1
Scale: 1 Excellent 2 Good
3 Limited 4 Poor
149
11
11
Suction Hoses
2048
72937294
7292
7358
7464
7399
About Cleaning AccessoriesFor the best results when cleaning, it is necessary to have the right equipment and to use it in the correct way. It is therefore a prerequisite that a variety of diff erent accessories are available for diff erent tasks. 1.25”/32 mm cleaning accessories are recommended when very light tools are required e.g.: offi ce cleaning. 1.5”/38 mm cleaning tools are ideal in most cases, they combine good capacity with ease of handling. Everything is available, from light tools such as wands in aluminium and tools in plastic and rubber to sturdy wear resistant wands in steel and cast aluminium fl oor tools. 2”/50 mm cleaning accessories are used for very heavy cleaning. Aluminium wands, large wheels on the fl oor tools and the ERGO-grip are several of the details which allow the accessories to be used easily despite their size. 3”/76 mm accessories are used for diff erent types of material transport.
Part No Description
2048 Hose set L=24’/8 m w hand pipe
7292 Suction brush 1.25”/32 mm
7293 Floor Tool 10.5/270 mm P-1.25”/32 mm
7294 Chromed Wand 1.25”/32 mm telescopic
7358 Suction brush 1.25”/32 mm
7399 Flat nozzle, 1.25”/32 mm
7464 Rectangle brush 1.25”/32 mm
TECHNICAL DATA
Qnom
90 cfm/150 m3/h
pnom
28 inwg/7 kPa
Cleaning Accessories Ø 1.25”/32 mm
150
11 Cleaning Accessories
70387047
7048 7049
7276 7291 73657264
7257 7258 7259
72607261
7035
72137376
7262
7235 72367321
73227323
7278
7275 7263
7297
7300
7374 7398
Cleaning Accessories Ø 1.5”/38 mm
* Antistatic. Please see our antistatic accessories from page 158 onwards.
Part No Description
7035 Chrome Steel hand pipe Ø 1.5”/38 mm, straight
7038 Suction Nozzle Ø 1.5”/38 mm
7047 Suction Brush B 8”/200 mm
7048 Pipe Nozzle RB 4”/100 mm
7049 Pipe Nozzle RB 8”/200 mm
7213 Chrome Steel Flat Nozzle Ø 1.5”/38 mm L= 16”/400 mm
7235* Cast Alu Floor Tool B 15”/370 mm Ø 1.5”/38 mm
7236* Cast Alu Floor Tool B 18”/450 Ø 1.5”/38 mm
7257* Chrome Steel Wand Ø 1.5”/38 mm
7258* SLightweight Alu Wand Ø 1.5”/38 mm
7259* Lightwieght Alu Wand Ø 1.5”/38 mm, with wear strip
7260 Chrome Steel Wand Extension Ø 1.5”/38 mm, L = 715 mm
7261* Alu Wand Extension Ø 1.5”/38 mm, L = 705 mm
7262 Chrome Steel hand pipe Ø 1.5”/38 mm curved
7263 Brush for 7275, 7278
7264* Tapered nozzle Ø 1.5”/38 mm
7275 Rubber part of suction brush Ø 1.5”/38 mm, 7278
7276* Tapered nozzle Ø 1.5”/38 mm
7278 Suction brush Ø 1.5”/38 mm
7291 Flat nozzle Ø 1.5”/38 mm L= 14”/350 mm plastic
7297* Crevice nozzle Ø 1.5”/38 mm, B= 8”/200 mm
7300 Rubber fl oor tool Ø 1.5” /38 mm
7320 Molded Plastic Floor Tool 12.5”/320 mm Ø 1.5”/38 mm,with rubber wiper
7321 Molded Plastic Floor Tool 12.5”/320 mm Ø 1.5”/38 mm, with brush
7322 Molded Plastic Floor Tool 12.5”/370 mm Ø 1.5”/38 mm, with rubber wiper
7323 Molded Plastic Floor Tool 12.5”/370 mm Ø, 1.5”/38 mm, with brush
7365* Flat nozzle Ø 1.5”/38 mm L= 14”/350 mm, Antitstatic
7374* Brush ESD for 7278E, 7279E
7376 Push-Pull Pistol
7398 Brush for 7278, 7279, hard, white
TECHNICAL DATA
Floor nozzle;
Light applications
Qnom
120 cfm/200 m3/h
pnom
20 inwg/5 kPa
Heavy applications
Qnom
150 cfm/250 m3/h
pnom
32 inwg/8 kPa
Hand Nozzle;
Qnom
150 cfm/250 m3/h
pnom
12 inwg/3 kPa
151
11
11
Cleaning Accessories
72667267
72687269
7377
7033
7295
7212
7271
7265
7285
7013
7277
7279
7238
7281
7016
7030
7307
7274
7263
7149
7374 73987147
Cleaning Accessories Ø 2”/50 mm
* Antistatic; Please see our antistatic accessories from page 158 onwards.
Part No Description
7013 Rubber part, fl oor tool Ø 2”/50 mm
7016 Suction nozzle with brush
7026 Saw blade
7030 Suction nozzle Ø 2”/50 mm
7033 Chrome Steel Hand pipe Ø 2”/50 mm
7147 Brush for 7016
7149 Chip nozzle D 50 W 70 L 243
7212 Chrome Stell Flat toolØ 2”/50 mm L=16”/400 mm
7238* Cast Alu Floor Tool B 20”/500 mm A--2”/50 mm
7263 Brush for 7274, 7279
7265 Chrome Steel Wand Ø 2”/50 mm
7266 Alu Lightweight Wand Ø 2”/50
7267 Alu Lightweight Wand Ø 2”/50 mm, wear st
7268 Chrome Steel Wand ext Ø 2”/50 mm, L = 710 mm
7269 Alu Wand Extension Ø 2”/50 mm, L = 685 mm
7271 Chrome Steel hand pipe Ø 2”/50 mm curved
7272 Tapered nozzle Ø 2”/50 mm
7274 Rubber part, suction brush Ø 2”/50 mm
7277* Tapered nozzle Ø 2”/50 mm
7279* Suction brush Ø 2”/50 mm
7281* Floor nozzle Ø 2”/ 50 mm B 8”/200 mm
7285 Handle ERGO-Grip
7295 Bulk nozzle Ø 2”/50 mm
7307 Gulper Floor Tool Alu
7374* Brush ESD for 7278E, 7279E
7377 Push Pull Pistol
7398 Brush for 7278, 7279, hard, white
ERGO-Grip for better handling, fi ts on all the 2”/50 mm wands and Bulk Nozzle 2”/50 mm.
TECHNICAL DATA
Floor nozzle;
Qnom
210 cfm/350 m3/h
pnom
32 inwg/8 kPa
Hand Nozzle;
Qnom
210 cfm/350 m3/h
pnom
12 inwg/3 kPa
152
11 Cleaning Accessories
71267162
7127
7129
7161
Cleaning Accessories Ø 3”/76 mm
Part No Description
7126 Clamp for scraper
7127 Scraper for suction lance
7129 Handle complete
7161 Bulk nozzle Ø 3”/76
7162 Suction lance Ø 3”/76
153
11
11
Cleaning Accessories
F
D
AB
C
E
E, D
A, B, C
H
D FMFS 5x12
A B
C
E
G
E, D
A, B, C
7115
7146
7046
7116
7108
I
J
Gulper Floor Tool Ø2”/50 mm, Alu
Molded Plastic Floor Tools Ø1.5”/38 mm
B = 12.6” /320 mm B = 14.6 ”/370 mm Set 7320 7321 7322 7323
A Rubber band B 316/288 (2 pcs) 7328 x – 7329 x –
B Front brush 7225 – x 7226 – x
C Rear brush 7326 – x 7327 – x
D Brush holder 7215 x x 7216 x x
E Brush holder 7324 x x 7325 x x
F Wheel, fl oor nozzle P 40455 x x 40455 x x
Cast Alu Floor Tools Ø1.5”/38 mm, Ø2”/50 mm
Ø 1.5”/38 mm Ø 2”/50 mm B = 14.6”/370 mm B = 17.7” /450 mm B = 19.7” /500 mm Set 7235 7236 7238
A Rubber band* (2 pcs) 7045 x 7014 x 7051 x
B Front brush 7222 – 7223 – 7224 –
C Rear brush 7225 – 7228 – 7227 –
D Brush holder 7216 x 7218 x 7219 x
E Brush holder 7215 x 7217 x 7218 x
F Cover 370 A 7242 x 7243 x 7244 x
G Wheel, fl oor nozzle A 7252 x 7252 x 7252 x
H Clampl 7239 x 7240 x 7241 x
I Adjusting screw 7253 x 7253 x 7253 x
J Coned connection, antistatic 7335 x 7335 x 7245 x
B = 15.7”/400 mm B = 17.7”/450 mmSet 7307
Rubber moulding (2 pcs) 7108 x
Brush B 450/420 7046 x
Brush holding moulding 7115 x
Brush holding moulding 7116 x
Wheel kit 7146 x
* Also by the metre, Part No 7058 (50 m)
Spare Parts for Floor Tools
x = standard- = can be changed
154
11 Cleaning Accessories
4149 7148
6098
7150
6005
6610
6616
Part No Description Connection (Ø) (in/mm)
4149 Suction nozzle 2”/50
6005 Universal nozzle 1.5”/38
6098 Tubular nozzle 1.5”/38
6610 Universal nozzle 1.5”/38
6616 Universal nozzle Ø 50 2”/50
7148 Funnel shaped nozzle Ø 50 2”/50
7150 Magnetic holder for 7148, 4149 2”/50
TECHNICAL DATA
Part No Qnom pnom
4149 150 cfm/250 m3/h 6.4inwg/1.6 kPa
6005 90 cfm/150 m3/h 6.4inwg/1.6 kPa
6098 90 cfm/150 m3/h 15.2 inwg/3.8 kPa
6010 90 cfm/150 m3/h 6.4inwg/1.6 kPa
6616 250 m3/h 6.4inwg/1.6 kPa
7148 150 cfm/250 m3/h 6.4inwg/1.6 kPa
9060 90 cfm/150 m3/h 10.8 inwg/2.7 kPa
Welding Accessories/Extraction Nozzles
155
11
11
Welding Accessories
Part No Description Volume/ Capacity Picture DC 1800* DC 2900a DC 3800a/i DC 5900a/i Comments Height
42278-70 Container 20 l/5 gal 40 kg/90 lbs X Is delivered complete with wheels
285 mm undercarriage and fasteners.
40070 Container 40 l/10.5 gal 60 kg/130 lbs X* X X –
402 mm
40409 Container with sight glass 40 l/10.5 gal 60 kg/130 lbs X* X X Steel container with sight glass and
402 mm knockout for drain tap.
40624 Container, stainless 40 l/10.5 gal 60 kg/130 lbs X* X X Stainless steel container for liquids.
402 mm
40412 Container with sight glass 60 l/15.5 gal 60 kg/130 lbs X* (X)** (X)** X Steel container with sight glass and
685 mm knockout for drain tap. The cyclone must
be raised to a higher mounting point with
the above kit.
42369 Basket for plastic bag X Ensures that the bag can’t get around the
fi lter when the machine is used for light
material.
4119 Drain tap 40/60 l X X X X The drain tap is mounted on the 40 l with
sight glass. R 1/2”
40410 Bottom screen 40/60 l X X X X For fl uid separation; The bottom screen is
installed in the bottom and the drain tap
is mounted on the container, 40/60 l.
40401 Carrying handles 40 l X X X X Heavy duty carrying handles are installed
in place of the standard locking hooks. For
40 l containers.
7313 Emptying car 40/60 l X X X X Emptying cart for easy handling of the
container.
42078 Lifter kit 60 l X When the 60 l container is to be used, the
cyclone must be raised on the
units chassis.
7368 Container 75 l/19.5 gal X
7249 Container with sight glass 90 l/23.5 gal 150 kg/330 lbs X The cyclone is mounted in the higher
700 mm mounting position and the bottom cone
is changed.
7314 Container with sight glass, 90 l/23.5 gal 150 kg/330 lbs X The cyclone is mounted in the higher
drain tap and bottom screen 700 mm mounting position and the bottom cone
is changed.
7248 Emptying cart 90 l X The cart for handling of the 90 l container
can also be handled with a fork lift. The
container is rotated for emptying.
42079 Bottom cone kit , 90 l, X When the 90 l container the cyclone must
incl extension hose be mounted at a higher position on the
chassis and the bottom cone changed.
7315 Crane hook 90 l X The crane hook is mounted securely on
the 90 l container. The container can be
rotated for emptying in the elevated
position.
Containers and Accessories Mobile Dust Extractors
* Max 90 lbs/40 kg when fi tted to a DC 1800** Fits to the cyclone but not to the standard chassis 156
11 Containers and Accessories
Description Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion UV and zone Resistance to Resistance to
(in/mm) Temp °C max/min resistance resistance Welding Fume solvent and oil
Suction hoses antistatic 3”/76 mm 2024E Black PE 113/–40/+45/–40 Yes 2 2 3 3
2”/50 mm 2013E Black PE 113/–40/+45/–40 Yes 2 2 3 3
1.5”/38 mm 2012E Black PE 113/–40/+45/–40 Yes 2 2 3 3
1.25”/32 mm 2005E Black PE 113/–40/+45/–40 Yes 2 2 3 3
1”/25 mm 2025E Black PE 113/–40/+45/–40 Yes 2 2 3 3
Scale: 1 Excellent
2 Good
3 Limited
4 Poor
Ø designates the inside of the hose
Technical Data on Suction Hoses, Antistatic
Suction hoses, antistatic, Ø (in/mm) Part No/m Standard length
3”/76 2024E 30’/10 m
2”/50 2013E 15’, 30’, 50’/5, 10, 15 m
1.5”/38 2012E 15’, 30’, 50’/5, 10, 15 m
1.25”/32 2005E 15’, 30’, 50’/5, 10, 15 m
1”/25 2025E 15’, 30’, 50’/5, 10, 15 m
Antistatic Accessories - ESD certifi cationAccessories with antistatic certifi cation (ESD) according to Swedish National Testing and Research Institute (SP). ESD-protected accessories prevent a risk of ignitionof explosive gases or powders, or of items such as fi reworks. Antistatic is defi ned as having g a conductivity of < 10 6 Ω.
Measured values to ground connection, should be less than 106 Ohm as stated by clause 11 in CENELEC TR 50404:2003, and the measured resistances should be less than 109 Ohm as stated according to sub-clause 7.4.3 a, in EN 60079-0:2009 and 4.2 in CENELEC TR 50404:2003.
• Better fl exibility.• Smoother on the inside for improved air fl ow • Th e conductivity is as good as the previous hose.• Longer life time.• Heat tolerance < 60 degree C
Suction Hoses, antistatic
Multi Connection for Integrated Suction CasingsPart No 42497
Part No Description
42497* Multi connection for intergrated suction casings
2114* Connecting sleeve, turnable 38/38
2115* Connecting sleeve 38/38
*Antistatic EPDM
42497E2114
2115Ø 1.5”/38
The multi connection fi ts onto suction casings with outlet diameter 25-35 mm. Cut
off a section at the right diameter (it’s marked in advance with: 25, 27, 29, 31, 33, 35 mm)
and push on to the multi connection over the tubing of integrated suction casings.
Connection sleeves 2114 or 2115 then fi t to the other end to link the hose.
157
11
11
Antistatic Accessories
X 2”/50
Ø 2”/50
2129E
2129E
X 1.5”/38
2114E
2133E
Ø 2”/50
Ø 2”/50
Ø 1.5”/38
Ø 1.25”/32
2131E Ø 1.5”/38
2129E
2114E
2132E
2114E
2132E
Ø 2”/50
Ø 1.5”/38
Ø 1.25”/32
Ø 1.5”/38
Ø 1.25”/32
2128E
Ø 1.25”/32
2171E
X 2”/50
Ø 3”/76
Ø 2”/50
X 1.5”/38
2008E
2107E
2108E
Ø 3”/76 2100E Ø 2”/50
Ø 2”/50 2170E Ø 2”/50 2120E Ø 1.5”/38
Ø 1.5”/38 2169E Ø 1.5”/38 2121E Ø 1.25”/32
Ø 1.25”/32 2168E Ø 1.25”/32 2101E Ø 1”/25 2167EØ 1”/25
2106E
2110E
Ø .7”/17
Ø 1”/26
2109E
2107E
Ø 1”/26
Ø 1.5”/38
Ø 2”/50
2115E
2115E
see above
Turnable Hose Connectors
Part No Description2008E Coupling socket 3”/2”/76/50 mm
2100E Intermediate sleeve 3”/2”/76/50 mm
2101E Intermediate sleeve 1.25/1”/32/25mm
2106E Connecting sleeve 7”/1.25”/17/32 mm
2107E* Coupling socket 2”/2”/50/50 mm
COUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE
Non-Turnable Hose Connectors
Part No Description2132E Connecting sleeve, turnable 1.25”/1.5/32/38 mm
2133E Coupling socket, turnable 1.5”/1.25”/38/32 mm
2171E Coupling socket, turnable 1.25”/1.25/32/32 mm
COUPLING SOCKET HOSE CONNECTOR CONNECTING SLEEVEINTERMEDIATE SLEEVE
Part No Description2114E Connecting sleeve, turnable 1.5”/1.5”/38/38 mm
2128E Coupling socket, turnable 2”/1.5”/50/38 mm
2129E Coupling socket, turnable 2”/2”/50/50 mm
2131E Intermediate sleeve, turnable 2”/1.5”/50/38 mm
Part No Description2108E Coupling socket 2”/1.5”/50/38 mm
2109E Connecting sleeve 1”/1.5”/26/38 mm
2110E Connecting sleeve 1”/1.25/26/32 mm
2115E* Connecting sleeve 1.5”/1.5”/38/38 mm
2120E Intermediate sleeve 2”/1.5”/50/38 mm
Part No Description2121E Intermediate sleeve 1.5/1.25/38/32 mm
2167E Connecting sleeve 1”/1”/25/25 mm
2168E Hose connector 1.25”/32 mm
2169E Hose connector 1.5”/38 mm
2170E Hose connector 2”/50 mm
158
11 Antistatic Accessories
Ø 2”/50
2158E
2158E
2157E
Ø 2”/50
Ø 2”/50
Ø 1.5”/38
2160E Ø 1.5”/38
Ø 2”/50
Ø 1.5”/38
Ø 1.5”/38
2158E
2159E
2159E
X 2” /50
Turnable Connectors for Suction Hose; PUCOUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE
Ø 3”/76
2161E
2162E
Ø 2”/50
Ø 2”/50
Non-Turnable Connectors for Suction Hose; PUPart No Description
2157* Coupling socket Ø 2”/1.5”/50/38 mm PU, turnable
2158* Coupling socket Ø 2”/2”/50/50 mm PU, turnable
2159* Connecting sleeve Ø 1.5”/1.5”/38/38 mm PU, turnable
2160* Intermediate sleeve Ø 2”/1.5”/50/38 mm PU, turnable
2161* Coupling socket Ø 3”/2”/76/50 mm, EPDM
2162* Coupling socket Ø 3”/2”/76/50 mm, Nitrilesee above
see above
Technical Data on Extaction Hose FittingsDescription Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion resistance UV and zone Resistance to Resistance to
(in/mm) Temp °C max/min resistance Welding Fume solvent and oil
Coupling socket 3”/2”/76/50 2008E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
2”/2”/50/50 2107E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
2”/1.5”/50/38 2108E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
3”/2”/76/50 (PU)** 2161E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
Coupling socket 3”/2”/76/50 2162E Blue NBR 248/-76/120/-60 Yes 2 3 3 2
Coupling socket 2”/2”/50/50 2129E Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/2”/50/50 (PU)** 2158E Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/1.5”/50/38 (PU)** 2157E Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/1.5”/50/38 2128E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.25”/38/32 2133E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.25”/1.25”/32/32 2171E Black PA12 284/-4/140/-20 Yes 1 2 3 1
Connecting sleeve 1.25”/1.5”/32/38 2132E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.5/38/38 (PU)** 2159E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.5/38/38 2114E Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/2”/50/50 2129E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1”/1”/25/25 2167E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/1.5/38/38 2115E Black PA12 284/-4/140/-20 Yes 1 2 3 1
Connecting sleeve 1”/1.5”/26/38 2109E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
1”/1.25”/26/32 2110E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
.7”/1.25”/17/32 2106E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
Inter, sleeves 2”/1.5”/50/38 2131E Black PA12 284/-4/140/-20 Yes 1 2 3 1
2”/1.5”/50/38 (PU)** 2160E Black PA12 284/-4/140/-20 Yes 1 2 3 1
Inter, sleeves 3”/2”/76/50 2100E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
2”/1.5”/50/38 2120E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
1.5”/1.25”/38/32 2121E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
1.25”/1”/32/25 2101E Black EPDM 284/-76/140/-60 Yes 2 1 2 4
Hose connector 2”/50 2170E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.5”/38 2169E Black PA12 284/-4/140/-20 Yes 1 2 3 1
1.25”/32 2168E Black PA12 284/-4/140/-20 Yes 1 2 3 1
Scale: 1 Excellent 2 Good
3 Limited 4 Poor 159
11
11
Antistatic Accessories
7276 7264 72357236
72777238
Cleaning Accessories Ø 1.5”/38 mm
Cleaning Accessories Ø 2”/50 mm
gg
7257 7258
7259
7261
All plastic sacks are manufactured in strong LD-polyethylene. Sacks are sold in packs of 50.
Plastic Sacks
7279
7281
72977365 7374
Part No Description
7235E Cast Alu Floor Tool B 15”/370 mm Ø 1.5”/38 mm
7236E Cast Alu Floor Tool B 18”/450 Ø 1.5”/38 mm
7257E Chrome Steel Wand Ø 1.5”/38 mm
7258E SLightweight Alu Wand Ø 1.5”/38 mm
7259E Lightwieght Alu Wand Ø 1.5”/38 mm, with wear strip
7261E Alu Wand Extension Ø 1.5”/38 mm, L = 705 mm
7276E Tapered nozzle Ø 1.5”/38 mm
7297E Crevice nozzle Ø 1.5”/38 mm, B= 8”/200 mm
7365E Flat nozzle Ø 1.5”/38 mm L= 14”/350 mm, Antitstatic
7374E Brush ESD for 7278E, 7279E
TECHNICAL DATA
Floor nozzle;
Light applications
Qnom
120 cfm/200 m3/h
pnom
20 inwg/5 kPa
Heavy applications
Qnom
150 cfm/250 m3/h
pnom
32 inwg/8 kPa
Hand Nozzle;
Qnom
150 cfm/250 m3/h
pnom
12 inwg/3 kPa
Part No Description
7238E Cast Alu Floor Tool B 20”/500 mm A--2”/50 mm
7277E Tapered nozzle Ø 2”/50 mm
7279E Suction brush Ø 2”/50 mm
7281E Floor nozzle Ø 2”/ 50 mm B 8”/200 mm
TECHNICAL DATA
Floor nozzle;
Qnom
210 cfm/350 m3/h
pnom
32 inwg/8 kPa
Hand Nozzle;
Qnom
210 cfm/350 m3/h
pnom
12 inwg/3 kPa
Plastic sacks, model Antistatic Volume (gal/litre) Size (in/mm)
Single-phase dust extractors
DC 2800 H Asbestos 42384 5 gal/20 l 14” x 27.5”/360 x 700 mm
Stationary dust extractors
S 11000 42111 23 gal/90 l 27.5” x 33.5”/700 x 850 mm/ 27.5” x 43.3”/700 x1100 mm
S 21000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
S 32000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
S 34000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
S 34000X 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
Pre-separators
DCF Mobil 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
F 20000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
F 30000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
Bag strap, Part No 4313, 1 m, Part No 4613, 1.5 m.
* Sacks are sold in packs of 10160
11 Antistatic Accessories
70487049 7047
FDA Certifi ed
Cleaning Accessories for the Food Processing Industry
*/ ESD < 108 Ω rubber house FDA certified**/ FDA except milk & edible oils
Part No Description
7016-01 Suction brush soft complete 70/50 mm (2.8”/2”)
7017-01 Suction brush soft complete 70/50 mm (2.8”/2”), red
7018-01 Suction brush soft complete 70/50 mm (2.8”/2”), green
703301 Hand pipe straight stainless steel 50 mm (2”)
703501 Hand pipe straight stainless steel 38 mm (1.5”)
7047 Suction brush B 200 mm (8”)
7048 Pipe nozzle RB 100 mm (4”)
7049 Pipe nozzle RB 200 mm (8”)
7262-01 Hand pipe bent stainless steel 38 mm (1.5”)
7264-01 Tapered nozzle 38 mm (1.5”)
7271-01 Hand pipe bent stainless steel 50 mm (2”)
7272-01 Tapered nozzle 50 mm (2”)
727401 Suction brush coarse complete 70/50 mm (2.8”/2”)
727402 Suction brush coarse complete 70/50 mm (2.8”/2”), red
727403 Suction brush coarse complete 70/50 mm (2.8”/2”), green
727501 Suction brush coarse complete 70/38 mm (2.8”/1.5”)
727502 Suction brush coarse complete 70/38 mm (2.8”/1.5”), red
727503 Suction brush coarse complete 70/38 mm (2.8”/1.5”), green
7292-01 Suction brush soft complete 70/38 mm (2.8”/1.5”)
7293-01 Suction brush soft complete 70/38 mm (2.8”/1.5”), red
7294-01 Suction brush soft complete 70/38 mm (2.8”/1.5”), green
7292-017293-017294-01
7016-017017-017018-01
727501727502727503
727401727402727403
7262-01
7271-01
703501 703301
7264-01
7272-01
ESD */and FDA **/ certifi ed ESD */ certifi edFor companies operating with a color-coded concept to maintain high hygiene standards we can provide our brushes in three diff erent makes: black (no mark), red marked and green marked.
Th e food processing industry places special demands on the design of machines and accessories. Th ey have both to maintain high hygiene standards and to minimize the risk of dust explosions (e.g. fl our).
Our assortment is unique because we provide both ESD approved (antistatic) and FDA certifi ed accessories. By combining these new accessories with our wide range of dust extractors we can off er our customers within the food processing industry a complete and excellent solution.
161
11
11
Antistatic Accessories
Th e suction casing is the key to an eff ective source extraction system, it must be light weight and well designed while at the same time effi cient at capturing the dust. Dustcontrol’s suction case kits include a variety of clamping rings and spacers to give you fl exibility when fi tting to diff erent hand power tools.
TECHNICAL DATA Con. Q nom
p nom
Small hand-held tools ø1.25”/32 mm 90 cfm/150 m3/h 14 inwg/3.5 kPa
Hand-held tools ø1.5”/38 mm 120 cfm/200 m3/h 14 inwg/3.5 kPa
Large hand-held tools e.g. 9”
depressed centre disc ø1.5”/38 mm 150 cfm /250 m3/h 20 inwg/5.0 kPa
Capture dust at the source.
162
11 Suction Casings
1 2 3
Measure the diameter of the disc. Measure the diameter of the mounting collar on the machine - ØD
and the height of the machine - H.
Suction Casing Kit for Depressed Center Wheels, Abrasive Discs and Diamond Discs (N,K):
Connection Ø
Note: The disc has tobe thinner than 18 mm.
Model Size of the disc H (in/mm) Hose connection, Ø (in/mm) Part No
Atlas Copco GTG 40 FO66-23 9’’ 1.6”/41 1.5”/38 6805*
Georges Renault KL 365 9’’ 2.3/59 1.5”/38 6388*
Model specifi c suction casings
*With the clamping rings welded on the suction casings.* *Some Hitachi machines have a Ø1.6 /40 mm conical neck. With these it is necessary to buy an aluminium ring (Part No 6270). When mounted on the machine this aluminium ring enlarges the ØD of the machine to 2”/50 mm – therefore choose suction casing package 5’’ – Part No 6678.
Disc Diameter Ø D (in/mm) H (in/mm) Hose connection, Ø (in/mm) Part No
4 ½’’ (115 mm) 1.6”–1.9”/40–49 1.2”–1.8”/31–46 1.25”/32 6676
5’’ (125 mm) 1.6”–1.8”/40–45 1.2”–1.8”/31–46 1.25”/32 6677**
5’’ (125 mm) 1.8”–2.1”/46–53 1.2”–1.8”/31–46 1.25”/32 6678
7’’ (175 mm) 2.4”–2.6” & 2.9”–3”/62–65 & 74–77 1.2”–2”/31–51 1.5”/38 6679
9’’* 4.4”/112 1.5”/37 1.5”/38 6221*
9’’ 2.7”/68 2”/51 1.5”/38 6202*
9’’ 2.9”/74 2.1”/54 1.5”/38 6302*
9’’ 2.9”/74 1.5”/37 1.5”/38 6349*
9’’ 2”/50 1.9”/47 1.5”/38 6500*
9’’ 2.4”/62 2.1”/54 1.5”/38 6416*
9’’ 2.4”/62 2”/50 1.5”/38 6438*
9’’ 2.4”/62 1.9”/48 1.5”/38 6555*
9’’ 2.6”/65 1.6”/40 1.5”/38 6842*
9’’ 2.5”/64 2”/52 1.5”/38 6427*
2.3”/58 2.1”/54 1.5”/38 6537*
163
11
11
Suction Casings
1 2 3
Suction Casing Kit for Diamond Cup Wheels (D):
Measure the diameter of the disc. Measure the diameter of the mounting collar on the machine - ØD
and the height of the machine - H.
Disc Diameter Ø D (in/mm) H (in/mm) Hose connection, Ø (in/mm) Part No
4 ½’’ (115 mm) 1.6”–1.9”/40–49 1.9”–2.1”/49–54 1.25”/32 6681
5’’ (125 mm) 1.6”–1.9”/40–49 1.9”–2.8”/49–70 1.25”/32 6682
5’’ (125 mm) 2”/50 1.5”–2.4”/38–61 1.25”/32 6673
7’’ (175 mm) 2.1”–2.4”/54–61 2.5”–2.8”/63–72 1.5”/38 6683
7’’ (175 mm) 2.4”–2.6” & 2.9”–3” / 62–65 & 74–77 2.5”–3.4”/63–86 1.5”/38 6684
164
11 Suction Casings
1 2
3
Suction Casing Kit for Sanding Discs (F):
Disc Diameter Ø D (in/mm) H (in/mm) Part No Connection Ø (in/mm)
1½–3’’ (38–75 mm) 1.1”/27 * 6833* 1.25”/32
4’’ (100 mm) 1.6”–1.9”/40–49 1.5”–1.7”/39–44 6670 1.25”/32
4 ½’’ (115 mm) 1.6”–1.9”/40–49 1.5”–1.9”/39–48 6671 1.25”/32
5’’ (125 mm) 1.6”–1.9”/40–49 1.5”–1.9”/39–48 6672 1.25”/32
5’’ (125 mm) 2”/50 1.5”–2.1”/38–61 6673 1.25”/32
7’’ (175 mm) 2.1”–2.4”/54–61 2”–2.3”/50–59 6674 1.5”/38
7’’ (175 mm) 2.4”–2.6” & 2.9”–3”/62–65 & 74–77 2”–2.9”/50–73 6675 1.5”/38
* Some Hitachi machines have a Ø1.6”/40 mm conical neck. With these it is necessary to buy an aluminium ring (Part No 6270). When mounted on the machine this aluminium ring enlarges the ØD of the machine to 2”/50 mm – therefore choose suction casing package 5’’ N, K – Part No 6678.
Measure the diameter of the disc. Measure the diameter of the mounting collar on the machine - ØD
and the height of the machine - H.
1 23
Measure the diameter of the cup. Measure the diameter of the mounting collar on the machine - ØD
and the height of the machine - H.
Suction Casing Kit for Abrasive Cup Stone (S):
Cup Diameter Ø D (in/mm) H (in/mm) Connection, Ø (in/mm) Part No
5’’ (125 mm) 2”–3”/50–77 1.8”–3.2”/46–81 1.5”/38 6680
Model specifi c suction casings
Model Size of the disc Connection, Ø (in/mm) Part No
Bosch 6” (150 mm) 1.5”/38 6023
Atlas Copco GTG 40 S060 6” (150 mm) 1.5”/38 6353
165
11
11
Suction Casings
6621
6001
7033
6622
6077 6078
Hammer Drills, Chisels and Breakers
Part No 6622 is perfect for small chisel hammers – and hammer drills.Part No 6077 is perfect for small chisel hammers.
Bellow to Part No 6078, 6622 and 6621
Tool connection Ø D (in/mm) Hose connection (in/mm) Height (in/mm) Part No
2.4”/61 1.5”/38 7”/178 6078
1.9”/48 1.5”/38 6.2”/158 6621
1.7”/43 1.5”/38 6.2”/158 6622
1.25”/32 1.25”/32 4.4”/112 6077
– 2”/50 3.9”/100 6001
Bellow to part no 6078, 6621, 6622 6130
Suction casings B, H, M, L
Model Hose connection Ø D (in/mm) Part No
Atlas Copco RRD 37/RRD 57 1.5”/38 6229
Atlas Copco BBD 11/RRC73 1.5”/38 6152
Model specifi c suction casingsNote: For longer points or hammer drill bits, use two or more bellows, Part No 6130. These will slip on to each other.
6130
166
11 Suction Casings
Please refer to the back page of this catalogue to fi nd the telephone, fax number or e-mail address for your local Dustcontrol rep.It is important that measurements should be taken as accurately as possible to avoid incorrect selections, e.g. with a Vernier Caliper.
Message to: ......................................................
From : .............................................................
Th is message contains .............. page (s) in total
Machine Model Type
D d H h A B M
DDiamond Cup Grinding Disc
N, K.Depressed Center Disc, Abrasive
discs or Diamond Cup Wheels
SAbrasive Cup Stone
FSanding Disc
Information Fax Back FormIn this catalogue, we have included suction casings for the most common power tool types and manufacturers. If you do not fi nd the suction casings here for your tool, send us the dimensions according to the table (diagram) below or call your local representative.
Reciprocating Saw
LEGEND
F Sanding disc D Diamond Cup Wheel N Depressed Centre disc K Abrasive disc, Diamond Cup wheel S Abrasive Cup stonel
Hose connection (in/mm) Part No Machine model
1.25”/32 6290 Atlas Copco SSE 1000 X/SQ/, Milwaukee 65xx-xx (Sawzall)
Suction casings C
Hose connection (in/mm) Part No Machine model
1.25”/32 6269 Milwaukee 6378
Circular Saw
167
11
11
Suction Casings
D1
H
H
H
H
H
D2D1
D2
D1
D2
D1
D2
D1
D2
Description Dimension Part no
D1 D
2 H
in/mm in/mm in/mm
Plastic ring for 5S 4.8”/121 5.5”/139 2”/50 6003saucer grinder 6S 5.8”/147 6.5”/164 2”/50 6004
1 ½ F 1.5”/39 2.3”/59 .9”/23 6314 2 F 1.5”/39 2.7”/69 .9”/23 6313 3 F 1.5”/39 3.7”/95 1” /25 6312Rubber collar for 4 F 2.8”/72 4.6”/117 .5”/13 6182fi bre disc (F) 4 ½ F 2.8”/72 5.3”/135 .5”/13 6181 4 ½ F 2.8”/72 5.3”/135 .9”/23 618100 5 F 2.8”/72 5.7”/145 .5”/13 6195
Rubber collar for 5 F 3.8”/96 5.9”/150 .6”/15 6006fi bre disc (F)
Rubber collar for 5 O 2.8”/72 5.7”/145 1.5”/38 6212osc. sanding 6 O 3.8”/96 6.7”/170 1.1”/28 6180machine
Rubber collar for 7 F 4.4”/112 7.7”/196 .7”/19 6002fi bre disc (F) 7 F 4.4”/112 7.7”/196 1.4”/35 6034 8 F 4.4”/112 8.7”/221 1.6”/41 6211 9 F 4.5”/113 10”/250 1.25”32 6039
Suction Casing, consumable parts
168
11 Suction Casings
169
11
11
Suction Casings
Customized Suction CasingsDustcontrol can customize the suction casing to suit the production process.
Robot deburring for telecom parts.
Suction casing mounted on slitter knife in printing press.
Suction casing mounted on slitter knife in printing press. Suction casing mounted on slitter knife in printing press.
Food packaging industry.
170
11 Suction Casings
Conical pleated fi lter with sealing fl ange.
Cylindrical pleated fi lter with bayonet mounting.
Conical pleated fi lter with sealing fl ange and a fi lter-protective jacket. The HEPA fi lter is mounted inside the fi ne fi lter.
FiltersCellulose Fine FilterGood quality standard fi lter with high fi ltration effi ciency. Epoxy treated for resistance to humidity and other elements.
Polyester Fine FilterHigh quality fi lter material with exceptional resistance to most elements. Particularly suitable to high humidity applications such as machine and tool shops where cutting and cooling fl uids are used. Filter can be washed.
HEPA FilterTh e HEPA fi lter is made of fi breglass material with a support layer of cellulose. Filtration effi ciency is 99.995% EN 60335. Note: When changing fi lters the gasket of the fi lter holder has to be checked and cleaned.Leakage is not permitted in Asbestos applications.
In applications requiring special fi lter materials, standard fi lter confi gurations can be ordered with alternative materials.
DC 1800, DC 2900
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C)
42029 Fine fi lter Pleated around support cyl. Cellulose, epoxy treated 16.2/1.5 IEC EN 60335-2-69 Part 1 176/80
42029ST Fine fi lter, 48 pcs Cellulose
42028 Fine fi lter Pleated Polyester 16.2/1.5 IEC EN 60335-2-69 Part 1 266/130
42027 HEPA H13 fi lter Pleated Cellulose, fi breglass 7.5/0.7 HEPA H13 176/80
DC 3800a, DC 3800c, DC 3800c Turbo, DC 3800 Turbo EX , DC 3800c Twin, DC 3800 TR S, DC 3800i, DC 3800 Stationary
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C)
42026 Fine fi lter Pleated around support cyl. Cellulose, epoxy treated 26.9/2.5 IEC EN 60335-2-69 Part 1 176/80
42026ST Fine fi lter, 24 pcs Cellulose
42025 Fine fi lter Pleated around support cyl. Polyester 26.9/2.5 IEC EN 60335-2-69 Part 1 266/130
42025ST Fine fi lter, 24 pcs Polyester
4202501 Fine fi lter Pleated around support cyl. Polyester 26.9/2.5 IEC EN 60335-2-69 Part 1 176/80
42465 Fine fi lter PTFE Pleated around support cyl. Polyester PTFE 26.9/2.5 IEC EN 60335-2-69 Part 1 266/130
42024 HEPA H13 fi lter Pleated Cellulose, fi breglass 15.1/1.40 HEPA H13 176/80
42398 Fine fi lter Pleated around support cyl. Polyester 26.9/2.5 IEC EN 60335-2-69 Part 1 266/130
DC 5900a/c 5 kW, DC 5800a/c 9.2 kW S /P, DC 5900a/c PTFE, DC 5800i, DC 5800 TR, S 11000, S 21000, S 32000, S 34000, DC 11-Module
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C)
429203 Fine fi lter PTFE Pleated around support cyl. Polyester PTFE 53.8/5.0 IEC EN 60335-2-69 Part 1 266/130
429204 Fine fi lter Pleated around support cyl Polyester 53.8/5.0 IEC EN 60335-2-69 Part 1 266/130
4292 Fine fi lter Pleated around support cyl. Polyester 90.4/8.4 IEC EN 60335-2-69 Part 1 266/130
4422 HEPA H13 fi lter, TR (installed under top cover) Pleated around support cyl. Cellulose, fi breglass 25.0/2.32 HEPA H13 176/80
4284 Fine fi lter S 34000X Pleated around support cyl. Polyester 129.6/12 IEC EN 60335-2-69 Part 1 266/130
428402 Fine fi lter antistatic S 34000 Pleated around support cyl. Polyester 129.6/12 IEC EN 60335-2-69 Part 1 266/130
429206 Fine fi lter antistatic Pleated around support cyl. Polyester 90.4/8.4 IEC EN 60335-2-69 Part 1 266/130
42807 HEPA H13 fi lter Pleated around support cyl. Cellulose, fi breglass 40.0/3.72 HEPA H13 176/80
42869 HEPA H13 fi lter Pleated around support cyl. Cellulose, fi breglass 29.5/2.74 HEPA H13 176/80
Air Cleaners: DC AirCube 2000/DC AirCube 500
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C)
42619 Pre-fi lter Carpet Polyester 6.5/0.6 G4 122/50
42690 Pre-fi lter Pleated Carpet Polyester 1.9/0.18 G3 176/80
42692 HEPA H13 fi lter Pleated Cellulose, fi breglass 49.1/4.56 HEPA H13 176/80
42896 HEPA H13 fi lter Pleated around support Cellulose, fi breglass 101.4/9.42 HEPA H13 122/50
171
11
11
Consumables
42029 42028 42027 42026 42025 42024 4292 4889 404901 4133 408801 408803 4916
Filters for Earlier models
DC 2500i, DC 2500, DC 2500 Twin
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C
4889 Fine fi lter cylindric Pleated Polyester 15.1/1.4 IEC EN 60335-2-69 Part 1 266/130
404901 Fine fi lter cylindric Pleated around support cyl. Cellulosa 16.2/1.5 IEC EN 60335-2-69 Part 1 158/70
4821 HEPA H13 fi lter Pleated Cellulose, fi breglass 16.2/1.5 HEPA H13 158/70
4133 HEPA H13 fi lter (installed in the fi ne fi lter) Pleated around support cyl. Cellulose, fi breglass 5.4/0.5 HEPA H13 176/80
DC 2700c, DC 2700i From serial number 2527595, the DC 2700c and the DC 2700i can be equipped with a separate HEPA-fi lter (Part No. 42027). Older models shall be equipped with a single HEPA combifi lter., DC 2800a/c, DC 2800c RentalPart No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C
42029 Fine fi lter Pleated around support cyl. Cellulose, epoxy treated 16.2/1.5 IEC EN 60335-2-69 Part 1 176/80
42029ST Fine fi lter, 48 pcs Cellulose
42028 Fine fi lter Pleated Polyester 16.2/1.5 IEC EN 60335-2-69 Part 1 266/130
DC 3500, DC 3500 TR, DC 3500 Stationary, DC 5500, DC 5500i
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C
408801 Fine fi lter conic Pleated Polyester 16.2/1.5 IEC EN 60335-2-69 Part 1 266/130
408803 Fine fi lter Pleated Cellulose 16.2/1.5 IEC EN 60335-2-69 Part 1 176/80
4821 HEPA H13 fi lter, DC 3500 TR Pleated Cellulose, fi breglass 16.2/1.5 HEPA H13 158/70
4366 HEPA H13 fi lter, DC 3500 (installed on exhaust) Pleated around support cyl. Cellulose, fi breglass 15.1/1.4 HEPA H13 176/80
4422 HEPA H13 fi lter, DC 5500 5 kW (installed under top cover) Pleated around support cyl. Cellulose, fi breglass 24.8/2.3 HEPA H13 176/80
DC 3500i, DC 5700c, DC 5800 a/c 5 kW, DC 5800 a/c PTFE
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C
4916 Fine fi lter conic Pleated Polyester 16.2/1.5 IEC EN 60335-2-69 Part 1 266/130
4917 Combi-fi lter DC 3500i (Fine fi lter + HEPA H13 fi lter) Pleated Cellulose, fi breglass 16.2/1.5 HEPA H13 176/80
4422 HEPA H13 fi lter DC 5700 5 kW (installed under top cover) Pleated around support cyl. Cellulosa, fi breglass 24.8/2.3 HEPA H13 176/80
DC 3700c
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C
42026 Fine fi lter Pleated around support cyl. Cellulose, epoxy treated 26.9/2.5 IEC EN 60335-2-69 Part 1 176/80
42025 Fine fi lter Pleated Polyester 26.9/2.5 IEC EN 60335-2-69 Part 1 266/130
Air Cleaners DC 380/DC 1500/DC AirCube/DC AirCube Rental/DC AirCube X2
Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C
4080 Pre-fi lter, DC 380 Carpet, single ply Polyester 1.08/0.1 G4 212/100
4669 Pre-fi lter, DC 1500 Carpet, single ply Polyester 3.2/0.3 IEC EN 60335-2-69 Part 1 212/100
4079 Combi-fi lter (Fine fi lter + HEPA H13 fi lter), DC 380 Cartridge, pleated Fibreglass 50.9/4.7 HEPA H13 248/120
42136 Combi-fi lter (Fine fi lter + HEPA H13 fi lter) Cartridge, pleated Cellulose, fi breglass 56.1/5.2 HEPA H13 176/80
4667 Combi-fi lter (Fine fi lter + HEPA H13 fi lter), DC 1500 Cartridge, pleated Fibreglass 171.7/15.9 HEPA H13 248/120
Some of our most common fi lters
172
11 Consumables
All plastic sacks are manufactured in strong LD-polyethylene.
Plastic Sacks
Plastic sacks, model Standard Antistatic/ESD Volume (gal/litre) Size (in/mm)
Single-phase dust extractors
DC 1800 42291*/ 4 gal/15 l 21.7” x 21.7”/550 x 550 mm
DC 2900c 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm
DC 2800 H Asbestos 42285 42384 5 gal/20 l 14” x 27.5”/360 x 700 mm
DC 3800c 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DC 3800c Twin 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
Three-phase dust extractors
DC 3800c Turbo 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DC 3800c Twin Turbo 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DC 5900c 46145 Intellibag*/ 15.5 gal/60 l 25.2 x 39.4/640 x 1000 mm
Compressed air dust extractors
DC 3800 TR S 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DC 5800 TR 46145 Intellibag*/ 15.5 gal/60 l 25.2 x 39.4/640 x 1000 mm
Stationary dust extractors
S 11000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
S 21000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
S 32000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
S 34000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
S 34000X 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
DC 3800 Stationary 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DC 11-Module 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
Pre-separators
DCF 2800 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm
DCF 2500 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm
DCF 3500 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DCF Mobil 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
F 8000 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
F 11000 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
F 20000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
F 30000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
Old dust extractors
DC 2500 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm
DC 2500 Twin 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DC 2700c 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm
DC 2800c 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm
DC 2800c Rental 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm
DC 3500 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm
DC 5500 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
DC 5800c 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
DC 11000 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm
Bag strap, Part No 4313, 1 m, Part No 4613, 1.5 m.
*/ Sacks are sold in packs of 10
**/ Sacks are sold in packs of 50173
11
11
Consumables
Recommended