Hongfa Europe GmbH1 New products at HF R.Adelberg 2009

Hongfa Europe GmbH

1

New products at HF

R.Adelberg 2009

Hongfa Europe GmbH

2

A. Signal relays1. HFD42. HFD31

B. Power relays1. HF3FA2. HF152F – double pin3. HF7FD – double pin4. HF32FA-G5. HF46FA-G6. HF49FD7. HF115FD8. HF115FP9. HF118F reflow10. HF118F 13611. HF14FW 13612. HF18FA

C. Safety relays1. HFA22. HFA43. HFA6

D. Latching relays1. HFE202. HFE23

E. SSR1. HFS32 SSR

Hongfa Europe GmbH

3

1. HFD4 Samples & Serie now SMD samples June 2009 Axicom IM Omron G6K PANASONIC AGQ

SMT = sureface mounting technology

(reflow soldering)

DIP = DIP terminations ( wave soldering)

Hongfa Europe GmbH

4

HFD4

Hongfa Europe GmbH

5

HFD4

FCC part 68 = Federal Communications Commission part 68:

This rules are to avoid any dangerous situation based on electrical hazards.

For the relays means this - surge withstand voltage :

10 x 160µs means = 10µs is the slew rate (Anstiegssteilheit) and

160µs is the duration time

Hongfa Europe GmbH

6

HFD4

Hongfa Europe GmbH

7

HFD4

Hongfa Europe GmbH

8

HFD4 Typ. application

• Communications equipment

Linecard application – analog.ISDN , xDSL

Voice over IP

• Office and business equipment

• Measurment and control equipment

• Consumer electronics

• Medical equipment

Hongfa Europe GmbH

9

2. HFD31 Samples & Serie since July 09 Panasonic TQ2 Fujitsu A Serie Zettler AZ850/851 Omron G6H, TYCO FP2

Hongfa Europe GmbH

10

HFD31

Hongfa Europe GmbH

11

HFD31

Hongfa Europe GmbH

12

HFD31

Hongfa Europe GmbH

13

HFD31 Typ. application

• Communications equipment

Linecard application – analog.ISDN , xDSL

Voice over IP

• Office and business equipment

• Measurment and control equipment

• Consumer electronics

• Medical equipment

Hongfa Europe GmbH

14

3. HF3FA• samples and series since last year

• VDE and cULus approved

• to replace HF3FD

• GWFI / GWIT / GWT acc. EN60335/VDE0700

Hongfa Europe GmbH

15

Hongfa Europe GmbH

16

Lay-out HF3FA

Hongfa Europe GmbH

17

Comparision between HF3FA and HF3FD

HF3FA – HF3FD

Hongfa Europe GmbH

18

HF3FA typ. applications

- white goods- door opener- coffee maker - motion sensor- water boiler- etc.

Hongfa Europe GmbH

19

4. HF152F double pin version• sometime it is to hot at 16A 250VAC +105°C

• to avoid heating problems on the pcb

• Hongfa is the first supplier which can offer this kind of pinning

• VDE and UL approved

• samples and serie since September 2008

Standard pinning double pinning

Hongfa Europe GmbH

20

HF15F-T Doppelpin Typenbezeichnung

Hongfa Europe GmbH

21

Lay-out HF152F Doppelpin version

Hongfa Europe GmbH

22

HF152F Doppelpin version

Temp.rise comparison test single and double pin version at: 16A 105°C after 2hours:

Movable spring pin Stat.spring pin

HF152F-T

Single pin version

20K 28K

HF152F-T

Double pin version

15K 20K

Result: the temp.rise is much lower than with single pin!!

Hongfa Europe GmbH

23

HF152F Doppelpin version typ. applications:

• white goods

refrigerator compressor relay

washer heating relay

oven heating zone relay

• light and building controls

actor

proximity switch (Näherungsschalter)

door opener

etc.

Hongfa Europe GmbH

24

5. HF7FD double pin version• to avoid heating problems on the pcb

• more safety for the soldering connection relay - pcb

• Hongfa is the first supplier which can offer this kind of pinning

• VDE and UL approved

• samples and serie since Juni 2009

HF7FD double pin is approved at VDE with:

12A / 250VAC +70°C 100k cycles !

Hongfa Europe GmbH

25

F7FD double pin version

Hongfa Europe GmbH

26

Lay-out HF7FD Doppelpin version

Hongfa Europe GmbH

27

HF7FD doublelpin version typ. applications:

• white goods

refrigerator compressor relay

washer heating relay

oven heating zone relay

• light and building controls

actor

proximity switch (Näherungsschalter)

door opener

etc.

Hongfa Europe GmbH

28

6. HF32FA-G Samples and serie since November 2008 VDE approved UL expected September 2009

Ambient temperature: -40-+85°C

Out line dimensions: 17,6 x 10,1 x 12,3 mm

Coil power: 200mW 1 NO

Dielectric strength

Coil-contact : 5000VAC

Switching power :2500VA

Contact material: AgSnO

Hongfa Europe GmbH

29

Cross reference

Electrical endurance

TAKAMISAWA : JV

OEG : OJ /OJE – keine 10A

P&B : T77 – keine 10A

- 10A 250VAC resistive load roomtemperature: 70k cycles

- 1000W lamp load roomtemperature : 30k cycles

- TV5 rating acc UL

- B300 / R300 acc.UL

Hongfa Europe GmbH

30

HF32FA-G is always with AgSnO contact material – no other contact material is available !

Hongfa Europe GmbH

31

Hongfa Europe GmbH

32

HF32FD-G typ. applications:

• PLC (programmable logic controller - SPS speicherprogrammierbare Steuerung)

out-put cards

• light and building controls

lighting for warning and information signs

shutter motor relay

door opener

etc.

Hongfa Europe GmbH

33

7. HF46F / HF46F-G Samples and serie since November 2008 VDE and CUR approved Replacement type for HF43F OMRON G5NB

Panasonic LD

Hongfa Europe GmbH

34

Hongfa Europe GmbH

35

Hongfa Europe GmbH

36

Safety approval

HF46F HF46F-G

Hongfa Europe GmbH

37

HF46F/46-G with 2 kings of different pinnings:

Panasonic LD / OMRON G5NB and Tyco PCJ

Hongfa Europe GmbH

38

HF46F/46-G with 2 kings of different pinnings:

OMRON G5T

Hongfa Europe GmbH

39

HF46F/46F-G typ. applications:

• white goods

washer door locking / inside light

• light and building controls

lighting for warning and information signs

shutter motor relay

door opener

• industry control systems

etc.

Hongfa Europe GmbH

40

Comparison between HF43F – HF46F

HF43F – HF46F

Hongfa Europe GmbH

41

8. HF49FD

Features:

Both single contact version and bifurcated contact version are available

Max. switching capability of contact: 5A

Dielectric strength between contact and coil: 3kV

High sensitive coil: 0.12W

Two versions of terminal placement, compatible for both HF49F and HF49FA

Socket available

Environmental friendly products, compliant to RoHS

Cross Reference: Panasonic PA, OMRON G6DS, OEG PCN

(20.0×5.0×12.5) mm

Hongfa Europe GmbH

42

Contact pin distance:

5,08 = PANASONIC PA or

OMRON G6DS

7,62 = TYCO PCN

Hongfa Europe GmbH

43

HF49FD pcb lay-out

HF49FHF49FA

Hongfa Europe GmbH

44

9. HF115FD – low cost HF115F Samples and serie since November 2008 VDE and CUR approved No sealed version AgSnO and AgNi contact material available

Hongfa Europe GmbH

45

5. HF115FD – low cost HF115F

Hongfa Europe GmbH

46

Comparison HF115FD – HF115F

HF115FD – HF115F

Hongfa Europe GmbH

47

10. HF115FP – with LED and manual tab

Samples and serie since November 2008 VDE and CUR approved No sealed version AgSnO and AgNi contact material available Suitable for pcb or DIN rail sockets

Hongfa Europe GmbH

48

Hongfa Europe GmbH

49

HF115FP advantage Manual tab with slot for metall retainer – tab is useable on the pcb socket too DC version with LED and protection diode (bipolare LED – means connection direction

is arbitrary) AC version with LED For pcb- and DIN rail sockets

Hongfa Europe GmbH

50

HF115FP advantage Manual tab with slot for metall retainer – tab is useable on the pcb socket too

Hongfa Europe GmbH

51

HF115FP typ. applications:

• switch cabinets

I/O moduls

• light and building controls

lighting for warning and information signs

shutter motor relay

door opener

• industry control systems

etc.

Hongfa Europe GmbH

52

11. HF118F (253) reflow version (THT)

Samples and serie since December 2008 VDE and CUR No sealed version AgSnO and AgNi contact material available Packaging real and tape available 8A 250VAC +85°C 50k cycles

Hongfa Europe GmbH

53

HF118F (253) reflow version

Hongfa Europe GmbH

54

HF118F (253) reflow version Packaging real and tape available

Hongfa Europe GmbH

55

HF118F (253) reflow version

Pre heating phase

Hongfa Europe GmbH

56

HF118F (253) reflow version

Advantage: only reflow soldering process – save time and money

Disadvantage: Relay is more expensive

Hongfa Europe GmbH

57

13. HF118F (136) low cost version

Samples and serie since December 2008 VDE and CUR pending No sealed version AgSnO and AgNi contact material available 8A 250VAC +85°C 50k cycles

Hongfa Europe GmbH

58

Hongfa Europe GmbH

59

Hongfa Europe GmbH

60

Comparison HF118F 136 – HF118F

HF118F 136 – HF118F

Hongfa Europe GmbH

61

14. HF14FW 136

Features:

20A switching capability

TV-10 load

1.5mm contact distance is available

4kV dielectric strength(between coil and contacts)

Sockets available

Environmental friendly products, compliant to RoHS

Application:

UPS, Power, home appliance, industrial control

Cross Reference:

Omron G2R, TYCO OMI, FUJISTU FBR610, Panasonic JR1, Songchuan 793

(29.0×13.0×26.5) mm

Hongfa Europe GmbH

62

15. HF18FA

Features:

2 and 4 form C configurations

High load (2Z: 10A 30VDC/250VAC

4Z: 6A 30VDC/250VAC)

Surge withstand up to 2500V

Various terminals available

Environmental friendly products, compliant to RoHS

Application:

The product widely apply to industrial automation equipment, machinery equipment and other industrial control equipment.

Cross Reference:

Omron MY, Finder 55, TYCO PT

(21.5×28×35) mm

Hongfa Europe GmbH

63

Hongfa Europe GmbH

64

16. HFA2 / HFA4 / HFA6 Samples 2 pol IIIQ. 2009 serie end 2009 Samples 4 pol IIIQ. 2010 serie end 2010 Samples 6 pol IIIQ. 2011 serie end 2011

Features of HFA2

2 pole with either 1NO+1NC or 2CO contacts

Forcibly guided contacts according to EN50205

10kV surge resistance among coils and contacts

6kV surge resistance (between poles)

6A 250VAC Res. Load, 3A 250VAC,AC-15 load

Environmental friendly products, compliant to RoHS

Application:

This product widely apply to elevator and escalator control, Emergency shut-off, machine control, light barrier, could also use in the process of automotive making , industrial automatic control device, security and protection system and etc.

Cross Reference:

TYCO SR2M, HENGSTLER K-RBS, DOLD OA5669, ELESTA SIR282

(29×12.6×25.5) mm

Hongfa Europe GmbH

65

Features of HFA4 4 pole with either 2NO+2NC or 3NO+1NC contacts Forcibly guided contacts according to EN50205 10kV surge resistance among coils and contacts High shock resistance (Functional:200m/s2) Low operating power(360mW rate coil power) 6A 250VAC Res. Load, 2A 250VAC, AC-15 load Environmental friendly products, compliant to RoHS

Application:

This product widely apply to elevator and escalator control, Emergency shut-off, machine control, light barrier, could also use in the process of automotive machine tools , industrial automatic control device, security and protection system and etc.

Cross Reference:

Omron G7SA, Panasonic SFS, IDEC RF1V,

ELESTA SIR 4 contacts, TYCO SR4D

(40×13×24) mm

Hongfa Europe GmbH

66

Saftey relays are relays with special requirements acc. EN 50205 and ZH1/457 (ZH = Zweihandsteuerungen für Pressen) like:

- forcibly guided contacts (zwangsgeführte Kontakte)

- must have min. 1NO and 1NC

- contact gap must be never less 0,5mm over the hole life time of the

safety relays – not only under normal operating conditions, but also

when a fault occurs

- NC + NO can never simultanously in the closed position

Hongfa Europe GmbH

67

Safety relay typ. application: safety control circuits:

Hongfa Europe GmbH

68

17. HFE20 – compare with RTx3T

Samples mid. of 2009 serie end 2009 Optinal pre-make contact tungsten (W) Optional manual tab in preparation Inrush current till165A 20msec 5kV / 10mm creepage + clearance Monostable 400mW and/or latching 1 or 2 coils

Hongfa Europe GmbH

69

Hongfa Europe GmbH

70

Hongfa Europe GmbH

71

What is a pre-make contact ?

Twin contact electrically connected where one contact always closes first (pre-make) and opens last. The pre-make contact, for example out of tungsten (high resistive and very resistant to contact erosion), switches the current, while the second, like a low resistive silver contact, carries the load.

Pre-make contact is tungsten W and

second contact is AgSnO

Hongfa Europe GmbH

72

What is a pre-make contact ?

Pre-make absorb the inrush current !

Hongfa Europe GmbH

73

Cross reference

- Tyco RTx3T

Typ.application- building controls- actors- ripple control receiver (Rundsteuerempfänger)- etc.

Hongfa Europe GmbH

74

18. HFE21 Samples mid. of 2009 serie end 2009 120A 250VAC max 440VAC Two different kinds of terminal latching 1 or 2 coils Gruner

This are short circuit requirements !

Hongfa Europe GmbH

75

For example UC3-1 =

Hongfa Europe GmbH

76

HFE21 typ. application:

- electr. meter application

At the moment a lot of countries changed from electromechanical induction meter to solid state meters.

Hongfa Europe GmbH

77

HFE21 typ. application:

Solid state meters advantage:Some newer electricity meters are solid state and display the power used on an LCD, while newer electronic meters can be read automatically.In addition to measuring electricity used, solid state meters can also record other parameters of the load and supply such as maximum demand, power factor and reactive power used etc. They can also include electronic clock mechanisms to compute a value, rather than an amount of electricity consumed, with the pricing varying by the time of day, day of week, and seasonally.

It saves the cost of a human meter reader and the resulting mistakes, but it also allows more measurements, and remote provisioning. Many smart meters now include a switch to interrupt or restore service.

Hongfa Europe GmbH

78

19. HFE23 Samples mid. 2009 serie end 2009 3 phase relay 3 x 120A 250VAC max 440VAC latching 2 coils Gruner 733

Hongfa Europe GmbH

79

20. HFS32 SSR

- Samples now- 1 Form A SSR - Output current: vertical type 1 to 2Aa.c.

horizontal type 3 to 5Ad.c.- Output voltage: 240/380 Va.c., 24/48 Vd.c

Hongfa Europe GmbH

80

HFS32 types:Hongfa Type input output

HFS32D/5D-24D3M-N 5VDC 3…33VDC / 3A

HFS32D/24D-24D3M-N 24VDC 3…33VDC / 3A

HFS32D/60D-24D3M-N 60VDC 3…33VDC / 3A

HFS32D/5D-48D0R1T-N 5VDC 3…48VDC / 100mA

HFS32D/24D-48D0R1T-N 24VDC 3…48VDC / 100mA

HFS32D/60D-48D0R1T-N 60VDC 3…48VDC / 100mA

HFS32/5D-240A1Z-Y 5VDC 24…253VAC / 1A

HFS32/24D-240A1Z -Y 24VDC 24…253VAC / 1A

HFS32/60D-240A1Z-Y 60VDC 24…253VAC / 1A

HFS32D/5D-24D5M-NH 5VDC 3…33VDC / 5A

HFS32D/24D-24D5M-NH 24VDC 3…33VDC / 5A

HFS32D/60D-24D5M-NH 60VDC 3…33VDC / 5A

HFS32/5D-240A2ZH 5VDC 24…253VAC / 2A

HFS32/24D-240A2ZH 24VDC 24…253VAC / 2A

HFS32/60D-240A2ZH 60VDC 24…253VAC / 2A

Hongfa Europe GmbH

81

Cross Reference: Tyco V23109, Crydom CR

Hongfa Europe GmbH

82

Sockets for HFS32:

• 14FF-2Z-A1 – pcb

• 14FF-2Z-C2 – DIN Rail

• 14FF-2Z-C3 – DIN Rail

• 41F-1Z-C2 – DIN Rail

Hongfa Europe GmbH

83

HFS32 typ. applications:

• switch cabinets

I/O moduls

• light and building controls

lighting for warning and information signs

• industry control systems

• medical equipments

Hongfa Europe GmbH

84

With power

to success !