GENERAL PURPOSE - scgchemicals.com · purpose plastics. SCG Chemicals ... - High impact strength -...

GENERAL

PURPOSEPLASTICS

Disclaimer:

-

- It is customer’s responsibilities to inspect and test the product for suitability of the customer’s own use and purpose. The customer is responsible for appropriate, safe, legal use,

processing and handling of the product.

- To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication. We however do not assume any liability whatsoever for the

accuracy and completeness of the information contained herein.

- We make no warranties which extend beyond the description herein. Nothing herein shall constitute any implied warranty of merchantability or fitness for a particular purpose.

- No liability can be accepted in respect for the use of the product in conjunction with other materials. The information contained herein relates exclusively to the product when it is

not used in conjunction with any third party’s materials.

Rev. Jan 2018 valid until next revision

The applications specified for reference only.

INTRODUCTION

01

Our Production Capacity (As of 2018)

(PE / PP / PVC)

Total Capacity : 2,878 KTA

Polyolefin

Total : 1,912 (KTA)

PVC

Total : 966 (KTA)

HDPE 920

PP 720

LLDPE 120

LDPE 152

PVC Resin 850

PVC Compound 80

PVC Paste Resin 36

SCG Chemicals is one of the largest integrated petrochemical companies in Asia and a key industry leader.

We manufacture and supply a full range of petrochemical products ranging from upstream monomers to

downstream polymer including PE, PP, PVC, PS and MMA.

To better serve customers’ requirements, SCG Chemicals assign prime importance to development of new

technology and innovation for the creation of high value-added products and services (HVA).

Widely recognized for product quality as well as for excellent management and world-class operation

efficiency, SCG Chemicals has joint ventured with a number of the world’s leading chemical companies,

including the DOW Chemical Company, Mitsui Chemicals and Mitsubishi Rayon.

EL-Lene™ is a trademark of polyethylene resin, manufactured by utilizing the world class technology from

Mitsui Chemicals, Inc. of Japan. With the intention to serve the resin in various industries including general

purpose plastics. SCG Chemicals specifically designs EL-Lene™ to serve variety of worldwide customer’s

requirement.

Polyethylene Resin

03

HDPE ResinGeneral Film Application

EL-Lene™ HDPE produced by bimodal process, the cutting edge

technology developed by Mitsui Chemicals Inc. of Japan.

Remark: Film produced at TPE, 12 mircron and BUR 5:1

0.04 0.06

0.954 0.952

MD 620 ,TD 310 MD 910 , TD 380

MD 3 , TD 135MD 3 , TD 80

- High tensile strength

- Suitable for general

- High tensile strength and high productivity

- Film produced by high speed machine and

General purpose bag, Shopping bag, Roll-bag, Liner bag,

Industial bag, Garbage bag, PE-glove

MFR

(g/10min)

Density

(g/cm³)

Film Tensile Strength at

Break MD/TD

(kg/cm2)

Film Tear Strength

MD/TD (g)

Recommended

Application

Key Characteristic

H5604F F15Grade

purpose film wide lay flat(>25”)

consumer goods, for different production processes such as film,

With prudent production control and the use of premium quality

additives to ensure high quality of end products, EL-Lene™ HDPE

resin is an ideal for various applications, both industrial and

blow molding and monofilament.

04

HDPE ResinInjection Molding Application

14.0

0.956

280

12,500

29

- High processability

- Good impact resistance

- Food contact applicable

- General injection part

- Household product

- Bottle cap and closure

- Toy

MFR

(g/10min)

Density

(g/cm³)

Tensile Strength at Yield

(kg/cm2)

Flexural Modulus

(kg/cm2)

Notched Izod Impact @ 23°C

(J/m)

Recommended

Application

Key Characteristic

H5814JGrade

- Office article

05

HDPE ResinBlow Molding Application

0.70 0.40 0.30 0.40

0.965 0.964 0.960 0.955

15,000 15,000 13,000 12,000

147 245 98 98

24 24 100 300

- Milk bottle

- Fruit juice bottle

- Good processibility

- Odorless

- Excellent surface

appearance

- Good impact and

compressive

strength

- Drinking water

bottle

- Milk bottle

- Personal and

homecare bottle

- Milk bottle

- Lube oil bottle

- Chemical bottle

- Personal and

homecare bottle

- Lube oil bottle

MFR

(g/10min)

Density

(g/cm³)

Flexural Modulus

(kg/cm2)

Notched Izod Impact @23°C

ESCR

(hrs, F50)

Recommended

Application

Key Characteristic

H6670B H6430BM H6140B H5840BGrade

- Excellent stiffness

- Excellent stiffness

appearance

- Excellent ESCR

- Good surface

(J/m)

06

HDPE Resin

0.80

0.952

10,000

167

30

Net ,Rope,Tarpaulin ,Woven sack

- High tenacity

- Good processability

- Balance softness and mechanical strength

- Good weathering property

- Suitable for color mixing

- Food contact applicable

MFR

(g/10min)

Density

(g/cm³)

Flexural Modulus

(kg/cm2)

Notched Izod Impact @ 23°C

ESCR

(hrs, F50)

Recommended

Application

Key Characteristic

H5480SGrade

(J/m)

07

LLDPE ResinGeneral Film Application

EL-Lene™ LLDPE resin is linear low-density polyethylene

by a a technology developed

by BP Chemicals Co., Ltd. of England. Our LLDPE resin

MFR

(g/10min)

Density

(g/cm³)

Tensile Strength at

Break MD/TD

(kg/cm2)

Tear Strength*

MD/TD

(g)

Dart Drop

(g)*

Slip/Anti-Block

Recommended

Application

Key Characteristic

1.0 1.0 1.0

0.920 0.921 0.921

MD 380, TD 350 MD 380, TD 350

MD 145, TD 370

MD 470, TD 170

MD 145, TD 370 MD 145, TD 370

130130 130

YesNo Yes

- General purpose bag - General purpose bag

for vegetable or fruit

packaging

- General purpose bag

- High productivity and can

be blened well with HDPE

or LLDPE resin to improve

tear

- High productivity and can

be blened well with HDPE

or LLDPE resin to improve

tear

- High clarity water-quenced

- Good openability

Grade L2009FA L2009F L1810Fl

Remark: * Film produced at TPE, 38 micron, BUR 2:1

producedresin gas phase process,

offers

excellent properties and are mainly used for film applications.

film

- Water-quenced blown film

EL-Pro™ is a trademark of polypropylene resin produced by utilizing a modern technology recognized

worldwide from Mitsui Chemicals Inc. of Japan. Meticulous production control and the careful selection of

additives ensure that each type of EL-Pro™ possess outstanding properties. We also provide a cover range

of Polypropylene resin including PP Homopolymer, PP Block Copolymer and PP Random Copolymer resin.

Polypropylene Resin

09

PP Homopolymer ResinGeneral Film Application

EL-Pro™ PP Homopolymer resin have high isotactic

index that provides good stiffness ideal for household

articles and food packaging films.

10.0

MD 280 , TD 260

MD 850 , TD770

17,000

Yes

- Water-quenched blown film for general

purpose packaging and food packaging

- Good optical

- Good openability

MD 850 , TD770

10.0

MD 280 , TD 260

17,000

No

- Water-quenched blown film for thick

packaging such as food packaging and

display bag (>100 micron thickness)

- Excellent optical

MFR

(g/10min)

Tensile Strength at Break

MD/TD

(kg/cm2)

Elongation at break

(%)

Flexural Modulus

(kg/cm2)

Slip/Antiblock

Recommended

Application

Key Characteristic

P600F P602FGrade

10

PP Homopolymer ResinInjection Molding Application

3.5 12.0

320 320 320 420

13,500 14,500 15,500 17,000

41 37 34 34

- Furniture

- Fruit basket

- Household product

- Toy

- Office accessory

- Food container

- Infant article

- Furniture

- Fruit basket

- Household product

- Toy

- Office accessory

- Food container

- Infant article

- Furniture

- Fruit basket

- Household product

- Toy

- Office accessory

- Food container

- Infant article

- Food container

- Toy

- Household product

12.0MFR

(g/10min)

Tensile Strength at Yield

(kg/cm2)

Flexural Modulus

(kg/cm2)

Notched Izod Impact @23°C

Recommended

Application

Key Characteristic

12.0

- Good impact

resistance

- Odorless

- Food contact

applicable

- High processibility

- Odorless

- Good stiffness

- Food contact

applicable

- High processibility

- Odorless

- Good stiffness

- Food contact

applicable

- Good clarity and gloss

- High stiffness

- High processibility

- Odorless

- Food contact

applicable

P403J P700J P701JGrade P702J

(J/m)

11

PP Homopolymer ResinFlat Yarn Application

3.5

320 320

13,500 13,500

40 41

- Small woven sack

- Straw

- Rope

- Woven sack (Jumbo bag/ Industrial

woven sack)

- Tarpaulin

- Straw

- Rope

- Sheet and thermoforming

MFR

(g/10min)

Tensile Strength at Yield

(kg/cm2)

Flexural Modulus

(kg/cm2)

Notched Izod Impact @23°C

Recommended

Application

Key Characteristic

2.4

- High productivity

- High mechanical properties

- Less water-carry over

- Food contact applicable

- High mechanical properties with balance

softness

- Good processability

- Food contact applicable

P400S P401SGrade

(J/m)

12

PP Block Copolymer ResinInjection Molding Application

EL-Pro™ PP Block Copolymer resin offers excellent

impact resistance property ideal for injection molding

products that demand high impact strength, and

odorless, recommended for automotive & home

appliance part, and industrial use.

5.0 5.0 5.0 10.0 10.0

270 270 300 280 250

12,500 12,500 16,500 12,000 12,000

118 118 108 98 NB

- High impact

strength

- Good stiffness

- Food contact

applicable

- High impact

strength

- Good stiffness

- Good UV

resistance

- Very high

stiffness

- Good impact

strength

- Good

dimensional

stability

- High heat

resistance

- UV resistance

and contain

anti-static

agent

- High impact

strength

- Good stiffness

- Good

processibility

- Food contact

applicable

- Excellent

impact

strength

- High stiffness

- Good

processibility

- Pail

- Crate

- Industrial use

- Automotive

- Home

appliance part

- Furniture

- Container

- Pail

- Crate

- Industrial use

- Automotive

- Home

appliance part

- Any part that

requires

outdoor use

- Returnable

transport

packaging

such as pallet,

crate, and

container

- Automotive

and home

appliance part

- Any part that

requires

outdoor use

- Industrial use

- Automotive

- Home

appliance part

- Furniture

- Toy

- Pail

- Crate

- Industrial use

- Luggage

- Container

- Furniture

- Automotive

- home

appliance

part

MFR

(g/10min)

Tensile Strength at Yield

(kg/cm2)

Flexural Modulus

(kg/cm2)

Notched Izod Impact

@23°C

Key Characteristic

Recommended

Application

Grade P440J P441JU P483JU P640J

10.0

280

14,000

98

- Good

flowability

- Excellent

stiffness

- High impact

strength

- Mechanical

property

balance

- Contain UV

stabilizer and

anti-static

agent

- Industrial use

- Automotive

- Home

appliance part

P642J P667J

- Pail

- Crate

- Industrial use

- Luggage

- Container

- Furniture

- Automotive

- home

appliance

part

(J/m)

13

PP Block Copolymer ResinInjection Molding Application

43.0 40.0

290 260 295 300

12,500 12,000 14,500 13,000

70 70 74 98

- Automotive

- Home appliance

part

- Complicated

industrial part

- Any part that

requires outdoor

use

- Washing machine

part such as tub,

base, panel

- Industrial use

- Home appliance

part

- Any part that

requires outdoor

use

- Washing machine

part such as tub,

base, panel

- Industrial use

- Home appliance

part

- Refrigerator part

MFR

(g/10min)

Tensile Strength at Yield

(kg/cm2)

Flexural Modulus

(kg/cm2)

Notched Izod Impact

@23°C

Recommended

Application

Key Characteristic

40.0 10.0

- High impact

strength

- Good stiffness

- Good processibility

- Food contact

applicable

27.0

290

12,500

78

- Automotive

- Home appliance

part

- Complicated

industrial part

- Any part that

requires outdoor

use

- High impact

strength

- Good stiffness

- Good processibility

- Food contact

applicable

- High stiffness

- Good impact

strength

- Good processibility

- Good UV

resistance

- Very High stiffness

with good impact

balance

- Dimensional

stability

- Battery case

- Automotive

- Home appliance

part

- Industrial use

- High stiffness with

good impact

balance

- Dimensional

stability

- Good processibility

- Good UV

resistance

P840J P841J P842J P722JOGrade P740J

(J/m)

14

12.0

300

12,000

65

- Clear food container

- Clear household product

- Article that requires high

transparency

MFR

(g/10min)

Tensile Strength at Yield

(kg/cm2)

Flexural Modulus

(kg/cm2)

Notched Izod Impact @23°C

Recommended

Application

Key Characteristic

- High gloss

- High clarity

- Food contact applicable

- Good impact resistance

PP Random Copolymer ResinInjection Molding Application

EL-Pro™ PP Random Copolymer resin

has the qualities needed for injection molding

products that require a high degree of

transparency and beautiful surface.

P750J

20.0

320

12,500

60

- Clear food container

- Clear large size container

- Household product

- Article that requires high

transparency

- High gloss

- High clarity

- High brightness

- Odorless

- Good processibility

- Food contact applicable

P851JOGrade

(J/m)

PP For Coating Application

15

245

8,900

130

- Coated woven bag

- BOPP film

- Paper laminated woven bag

MFR

(g/10min)

Tensile Strength at Yield

(kg/cm2)

Flexural Modulus

(kg/cm2)

Vicat Temperature

(°C)

Recommended

Application

Key Characteristic

28.0

- Excellent adhesion

- Good processability

- Softness

- High gloss surface

- High impact strength

280

1,1000

140

- Tarpaulin

- PP woven bag

- BOPP and paper substrate

28.0

- Good processability

- Good adhesion on substrate

- Balance stiffness and impact

strength

P756CGrade P838C

SCG Chemicals offers a variety of PVC suspension resin manufactured by Thaiplastic and Chemicals Co., Ltd.

(TPC) with various molecular weight or “K Values” to serve as a raw material across a wide range of PVC

finished products.

Our products are produced from technologies developed by Mitsui Chemicals of Japan, INEOS Chlor Vinyls

Limited of UK. and Chisso Corporation of Japan.

We continuously work closely with our customers in product development to create new applications of

PVC and new resin that can satisfy specific needs, reduce cost, as well as enhance efficiency for the most

effectiveness of customers.

PVC Resin

General Grade PVC Resin Our PVC resin is produced by suspension polymerization

process, while powder and free-flowing resin blended

with other additives by using standard mixing

techniques. They are developed to serve a wide range of

usages especially for general propose products.

Remarks: Typical value only

58.0 58.0 61.0 65.9 65.7 71.0

0.57 0.57 0.57 0.55 0.56 0.49

<0.3 <0.3 <0.3 <0.3 <0.3 <0.3

<2 <2 <2 <2 <2 <2

>90 >90 >90 >90 >90 >90

<20 <20 <20 <20 <20 <20

- Floortile

- Fitting

- Rigid injection

product

- Adhesive

- Rigid sheet

packaging

- Stationery

- Furniture trim

- Construction

profile

- Bottle &

IC tube

- Rigid sheet

packaging

- Stationery

- Credit card

- Floor covering

- Sticker &

decorative

sheet

- Floortile

- Furniture trim

- Construction

profile

- Shrink film

- Flexible sheet

packaging

- Curtain

- Floor covering

- Furniture trim

- Shrink film

- Hose

- Electrical wire

& cable

- Shoes

- Toy

- Pipe

- Door/Window

& frame

- Construction

profile

- Flexible sheet

packaging

- Artificial leather

- Infatable toy

- Electrical tape

- Gasket

- Automotive part

- Hose

- Electrical wire

& cable

- Wire harness

K Value

(ISO 1628-2)

Apparent Bulk Density

(g/ml)

(ISO 60)

Volatile Matter

(%)

(ISO 1269)

Sieve Analysis,

Retained on 250 micron

(%)

(ASTM D1921)

Sieve Analysis,

Retained on 75 micron

(%)

(ASTM D1921)

Impurity and

Foreign Matter

(Specks/100sq)

(ISO/R-1265)

Recommend

Application

SF580 SG580 SG610 SG660 SP660 SG710Grade

17

18

Special Grade PVC ResinNon-Bisphenol A Series

Our Non-Bisphenol A Series has a good fish eye

property, initial coloration and thermal stability with

low contamination level.

Remarks: Typical value only

58.0 61.0 65.8 65.7 70.9

0.57

<0.3

<2

<10

<1 <1 <1<1 <1

- - ->3.0 x 1013 >3.0 x 1013

<10 <10 <10 <10

<2 <2 <2 <2

>90 >90 >90 >90 >90

<0.3 <0.3 <0.3 <0.3

0.57 0.55 0.56 0.49

K Value

(ISO 1628-2)

Apparent Bulk Density

(g/ml)

(ISO 60)

Volatile Matter

(%)

(ISO 1269)

Sieve Analysis,

Retained on 250 micron

(%)

(ASTM D1921)

Sieve Analysis,

Retained on 75 micron

(%)

(ASTM D1921)

Impurity and Foreign Matter

(Specks/100sq)

(ISO/R-1265)

Residual Vinyl Chloride

Monomer

(ppm)

(ASTM D3749)

Volume Resistivity

(Ohm-cm)

(Inhouse Method)

Recommend

Application

SG58J SG61J SG66J SP66J SG71JGrade

- Rigid sheet

packaging

- Credit card

- Blister pack

- Furniture trim

- Construction

profile

- Bottle & IC tube

- Shrink film

- Rigid sheet

packaging

- Credit card

- Blister pack

- Sticker &

decorative sheet

- Furniture trim

- Construction

profile

- Shrink film

- Shoes

- Toy

- Flexible sheet

packaging

- Sticker &

decorative sheet

- Curtain

- Furniture trim

- Shrink film

- Hose

- Wrap & cling film

- Electrical wire &

cable

- Shoes

- Toy

- Pipe

- Door/Window &

frame

- Construction

profile

- Flexible sheet

packaging

- Artificial leather

- Infatable toy

- Electrical tape

- Gasket

- Automotive part

- Hose

- Electrical wire &

cable

- Wire harness

58.0 65.8 71.3

0.57 0.53 0.49

<0.3 <0.3 <0.3

<2 <2 <2

<10 <10 <10

- >3.0x1013 >3.0x1013

- Rigid sheet packaging

- Credit card

- Blister pack

- Furniture trim

- Construction profile

- Bottle & IC tube

- Shrink film

- Flexible sheet packaging

- Sticker & decorative sheet

- Curtain

- Furniture trim

- Shrink film

- Hose

- Wrap & cling film

- Electrical wire & cable

- Flexible sheet packaging

- Artificial leather

- Infatable toy

- Electrical tape

- Gasket

- Automotive part

- Hose

- Electrical wire & cable

- Wire harness

K Value

(ISO 1628-2)

Apparent Bulk Density

(g/ml)

(ISO 60)

Volatile Matter

(%)

(ISO 1269)

Sieve Analysis,

Retained on 250 micron

(%)

(ASTM D1921)

>90 >90 >90

Sieve Analysis,

Retained on 75 micron

(%)

(ASTM D1921)

<5 <5 <5

Impurity and Foreign Matter

(Specks/100sq)

(ISO/R-1265)

<1 <1 <1

Residual Vinyl Chloride

Monomer

(ppm)

(ASTM D3749)

Fish Eye

(Point/150 cm2)

(Inhouse Method)

Volume Resistivity

(Ohm-cm)

(Inhouse Method)

Recommend Application

Special Grade PVC ResinZ Series

Our unique PVC resin Z Series has an extremely low fish

eye count, excellent initial coloration and thermal stability,

high degree of transparency with low contamination

levels.

SG58Z SG66Z SG71ZGrade

Remarks: Typical value only

19

20

Special Grade PVC ResinLow & High K Value Series

Our Low K Value has faster fusion behavior, high melt

flow index (MFI) with low contamination levels and our

High K Value has an excellent plasticizer absorption,

dry up abilities, high strength and elasticity, excellent

mechanical performance of finished articles.

50.3 70.3 76.5 84.9

0.59 0.48 0.47 0.48

< 0.3 < 0.3 < 0.3 < 0.3

< 2 < 2 < 2 < 2

> 90 > 90 > 90 > 90

<10 < 10 < 10 < 10

< 1 < 1 < 1 < 1

<10

- Floortile

- Fitting

- Rigid injection

product

- Adhesive

- Flexibe sheet packaging

- Gasket

- High strength and

thermal stability (wire &

cable, wire & harness

and electrical taper, etc.)

- High strength flexible sheet (matt, cover,

flexible sheet, packaging, artificial leather,

inflatable toy, etc.)

- High strength & abrasive resistance flexible

product (automotive part, hose, shoe, etc.)

- High strength and thermal stability (wire &

cable, wire harness and electrical tape, etc.)

- High eleasticity product (loop sandal, gear

knob, brush, etc.)

<10 <10 <10

- > 3.0 x 1013 > 3.0 x 1013 > 3.0 x 1013

K Value

(ISO 1628-2)

SG500 SG730 SG760 SG840Grade

Apparent Bulk Density

(g/ml)

(ISO 60)

Volatile Matter

(%)

(ISO 1269)

Sieve Analysis,

Retained on 250 micron

(%)

(ASTM D1921)

Sieve Analysis,

Retained on 75 micron

(%)

(ASTM D1921)

Impurity and Foreign Matter

(Specks/100sq)

(ISO/R-1265)

Residual Vinyl Chloride

Monomer

(ppm)

(ASTM D3749)

Fish Eye

(Point/150 cm2)

(Inhouse Method)

Volume Resistivity

(Ohm-cm)

(Inhouse Method)

Recommend

Application

Remarks: Typical value only

Shanghai

Guangzhou

Australia

Surabaya

Ho Chi Minh

Myanmar

Hanoi

Thailand

Overseas Offices & Contact Information

Head Office: SCG Plastics Co., Ltd.

1 Siam Cement Road, Bangsue, Bangkok,

Thailand 10800

Tel: +662 586 1111 Ext. 5897

Fax: +662 586 5514

Email: general_plastics@scg.com

SOUTHEAST ASIA

PT. TPC Indo Plastic and Chemicals (Surabaya Office)

Lt.5, unit S 508-509, Kompleks Graha Festival Kav.3 Mayjend

Yono Soewoyo, Graha Family, Surabaya 60226

Tel. +62 319 900 120 56

Fax. +62 319 900 1204

CHINA

SCG Plastics Co., Ltd. (Hanoi Office)

SCT Co., Ltd. (Hanoi) Representative Office

196 Truong Chinh, Dong Da dist., Hanoi city

Tel. +84 439 744 354

Fax. +84 439 744 350

Viet-Thai Plastchem Co., Ltd.

An Phu Ward, Thuan An Town, Binh Duong, Vietnam

Tel. +84 650 374 0060

Fax. +84 650 374 0065

SCG Plastics Co., Ltd. (Ho Chi Minh Office)

10th Floor, An Phu Plaza 117-119 Ly Chinh

Thang P7, Q3 Ho Chi Minh City, Vietnam

Tel. +84 988 804 672

Fax. +84 829 612 76

TPC Vina Plastic and Chemicals Corporation Co., Ltd. (Ho Chi Minh Office)

U.901-9th Fl., Harbor View Tower, 35 Nguyen Hue Street District 1,

Hochiminh City, Vietnam

Tel. +84 838 234 730

Fax. +84 838 234 725

Chemtech Co., Ltd.

D_8A4_CN, My Phuoc 3I.P, Ben Cat, Binh Duong, Vietnam

Tel. +84 650 378 4992 Ext. 440

Fax. +84 650 378 4993

SCG Plastics Co., Ltd.

2nd floor N. 136/137, Pyay Road, Saw Bea

Gyi Gone, Yangon, Myanmar

Tel. +95 951 946 41, +95 973 183 332

MYANMAR

VIETNAM

SCG Plastics (China) Co., Ltd. (Shanghai Office)

RM 1012 Huarong Building No.1271-1289, South of Pudong

Road, Pudong New Area, Shanghai, China, 200122

Tel. +86 182 170 743 69

Fax. +86 216 888 6092

AUSTRALIA

SCG Trading Australia Pty Ltd.

Level 4, No.1 Chandos Street,

St. Leonards NSW 2065, Australia

Tel. +61 294 381 225, +61 411 022 231

Fax. +61 294 360 195

SCG Plastics (China) Co., Ltd. (Guangzhou Office)

Unit 3207, Block B, China Shine Plaza, No.9 Lin He Xi

Road, Tianhe, Guangzhou, China 510610

Tel. +86 139 030 579 29

Fax. +86 203 810 1370

INDONESIA

SCG Plastics Co., Ltd.

1 Siam Cement Road, Bangsue, Bangkok, Thailand 10800

Tel. +662 586 1111 Ext. 5897 Fax. +662 586 5514

www.scgchemicals.com