Flexi Cut - marketing.xpres.co.ukmarketing.xpres.co.uk/downloads/instruction-sheets/xp3007.pdf ·...

Phone:Web:E-mail:Support:

01332 855 085www.xpres.co.uksales@xpres.co.ukwww.xprestechnical.co.uk

Oakridge Park, Trent LaneCastle Donington, DerbyDE74 2PY

STEP BY STEP

Step 1

Step 2

Step 3

Step 4

Cut your design in mirrorimage

Weed away any excess material

Place transfer face down onto the garment with the transparent backing on topand press for 10 seconds at 140°C

Remove the transparentbacking cold

PLEASE NOTE: A4 samples are available free of charge upon request, for larger samples 1m rolls are available for purchase.

Uncoated garments only

Do not iron

Can be dry cleaned

Can be tumble dried

Up to 80°C

CARE INFORMATION

TRANSFER SETTINGS

PRESSURE

PEEL

TEMPERATURE

TIME

Medium

Cold

10 seconds

140°C

Cotton

Polyester

Polyester/Cotton

Sublimated Football Shirts

SUITABLE FOR

PRODUCT INFORMATION

SIZE:

CUTTING FORCE:

TRANSFER LAYERING:

50cm wide x 5 & 30m rolls

No

Matt Cold250µ No Tack PVC80°C

DURABILITY FINISH PEELMICRONS TACK PU or PVC

® XP3007 - 50cm wide

Flexi Cut®

PLEASE NOTE: The sellers and manufacturers maximum obligation shall be to replace any product that has been proven to be defective. Neither the seller nor the manufacturer of Flexi Cut shall be liable for any injury direct or consequential, arising out of the use of, or inability to use this range. Flexi Cut has been tested using Kustom Kit garments, when applying to other garment brands results may vary, testing prior to purchase is recommended.

Class 2

STORAGE: Store vertically in a dry room between 15-30 °C

FILM BLADE - From 90gfFLOCK BLADE - From 30gf

ALL FORCE TESTING HAS BEEN UNDERTAKEN USING NEW BLADES ON A ROLAND GS24. THE FORCE REQUIRED WILL INCREASE WITH THE AGE OF THE BLADE, THEREFORE TESTING ISREQUIRED PRIOR TO USE.