Fire Seal Full Presentation

A DIVISION WITHIN

FireSeal - founded some 30 years ago with head office close toStockholm, Sweden.

Initially a supplier to nuclear power plants – since 20 year´s ourcore business is the marine & offshore market.

Fireseal a business unit within the mother company Essve with anannual turnover of € 60 million and 135 employees.

Essve owned by B & B Tools, a public company with an annualturnover of € 617 million (US$ 831 million).

COMPANY OVERVIEW

WORLDWIDE PRESENCE

North AmericaSouth America

AustriaCroatiaDenmarkDubaiFinlandIcelandItalySwedenNorwayPolandRussiaTurkeyU.K

AustraliaChinaHong KongRussiaMalaysiaSouth KoreaSingaporeVietnam

TESTING & APPROVALSFireSeal´s systems are designedin accordance with the SOLAS(Safety Of Life At Sea) regulationand IMO resolution (InternationalMaritime Organization).

All FireSeal´s systems areapproved for A0 - A60 or H0 - H60classification and resistance to;

- Fire- Water- Pressure- Smoke- Gas- Vibrations & Movements

US Coast Guard

Det Norske Veritas

Bureu Veritas

MED Germanischer Lloyd

ABS

Rhina

Korean Register

FireSeal´s systems has undergone testing under the harshest conditionspossibly and is certified by major authorities and classification societiessuch as;

Lloyd´s Register

TESTING & APPROVALS

One of the fastest and easiest system on themarket for cable, pipe and ductwork penetrations!

FLEX-D SYSTEM

FLEX-D SYSTEM

Smoke, gas, water and pressureresistance.

Average 20 min. installation time.

Movements and vibration of pipesand cables are accepted.

Two part numbers independently of;

a) pipe or cable penetration.b) sizes of cables.c) penetration size opening.

1. Firestop Sealant 3000 (Silicone Sealant)2. Blanket D-24B (Non-combustible calcium silicate fibre)

Watertight up to 2,5 kg (25 m or 2,5bar).

A0 - A60 and H0 - H60.

Cable penetration < 800 x 400 mm.

Pipe penetration < 534 x 274 mm

Uninsulated steel pipe < 48,3 mm.

Insulated steel pipe < 273 mm.

FLEX-D SYSTEM

FLEX-D PIPE INSTALLATION

FLEX-D PIPE INSTALLATIONA0 - A60 SLEEVE LENGTH 200 MM (H0 - H60 250 MM)

BLANKET D-24BFIRESTOP SEALANT 3000HANDTOOL & KNIFE

WHAT YOU NEED

REMOVE ANY LOOSE DEBRIS

CUT BLANKET D-24B, 100 MM WIDTH

ROLL THE BLANKET TO SUITABLE SIZE

ROLL THE BLANKET TO SUITABLE SIZE

PACK CAVITY WITH BLANKET

PACK CAVITY WITH BLANKET

PACK CAVITY WITH BLANKET

PACK CAVITY WITH BLANKET

PACK CAVITY WITH BLANKET

APPLY FIRESTOP SEALANT 3000

APPLY FIRESTOP SEALANT 3000

APPLY FIRESTOP SEALANT 3000

FINISHED SEAL ON ONE SIDE!

NOW THE OTHER SIDE OF THE SEAL

ROLL THE BLANKET

PACK CAVITY WITH BLANKET

APPLY FIRESTOP SEALANT 3000

TOTAL INSTALLATION TIME 10 - 15 MINUTES!

FLEX-D CABLE INSTALLATION(NEW PENETRATION)

FLEX-D CABLE INSTALLATION

WHAT YOU NEEDBLANKET D-24BFIRESTOP SEALANT 3000HANDTOOL & KNIFE

REMOVE LOOSE DEBRISE

CUT BLANKET 100 MM WIDE STRIP

ROLL THE BLANKET TO SUITABLE SIZE

PACK CAVITY WITH BLANKET

PACK CAVITY WITH BLANKET

PACK CAVITY WITH BLANKET

PACK CAVITY PROPERLY WITH BLANKET

DISTANCE 15 MM (A0 - A60) 25 MM (H0 - H60)

THE CAVITY IS PROPERLY PACKED

APPLY FIRESTOP SEALANT 3000

APPLY FIRESTOP SEALANT 3000

APPLY FIRESTOP SEALANT 3000

APPLY FIRESTOP SEALANT 3000

APPLY FIRESTOP SEALANT 3000

EVEN OUT THE FIRESTOP SEALANT 3000

EVEN OUT THE FIRESTOP SEALANT 3000

EVEN OUT THE FIRESTOP SEALANT 3000

ADD FIRESTOP SEALANT 3000 FORWATER TIGHTNESS IF NECCESARRY

NOW THE OTHER SIDE OF THE SEAL

FINISHED SEAL WITHIN 15 - 20 MINUTES!

FLEX-D CABLE INSTALLATION(ADDING A NEW CABLE)

CUT A HOLE WITH A KNIFE

PUSH THE CABLE THROUGH THE HOLE

ALTERNATIVE TOOL FOR ADDING CABLE

SEAL AROUND THE CABLE WITHFIRESTOP SEALANT 3000

EVEN OUT THE SEALANT

FIRESEAL FLEX-D BENEFITS

AVERAGE 20 MINUTES OPERATION.INSTALLATION

EASY, 5 MINUTES OPERATION.MODIFICATION

NO SPECIAL FRAMES REQUIRED.

TECHNICAL TRAINING

FLEX-D REQUIRES ONLY TWO PART NUMBERSINDEPENDANTLY OF APPLICATION AND PENETRATIONSIZE OPENING.

BUNDLED CABLES ACCEPTED.

20 - 30 MIN INSTALLATION TRAINING REQUIRED.

CABLE INSTALLATION

PART NUMBERS

FRAME INSTALLATION

* The FireSeal benefit overview is based upon using FireSeal Flex-D system which is the main FireSeal system usedfor all types of applications i.e. cables, pipes and ductwork.

WEIGHT LIGHT WEIGHT FIRE SEALING SYSTEM.

TOTAL COST VERY COMPETITIVE!

FS-03 SYSTEM1. Silicone foam D-03 comp. A and D-03 comp. B2. Blanket D-24B3. Silicone foam machine

2-component sealing system forcables, pipes and ductwork.

Suitable especially for larger andcomplicated penetrations.

Smoke, gas, water and pressureresistance.

Movements and vibration of pipesand cables accepted.

Installed by approved applicatorshaving access to special equipment.

0,5 bar resistance.

A0 - A60 and H0 - H60

Insulated steel pipe < 273 mm.

Uninsulated steel pipe < 60 mm.

Penetration opening < 600 x 400 mm.

FS-03 SYSTEM

FS-03 SYSTEM INSTALLATION

FIRESEAL FS-03 INSTALLATION

CUT BLANKET 25 MM WIDE STRIP

ROLL THE BLANKET TO SUITABLE SIZE

FILL THE CAVITY WITH THE BLANKET

FILL THE CAVITY WITH THE BLANKET

FILL THE CAVITY WITH THE BLANKET

PUT BLANKET D-24B BETWEEN CABLES

FILL CAVITY WITH FIRST LAYER OF FS-03

LEAVE FOR CURING ABOUT 3 MIN.

FILL CAVITY WITH SECONDAND A THIRD LAYER OF FS-03

LEAVE FOR CURING BETWEENTHE FILLING ABOUT 3 MIN.

FINAL RESULT USING FIRESEAL FS-03

PIPELOCK PL SYSTEM1. Pipelock PL (Phenolic plastic)2. FireStop Sealant 30003. Two steel sliding cleats

Complete, factory made seal forsingle plastic pipes.

Phenol plastic material i.e. 100 %corrosion resistant.

Available sizes: PL 55, PL 82,PL 110 and PL 160.

One of the fastest and easiestsystem on the market to install.

3 bar watertightness inconjunction with FireStop Sealant3000.

A0 - A60 approval.

Plastic pipe up to 160 mm in steelbulkhead / decks

Plastic pipe up to 110 mm inaluminium bulkhead / decks

PIPELOCK PL SYSTEM

PIPELOCKPLASTIC PIPE INSTALLATION

PIPELOCK PLASTIC PIPE INSTALLATION

PIPELOCK PARTS

PIPELOCK PARTS

PLACE THE PIPELOCKAROUND THE PLASTIC PIPE

PLACE THE PIPELOCKAROUND THE PLASTIC PIPE

To safeguard against the passage of smoke or gas, or to obtainwatertightness the joint beetween the pipe and the steel division should besealed with FireStop Sealant 3000.

PLACE THE PIPELOCKAROUND THE PLASTIC PIPE

LOCK THE PIPELOCK WITH THE CLAMPS

LOCK THE PIPELOCK WITH THE CLAMPS

LOCK THE PIPELOCK WITH THE CLAMPS

LOCK THE PIPELOCK WITH THE CLAMPS

SECURE PIPELOCK TO BULKHEADWITH SELF-TAPPING SCREWS

FINAL RESULT WITHIN 10 - 15 MINUTES!

SQUEEZER A1. Squeezer A2. Firestop Sealant 3000

Corrosion treated steel materialfor applications with limitedwater exposure.

Watertight: 300 kPa (30 mWC)

A0 - A60 approval.

Very simple and fast installation.

Standard plastic pipe sizes:55, 82, 114 and 110 mm

Complete, factory made sealfor single plastic pipes.

SQUEEZER APLASTIC PIPE INSTALLATION

SQUEEZER PLASTIC PIPE INSTALLATION

SQUEEZER PART

PLACE THE SQUEEZER AROUND THE PIPE

PLACE THE SQUEEZER AROUND THE PIPE

To safeguard against the passage of smoke or gas, or to obtainwatertightness the joint beetween the pipe and the steel division should besealed with FireStop Sealant 3000.

LOCK THE SQUEEZER

LOCK THE SQUEEZER

POSITION THE SQUEEZER

SECURE TO BULKHEAD OR DECKWITH SELF-TAPPING SCREWS

FINAL RESULT WITHIN 10 - 15 MINUTES!

SQUEEZER BMULTIPLE PLASTIC PIPES

SQUEEZER B1. Blanket D-24B (Non-combustible calcium silicate fibre)2. FireStop Sealant 3000 (Silicone elastomer)3. Graphite material

Complete, factory made seal formultiple plastic pipes.

Very simple, fast installation.

Ideal for plastic pipes up to 110mm.

Watertight: 250 kPa (25 mWC)

A0 - A60 approval.

REFERENCE LIST – MARINE

T-AKE-1 (NASSCO) Ammunition ShipCharles de Gaulle Aircraft CarrierVistafjord Cruise ShipSea Princess Cruise ShipSilja Symphony Passenger / Car ferrySilja Serenade Passenger / Car ferryFantasy Cruise ShipEcstasy Cruise ShipSong of Norway Cruise ShipSong of America Cruise ShipBirka Princess Cruise ShipSea Godess l & ll Cruise ShipWellamo Passenger / Car ferrySvea Passenger / Car ferryKarhu Ice-breaker

Isabella Passenger / Car ferryFrans Suell Passenger / Car ferryDawn Princess Cruise ShipSun Princess Cruise ShipSuper Carneval Cruise ShipRyndam Cruise ShipRhapsody of the Seas Cruise ShipAmorella Passenger / Car ferryAthena Passenger / Car ferry

REFERENCE LIST – MARINE

REFERENCE LIST – OFFSHORE

Alibaba Sovereign Oil, UKBalmoral Sun Oil, UKBeatrice B Brit Oil, UKBeryl B Mobil, UKBrent A, B, C, D Shell, UKBuchan BP, UKClaymore A Occidential, UKCleeton BP, UKClyde BP, UKCormorant A & North Shell, UKDan F Maersk, DKDraugen Shell, NOFulmar Shell, UKGoodwyn A Woodside, AUSGullfaks A, B, C Stat Oil, NO

Heidrun Conoco, NOHibernia HMDC, CATreasure Hunter Wilhelmsen, NOTroll Shell, NOTyra Danbor, DKValentin Shaskin State Owned, RUVenture SOEP, CAMISP Prirazlomnaya Sevmash, RUJotun Mobil, NOMaccullogh BP, UKMad Dog BP, USAMagnus BP, UKMichael Mirsksinks State Owned, RUMolinpaq Marathon, USAN´Kossa Elf Congo, FR

REFERENCE LIST – OFFSHORE

Oseberg A, B, C Norsk Hydro, NOSafe Gothia Consafe, SESafe Karinia Consafe, SEShell B.D Shell, UKShell C.D Shell, UKShip 137 British Gas, UKSleipner Stat Oil, NOSleipner Vest Stat Oil, NOStatfjord A, B, C Stat Oil, NoTartan A Texaco, UKThebaud SOEP, CAThames Arco Arco, UKULA BP, NOValhall Amoco, NOVesiefrikk Stat Oil, NO

REFERENCE LIST – OFFSHORE

HTTP://WWW.FIRESEAL.COM

INSTALLATIONGUIDES

APPROVALS

MATERIAL SAFETYDATA SHEETS