View
217
Download
0
Category
Preview:
Citation preview
KFT.05.801.20000.B
Mounting InstructionsTWISTED THROTTLE products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. TWISTED THROTTLE takes no responsibility for damages caused by improper installation.
All screws, bolts, and nuts, including all replace-ment hardware provided by TWISTED THROTTLE should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used:
M5...........................................3.5 ft-lbs (5 Nm) M6...........................................7 ft-lbs (9.6 Nm) M8..........................................13 ft-lbs (18 Nm)
All screws, bolts, and nuts should be checked after driving the first 30 miles (50 km) to ensure that all are tightened to the proper torque.
Medium strength liquid thread-locker (i.e., "Locktite") should be used to secure all screws, bolts, and nuts.
Evo-SidecarrierSuzuki DR-Z 400 S 00-,400 SM 05-
Twisted Throttle LLC1080 Kingstown Rd, Building 1Peace Dale, RI 02879
phone: 401.284.4200fax: 401.223.6955www.twistedthrottle.com
2 Quick LockFastener
CAM.2312S21-12AHNV
Pieces...................8
1Evo-Sidecarrier
KFT.84.012.961/962Pieces............2(L/R)
3 RetainingRing
CAM.2312S10-1BPPieces...................8
5 Spacer
Da:18, Di:8.4, h:12 Pieces...................2
4 Front RightFixing Lug
KFT.84.012.002Pieces...................1
7 Hex HeadScrew
M8 x 30......DIN 931Pieces...................2
6 Washer
M8, StandardPieces...................4
9 Spacer
Da:20, Di:06.4, h:45Pieces...................2
8 Top Fixing Lug
KFT.00.061.001Pieces...................2
11 Hex HeadScrew
M6 x 70......DIN 931Pieces...................2
10 Washer
M6, StandardPieces...................4
13 Lock Nut
M6...........DIN 6927Pieces...................2
12 CenterFixing Lug
KFT.84.012.003Pieces...................1
14 Spacer
Da:20, Di:8.2, h:06Pieces...................2
16Rear Fixing Lug
KFT.00.061.004Pieces...................1
15 Hex Head Screw
M6 x 30......DIN 931Pieces...................4
17 Lens Head Screw
M6 x 20....DIN 7380Pieces...................2
18 Front LeftFixing Lug
KFT.84.012.001Pieces...................1
19 Hex HeadScrew
M8 x 20......DIN 933Pieces...................2
54
67
9 810
11
17 16
15
10
14
13
12
!!
!
!
!
Driving Direction
Left seat mounting point assembly same as right side shown
If mounting OEM rear rack, spacer #9 is not needed.
3
1
186
19
8
Orig
inal
Har
dwar
e
Orig
inal
Har
dwar
e
Use a coin or screwdriver to detach the quick fasteners of the QUICK-LOCK side carriers.
2
3
!
Recommended