View
97
Download
0
Category
Tags:
Preview:
DESCRIPTION
Depth Gauge. The Saw Tooth: 5 Parts. Depth Gauge: setting height & shape, determines chip thickness, .025 Working point: initiates cut, no chrome damage Side plate: cuts the wood in the cross grain, 5 – 25 degrees forward Top plate: determines kerf width, 20 – 30 degrees - PowerPoint PPT Presentation
Citation preview
Depth Gauge
The Saw Tooth: 5 Parts
1. Depth Gauge: setting height & shape, determines chip thickness, .025
2. Working point: initiates cut, no chrome damage
3. Side plate: cuts the wood in the cross grain, 5 – 25 degrees forward
4. Top plate: determines kerf width, 20 – 30 degrees
5. Chisel angle: underside of top plate, allows chip to smoothly exit, 45 – 55 degrees
Consistency must be maintained around the loop and from left cutters
to right cutters
Working Point
Side Plate Angle
Top Plate Angle
Chisel Angle
Recommended