Day 1 Sritrusta Sukaridhoto. UTP 5e cable/patch Straight-through

Day 1

Sritrusta Sukaridhoto

UTP 5e cable/patch

Straight-through

Crossed-over

Tools

Step-by-step (1)

Skin off the jacket Un-twist each pair Place the order Recheck use

diagram

Step-by-step (2)

Hold the grouped Cut straight all of

the wires

Step-by-step (3)

Insert the wires into connector (pin facing up)

Step-by-step (4)

Push moderately hard to assure that all of the wires have reached the end of the connector

Step-by-step (5)

Place the connector into crimp tool, and squeeze hard so that the handle reaches it’s full swing

Step-by-step (6)

Now go and test it !

Wire map

Cisco Cable system

X21

X21

V35

V35

RS232

Connecting Router to ISP (WAN)

ISP

DCE

DTE

DTEDTE

DCEDCE

ISP

Console Cable

Plug it into console port

Plug Console Cable

Serial Cable into Computer at Serial Port

UTP Cable into Console Port at Router

Console C

able

Plug the FO

Prepare the FO Cable

Plug it into Router and Switch

FO C

able

Dial-UP

Plug Modem into PC using Serial Cable

Plug RJ11 Cable into modem and PABX

Use Adaptor as AC-power

PABX

ServerModem

PC Client

ISP

How-to Dial UP

Use Gnome-ppp (Linux), Dialup networking (Windows)

Username : goodle Password : goodle Number to dial : 101

Wireless-LAN

Turn-on WIFI Get ESSID :

“eepishotspot” Get IP Access Internet

Access Point

PC-Tablet

Laptop

Desktop with Wifi Card PDA

LAN

ESSID : eepishotspot