View
2
Download
0
Category
Preview:
Citation preview
S e r p e n T i n a ®
Curved C louds
Ceiling SyStemS
B e t w e e n u s , i d e a s b e c o m e r e a l i t y ™
S e r p e n t i n a ®
Product: Serpentina Classic with S500 perforation in Silver Satin, WoodWorks™ Ekos® Perforated in Mahogany with Natural Anodized Reveal Trim and Mahogany Peak Decorative Corner
Project: M&I Bank, Tampa, FLArchitect: Ai Collaborative, Inc., Tampa, FL
uniqueAi Collaborative was asked to design an M&I
Bank branch on the ground floor of an existing
downtown Tampa high-rise and one of the
bigger design challenges was to find a way to
take advantage of the two-story atrium space.
The Armstrong Serpentina ceiling system
enabled the utilization of much of the existing
lighting and HVAC due to its mesh-like quality.
Serpentina’s unique form adds scale and
dimension to the 23 foot tall space and conveys
a “fresh,” contemporary aesthetic that is also
visible from the exterior.
Michael M. Puckett
Partner - Ai Collaborative, Inc.
“
”
S e r p e n t i n a ®
dramatic
Product: Serpentina 3-Dimensional Ceiling System with Unper-forated Custom Color Panels
Axiom® Classic 12” Curved Trim and Optima® Open Plan Tegular
Project: CDW Corporation, Vernon Hills, ILArchitect: Partners by Design, Inc., Chicago, IL
The bold use of colors and curves in
an otherwise rectilinear space was
dramatized by the use of an undulating
Serpentina ceiling. The CDW-branded
red stripe was repeated multiple times
throughout the space and accentuated
within the ceiling plane by red waves that
ultimately tie the entire space together.
The curved clouds can also be used as way
finding devices in a space that consists
mainly of open office workstations.
J.T. Garofalo
Project Director - Partners by DESIGN, incorporated
“
”
S e r p e n t i n a ®
classic
Product: Serpentina Waves™ with R062 perforation in WhiteProject: WLC Architects, Inc., Rancho Cucamonga, CAArchitect: WLC Architects, Inc., Rancho Cucamonga, CA
”
“The almost limitless flexibility of the Serpentina
panel system allowed us to subtly work WLC’s
corporate logo into the ceiling of our Studio’s
central gathering space. The classic ‘earth rise’
arcing form has been synonymous with the
name WLC Architects for over 25 years. Now it
lives on in our newly-constructed headquarters.
Jim DiCamillo
President, Principal, Architect, AIA, LEED® AP –
WLC Architects Inc.
S e r p e n t i n a ®
glamorous
Product: Serpentina Classic Ceiling System with Diamond Louver Panels
Project: Museum of Fine Arts, St. Petersburg, FLArchitect: Hellmuth, Obata + Kassabaum, Inc.
We used the Serpentina system as a glamorous
way to filter light and sound, screening the
structural and mechanical systems above
from the public space below. The undulating
perforated panels allow sound to be absorbed
in the acoustically treated roof deck, while
the sparkling aluminum wave profile allows
natural light from the skylights to activate the
two-story marble-floored public space below.
HOK was pleased with how Armstrong’s team
coordinated the project with us, reinforcing
our architecture. They brought their passion
to the ceiling of an important piece of civic
architecture.
Eddie Pabon, AAIA, NOMA, LEED® AP
Associate & Designer - HOK
“
”
7
S e r p e n t i n a ®
radiantWe employed the use of the Serpentina product
at My Panini Restaurant to generate a feeling
of movement emanating from the grill area
of the cook line. Undulating forms radiate out
into the dining area from a radius point at the
Panini Grills, the “core” of the food preparation
area. Surrounded by areas of hard ceiling, the
Serpentina “waves” float free in an area of
ceiling open and exposed to the blacked-out
structure above, further accentuating the feeling
of movement and excitement.
William Jay George, AIA
Director of Design – G6 DESIGN, LLC
“
”
Product: Serpentina® 3-Dimensional Ceiling System in Sherwin-Williams Forget-Me-Not with Perforated Infill Panel R7250
Project: My Panini, Atlanta, GAArchitect: G6 Design LLC, Atlanta, GA
Classic, Semi-Concealed and Waves
Perforated Panel (R042) Perforated Panel (R062)
Vault
Perforated Panel (R188)*** Perforated Panel (S250)*** Perforated Panel (S375)***
Diamond Sheer*/**Not available for Serpentina Waves
Perforated Panel (H250)****
Unperforated Panel (UPA)
Perforated Panel (R042)
Perforated Panel (R250)** Perforated Panel (R375)***
Perforated Panel (S500)** tDiamond Louver*/**Not available for Serpentina Waves
Perforated Panel (R062) Unperforated Panel (UPA)
* Available in Bright Clear Anodized only. Available as standard 2’ x 2’ lay-in panels.
** Laminated acoustical fleece is not available on Perforated Panels R125, S500, R250, Diamond Sheer and Diamond Louver due to open cell percentage.
*** Tech Black, Fine Fissured™ HumiGuard® Plus panels laminated to the back of Serpentina perforated metal panels provide a matching visual for flat areas adjacent to or within a Serpentina ceiling. Available for R188, R375 and S375.
**** H250 Perforation meets NFPA guidelines for above sprinkler systems
◆ Wood-Look finishes only available for Waves and Vault.
Note: Custom colors available. Diamond Louver and Diamond Sheer panels are available in Bright Clear Anodized only.
Color Selection Due to printing limitations, shade may vary from actual product.
Metal Infill Panels
p e r f o r a t i o n S e l e c t i o n * *(1:4 scale shown)
c o l o r S e l e c t i o n
7300 W. SUNNYVIEW AVE.VISALIA, CA 93291TEL 800 642 4334FAX 800 241 6608WEB www.diamondperf.comEMAIL dpmsales@gibraltar1.com
DIAMONDPERFORATED METALS, INC
A GIBRALTAR INDUSTRIES COMPANY
HOLE PATTERN IS ACTUAL SIZE
Pattern: 1/8 X 3/16 CentersPattern Type:
Open Area:Holes PSI:
60 Degree Staggered
41 %33
Hole Type: Round
Finished End Unfinished End
316
332 �1
8
2164
532
316 ** Perforated Panel (R125)
* Custom wood finishes available – Contact Customer Service at 1 877 276 7876 and select options 1-1-2.
White (WH)
Cream (CR)
Haze (HA)
Camel (CM)
Platinum (PL)
Tech Black (BL)
Silver Grey (SG)
Silver Satin (SA)
Champagne Gold (CG)
Wolf (WK)
Vanilla (VA)
Slate (ST)
Gun Metal Grey (MY)
Mica (MC)
Nickel (NK)
Silver Slate (SV)
Wood Look architectural Film Colors (Not available perforated)
Maple (MP)
Elm (EL)
Light Sycamore (LS)
Dark Walnut (DW)
Rosewood (RW)
Dark Sycamore (DS)
Light Cherry (LC)
Light Walnut (LW)
Dark Cherry (DC)
Charcoal Ash (CA)
Standard Colors
Burnished Copper (BC)
Copper Black (CT)
Forged Iron (FR)
Carbon (CB)
Graphite (GR)
Textured Carbon (TC)
Pewter Luster (PR)
Steel Luster (SR)
Textured Colors
Serpentina® Classic
Serpentina W
avesSerpentina Vault
Other Serpentina options available from Armstrong.
Visit armstrongceilings.com/serpentina
Make a dramatic statement with
Serpentina Curved Clouds.
The desired hill, valley or wave
can be configured to fit
your space.
S e r p e n t i n a ®
TechLineSM / 1 877 276 7876
armstrongceilings.com/serpentina
BPCS-3960-1012
LEED® is a registered trademark of the U.S. Green Building Council All other trademarks used herein are the property of AWI Licensing Company and/or its affiliates© 2011 AWI Licensing Company • Printed in the United States of America
Cover: Product: Serpentina® Classic with S500 perforation in Silver Satin
Project: M&I Bank, Tampa, FLArchitect: Ai Collaborative, Inc., Tampa, FL
K e y S e l e c t i o n A t t r i b u t e s
° Only curved metal ceiling system to have Sabins acoustical testing
° Pre-engineered system allows you to create hills, valleys and waves
° Four curved cloud options – Classic, Semi-Concealed, Vault and Waves™
° Waves is available in 60 kitted options
° Large-size panels available as standard item
° XL2 butt-cut cross tee end detail for a faster installation
° Armstrong standard colors plus four metallic paints; custom colors available
° Extruded aluminum/hot dipped galvanized steel performance provides maximum corrosion resistance
a r m s t r o n g . c o m / s e r p e n t i n a
° Latest product information
° Real time selection and specification information
° Contacts – reps, where to buy, who will install
° Online Catalog, Submittal pages and CAD details
° Literature and samples information
1 8 7 7 A R M S T R O N G ( 2 7 6 - 7 8 7 6 )
° Name of your Armstrong Representative
° TechLine – Technical information, detail drawings, CAD design assistance, installation information, other technical services – 8 a.m. to 5:30 p.m. EST, Monday through Friday FAX 1-800-572-8324 or email: techline@armstrongceilings.com
° Product literature and samples – Express service or regular delivery
° Request a personal copy of the Armstrong Ceiling Systems catalog
Recommended