Coordinate Metrology Society Conference Advance Agenda...Renaissance Orlando at SeaWorld As of July...

Renaissance Orlando at SeaWorldAs of July 8, 2019

Advance AgendaThe Premier Conference for 3D Measurement Professionals

Coordinate Metrology Society Conference

Dolphins anD astronauts

TimeActivity Location

Start End

7:00 AM 5:00 PM Boeing-Only Meeting (Boeing Badge Required) Palani A&B

7:00 AM 5:00 PM Siemens-Only Meeting (By Invitation) Nomeus

7:00 AM 5:00 PM Newport News Shipbuilding Meeting (By Invitation) Tarpon A

8:00 AM 5:00 PM Registration/Check-In Open Exhibitors / Speakers Oceans Foyer

8:00AM 5:00 PMExhibitor Hall Open for Set-up

Badge RequiredOceans 1–8

12:00 PM 4:30 PM Training Sponsored by FARO: Ask the AE Tarpon B

12:00 PM 5:00 PMRegistration / Check-In Open

AttendeesOceans Foyer

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

5:30 PM 6:00 PMNew Attendee Orientation

with CMSC Chair Scott SandwithPalani A

6:30 PM 8:30 PM

CMSC Icebreaker Sponsored by

FAROOceans Foyer

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

MONDAY July 22, 2019 CMSC Agenda

TUESDAY July 23, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

6:30 AM 8:30 AM Breakfast Crystal D&E

8:00 AM 2:30 PM Registration Open Oceans Foyer

8:00 AM 8:20 AM Chairman’s Opening Address: Scott Sandwith Oceans 9–12

8:20 AM 9:00 AM Keynote Speaker: Michael Raphael Oceans 9–12

9:00 AM 9:30 AMPresentation: Creating a New Concept in Performance-

Built Sport CatamaransSpeaker: Scott Porta, Porta Performance/FARO

Oceans 9–12

9:00 AM 12:00 PM Training Sponsored by FARO: CAM2 2019 Update Tarpon B

9:00 AM 3:00 PM Training Sponsored by ECM: CMS Certification Prep Walu

9:15 AM 11:45 AM Training Sponsored by Verisurf: Ask the Engineer Veiltail

9:30 AM 10:00 AM

Presentation: Subtle Sources of Error in Laser Trackers Due to Dispersion in the Internal Optical Elements

Speaker: David H. Parker, Parker Intellectual Property Enterprises

Oceans 9–12

9:30 AM 11:30 AM Training Sponsored by NRK: Intro to SpatialAnalyzer Nomeus

10:00 AM 10:30 AM Presentation: Thickness Inspection of Composite Parts

Speaker: Mark Haynes, Spirit AerosystemsOceans 9–12

10:30 AM 5:00 PM CMS Executive Committee Election Polls Open(or vote anytime on personal computer) Oceans Foyer

10:30 AM 11:00 AM

Presentation: Metrology in the R&D for a High Repetition Rate Multi User X-ray

Free-Electron Laser FacilitySpeaker: William Jansma, Argonne National Laboratory

Oceans 9–12

11:00 AM 11:30 AM

Presentation: A Special Target Set for Laser Scanner Spatial Performance Calibration

Speaker: Fangfang Liu, Shanghai Institute of Metrology and Testing Technology

Oceans 9–12

TUESDAY July 23, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

11:30 AM 12:00 PM

Presentation: Part Density Estimation Using a Laser Scanner

Speaker: Joshua Montano, Los Alamos National Laboratory

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-Sponsored by Quality Magazine & GSI Crystal D&E

12:30PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Accurex Oceans 1–8

1:00 PM 3:00 PM Training Sponsored by NRK: Automated Solutions Nomeus

1:00 PM 4:00 PMTraining Sponsored by FARO: RPM–Programming

Repeat Part Inspections in CAM2Tarpon B

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:30 PM 2:00 PM EZ - Spotlight On New Technology: Accurex Oceans 1–8

1:30 PM 4:00 PMTraining Sponsored by Verisurf:

Automating Inspection WorkflowsVeiltail

2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8

3:00 PM 3:30 PM EZ - Spotlight On New Technology: Surphaser Oceans 1–8

3:30 PM 4:30 PM EZ - Ask The Experts: Metrology Applications Oceans 1–8

4:30 PM 5:30 PM EZ - Jeopardy Oceans 1–8

5:00 PM 9:00 PM GSI Users Group Meeting (By Invitation) Palani A

5:00 PM 9:00 PM API Users Group Meeting (By Invitation) Tarpon A

WEDNESDAY July 24, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

5:15 AM 7:30 AM Fun Run Meet at Oceans Porte-Cochere

6:30 AM 8:30 AM Breakfast Co-Sponsored by Brunson Crystal D&E

8:00 AM 4:30 PM Registration Open Oceans Foyer

8:00 AM 8:15 AM Conference Updates: Scott Sandwith Oceans 9–12

8:00 AM 12:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

8:00 AM 4:30 PM CMS Executive Committee Election Polls Open(or vote anytime on personal computer) Oceans Foyer

8:30 AM 9:00 AMPresentation: Metrology Apprenticeship at

Newport News Shipbuilding Speaker: Jessica Walker, Newport News Shipbuilding

Oceans 9–12

9:00 AM 9:30 AM Presentation: DKIST’s Journey of Using a Laser TrackerSpeaker: Shawn Haar, National Solar Observatory Oceans 9–12

9:00 AM 12:00 PM Training Sponsored by 3D Systems: Geomagic Design X Tarpon A

9:00 AM 12:00 PM Training Sponsored by FARO: Introduction to Metrology and Portable CMMs Tarpon B

9:00 AM 3:00 PM Training Sponsored by ECM: CMS Certification Walu

9:15 AM 11:45 AM Training Sponsored by Verisurf:CNC CMM Programming Veiltail

9:30 AM 10:00 AM

Presentation: Noise Filtration of 3D Scanned Data Points in Metrology of Highly Reflective Surfaces

Speaker: Ahmad Barari, University of Ontario Institute of Technology

Oceans 9–12

9:30 AM 11:30 AM Training Sponsored by NRK: What’s New in SpatialAnalyzer Nomeus

10:00 AM 10:30 AMPresentation: Using an Abbreviated Scale Bar

for Abbreviated TestsSpeaker: Vincent Lee, NIST

Oceans 9–12

10:00 AM 12:00 PM PrecisionPath Consortium (By Invitation) Palani B

10:30 AM 11:00 AM

Presentation: Point Density and Fitting Algorithm Interaction in Part Profile Scanning

Speaker: Edward Morse, UNCC Center for Precision Metrology

Oceans 9–12

WEDNESDAY July 24, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

11:00 AM 11:30 AMPresentation: Developing Low Cost Large Volume

Metrology for Next-Generation Manufacturing SpacesSpeaker: Stuart Robson, University College London

Oceans 9–12

11:30 AM 12:00 PM

Presentation: Tracker Kinematics and Uncertainty Using Quaternions

Speaker: John W Dorsey Palmateer, JDP Metrology Consulting LLC

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-sponsored by Bal-tec Crystal D&E

12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Leica Oceans 1–8

1:00 PM 3:00 PM Training Sponsored by NRK: SpatialAnalyzer Measurement Plans Nomeus

1:00 PM 4:00 PMTraining Sponsored by FARO: RPM– Roller Alignment

Techniques Using Laser TrackersTarpon B

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:30 PM 2:00 PM EZ - Spotlight On New Technology: Hexagon, Aicon Oceans 1–8

1:30 PM 3:30 PM Training Sponsored by 3D Systems: Geomagic Control X Tarpon A

1:30 PM 4:00 PM Training Sponsored by Verisurf: Ask the Engineer Veiltail

2:00 PM 3:00 PM Women in Metrology Networking Session Palani A

2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8

3:00 PM 3:30 PM EZ - Spotlight On New Technology: FARO Oceans 1–8

3:30 PM 4:30 PM EZ - Ask The Experts: The Future of Metrology Oceans 1–8

4:15 PM 5:15 PMWomen in Metrology and STEM

Special Guest Dr. Bonnie DunbarPalani A

4:30 PM 5:30 PM EZ - Final Jeopardy Oceans 1–8

5:30 PM 6:30 PM Happy Hour Sponsored by NRK Oceans Foyer

6:30 PM 9:30 PMCMSC Banquet Co-Sponsored by GSI

Featured Speaker: Dr. Bonnie DunbarOceans 9–12

THURSDAY July 25, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End6:30 AM 8:30 AM Breakfast Crystal D&E

8:00 AM 4:00 PM Registration Open Oceans Foyer

8:00 AM 8:15 AM Conference Updates: Scott Sandwith Oceans 9–12

8:00 AM 12:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

8:30 AM 9:00 AMPresentation: Uncertainty Evaluation of Fringe Projection

Based on Linear Systems TheorySpeaker: George Gayton, University of Nottingham

Oceans 9–12

9:00 AM 9:30 AM

Presentation: Computational Challenges for Shop-Floor Laser Radar Commissioning

Speaker: Alexander Schoenberg, FFT - Sensor Technology

Oceans 9–12

9:15 AM 11:45 AM Training Sponsored by Verisurf: Ask the Engineer Veiltail

9:30 AM 10:00 AM

Presentation: Using Coordinate Measurement Machines To Shorten Time To Market For Aerospace Engine

ComponentsSpeaker: David Wick, Zeiss

Oceans 9–12

10:00 AM 10:30 AM

Presentation: Dynamic 3D Measurement of a Deployable Gossamer Antenna Structure Via Multi-Camera

Photogrammetry in Zero GravitySpeaker: Russell Morrison, Geodetic Systems Inc.

Oceans 9–12

10:30 AM 11:00 AMPresentation: Towards Right-Sized Limits: Rationalizing

Build TolerancesSpeaker: Robb Flynn, Electroimpact

Oceans 9–12

11:00 AM 11:30 AM

Presentation: Automated Photogrammetry Robot Calibration and Contour Compensation for Accurate

Cutting OperationsSpeaker: Joe Sabol, Newport News Shipbuilding

Oceans 9–12

TimeActivity Location

Start End

11:00 AM 11:30 AMPresentation: Developing Low Cost Large Volume

Metrology for Next-Generation Manufacturing SpacesSpeaker: Stuart Robson, University College London

Oceans 9–12

11:30 AM 12:00 PM

Presentation: Tracker Kinematics and Uncertainty Using Quaternions

Speaker: John W Dorsey Palmateer, JDP Metrology Consulting LLC

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-sponsored by Bal-tec Crystal D&E

12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Leica Oceans 1–8

1:00 PM 3:00 PM Training Sponsored by NRK: SpatialAnalyzer Measurement Plans Nomeus

1:00 PM 4:00 PMTraining Sponsored by FARO: RPM– Roller Alignment

Techniques Using Laser TrackersTarpon B

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:30 PM 2:00 PM EZ - Spotlight On New Technology: Hexagon, Aicon Oceans 1–8

1:30 PM 3:30 PM Training Sponsored by 3D Systems: Geomagic Control X Tarpon A

1:30 PM 4:00 PM Training Sponsored by Verisurf: Ask the Engineer Veiltail

2:00 PM 3:00 PM Women in Metrology Networking Session Palani A

2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8

3:00 PM 3:30 PM EZ - Spotlight On New Technology: FARO Oceans 1–8

3:30 PM 4:30 PM EZ - Ask The Experts: The Future of Metrology Oceans 1–8

4:15 PM 5:15 PMWomen in Metrology and STEM

Special Guest Dr. Bonnie DunbarPalani A

4:30 PM 5:30 PM EZ - Final Jeopardy Oceans 1–8

5:30 PM 6:30 PM Happy Hour Sponsored by NRK Oceans Foyer

6:30 PM 9:30 PMCMSC Banquet Co-Sponsored by GSI

Featured Speaker: Dr. Bonnie DunbarOceans 9–12

THURSDAY July 25, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

11:30 AM 12:00 PMPresentation: How to Get the Most Accuracy

Out of Your PCMMSpeaker: Aleksandr Bakhtin, Wagstaff Inc

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-Sponsored by GSI Crystal D&E

12:00 PM 12:30 PM

Presentation: Multilateration with Laser Tracker Applied in Large Scale Coordinate Verification

Speaker: Yu Ren, Shanghai Institute of Measurement and Testing Technology

Oceans 9–12

12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Romer Oceans 1–8

1:30 PM 2:30 PM EZ - Ask The Experts: Metrology Principles Oceans 1–8

1:30 PM 4:00 PM Training Sponsored by Verisurf: Large-Scale Metrology Veiltail

2:30 PM 3:30 PM EZ - Special Presentation: Ben Hughes, NPL Oceans 1–8

4:00 PM 5:00 PMCMS All-Member & Exhibitor Happy Hour

and Feedback SessionOceans 1–8

5:30 PM 9:00 PM Exhibition Hall Teardown Oceans 1–8

FRIDAY JULY 26, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

7:15 AM 4:00 PMKennedy Space Center Tour

Bus to and From Kennedy Space Center

Meet at Oceans Porte-Cochere