View
268
Download
2
Category
Preview:
Citation preview
Sika Limited (Vietnam)
Sika Product Information Chart► Concrete Production
► Grouting / Anchoring
► Concrete Repair & Protection
► Structural Strengthening
► Joint Sealing & Elastic Bonding
► Steel Protection
► Waterproofing
► Flooring / Coating
► Roofing
Cons
truct
ion
Sika Limited (Vietnam)
IntroductionSika Limited (Viet Nam) is a wholly owned subsidiary of Sika AG in Switzerland licensed in 1993 to locally produce various range of construction chemical product. Since then, Sika has expanded rapidly, establishing a network to a wide and diverse construction market throughout Vietnam.
The company’s future direction is clearly focused on local production, thus reducing dependence on imported products, which in turn allow greater flexibility and enables Sika to adapt products for the special requirements of the local market.
Sika is proud of its quality products in construction chemical which are carefully tailored to local market needs, in ready mixed concrete plants, precast factories, high rise buildings, industrial zones, cement factories, airports, seaports and infrastructure projects (such as bridges, clean water supply and water treatment plants, hydro & thermal power plants, dykes and dams).
Sika is proud to be the first organization in the construction industry in Vietnam to obtain ISO 9001 certificate.
CONCRETE PRODUCTIONConcrete production (Water Reducers)PC based highrange water reducers Page 4Sika® Viscocrete® HE 500Sika® Viscocrete® HE-10Sika® Viscocrete® 3000-10Sika® Viscocrete® HE-10ATSika® Viscocrete® 3000-20Sika® Viscocrete® SP1000Sika® Viscocrete® 3000Sika® Viscocrete® SP1000 PV
Superplasticizers Page 6Sikament® NNSikament® R4Sikament® 2000 ATSikament® 163 EX-HVSikament® 2000AT (N)Sikament® R4(ER)Sikament® V4Sikament® RMCSikament® NN GBSikament® MP
Plasticizers Page 10Plastiment® 96Plastiment® BV 40Plastiment® TM 25Plastiment® 100
Other admixturesProducts for Shotcrete production Page 11Sigunit® D54-AFSigunit® L53-MY
Durability Enhancers Page 12Plastocrete® NSika® AerSikacrete® PP1
Manufacturing Aids Page 13Sika® Pump
Concrete Essentials Page 13Antisol® EAntisol® SRugasol® F, CSeparol®
Sika Formoil® C
Sika Limited (Vietnam)
CONCRETE REPAIR & PROTECTION
WATERPROOFING
FLOORING / COATING
ROOFING
STRUCTURAL STRENGTHENING
JOINT SEALING & ELASTIC BONDING
Concrete repair: Site batch mortars Page 16Sika® LatexSika® Latex THIntraplast® Z-HV
Concrete repair: Ready to use mortar Page 17Sika® MonoTop® 610Sika® MonoTop® 615 HBSika® MonoTop® RSika Refit® 2000Sikagard® 75 EpoCem®
Rigid waterproofing Page 24SikaTop® Seal 107Sikalite®
Sika® 102Sika® Plug CN
Elastic Waterproofing Page 25Sikaproof® Membrane
Joints (water retaining structures) Page 25Sika - Hydrotite CJ-TypeSika® Waterbars
Membranes (water retaining structures) Page 26BC Bitumen CoatingSika® Bituseal-T140-mg-0°C (SA)Sika® Bituseal-T140-sg-0°C (SA)Sika® Bituseal-T130-sg-0°C (SA)
Resin floor and coating Page 27Sikafloor®-2530W NewSikafloor®-381Sika® Extender TSikafloor®-161Sikafloor®-263 SLSikafloor®-264
Epocem floor Page 29Sikafloor®-81 EpoCem®
Sikafloor®-21 PurCem® FG
Cementitious floor Page 29Sikafloor® Chapdur®
Sikafloor®-2 Syn Top
Liquid Applied MembraneSikalastic® -450 Page 30
PVC MembraneSika® Sarnafil® Page 30
Structural Strengthening Page 19Sika® Carbodur® PlatesSikadur®-30Sikadur®-30 LPSikadur®-330SikaWrap®-230 C/45
Rigid bonding Page 21Sikadur® 731Sikadur® 732Sikadur® 752
Façade joint Page 22Sikaflex® Pro-3WFSikaflex® Construction (AP)Sika® Primer-3 NSikaflex® 11 FC
Elastic Bonding Page 23SikaBond® T55(J)
STEEL PROTECTIONSteel protection Page 23Sika® Poxitar F
GROUTING / ANCHORINGCementitious grouts Page 15SikaGrout® 212-11/214-11SikaGrout® 214-11 HSSikaGrout® GP
Resin grouts Page 16Sikadur® 42MP
Back filing & stabilization Page 16Sika® Rokkon (C-VN)
Sika Product Information Chart
Sika Limited (Vietnam)
Conc
rete
Pro
duct
ion
Sika® Viscocrete® HE-500
Sika® Viscocrete® HE-10
Sika® Viscocrete® 3000-10
Ultra high range water-reducing concrete admixture
Ultra high range water-reducing concrete admixture
High range water-reducing admixture
Use ► Mainly suitable for the manufacture of concrete in precast factories.
► Excels by its extremely high water reduction capacity, providing good flowability while retaining optimal cohesion of the mix.
Consumption / Dosage / Density ► For soft/plastic concrete: 0.5 - 0.8 ltr per 100 kg of cement
► For SCC concrete: 0.9 - 1.8 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type F
Packaging ► 1000 ltr/ 200 ltr / 25 ltr / 5 ltr
Use ► Mainly suitable for the manufacture of concrete in precast factories.
► Excels by its extremely high water reduction capacity, providing good flowability while retaining optimal cohesion of the mix.
Consumption / Dosage / Density ► For soft/plastic concrete: 0.5 - 0.8 ltr per 100 kg of cement
► For SCC concrete : 0.9 - 2.0 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type F
Packaging ► 1000 ltr / 200 ltr / 25 ltr / 5 ltr
Use ► Mainly suitable for the manufacture of concrete for RMC and precast batching plants.
► Excels by its extremely high water reduction capacity, providing good flowabilty while retaining optimal cohesion of the mix.
Consumption / Dosage / Density ► 0.7 - 2.5 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type G
Packaging ► 1000 ltr / 200 ltr / 25 ltr / 5 ltr
Sika Product Information Chart 2011 5
Conc
rete
Pro
duct
ion
Sika® Viscocrete® HE- 10ATUltra high range water-reducing concrete admixture
Use ► Multipurpose admixture for the manufacture of high performances pre-cast and cast-on-site concretes.
► Excels by its extremely high water reduction capacity, providing good flowability while retaining optimal cohesion of the mix.
Consumption / Dosage / Density ► For soft/ plastic concrete: 0.5 - 0.8 ltr per 100 kg of cement
► For SCC concrete 0.9 - 1.8 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type F & G
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika® Viscocrete® 3000-20High range water-reducing admixture
Use ► Mainly suitable for the manufacture of concrete for RMC and precast batching plants.
► Excels by its extremely high water reduction capacity, providing good flow abil ity while retaining optimal cohesion of the mix.
Consumption / Dosage / Density ► Soft concrete: 0.7 - 2.5 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM type G
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika® Viscocrete® SP 1000Ultra high range water-reducing concrete admixture
Use ► Mainly suitable for the manufacture of concrete in precast factories.
► Excels by its extremely high water reduction capacity, providing good flowability while retaining optimal cohesion of the mix.
Consumption / Dosage / Density ► For soft concrete: 0.5 - 0.9 ltr per 100 kg of cement► For spun piles: 0.6 - 0.9 ltr per 100 kg of cement► For SCC concrete: 0.9 - 2.0 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM type F and G
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika Limited (Vietnam)
Conc
rete
Pro
duct
ion
Sikament® NNHigh range water-reducing concrete admixture
Use ► Used as a superplasticizer in the production of flowable concrete.
► Used as a water-reducing agent leading to high early strength concrete.
Consumption / Dosage / Density ► 0.6 - 2.0 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type F
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika® Viscocrete® 3000High range water reducing admixture.
Use ► Mainly suitable for the manufacture of concrete for RMC and precast batching plants.
► Excels by its extremely high water reduction capaci ty, providing good flow ability while retaining optimal cohesion of the mix.
Specifications / Test reports ► Complies with ASTM C 494 Type G
Packaging ► 200 ltr / 25 ltr / 5 ltr
Sika® Viscocrete® SP 1000 PVUltra high range water reducer with hardening acceleration effect concrete admixtureUse ► Mainly suitable for the manufacture of concrete in
precast factories.► Excels by its extremely high water reduction
capacity, providing good flowability while retaining optimal cohesion of the mix.
Consumption / Dosage / Density ► 1.090-1.110 kg/ lít
Specifications / Test reports ► Complies with ASTM type F and G
Packaging ► 200 ltr / 25 ltr / 5 ltr
Sika Product Information Chart 2011 7
Conc
rete
Pro
duct
ion
Sikament® R4High range water-reducing and set retarding concrete admixture
Use ► Superplasticizer is used for flowable and site batch concrete
Consumption / Dosage / Density ► 0.6 to 1.6 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM type D and G
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sikament® 2000 ATHigh range water-reducing and set retarding concrete admixture
Use ► Used especially for high strength concrete that needs long lasting slump retention under hot climate condition.
Consumption / Dosage / Density ► 0.6 - 1.2 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type G
Packaging ► 1000 ltr / 200 ltr / 25 ltr / 5 ltr
Sikament® 163 EX-HVHigh range water-reducing concrete admixture
Use ► As a superplastiziser, Sikament® 163 EX HV is used for flowing concrete
► As a substantial water-reducing agent, Sikament®
163 EX HV is used where high early and ultimate strength is required
Consumption / Dosage / Density ► 0.6 - 1.4 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 type A and F
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika Limited (Vietnam)
Conc
rete
Pro
duct
ion
Sikament® V4High range water-reducing and set retarding concrete admixture
Use ► Superplasticizer is used for flowable concrete.
Consumption / Dosage / Density ► 0.6 - 1.10 ltr per 100 kg of cement.
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sikament® 2000 AT (N)High range water-reducing and set retarding concrete admixture
Use ► Used especially for high strength concrete that needs long lasting slump retention under hot climate condition.
Consumption / Dosage / Density ► 0.60 - 1.50 ltr per kg of cement
Specifications / Test reports ► Complies with ASTM C-494 type G
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sikament® R4 (ER)High range water-reducing and very long set retarding concrete admixtureUse ► Used as a superplasticizer and set-retarding
admixture in structural and mass concrete where long lasting slump and a controlled extension of setting time is required.
Consumption / Dosage / Density ► 0.4 - 1.2 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type D and G
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika Product Information Chart 2011 9
Conc
rete
Pro
duct
ion
Sikament® RMCHigh range water-reducing and set retarding concrete admixture
Use ► Superplasticizer is used for flowable concrete, at high dosages very good slump keeping for diaphragm walls.
Consumption / Dosage / Density ► 0.6 - 2.0 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type G
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sikament® NN GBHigh range water-reducing concrete admixture
Use ► Used as a water reducer in the production of gypsum boards.
► Used as a water-reducing agent leading to high early strength concrete.
Consumption / Dosage / Density ► 0.60 – 2.00 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C494 Type F
Packaging ► 200 ltr / 25 ltr / 5 ltr
Sikament® MPHigh range water-reducing and set retarding concrete admixture
Use ► Used as a superplasticizer and set-retarding admixture in structural and mass concrete where long lasting slump and a controlled extension of setting time is required.
Consumption / Dosage / Density ► 0.60 – 1.80 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C494 Type D & G
Packaging ► 200 ltr / 25 ltr / 5 ltr
Sika Limited (Vietnam)
Conc
rete
Pro
duct
ion
Plastiment® TM 25Water-reducing and set retarding concrete admixtures
Use ► Used in structural and mass concrete where long setting times and improved workability are required suitable Roller compacted concrete.
Consumption / Dosage / Density ► 0.5 - 4.0 ltr per 100 kg of cementitious
Specifications / Test reports ► Complies with ASTM C-494 Type B and D
Packaging ► 25 ltr/ 200 ltr (drums) and 1000 ltr (PVC tank)
Plastiment® 96Water-reducing and set retarding concrete admixture
Use ► Used in structural and mass concrete where long setting times and improved workability are required.
Consumption / Dosage / Density ► 0.20 - 1.0 ltr per 100 kg of cement.
Specifications / Test reports ► Complies with ASTM C-494 Type D
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Plastiment® BV 40High range water-reducing admixture
Use ► Used whenever high quality structural concrete is required.
Consumption / Dosage / Density ► 0.30-0.60 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type A
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika Product Information Chart 2011 11
Conc
rete
Pro
duct
ion
Plastiment® 100Water-reducing and set retarding concrete admixture
Use ► Used in structural and mass concrete where long setting times and improved workability are required.
Consumption / Dosage / Density ► 0.2 to 0.6 ltr per 100 kg of cement.
Specifications / Test reports ► Complies with ASTM type D.
Packaging ► 1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr.
Sigunit® D54-AFAlkalifree powder accelerator shotcrete admixture
Use ► A set accelerator suitable for dry spray applications.
Consumption / Dosage / Density ► 2.0-6.0% by weight of cement
Packaging ► 20 kg/ bag
Sigunit® L53-MYAlkalifree liquid accelerator shotcrete admixture
Use ► A set accelerator suitable for wet and dry spray application.
Consumption / Dosage / Density ► 2.0 - 6.0% by weight of cement, depends on shotcrete process
Packaging ► 200 ltr/ pail; 1000 ltr/ plastic tank
Sika Limited (Vietnam)
Conc
rete
Pro
duct
ion
Plastocrete® NWaterproofing admixture
Use ► Recommended for use in structural and mass concrete, particularly water-retaining structures.
Consumption / Dosage / Density ► 0.30-0.50 ltr per 100 kg of cement
Specifications / Test reports ► Complies with ASTM C-494 Type A
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Sika® AerAir-entraining agent
Use ► Used to produce easily workable and durable concrete for:- Dams and reservoirs- Roads- Runways and taxiways- Mass concrete structures
Consumption / Dosage / Density ► 0.03 - 0.30 ltr per 100 kg of cement
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Sikacrete® PP1Concrete additive
Use ► Used in structural concrete, precast concrete, and other fields of concrete construction where extra demands are made on the quality of fresh and hardened concrete.
Consumption / Dosage / Density ► 5 - 10% by weight of cement
Specifications / Test reports ► Test report are available
Packaging ► 20 kg/ bag
Sika Product Information Chart 2011 13
Conc
rete
Pro
duct
ion
Antisol® EConcrete curing compounds based on emulsified paraffin
Use ► Used mainly for structural concrete surfaces where subsequent surface treatments will not be required, for example, fare-face concrete.
► Sprayed onto newly laid concrete surfaces to form a thin film barrier against premature water loss. Without disturbance to the normal setting action, the concrete is then allowed to cure and achieve maximum properties. Antisol® E is especially suitable for trafficable surfaces and in large areas of exposed concrete.
Consumption / Dosage / Density ► 4 - 6 m2/ ltr
Specifications / Test reports ► Complies with ASTM C-309 Type 1 class A
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Sika® PumpUniversal pumping additive
Use ► Sika® Pump is recommended for concrete mixes with varying fines content, low cement content or unsatisfactory aggregate grading. These conditions tend to cause bleeding of the fresh concrete, leading to segregation during pumping which tends to lead to extremely high pump pressures.
► The use of Sika® Pump also allows for secondary raw materials such as aggregates derived from excavation or demolition work to be utilized.Concrete made with this type of aggregate can be pumped without excessive pump pressure.
Consumption / Dosage / Density ► 0.2 - 1.0 ltr per 100 kg of cement
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Antisol® SConcrete curing compounds based on metallic silicates
Use ► Particularly recommended for the treatment of vertical surfaces which are to receive subsequent treatments where resin based curing membranes would be unsuitable because of their uncertain film breakdown, and the effect on the performance of further surface treatments.
► May be applied to “green” concrete to increase the density of the cured surface thus improving its subsequent durability.
Consumption / Dosage / Density ► 4 - 5 m2/ ltr
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Sika Limited (Vietnam)
Conc
rete
Pro
duct
ion
Sika Formoil® CChemical form release agent
Use ► Form release agent for steel and wooden formwork ► Sika® Formoil C facilitates removal and cleaning of
shuttering.► It shall be diluted with water prior to use.
Consumption / Dosage / Density ► ~ 0.86 kg/ ltr
Packaging ► 200 ltr / 25 ltr / 5 ltr
Separol®
Chemical form release agent
Use ► Form release agent for steel and wooden formwork. Separol facilitates removal and cleaning of shuttering. Number of lifts is substantially increased.
Consumption / Dosage / Density ► Wood surface: approx 21 m2/ ltr► Metal surface: approx 42m2/ ltr
Packaging ► 200 ltr / 25 ltr / 5 ltr
Rugasol® F, CConcrete surface retarders
Use ► Surface retarders have been specifically designed for the production of exposed aggregate finishes or for producing a mechanical key to construction joints, stop ends, or subsequent rendering applications.
► Normally supplied in two standard grades: - Rugasol F: Low viscosits paste retarder for application
to formwork to produce exposed aggregate work. - Rugasol C: Liquid retarder for horizontal construction
joints and surfaces.
Consumption / Dosage / Density ► 0.25 - 0.3 kg/ m2
Packaging ► Rugasol C: 200 ltr/ 25 ltr/ 5 ltr► Rugasol F: 15 kg/ can
Sika Product Information Chart 2011 15
Grou
ting
/ Anc
horin
g
SikaGrout® 212-11/214-11Non-shrink, pumpable, cementitious grout
Use ► SikaGrout® 212-11 and SikaGrout® 214-11 are suitable for the following grouting works: - Machine foundations - Rails beds - Columns in precast construction - Anchor bolts - Bridge bearings - Cavities - Gaps - Recesses - High strength repair
Consumption / Dosage / Density ► Approx. 76 bags for 1 cubic meter of wet mortar
Specifications / Test reports ► Local certificate is available
Packaging ► 25 kg/ bag
SikaGrout® 214-11 HSNon-shrink, high early strength, cementitious grout
Use ► The high early strength property is suitable for work that requires early loads including machine bases structural columns, prestressed girders, bridge bearings, rail posts and seatings bolts etc.
Consumption / Dosage / Density ► Approx. 77 bags for 1 cubic meter of wet mortar
Specifications / Test reports ► Local certificate is available
Packaging ► 25 kg/ bag
SikaGrout® GPNon-shrink, pumpable, general purpose cementitious grout
Use ► Suitable for the following grouting works: - Machine foundations (non vibrating) - Rails beds - Columns in precast construction - Anchor bolts - Bridge bearings - Cavities - Gaps - Recesses - Concrete repair
Consumption / Dosage / Density ► Approx. 76 bags for 1 cubic meter of wetmortar
Specifications / Test reports ► Local certificate is available
Packaging ► 25 kg/ bag
Sika Limited (Vietnam)
Grou
ting
/ Anc
horin
g
Sika® Rokkon (C-VN)Cementitious cartridge for rock bolting
Use ► Used for grouting rockbolts for strata reinforcement in tunneling and mining to reduce roof collapses.
Packaging ► 20 cartridges/ box (38 mm diameter)
Sika® LatexBonding agent and waterproofing admixture
Use ► Sika® Latex is a high quality emulsion that substantially increases the qualities of cement mortars, such as:
- Bonding slurry - Thin layer patching mortars - Waterproofing renders - Floor screeds - Concrete repair mortar - Abrasion resistant linings - Tile fixing mortars - Masonry mortars
Consumption / Dosage / Density ► 1.02 kg/ ltr
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Sikadur® 42 MP3-component epoxy resin castable grout
Use ► Self – levelling, Flowable epoxy mortar on concrete, stone, steel, aluminium, asbestos cement, wood, polyester and epoxy
Consumption / Dosage / Density ► 2.13 kg/ ltr
Packaging ► 12 kg set (A+B+C)► Industrial packaging on request
Conc
rete R
epair
& Pr
otecti
on
Sika Product Information Chart 2011 17
Conc
rete
Rep
air &
Pro
tect
ion
Sika® Latex THBonding agent and waterproofing admixture
Use ► A high quality emulsion that substantially improve the qualities of cement mortars, such as:- Bonding slurry - Thin layer patching mortars- Waterproofing renders- Floor screeds- Concrete repair mortar- Abrasion resistant linings- Tile fixing mortars- Masonry mortars
Consumption / Dosage / Density ► 1.01 kg/ ltr
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Use ► A special product for the production of grouting mortar, backfilling mortar, and rock and soil anchoring.
Consumption / Dosage / Density ► Typical 0.4-0.8% by weight of cement for slurry
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Intraplast® Z-HVShrinkage compensating and plasticizing admixture
Use ► As a treatment for preventing continued corrosion of reinforcement in concrete and as a bonding bridge for concrete repair using the Sika® MonoTop® concrete repair mortars.
Consumption / Dosage / Density ► Bonding: 1.5 - 2.0 kg/ m2
Specifications / Test reports ► Local test report is avaliable
Packaging ► 25 kg/ bag
Sika® MonoTop® 610Bonding slurry and reinforcement corrosion protection
Sika Limited (Vietnam)
Use ► Fast repairs to horizontal and vertical concrete or mortar surfaces above and below ground level.
► Filling/ repair mortar for voids, honeycombed areas, etc.► Repair of spalled concrete caused by reinforcement
corrosion.► Repairs with improved resistance to oils, sewage,
chemicals, etc.
Consumption / Dosage / Density ► Approximately 75 bag yields approx. 1 cubicmeter of mortar
Specifications / Test reports ► Local test report is avaliable
Packaging ► 25 kg/ bag
Sika® MonoTop® RHigh performance polymer modified repair mortar
Use ► Used as repair mortar for minor surface defects► A cosmetic mortar designed to eliminate surface
defects due to demoulding, pores or honeycombs, and is suitable for small repairs.
► As levelling mortar and fairing coat or finishing skim coat to concrete, mortar patches and screeds.
Consumption / Dosage / Density ► Approximately 82 bag yields approx. 1 cubicmeter of mortar
Packaging ► 20 kg/ bag
Sika Refit® 2000Mortar for cosmetic concrete surface repair and fairing coat
Conc
rete
Rep
air &
Pro
tect
ion
Use ► Fast repair to overhead, horizontal or vertical concrete or mortar surfaces above and below ground level.
► Filling/ repair mortar for voids, honeycombed areas, etc.
► Repair of spalled concrete caused by reinforcement corrosion.
► Repairs with improved resistance to oils, sewage, chemicals, etc.
Consumption / Dosage / Density ► Approx. 60 bags yield 1 cubic meter of mortar
Specifications / Test reports ► Local test report is avaliable
Packaging ► 25 kg/ bag
Sika® MonoTop® 615 HBHigh build polymer modified repair mortar
Sika Product Information Chart 2011 19
Conc
rete
Repa
ir & P
rotec
tion
Use ► For coatings 1.0 –2.0 mm thick:- On concrete, mortar, stone- As a thin sealer coat for vertical and horizontal
surfaces- For making good spalled and pitted concrete,
blowholes, honeycombs- For filling in joints and making good surface
irregularities- Temporary moisture barrier for epoxy/ polyurethane
basis flooring system,
Consumption / Dosage / Density ► Approx. 2-4 kg/ m2 per 1 - 2 mm thickness
Specifications / Test reports ► International certificate is available
Packaging ► 24 kg/ set (A+B+C)
Sikagard® 75 EpoCem®
Superfine epoxy-cement sealing mortar
Stru
ctur
al St
reng
then
ingSika® Carbodur® Plates
Pultruded carbon fiber plates for structural strengthening
Use ► To strengthen structures for: - Load increase - Damage to structural elements - Service improvements - Change in structural system - Change of specification - Design or construction defects
Consumption / Dosage ► Refer datasheet
Packaging ► See data sheet
Sikadur® 30Adhesive for bonding reinforcement
Use ► Adhesive for bonding structural reinforcement, particularly in structural strengthening works. Including: - Sika® CarboDur® Plates to concrete, brickwork
and timber (for details see the Sika® CarboDur® Product Data Sheet).
- Steel plates to concrete (for details see the relevant Sika® Technical information).
Packaging ► 6 kg/ set
Sika Limited (Vietnam)
Stru
ctur
al S
treng
then
ing
Sikadur® 330 2-part epoxy impregnation resin
Use ► Impregnation resin for SikaWrap® fabric reinforcement for the dry application method
► Primer resin for the wet application system► Structural adhesive for bonding Sika® CarboDur®
Plates to even surfaces
Consumption / Dosage / Density ► Mixed Resin: 1.31 kg/ ltr (at +23°C)
Packaging ► Standard: 5kg/ set► Industrial:
- Part A: 24 kg pails- Part B: 6 kg pails
SikaWrap®-230 C/45Woven carbon fiber fabric for structural strengthening
Use ► Strengthening of reinforced concrete structures, brickwork and timber in case of flexural and shear load.
Consumption / Dosage / Density ► 1.76 g/ cm3
Packaging ► See data sheet
Sikadur® 30 LPAdhesive for bonding reinforcement
Use ► Adhesive for bonding structural reinforcement, particularly in structural strengthening works. Including:- Sika® CarboDur® Plates to concrete, brickwork,
timber and steel (for details see the Sika®
CarboDur® Product Data Sheet)- Steel plates to concrete (for details see the
relevant Sika® Technical information).
Packaging ► 6 kg/ set
Sika Product Information Chart 2011 21
Stru
ctur
al S
treng
then
ing
Sikadur® 731Thixotropic 2-component epoxy resin adhesive
Use ► Thin firm bonding► Can be used on concrete, steel, ceramics, iron,
aluminum, wood, glass, polyester & epoxy► Concrete repairs► Blow hole filling► Starter bar adhesive► Crack and surface sealing
Consumption / Dosage / Density ► Specific gravity: ~ 1.7 kg/ ltr
Packaging ► 1 kg/ 2 kg/ set
Sikadur® 7322-component epoxy resin bonding agent
Use ► To permanently bond freshly mixed mortar or concrete to hardened concrete, glazed bricks, tiles, steel or other structural materials.
► Sikadur® 732 is also used to seal hair lines cracks and as a protective coating to steel parts i.e. anchor plates.
Consumption / Dosage / Density ► Specific gravity: ~ 1.4 kg/ ltr► Bonding : 0.3 - 0.8kg/m2
Packaging ► 1 kg/ 2 kg/ set
Sikadur® 752Low viscosity 2-component injection resin
Use ► Used to fill and seal cavities and cracks in structural components such as columns, beams, foundations, decks and water-retaining structures. It not only forms an effective barrier against water infiltration, bu t a lso bonds the concrete sections, together, thereby restoring original structural strengths.
Consumption / Dosage / Density ► Specific gravity : ~ 1.1kg/ltr
Packaging ► 1 kg / 2 kg/ set
Sika Limited (Vietnam)
Sikaflex® Pro-3WFElastic polyurethane sealant with a movement capacity of 25%
Sikaflex® Construction (AP)1-Part polyurethane sealant for building joints
Use ► Versatile and therefore suitable for various fields of use. Design of joints must be matched to the individual conditions of the project.
Consumption / Dosage / Density ► Depend on joint size.
Specifications / Test reports ► Report for use in waste water plants and contact with food.
Packaging ► 600 ml / sausage
Use ► used as a general purpose sealant for sealing joints in building construction such as movement and construction/isolation joints around windows and doors, facades, claddings etc. in concrete, brick, wood, metal and PVC sections and structures etc.
Consumption / Dosage / Density ► ~ 1.30 kg/ ltr (colour concrete grey)
Specifications / Test reports ► ISO 11600 (Type F Class 25HM/20LM)
Packaging ► 600 ml sausages, 20 sausages per box.
Use ► Primer on porous substrate for Sikaflex® Construction (AP), Sikaflex® PRO-3WF, Sikaflex®-15LM and Sikaflex®-221 joint sealants.
Consumption / Dosage / Density ► ~ 150 g/ m2
Packaging ► 1 ltr/ tin
Sika® Primer-3 NPrimer for joint sealant
Join
t Sea
ling
& El
astic
Bon
ding
Sika Product Information Chart 2011 23
Join
t Sea
ling
& El
astic
Bon
dingSikaflex® 11 FC
1 – part moisture curing, polyurethane adhesive sealant
Use ► Joints in the construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement. - Connection joints between floors / stairs and wall. - Connection joints between floor and machinery. - Seam sealing/ sealing of pipe ducts/ ventilation
systems. - Multi purpose in metal and wood construction work.
Consumption / Dosage / Density ► 1.30 kg/ ltr
Packaging ► 310 ml/ cartridge
SikaBond® T55(J)Timber flooring adhesive
Use ► Is an elastic timber flooring adhesive suitable for bonding parquetry strip floor panels to concrete or timber floors (both new or existing), or as an underlay prior to timber flooring.
Consumption / Dosage / Density ► 1.35kg/ ltr
Packaging ► 2 kg pack/ 16kg pail/ 600 ml pack
Sika® Poxitar FHeavy duty epoxy anthracene oil combination coating for steel and concreteUse ► Suitable for concrete and steel, especially in case of
application onto damp surfaces; also as an internal and external coating for buried and submerged structures,e.g. sewage systems, chemical industry etc.
► Not suitable for surfaces in contact with drinking water, housing, stables etc.
Packaging ► 10 kg per set (component A + B) - Component A : 8.50 kg pail - Component B : 1.50 kg pail
Stee
l Pro
tect
ion
Sika Limited (Vietnam)
Wat
erpr
oofin
g
SikaTop® Seal 107
Sikalite®
Flexible protective and waterproofing slurry
Waterproofing admixture for mortar with extended workability
Use ► Used for external and internal water-proofing, repair work.
Areas of application: - Potable water tank - Basements -Terraces and balconies - Bridges - Retaining walls - Sealing hairline cracks, not subjected to movement.
Consumption / Dosage / Density ► 1.5 - 2.0 kg/ m2 per coat
Specifications / Test reports ► Local and international test reports available
Packaging ► 25 kg/ set
Use ► Sikalite forms the basis for the Sika render system which is most suitable for the waterproofing of masonry structures and mortar where hydrostatic pressure is not apparent.
Consumption / Dosage / Density ► 1 - 2% by weight of cement
Packaging ► 200 ltr/ 25 ltr/ 5 ltr
Sika® 102Waterplug, fast setting, cementitious mortar
Use ► To stop pressure leaks and seepage through rock and concrete as well as through joints between concrete and steel (bolt surroundings, ducts, sheetpiles etc.) in subways, culverts, tunnels, dams, basements, pools.
Packaging ► 2 kg/ 5 kg/ bag
Sika Product Information Chart 2011 25
Wat
erpr
oofin
g
Sika® Plug CNWaterplug, fast setting, cementitious mortar
Use ► To stop pressure leaks and seepage through rock and concrete as well as through joints between concrete and steel (bolt surroundings, ducts, sheetpiles etc.) in subways, culverts, tunnels, dams, basements, pools.
Packaging ► 1 kg/ bag
Sikaproof® MembraneHighly elastic waterproofing liquid membrane
Use ► Below grade waterproofing of concrete and masonry surface
► Flat roofs► Balconies► Basement etc.► Wall damp proofing
Consumption / Dosage / Density ► 2.0 kg/ m2 (for dryfilm thickness of 1.1 mm)
Specifications / Test reports ► Complies with ASTM D 1227
Packaging ► 18 kg/ pail
Sika - Hydrotite CJ - TypeA hydrophilic rubber combination material for sealing site formed concrete jointsUse ► Is hydrophilic rubber sealing used extensively
throughout the construction industry to seal joints between precast concrete units, steel and other materials.
► Developed as an effective, simple and economical sealing material for site formed contruction joints.
Specifications / Test reports ► Local test report available
Packaging ► 10 m/ roll
Sika Limited (Vietnam)
Wat
erpr
oofin
g
Sika® WaterbarsFlexible PVC waterstop
Use ► For the effective sealing of concrete construction and expansion joints in structures such as: - Basements - Water reservoirs - Sewage treatment plants - Swimming pools - Retaining walls - Lift shafts - Tunnels, culverts - Service pits
Specifications / Test reports ► Local test certificates available
Packaging ► 20 m/ 15m/ roll
BC Bitumen CoatingBituminous waterproofing basecoat
Use ► To provide a waterproof membrane on structural reinforced concrete not exposed to UV, for example retaining walls.
► As a priming coat for bituminous membranes.
Specifications / Test reports ► Priming coat: 0.075 – 0.1 kg/m2 (dilute 1:1 with clean water)
► Neat coat: 0.6 kg/m2
Packaging ► 20 kg pails and 200 kg drums
Sika® Bituseal T140SG/T140MG/T130SG4 mm thick, torch-on sheet waterproofing membrane based on APP modified, reinforced bitumen, with slate finish – Flexible to 0°C
Use ► Waterproofing on flat and exposed roofs.► Waterproofing and damp-proofing of the exterior
walls of base-ments against percolating water and damp soil.
► Waterproofing of retaining walls.► Waterproofing on flat roofs under protective layers
or ballast.► Waterproofing on flat and exposed roofs and under
tiles.► Waterproofing on balconies/terraces under tiles.
Packaging ► 10m / roll
Sika Product Information Chart 2011 27
Floo
ring
/ Coa
ting
Sikafloor® - 2530W NewWater dispersed, colored floor sealer
Use ► For the production of colored sealing coats for light and medium exposure. On concrete, cement screed, epoxy mortar fiber cement boards, e.g. in production and storage halls, show rooms, garages, wet rooms, civil defense facilities. As deicing salt protection on tunnel walls and galleries not exposed to weathering.
Consumption / Dosage / Density ► See data sheet
Packaging ► 10 kg/ set
Sikafloor® - 3812-part highly chemically and mechanically resistant self smooth-ing epoxy coating
Use ► Chemically and mechanically highly resistant coating for concrete and screed surfaces in bund areas for protection against water contaminating liquids (according to the product chemical resistance table)
Consumption / Dosage / Density ► Part A: ~ 1.77 kg/ ltr (DIN EN ISO 2811-1)► Part B: ~ 1.04 kg/ ltr► Mixed resin: ~ 1.6 kg/ ltr► All Density values at +23°C
Packaging ► Part A: 8.5 kg containers► Part B: 1.5 kg containers► Part A+B: 10 kg ready to mix unit
Sika® Extender TThixotropic agent for resin
Use ► Thixotropic agent for Sikafloor and Sikagard flooring resins on
- Walls - Skirtings/Flashings - Slopes
Consumption / Dosage / Density ► 1.5 to 4% of the resin by weight depending on the thixotropy required.
Packaging ► 1 Kg bucket
Sika Limited (Vietnam)
Floo
ring
/ Coa
ting
Sikafloor® - 263 SL2-part epoxy self-smoothing and broadcast system
Use ► Self-smoothing and broadcast systems for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages, loading ramps etc.
► The broadcast system is recommended for wet process areas, e.g. in beverage industry, food industry, maintenance hangars etc.
Consumption / Dosage / Density ► See data sheet
Specifications / Test reports ► International test certificates are available
Packaging ► 20 kg/ set
Sikafloor® - 1612-part epoxy primer, levelling mortar, intermediate layer and mortar screedUse ► For priming concrete substrates, cement screeds
and epoxy mortars► For normal to strong absorbent substrates► Primer for the Sikafloor epoxy systems► Binder for levelling mortars and mortar screeds
Consumption / Dosage / Density ► See data sheet
Packaging ► 10 kg/ set
Sikafloor® - 2642-part epoxy roller and seal coat
Use ► Roller coat for concrete and cement screed with normal up to medium heavy wear eg. storage and assembly halls, maintenance workshops, garages and loading ramps.
► Seal coat for broadcast systems.
Consumption / Dosage / Density ► See data sheet
Specifications / Test reports ► International test certificates are available
Packaging ► 20 kg/ set
Sika Product Information Chart 2011 29
Floo
ring
/ Coa
ting
Sikafloor® - 21 Purcem® FGMedium to heavy duty self-smoothing polyurethane screed
Use ► Sikafloor®-21 PurCem® FG is ideally suited for the following areas:
- Chemical processing - Food processing and wet areas - Brewing and dairy (clean areas) - Engineering process areas - Heavy duty traffic and plant areas - Warehouse / logistics areas
Consumption / Dosage / Density ► See data sheet
Packaging ► 20 kg/ set (component A+B+C+D)
Sikafloor® - 81 EpoCem®
Self-levelling epoxy-cement floor topping
Use ► Sikafloor® - 81 EpoCem® is used for self-levelling screeds of 1.5 – 3 mm thickness: - Temporary moisture barrier (min. 2-mm thick) - Levelling or patching of concrete surfaces - On concrete floor slabs without waterproofing
membrane, on damp substrates and where aesthetic appearance is not a primary demand.
- Patching layer for epoxy coatings as well as for industrial floor coatings
- Designed for all cementitious substrates
Consumption / Dosage / Density ► See data sheet
Packaging ► 23 kg/ set
Sikafloor® Chapdur®
Coloured mineral dry shake floor hardener
Use ► For superficial reinforcing of floor surfacing and slabs in order to increase the resistance to abrasion and hence to reduce the formation of dust.
► Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings.
Consumption / Dosage / Density ► 3 - 6 kg per m2
Packaging ► 25 kg/ bag
Sika Limited (Vietnam)
Sikaplastic® - 450Elastic, 1-part-polyurethane, liquid waterproofing membrane
Use ► Seamless coating on roofs and concrete structures, which can also be used as a waterproofing membrane on non trafficed. Not suitable for permanent water immersion
► Can be applied on concrete, brickwork, asbestos cement, roof tiles, roofing felt etc.
► Wet areas► Deck Terrace and balcony under protective layer ► For areas with specific official performance
requirements, please contact your local Sika Company for advice on product selection.
Consumption / Dosage / Density ► ~ 1.4 kg/ ltr (DIN EN ISO 2811-1)► All Density values at +23°C
Packaging ► 7 kg, 21 kg containers.
Sika® Sarnafil® Sarnafil® membranes for roofing system
Use ► Exposed roof► Roofgarden/ Utility deck► Pedestrian roof► Traffic roof► Light weight roof► Roof renovation
Consumption / Dosage ► Refer to Technical datasheet.
Sikafloor® - 2 Syn TopDry shake floor hardener
Use ► Sikafloor® – 2 Syn Top provides a hard wearing, dry shake topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors,it forms a coloured,wear resistant smooth surface..
► Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings.
Consumption / Dosage / Density ► Approx. 5 kg per m2 (depend on type and project requirements)
Packaging ► 25 kg/ set
Roofi
ngFl
oorin
g / C
oatin
g
Sika Product Information Chart 2011 31
1000 ltr. PVC Tank15kg, 18kg PVC Pail
5 ltr. Pail
25 ltr. Pail
200 ltr. Drum
10kg Set
1kg Set 2kg Set
20kg, 23kg, 24kg, 25kg Paper Bag
2kg, 5kg Nylon Bag
1kg Nylon Bag
600ml Sausage
stcudorP diuqiL
Epoxy Products
Powder Products
srehtO
15m, 30m Roll
NOTE:The products contained in this catalogue are actively marketed and sold in Vietnam. However, the Sika group range extends to more than 3,000 products worldwide.Please contact Sika Limited (Vietnam) for more detailed information on the products presented here or advise on other Sika products or systems which for obvious reason could not be included in this list.
DISCLAIMER:The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith base on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product's suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary right of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
www.sika.com.vn sikavietnam@vn.sika.com
Sika Limited (Vietnam)HA NOI BRANCH:57 Quang Trung St., Fl.7,Hai Ba Trung Dist, Ha Noi.Tel: (84-4) 3857 2934Fax: (84-4) 3857 2936
SALES OFFICE:60 Nguyen Dinh Chieu St.,Fl.3, District 1, HCMC.Tel: (84-8) 3911 5550Fax: (84-8) 3911 5551
DA NANG BRANCH:155 Tran Phu St., Fl. 9,Hai Chau Dist., Da Nang. Tel: (84-511) 387 3351Fax: (84-511) 387 3353
CAN THO BRANCH:131 Tran Hung Dao St.,Ninh Kieu Dist, Can Tho.Tel: (84-710) 373 1272Fax: (84-710) 373 1274
HEAD OFFICE/ FACTORY:Nhon Trach 1 Industrial Zone,Dong Nai Province, VietnamTel: (84-61) 356 0700Fax: (84-61) 356 0699
HEAD OFFICE/ FACTORY:Nhon Trach 1 Industrial Zone,Dong Nai Province, VietnamTel: (84-61) 356 0700Fax: (84-61) 356 0699
INFRASTRUCTURE: CONCRETE ROADS, BRIDGES, PORTS, AIRPORTS, RUN WAY, TUNNEL …
INDUSTRIAL FACTORIES
WATER SUPPLY & WASTE WATERTREATMENT PLANTS
THERMAL/HYDRO POWER PLANTS,HYDRAULIC PROJECTS
CIVIL CONSTRUCTION, HIGHRISE BUILDINGS
AP
PL
I CA
TI O
N F
I EL
DS
Recommended