Upload
buianh
View
312
Download
3
Embed Size (px)
Citation preview
MonomersOligomers
Head Office:QUALIPOLY CHEMICAL CORP.2, Yeong Gong 5th RD., Yeong An Dist., Kaohsiung City(82841),Taiwan(R.O.C.)Tel:886-7-6236199Fax:886-7-6241972, 6244228E-mail:[email protected]://www.qualipoly.com.tw
QUALIPOLY TECHNOLOGY(GUANGDONG)CORP.18-20, Huanzhen RoadLongbang Industrial Park,JiangMen Duruan, GuangDong, ChinaTel:86-750-8226933Fax:86-750-8226987E-mail:[email protected]://www.qualipoly.com.cn
2015.10.1500
1978 Qualipoly Chemical Corporation was founded in Kaohsiung, Taiwan.1983 Signed licensing agreement with AB Syntes(Sweden) to produce low styrene emission Polyester resin.1987 Obtained certification of approval from Lloyd’s Register of shipping for laminating resin. Signed licensing agreement with Ashland Chemical Co.,(USA) to produce unsaturated polyester resin. Signed licensing agreement with Soab AB(Sweden) to produce alkyd resin and amino resin.1992 Signed licensing agreement with Ashland Chemical Co., (USA) to produce foundry resin.1993 Signed licensing agreement with Becker(Sweden) to produce oil free polyester resin.1995 Granted ISO 9002:(1994) certification by L.R.Q.A.2001 Became a listed company on GreTai Securities Market.2005 Commercialized UV curable materials and oligomers.2006 Merged and estabished Qualipoly Technolgy Corp. in Guangdong, China.2009 Granted ISO 14001:(2004) & OHSAS 18001:(2007) certification by L.R.Q.A.2011 Registered the trademark “QualiCure” for UV curable materials in Taiwan, EU and USA. Completed the production expansion project for UV curable materials.2012 Became a listed company on Taiwan Stock Exchange.2013 UV curing materials were registered in EU under Regulation (EC) No 1907/2006 (REACH)L.R.Q.A. ISO 9001:2008
Qualipoly was founded in 1978 in Kaohsiung, Taiwan. For over thirty years,Qualipoly has continuously been developing and manufacturinghigh-quality resins for coatings, such as unsaturated polyester, acrylic, alkyd and amino resins. With comprehensive programs of licensingagreements, services, R&D development and production technology, weprovide the customers with an extensive range of reliable products.
Our production site of QualiCure UV curing monomers and oligomers is located Yeong An Industrial Park, Kaohsiung, Taiwan. The plant has beenincorporated with advanced technology process and operates with highest safety and environmental standards. We manufacture various monomers and oligomers.
We, furthermore, tailor make the new monomers and oligomers for meeting the specific requirements.
Qualipoly is dedicated to reviewing the products and processes to provide the consistent quality products. We have achieved the certification of ISO-9001:2008, ISO-14001:2004 and OHSAS-18001:2007 at the Yeong An plant site.
Overview of Qualipoly Chemical Corporation
TM
Company History
Moisture(%). (max.)
Acid ValuemgKOH/g
(max.)
Tg(℃)
Viscosity(25℃, cps) Features
Product Name Chemical Composition Molecular
Weight
Lauryl Acrylate LA
Low odour and shrinkage with high flexibility, Low Tg
Low odour, Non-yellowing with good adhesion on plastics and metals
Lauryl Methacrylate LMA
Good water resistance and pigment wetting with excellent flexibility and low shrinkage
(A) Mono-Functional Monomers
Refractive Index
Cyclic Trimethylolpropane FormalAcrylate CTFA
Low surface tension, Good adhesion, Good pigment wetting and hydrophobic
Isodecyl Acrylate IDA
Isobornyl Acrylate IBOA
O-phenylphenoxyethyl Acrylate OPPEOA
2-(2-Ethoxyethoxy)Ethyl Acrylate EOEOEA
2-Phenoxy Ethyl Acrylate 2-PEA
Benzyl MethacrylateBZMA
Good chemical and water resistance with excellent adhesion, Excellent solvency
High refractive index, Low skin irritation and low odour
High solvency, Low shrinkage with good flexibility
Good hardness, Good solvency with excellent adhesion
Low odour and shrinkage with high flexibility, Low Tg
Low shrinkage, Good weather resistance, Good flexibility,Good water resistance
Good hardness, Good solvency with excellent adhesion
MonomersQualiCureTM
1.466
1.444
1.467
1.435
1.435
1.458
1.474
1.576
1.435
1.515
1.488
1.442
1.513
50
50
50
100
60
80
30
100
100
120
50
100
50
255
240
200
212
184
156
208
268
188
192
269
255
162
0.2
0.2
0.1
0.2
0.2
0.2
0.1
0.2
0.2
0.2
0.2
0.1
0.2
Inhibitor(MEHQ.ppm)
100 - 300
100 - 200
150 - 350
100 - 300
200 - 500
400 - 800
100 - 300
100 - 400
200 - 600
200 - 600
100 - 200
100 - 600
200 - 600
0.5
0.5
0.3
0.5
0.2
0.5
0.7
0.5
0.5
0.5
0.5
0.1
0.3
SpecificGravity,(25℃)
0.700 - 0.900
0.700 - 0.900
1.050 -1.110
0.840 - 0.900
0.860 - 0.890
1.060 - 1.080
0.980 - 1.000
1.130 - 1.150
1.010 - 1.030
1.070 - 1.120
0.860 - 0.880
0.860 - 0.890
1.030 - 1.050
-50
-28
40
-58
45
-20
80
N/A
-53
7
-55
-65
N/A
3 - 12
1 - 10
10 - 20
1 - 20
2 - 10
3 - 12
5 - 15
120 - 150
3 - 8
5 - 15
4 - 10
1 - 10
2 - 10
Excellent adhesion, Low colour, High Tg with good moisture resistant
Low surface tension, Good water resistance, Low shrinkage with high flexibility
2 3
Color(APHA)(max.)
GM61J00
GM81J00
GM61K00
GM61M00
GM81HOA
GM61Q00
GM61HR0
GM61W00
GM61Z00
GM61H0A
GM81ZB0
GM61N00
GM61P00
Octyl AcrylateOA
Tetrahydrofurfuryl Acrylate THFA
Isotridecyl Methacrylate ITDMA
Isotridecyl Acrylate ITDA
Color(APHA)(max.)
Acid Value(mgKOH/g)
(max.)
Tg(℃)
GM62A00
GM62B00
GM62D00
GM62E00
GM62E2P
GM62R0E
GM62R3E
GM62R4E
GM62S70
GM62V20
GM62V40
GM62V60
GM82I00
GM82L00
GM82R0E
GM82R4E
GM82PE0
GM82V20
Tripropylene Glycol DiacrylateTPGDA
Ethoxylated(10) Bisphenol-A Diacrylate BPA(10)EODA
Ethoxylated(10) Bisphenol-ADimethacrylate BPA(10)EODMA
Ethoxylated(3) Bisphenol-A Diacrylate BPA(3)EODAEthoxylated(4) Bisphenol-A Diacrylate BPA(4)EODA
Polypropylene Glycol(700) Diacrylate PPG(700)DA
Propoxylated(12)Ethoxylated(6)Dimethacrylate (12)PO(6)EODMA
Polyethylene Glycol(200) Dimethacrylate PEG(200)DMA
4 5
300
226
242
212
328
776
468
512
808
302
508
742
242
286
808
532
1296
336
100
60
40
40
60
60
100
150
70
70
100
100
60
80
60
100
150
60
1.448
1.457
1.449
1.450
1.446
1.515
1.543
1.536
1.451
1.455
1.465
1.468
1.457
1.458
1.511
1.532
1.485
1.464
0.2
0.2
0.1
0.2
0.3
0.3
0.3
0.2
0.1
0.2
0.5
0.4
0.5
0.2
0.2
0.2
0.2
0.2
Moisture(%).max.
SpecificGiravity.(25℃)
Inhibitor(MEHQ.ppm)
200 - 1,000
100 - 300
400 - 800
50 - 200
100 - 400
100 - 600
200 - 800
200 - 800
50 - 100
200 - 600
400 - 600
200 - 600
400 - 600
100 - 300
150 - 250
200 - 600
80 - 120
100 - 300
0.1
0.1
0.5
0.5
0.5
0.2
0.1
0.2
0.1
0.2
0.3
0.4
0.5
0.5
0.5
0.5
0.1
0.5
1.030 - 1.050
1.010 - 1.030
1.040 - 1.100
1.010 - 1.040
0.900 - 1.100
1.110 - 1.170
1.140 - 1.180
1.130 - 1.160
1.010 - 1.020
1.080 - 1.130
1.110 - 1.120
1.110 - 1.130
1.050 - 1.080
1.060 - 1.080
1.110 - 1.150
1.130 - 1.160
1.020 - 1.040
1.070 - 1.090
64
41
96
107
35
42
67
63
-32
14
3
-23
66
-7.6
-1
5.8
N/A
N/A
10 - 18
5 - 10
7 - 13
5 - 15
10 - 20
350 - 800
1,400 - 2,000
1,000 - 1,300
50 - 90
10 - 30
30 - 70
50 - 110
5 - 10
5 - 15
200 - 700
500 - 800
70 - 120
10 - 18
Low shrinkage, Good adhesion with excellent wetting, Flow and leveling
Low viscosity with chemical resistance and high reactivity
General purpose, Good flexibility, and reactivity
Propoxylated(2) Neopentyl GlycolDiacrylateNPG(2)PODA
Fast cure, Low viscosity, Excellent adhesion with chemical,water and heat resistances
Low viscosity, Good adhesion and high boiling point
HDDA
Low viscosity with chemical and water resistance
Low volatility, Good flexibility and good adhesion
Fast cure, Low shrinkage with good hydrophilic / hydrophobicbalance
Low shrinkage, Good adhesion, Good chemical, Hear resistance with excellent hydrophilic / hydrophobic balance
Low shrinkage, Good flexibility, Good adhesion and water compatibile
Good water solubility, Low odour, Excellent flexibility
Low viscosity, Low volatility, Good dilution and fast cure
Low shrinkage, Good adhesion, Good chemical, Heat resistance with excellent hydrophilic / hydrophobic balance
QualiCureTM Monomers
Polyethylene Glycol(200) Diacrylate PEG(200)DAPolyethylene Glycol(400) Diacrylate PEG(400)DAPolyethylene Glycol(600) Diacrylate PEG(600)DA
Ethoxylated(4) Bisphenol-A Dimethacrylate BPA(4)EODMA
Triethylene Glycol DimethacrylateTEGDMA
Low shrinkage, Good flexibility, Good adhesion and water compatible
Low viscosity, Good adhesion and high boiling point
Good heat resistance, Low shrinkage with good hydrophilic/hydophobic balance
Low volatility, Good dilution, Fast cure with good hydrophobilc
Low shrinkage, Good adhesion, Good chemical, Hear resistance with excellent hydrophilic / hydrophobic balance
Acid Value(mgKOH/g)
(max.)
Specific Gravity
Tg(℃)
Viscosity(25℃, cps)
Trimethylolpropane Triacrylate TMPTA
Product Name Chemical Composition Molecular
WeightColor
(APHA)(max.)
Fast cure with good hardness and chemical resistance
Ethoxylated(3) Trimethylolpropane Triacrylate TMP(3)EOTA
296
428
560
692
956
1176
296
296
296
423
428
352
550
482
N/A
1.474
1.471
1.469
1.469
1.469
1.47
1.484
1.484
1.484
1.465
1.461
1.485
1.475
1.478
1.477
62
37
-3
-12
-32
-32
100
103
60
240
33
103
-33
96
N/A
70 - 120
50 - 75
70 - 100
80 - 130
140 - 200
200 - 300
550 - 750
550 - 750
650 - 1,200
N/A
70 - 100
550 - 750
110 - 200
800 - 1,500
400 - 800
1.090 - 1.120
1.060 - 1.120
1.100 - 1.150
1.090 - 1.130
1.100 - 1.120
1.100 - 1.150
1.150 - 1.210
1.150 - 1.210
1.150 - 1.210
N/A
1.080 - 1.110
1.170 - 1.190
1.120 - 1.160
1.050 - 1.150
1.095 - 1.105
Low skin irritation, Good flexibility and chemical resistance
Refractive Index
0.1
0.5
0.5
0.2
0.5
0.5
0.2
0.2
0.2
0.1
0.1
0.2
0.5
0.2
0.2
Ethoxylated(6) TrimethylolpropaneTriacrylate TMP(6)EOTA
High gloss and low viscosity with good reactivity and flexibility
Ethoxylated(9) TrimethylolpropaneTriacrylate TMP(9)EOTA
Ethoxylated(15) Trimethylolpropane Triacrylate TMP(15)EOTA
Ethoxylated(20) TrimethylolpropaneTriacrylate TMP(20)EOTA
Pentaerythritol Triacrylate PETIA
Pentaerythritol Triacrylate PETIA
Ethoxylated(5) Pentaerythritol Tetraacrylate PPTTA
(C)Multi-Functional Monomers
60
50
100
100
150
60
60
60
60
100
100
60
60
3(G)
100
Low shrinkage, Low skin irritation, Good flexibility and chemicalresistance
Water soluble, Low skin irritation, Good flexibility and chemicalresistance
Fast cure, Good hardness and chemical resistance
Fast cure, Good hardness and chemical resistance, Not crystalized at low temperature, Low acid value
High Tg, Good scratch resistance with good adhesion
Fast cure, Low viscosity and high reactivity
High reactivitity, Good scratch and chemical resistance with good adhesion
GM63C00
GM63C3E
GM63C6E
GM63C9E
GM63CFE
GM63CTE
GM63F00
GM63F0A
GM63F0H
GM63T00
GM63X00
GM64F00
GM64F5E
GM64U00
GM64U0A
High reactivity, Good adhesion to plastics, may crystalize at room temperature
Tri(2-Hydroxy Ethyl) IsocyanurateTriacrylate THEICTA
Propoxylated(3) Glyceryl TriacrylateGPTA
High reactivityity, Low viscosity, Excellent scratch and slovent resistance with good flexibility
MonomersQualiCureTM
Ditrimethylolpropane TetraacrylateDi-TMPTA
Pentaerythritol Triacrylate PETIA
Pentaerythritol TetraacrylatePET4A
Fast cure, Low viscosity and hardness, Low skin irritation
Fast cure, Good hardness and chemical resistance
Moisture(%).max.
Inhibitor (MEHQ,ppm)
100 - 300
300 - 600
100 - 1,100
100 - 300
300 - 600
300 - 700
300 - 1,100
300 - 1,100
300 - 1,100
300 - 1,200
200 - 500
300 - 1,100
200 - 600
100 - 1,600
200 - 600
0.1
0.5
0.5
0.5
1.0
0.5
2.0
0.5
5.0
1.0
0.5
1.0
1.0
5.0
1.0
76
Ditrimethylolpropane TetraacrylateDi-TMPTA
High gloss and low viscosity with good reactivity and flexibility
Dipentaerythritol HexaacrylateDPHA Very fast cure, Excellent hardness and scratch resistance
(C)Multi-Functional MonomersMonomersQualiCureTM
Acid Value(mgKOH/g)
(max.)
Specific Gravity
Tg(℃)
Viscosity(25℃, cps)
Product Name
Chemical Composition Molecular Weight
Color(APHA)(max.)
578
N/A
578
578
578
N/A
578
578
338
1.496
1.496
1.496
1.496
1.496
1.496
1.469
1.496
1.47
94
N/A
N/A
94
N/A
N/A
94
94
27
4,000 - 7,000
4,000 - 7,000
5,000 - 8,000
4,000 - 7,000
7000 - 10,000
4,000 - 7,000
10,000 - 15,000
7,000 - 10,000
35 - 50
Refractive Index
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.1
100
100
100
100
100
100
100
100
70
GM66G00
GM66G0A
GA66G0B
GA66G0C
GM66G0L
GM66G0P
GM66G0X
GM66G0H
GM83C00
Moisture(%).max.
Inhibitor (MEHQ,ppm)
1.110 - 1.200
1.110 - 1.200
1.110 - 1.200
1.110 - 1.200
1.110 - 1.200
1.100 - 1.200
1.110 - 1.200
1.110 - 1.200
1.050 - 1.080
98
Dipentaerythritol HexaacrylateDPHA
Very fast cure, Excellent hardness and scratch resistance, High viscosity, Low skin irritation, Good Chemical & water resistance
Very fast cure, Excellent hardness and scratch resistance, High viscosity
Tripropylene Glycol DiacrylateTPGDA-TF
1,6-Hexanediol Diacrylate HDDA-TF
General purpose, Good flexibility and reactivity
(D) Toluene-Free MonomersAcid Value(mgKOH/g)
(max.)
Specific Gravity
Tg(℃)
Viscosity(25℃, cps)
Product Name
Chemical Composition Molecular Weight
Color(APHA)(max.)
300
226
242
296
428
470
428
482
1.448
1.457
1.449
1.474
1.471
1.459
1.461
1.476
64
41
96
62
37
-15
33
98
10 - 18
5 - 10
7 - 13
70 - 120
40 - 80
70 - 100
70 - 100
400 - 800
1.030 - 1.050
1.010 - 1.030
1.040 - 1.100
1.090 - 1.120
1.060 - 1.120
1.040 - 1.070
1.080 - 1.110
1.090 - 1.110
Refractive Index
0.2
0.2
0.1
0.1
0.1
0.2
0.1
0.1
100
60
40
60
80
100
100
100
Moisture(%).max.
Inhibitor (MEHQ,ppm)
200 - 1,000
100 - 300
400 - 800
100 - 300
300 - 600
400 - 600
200 - 500
400 - 600
0.1
0.1
0.5
0.1
0.2
0.5
0.5
0.5
Dipropylene Glycol DiacrylateDPGDA-TF Low viscosity with chemical and water resistances
Trimethylolpropane TriacrylateTMPTA-TFEthoxylated(3) Trimethylolpropane TriacrylateTMP(3)EOTA-TF
Propoxylated(3) Glyceryl TriacrylateGPTA-TF
Ditrimethylolpropane TetraacylateDi-TMPTA-TF
Fast cure, Low viscosity, Excellent adhesion with chemical, Water and heat resistance
Fast cure with good hardness and chemical resistance
Low shrinkage, High reactivity with good flexibility and hydrophilic / hydrophobic balance
High gloss and low viscosity with good reactivity and flexibility
Fast cure, Low viscosity and high reactivity
GM62A0F
GM62B0F
GM62D0F
GM63C0F
GM63C3F
GM63C3P
GM63X0F
GM64U0F
Dipentaerythrtiol HexaacrylateDPHA
Dipentaerythrtiol HexaacrylateDPHA
Dipentaerythrtiol PentaacrylateDPPA
Trimethylolpropane Trimethacrylate TMPTMA
300 - 900
300 - 900
300 - 900
300 - 900
300 - 900
300 - 900
300 - 900
300 - 900
100 - 300
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.1
High hydroxy value, Not crystallized at low temperature
High hydroxy value, Not crystallized at low temperature
Very fast cure, Excellent hardness and scratch resistance, Not crystallized at low temperature
Low skin irrtation, Low odour, Low volatility with good chemicalresistance
Propoxylated(3) Trimethylolpropane TriacrylateTMP(3)POTA-TF
High reactivitity, Good scratch and chemical resistance with good adhesion
Dipentaerythrtiol HexaacrylateDPPA
Dipentaerythrtiol HexaacrylateDPHA
Dipentaerythrtiol HexaacrylateDPHA
Very fast cure, Excellent hardness and scratch resistance, High viscosity, Low skin irritation, Good Chemical & water resistance
High hydroxy value, Not crystallized at low temperature, lower metal ions
(A) Epoxy AcrylatesProduct Name Chemical Composition Functionality
Color(Gardner)
(max.)
Mol. Weight
Tg(℃)
Acid Value(mgKOH/g)
(max.)Viscosity
(25℃,cps)Reactivity Flexibility
ChemicalResistance
AbrasionResistance Features
GU1160C
GU1200W
GU1280A
GU1380A
GU1400Z
GU1475A
GU1480A
GU1600Y
GU1650X
GU1700W
GU1700P
GU1700T
GU1700Y
GU1700Z
GU1800W
GU1900W
GU1900Z
3
2
2
2
2
2
2
2
2
1
3
1
2
2
3
2
2
Bisphenol-A Epoxy DiacrylateDiluted in 20% TPGDA
Aliphatic Epoxy Diacrylate
Modified Bisphenol-AEpoxy Diacrylate
Amine Modified Bisphenol-AEpoxy Diacrylate
Aliphatic Epoxy Diacrylate
Good adhesion, Good flexibility
Low viscosity, High gloss with excellent gloss and reactivity
Neat bisphenol A epoxy acrylate, High reactivity and high gloss
Good pigment wetting and water balance for use in litho inks and varnishes
Low viscosity, High gloss with excellent gloss and reactivity
Epoxidized soy bean acrylate oligomer, Excellent pigment wetting with good flexibility
Amine modified epoxy acrylate, Fast cure, Excellent adhesion to plastics
High hardness, Heat resistance, Good chemical resistance
Neat bisphenol A epoxy acrylate with high reactivity and high gloss
OligomersQualiCureTM
Modified Bisphenol-A Epoxy Diacrylate Diluted in 20% TPGDA
Bisphenol-A Epoxy Diacrylate
Bisphenol-A Epoxy DiacrylateDiluted in 25% TPGDA
Cresol Novolac Epoxy Acrylate Diluted in 40% TMPTA
Modified Bisphenol-A Epoxy Diacrylate Diluted in 50% GPTA
Aromatic Epoxy Acrylate
Good flexibility, Low shrinkage, Excellent metal & plastic adhesion
Weather resistance, chemical resistance, flexibility, Lowshrinkage
10 11
Modified epoxy acrylate, Fast cure, Good flexibility and toughness
Good metal adhesion, Good flexibility
Good metal adhesion, Fast curing, Flexible, Low viscosity
Modified Bis-phenol-A EpoxyDiacrylate
Bisphenol-A Epoxy DiacrylateDiluted in 20% TPGDA
Modified Bisphenol-A EpoxyDiacrylate
Aliphatic Epoxy Diacrylate
Epoxidide Soya Bean OilTriacrylate
Modified Bisphenol-A EpoxyDiacrylate
5
3
2
1
1
1
1
3
3
2
3
1
8
1
6
2
6
1000
1200
1200
500
500
500
500
570
570
N/A
N/A
N/A
350
350
1100
750
750
67
51
51
60
60
N/A
N/A
56
56
N/A
N/A
13
26
26
13
52
57
5
5
5
1
1
2
1
3
2
2
3
2
4
1
5
3
5
8,000 - 12,000
30,000 - 50,000
22,000 - 42,000
10,000 - 12,000
18,000 - 28,000
160,000 - 260,000
1,000 - 4,000
80 - 180
15,000 - 25,000
150 - 250
700 - 1,300
25,000 - 35,000
23,000 - 35,000
450,000 - 550,000
4,000 - 7,000(60℃)
10,000 - 30,000(60℃)
5,000 - 9,000(60℃)
5
2
2
3
3
4
4
4
4
1
1
2
3
3
2
4
5
1
4
4
2
2
3
3
3
3
3
5
4
3
3
4
5
5
5
4
4
5
5
5
5
3
3
4
4
5
4
4
4
4
4
4
4
4
3
3
4
4
3
3
1
4
2
3
3
4
5
5
Good pigment wetting and water balance for use in litho inks and varnishes
Good metal adhesion, Good flexibility
Low viscosity, Fast cure, Good chemical resistance, High gloss
Product Name
Chemical Composition FunctionalityColor
(Gardner)(max.)
Mol. Weight
Acid Value(mgKOH/g)
(max.)
Viscosity(25℃, cps) Reactivity Flexibility Chemical
ResistanceAbrasion
Resistance Features
GU2500K
GU2600K
GU2610K
2
2
2
15,000 - 25,000
14,000 - 21,000
10,000 - 100,000
GU3001Z
GU3010Z
GU3030Z
GU3100W
GU3100Y
GU3100Z
GU3185A
GU3185B
Product Name
Chemical Composition FunctionalityColor
(Gardner)(max.)
Mol. Weight
Tg(℃)
(B) Full Acrylates
(C) Aliphatic Urethane Acrylates
Aliphatic Urethane Diacrylate
3
2
1
500
1400
1400
30
30
30
1
1
1
2
1
1
4
5
5
4
3
3
1
3
3Improve adhesion to difficult substrates, Good flexibility, And non-yellowing property
Good yellowing resistance, Good flexibility,Good gloss retention, Good elongation, Good adhesive
Good yellowing resistance, Good flexibility, Good gloss retention, Good elongation, Good adhesive
Specifically designed for water soluble screen inks and primer coats on wood flooring
Viscosity(25℃, cps) Flexibility Chemical
ResistanceAbrasion
Resistance Features
OligomersQualiCureTM
Aliphatic Urethane Diacrylate
2
2
2
6
2
2
2
2
2
2
2
2
2
2
2
2
5500
4000
96
N/A
2200
2000
1200
1200
-40
-37
-39
N/A
48
N/A
33
33
(60℃)
35,000 - 65,000
10,000 - 30,000
20,000 - 50,000
20,000 - 40,000
20,000 - 50,000
60,000 - 80,000
30,000 - 50,000
5
5
5
4
4
4
4
4
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
3
Improve adhesion to difficult substrates, Good flexibility
Attachment for hard metal and plastic, with excellent adhesion, Good flexibility
Aliphatic Urethane Diacrylate
12 13
Reactivity
1
1
1
2
2
2
2
2
Tg(℃)
Excellent combination of toughness and flexibility
Aliphatic Urethane HexaacrylateVery high water soluble ability, Designed for UV inks
Full Acrylate Resin
Full Acrylate Resin
Full Acrylate Resin
Aliphatic Urethane Diacrylate
Aliphatic Urethane DiacrylateDiluted in 15% TPGDA
Aliphatic Urethane DiacrylateDiluted in 15% HDDA
35,000 - 80,000(40℃)
Good yellowing resistance, Good flexibility,Good gloss retention, Good elongation, Good adhesive
Excellent combination of toughness and flexibility
Aliphatic Urethane Diacrylate Very high water soluble ability, Designed for UV inks, primer coats on wood.
Viscosity(25℃, cps) Flexibility Chemical
ResistanceAbrasion
Resistance Features
GU3285A
GU3290M
GU3300W
GU3300Z
GU3370A
GU3400Y
GU3400Z
GU3501Q
GU4000Y
GU4075B
GU4100Y
GU4175X
Product Name Chemical Composition Functionality
Color(Gardner)
(max.)
Mol. Weight
Tg(℃)
(C) Aliphatic Urethane Acrylates
Good flexibility, Abrasion resistance, Adhesion and exterior durability
Good toughness and flexibility with excellent adhesion
Good flexibility, Good weatherability, Adhesion to plastics and polycarbonates
Good yellowing resistance, Low viscosity high tensile strength, High elongation, Fast cure
Aliphatic Urethane DiacrylateDiluted in 15% TPGDAA
Aliphatic Urethane Diacrylate
2
2
2
2
2
2
2
2
4
3
3
3
1600
1300
1500
5500
2100
1500
1500
4900
N/A
2000
1300
2000
4
-25
-27
-37
7
22
60
19.7
N/A
45
N/A
32
3
3
5
5
5
5
5
4
3
2
3
3
3
4
3
3
4
4
4
3
3
4
4
5
3
4
3
4
4
4
4
3
4
4
3
5
10,000 - 150,000
80,000 - 110,000
55,000 - 75,000
70,000 - 115,000
90,000 - 150,000
75,000 - 145,000
Excellent abrasion and chemical resistance
Low viscosity, Good flexibility, Good wetting
Best stain and abrasion resistance, Good exteroir durability and thermal stability
OligomersQualiCureTM
Very good toughness with flexibility, Especially for use in sealers and fillers
Good yellowing resistance, Good flexibility, Goodelongation, Good adhesive
Low viscosity, Outstanding exterior durability, Fast cure
Aliphatic Urethane TriacrylateDiluted in 25% HDDA
Aliphatic Urethane Triacrylate Diluted in 25% G3POTA
Aliphatic Urethane Diacrylate Diluted in 10% HEMA
Aliphatic Urethane Diacrylate Diluted in 30% TPGDA
Aliphatic Urethane Diacrylate
Aliphatic Urethane Diacrylate
Aliphatic Urethane Diacrylate
Aliphatic Urethane Tetraacrylate
40,000 - 70,000
(60℃)
5,200 - 7,200
(60℃)
36,000 - 56,000
(60℃)
1514
Reactivity
6,000 - 8,000
(60℃)
Good pigment wetting, transference and adhesion, Especifically for use in litho and flexo inks
Aliphatic Urethane Diacrylate Diluted in 25% IBOA
Aliphatic Urethane Tetraacrylate
6,000 - 10,000
(23℃)
10,000 - 25,000
(23℃)
Good yellowing resistance, Good flexibility, Good gloss retention, Good elongation, Good adhesive
150(APHA)
2
2
2
2
2
2
4
3
4
3
4
4
2
2
2
2
2
2
1
1
2
1
2
Viscosity(25℃, cps) Flexibility Chemical
ResistanceAbrasion
Resistance Features
GU4200Z
GU4280B
GU4300Y
GU4500Y
GU6100L
GU6200Y
GU6200Z
GU6300Y
GU6370F
GU7200Z
GU7400Z
GU7500Z
GS4920C
GS5120C
Product Name Chemical Composition Functionality
Color(Gardner)
(max.)
Mol. Weight
Tg(℃)
(C) Aliphatic Urethane Acrylates
Aliphatic Urethane Triacrylate 3
4
3
3
6
6
6
6
6
9
10
15
N/A
N/A
1500
1600
1100
1100
1200
1000
1000
1000
1600
1450
1350
2220
N/A
N/A
2
1
2
2
2
2
2
2
2
1
1
30
N/A
35
N/A
80
83
83
47
49
102
54
145
N/A
N/A
5
4
5
3
5
4
4
5
4
3
3
3
5
5
5
3
5
3
4
5
5
4
5
5
5
5
5
5
40,000 - 80,000
20,000 - 40,000
70,000 - 90,000
65,000 - 85,000
90,000 - 120,000
4,000 - 7,000
400,000 - 500,000
75,000 - 95,000
200 000 - 300,000
1,100 - 1,600
1,000 - 2,000
OligomersQualiCureTM
Special solvent based Aliphatic Urethane Acrylate
Special solvent based Aliphatic Urethane Acrylate
Aliphatic Urethane HexaacrylateDiluted in 30% PETIA
Aliphatic Urethane Hexaacrylate
Aliphatic Urethane Hexaacrylate
Aliphatic Urethane Multi-acrylate
Aliphatic Urethane Multi-acrylate
1716
Aliphatic Urethane Triacrylate
Aliphatic Urethane Triacrylate
Aliphatic Urethane Hexaacrylate
Aliphatic Urethane Hexaacrylate
10,000 - 22,000
(60℃)
Very good reistant to stain and abarsion with good adhesion
Good chemical resistance, Fast cure response, Weatherability, Low shrinkage
Low viscosity, Very good resistant to stain and abarsion with Good adhesive
Low viscosity, Abrasion resistance, Good levellingproperty
Excellent ressistance, Flexibility and adhesion
Low viscosity, Excellent scratch, Resistance andadhesion
Good chemical resistance, Fast cure response, Weatherability, Low shrinkage, And abrasion resistance
Good yellowing resistance, High hardness, Good gloss retention, Good adhesive for All material
Reactivity
3
5
4
4
5
5
5
5
4
5
5
5
5
5
Aliphatic Urethane Multi-acrylate
Good yellowing resistance, Good hardness, Fastcure, Good scrape resistance, Good abrasion
Fast cure, Excellent adhesion and abrasion resistance
Good yellowing resistance, High hardness, Goodleveling, Fast cure, Good abrasion resistance
Aliphatic Urethane Triacrylate
100(APHA)
150(APHA)
700 - 1,100
(23℃)
3
2
3
3
2
1
1
2
1
1
1
1
3
3
Fast cure, Excellent adhesion and abrasion resistance
Good yellowing resistance, High hardness, Good gloss retention, Good adhesive for plastic material
Good yellowing resistance, High hardness, Goodgloss retention, Good scrape resistance, Fast cure, Good abrasion resistance
150(APHA)
5,500 - 9,500
(23℃)
Viscosity(25℃, cps) Flexibility Chemical
ResistanceAbrasion
Resistance Features
GU3680A
GU3700Y
GU3701W
GU3775A
GU3980A
GU4660A
GU4900Y
GU6600Y
GU7900Z
Product Name Chemical Composition Functionality
Color(Gardner)
(max.)
Mol. Weight
Tg(℃)
Good combinarion of toughness and flexibility2
2
2
2
2
3
4
6
10
1200
900
1600
1600
1600
1300
1100
950
1250
30
55
-24
10
24
57
40
49
45
4
2
5
5
5
2
3
1
1
3
3
3
3
3
4
5
4
5
Product Name Chemical Composition Functionality
Color(Gardner)
(max.)
Mol. Weight
Tg(℃)
Viscosity(25℃, cps) Flexbility
ChemicalResistance
AbrasionResistance
Features
(D)Aromatic Urethane Acrylates
OligomersQualiCureTM
(E) Amine Modified Polyether Acrylates
GU8100W
GU8100Y
GU8100Z
Polyester Aromatic Urethane Diacrylate Diluted in 20% TPGDA
Polyester Aromatic Urethane Diacrylate
Aromatic Urethane Triacrylate
Aromatic Urethane Hexaacrylate
Aromatic Urethane Decaacrylate
18 19
2
2
2
2
2
2
2
2
3
4
2
2
3
4
5
5
5
100,000 - 140,000(20℃)
5,000 - 7,000(23℃)
Good pigment wetting and water balance, Especially for use in lito inks
Very good toughness with and flexibility, Especially for use in sealers and fillers
A good combination of resilience, Flexibility andhydrolytic stability
Very good hardness, Durability and resistance
Low viscosity, High abrasion and scratch resistance, Especially for parquet, Cork and films
Fast cure, As an additive oligomer to increase the cure response of inks
High hardness, Good scrape resistance, Good adhesion, Good chemical resistance, Good water resistance, Fast cure, Good abrasion
High reactivity and good flexibility, For use inflexo inks, Sealers and clear varnishes
Low viscosity, High reactivity for clear and pigmented formulations
High reactivity, Good pigment wetting andchemical resistance
3
3
3
3
3
4
2,500 - 3,500
80 - 100
450 - 650
4
4
3
50
20
6
1000
600
1000
2
2
2
4
2.5
3.5
Amine Modified Polyether Acrylate
Amine Modified Polyether Acrylate
Amine Modified Polyether Acrylate
40,000 - 60,000
150,000 - 210,000
6,000 - 9,000
10,000 - 30,000
20,000 - 40,000
24,500 - 32,500
170,000 - 210,000
Reactivity
3
4
2
2
2
3
4
5
5
Reactivity
4
4
4
Polyester Aromatic UrethaneDiacrylate Diluted in 25% TPGDA
Polyester Aromatic UrethaneDiacrylate Diluted in 20% TPGDA
Aromatic Urethane Triacrylate Diluted in 40% TPGDA
300(APHA)
Polyester Aromatic Urethane Diacrytate
Amine valuemgKOH/g
55 - 56
48 - 56
33 - 45
Very good toughness with and flexibility, Especially for use in sealers and fillers
Viscosity(25℃, cps) Flexibility Chemical
ResistanceAbrasion
Resistance Features
GU2168Z
GU2169Z
GU8400C
GU8400X
GU8436C
GU8436X‘
GU8500C
GU8540C
GU8703D
GU9315Z
GU9400Y
GU9600Y
GU9600Z
GU9700D
GU9700Y
GU9700Z
GU9900Y
GU9900Z
GU9900W
Chlorinated Polyester Triacrylate
Product Name Chemical Composition Functionality
Color(Gardner)
(max.)
Mol. Weight
Tg(℃)
(F) Polyester Acrylates
Chlorinated Polyester Triacrylate
Chlorinated polyester acrylate, For use in inks with good adhesion to plastics and metals
2
2
3
3
3
3
3
3
2
12 - 15
4
4
4
4
4
4
6
6
6
3
5
2
3
2
3
5
5
4
2
10
2
5
3
3
4
5
3
10
N/A
N/A
5000
5000
5000
5000
N/A
N/A
N/A
N/A
1500
1000
1400
1600
1600
5000
1500
1500
4000
N/A
N/A
53
53
53
53
15
15
N/A
N/A
23
31
N/A
N/A
N/A
N/A
17
60
N/A
5
5
5
5
5
5
4
4
2
3
3
4
5
4
5
5
4
4
4
4
4
2
2
2
2
1
1
3
3
4
3
3
3
3
3
4
5
4
1,000 - 1,300
80,000 - 100,000
70,000 - 120,000
70,000 - 120,000
100,000 - 150,000
70,000 - 150,000
100,000 - 180,000
70,000 - 150,000
10,000 - 15,000
300 - 700
100,000 - 220,000
400 - 1,000
4,000 - 15,000
20,000 - 40,000
1,500 - 5,000
15,000 - 20,000
7,000 - 12,000
40,000 - 60,000
15,000 - 50,000
Acid value mg KOH/g
1
1
1
1
1
1
2
2
2
4
4
3
4
4
4
4
5
4
5
OligomersQualiCureTM
2120
Polyester Tetraacrylate
Unsaturated Polyester Diacrylate
Polyester Tetraacrylate
Polyester Tetraacrylate
Hyperbranched Polyester Acrylate
Polyester Tetraacrylate
Polyester hexaacrylate
Reactivity
260 - 320
100 - 110
20
20
20
20
10
12
30
2
15
20
15
15
15
5
25
30
15
3
3
3
3
3
3
3
3
3
3
1
2
2
1
2
2
1
5
2
Chlorinated polyester acrylate, Excellent adhesion on plastics, Especially for offset inks
Excellent pigment wetting property and good hydrophilic / hydrophobic balance
Fast curing, Low viscosity with good pigment wetting and flexibility
Hyperresponsiveness, Matte paint for wood coatings
Good flexibility and reactivity for cost-competitive wood application
High reactivity and abrasion resistance
Chlorinated polyester acrylate, For use in inks with good adhesion to plastics and metals
Chlorinated Polyester Triacrylate
Fatty Acid Modified Polyester hexaacrylate
Excellent pigment wetting, Especially for high viscosityformulations
Fatty acid modified, Excellent lithographic properties and good pigment wetting
Polyester Tetraacrylate
Chlorinated Polyester Triacrylate
Chlorinated Polyester Triacrylate
Chlorinated Polyester Triacrylate
Fatty Acid Modified Polyester hexaacrylate
Polyester Tetraacrylate
Chlorinated polyester acrylate, For use in inks with good adhesion to plastics and metals
Chlorinated polyester acrylate, For use in inks with good adhesion to plastics and metals
Good abrasion low shrinkage used in coatings on plastic and inkjet inks.
Excellent adhesion and sandini on wood Primer coatings
Excellent pigment wetting property and good hydrophilic / hydrophobic balance
Excellent pigment wetting, Especially for low viscosityformulations
Chlorinated polyester acrylate, Excellent adhesion on plastics, Especially for offset inks
Chlorinated Polyester Acidic Adhesion Promoter
Methacrylate Modified AcidicAdhesion Promoter
Attachment for hard metal and plastic, With excellentadhesion
Good metal adhesion, Good flexibility
Cost competitive, High cure speed, High gloss and low yellowing
Product Name Chemical Composition Functionality
Amine value (mg KOH/g)
Color(Gardner)
(max.)Mol.
WeightViscosity
(25℃, cps)Addition
Level(%)
Features
(G) Amine Synergists
OligomersQualiCureTM
Product Name Chemical Composition Functionality
Acid Value mgKOH/g
Color(Gardner)
(max.)Reactivity
Viscosity(25℃, cps)
AbrasionResistance Features
(H) Additives for UV Curable Coating
Reactive Amine Synergists
Reactive Amine Synergists
Low yellowing,
Fast cure, Low bleeding, Low addition levels
High cure speed, High gloss and low yellowing
Oligomer amine synergist with excellent adhesion to difficult substrates
1
1
1
2
1
2
3
GC1000W
GC1000Y
GC1000Z
GC1100W
GC1100Y
GC1100Z
GC1200C
232 - 250
198 - 210
222 - 238
102 - 122
180 - 200
125 - 145
N/A
2
2
2
2
2
2
2
450
450
450
500
600
500
500
10 - 30
10 - 30
20 - 40
60 - 110
60 - 110
800 - 1,500
3,000 - 4,500
9 - 12
9 - 12
9 - 12
20 - 25
10 - 12
10 - 15
15 - 20
Silicone Acrylate
2
2
3
2
280 - 320
2
1,000 - 1,500
20,000 - 60,000
Flexibility
5
N/A
3
N/A
1
N/A
22 23
Chemical Resistance
3
N/A
Reactive Amine Synergists
Reactive Amine Synergists
Reactive Amine Synergists
Reactive Amine Synergists
Reactive Amine Synergists
Cost competitive, High cure speed, High gloss and low yellowing
Cost competitive, High cure speed, High gloss and low yellowing, Low addition levels
GA2600Y
GA2800Z
Methacrylate Modified Acidic Adhesion Promoter
An acidic methacrylate, Excellent adhesion to metal and glass
A silicone acrylate to improve substrate wetting and excellent surface slip after cure
Low bleeding
Colorless to slight yellow liquid
Pale yellow powder
Light yellow powder
Product Name
Chemical Composition
CAS No.Molecular
Weight
Assay(%), min
Melting Point(%)
Viscosity(25℃, cps)
Volatiles (%),max. Features
White powder
GI-1173
GI-184
GI-BDK
GI-BP
GI-TPO
GI-ITX
GI-BMS
GI-907
GI-369
GI-PBZ
GI-819
7473-98-5
947-19-3
24650-42-8
119-61-9
75980-60-8
5495-84-1
83846-85-9
71868-10-5
119313-12-1
2128-93-0
162881-26-7
98.0
99.0
99.0
99.5
97.0
98.0
99.0
98.0
99.0
99.0
99.0
164.2
204.3
256.3
182.2
384.0
241.0
304.0
279.4
366.5
258.3
418.5
N/A
46 - 50
64 - 67
47 - 49
87 - 93
57 - 72
75 - 85
72 -76
110 - 114
99 - 103
127 - 133
21 - 25
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
(I) Photo-initiators
White to off-white crystalline powder or flake
White to off-white crystalline powder or flake
OligomersQualiCureTM
Light beige crystalline powder
24
White crystalline powder
N/A
0.5
0.1
0.1
0.2
0.2
0.1
0.5
0.2
0.2
0.2
2-Benzyl-2-(dimethylamino)-4’-Morpholinobutyrophenone
4-Phenyl benzophenone
Bis(2,4,6-trimethylbenzoyl) phenylphosphine oxide
Yellow crystalline powder
White to off-white crystalline powder
Yellow crystalline powder
20 MT/Isotank 1 MT/IBC and 200 kg/drum
2-Hydroxy-2-Methyl-phenyl-propane-1-one
1-Hydroxy-Cyclohexylphenyl-Ketone
Benzil Dimethyl Ketal
Benzophenone
Diphenyl(2,4,6-trimethylbenzoyl)-phosphine oxide
Isopropyl Thioxanthone(Mixture of 2-and 4-isomer)
4-Benzoyl-4’-methyldiphenylsulphide
2-Methyl-1-1[4-(methylthio)phenyl]-2-Morpholino-propane-1-one
Recommended Materials For The Major Applications(A)Required characteristic
Low Color
Low Odor
Cure Speed
Adhesion
Gloss
─
─
Low Color
Low Odor
Cure Speed
Adhesion
Abrasion Resistance
Controllable Gloss
Hardness
Low Color
Adhesion
Flexibility
Abrasion Resistance
Durability
─
─
Pigment Wetting
Water Balance
Rheology Control
Adhesion
─
─
─
Low Color
Adhesion
Abrasion Resistance
Flexibility
Durability
Controllable Gloss
─
Papers Woods Plastics Metals Inks
GM61W00GM62A00GM62B00GM62D00GM63C00GM63C3E ─ ─ ─ ─ ─ ─ ─ ─
Papers Woods Plastics Metals Inks
Papers Woods Plastics Metals InksGU1480AGU1600YGU1800WGU3100YGU3185AGU3680AGU3700WGU4500ZGU4780AGU4900YGU6600YGU8100WGU8100YGU8730DGU1000YGU9600YGU9700ZGA2800Z
MonomersQualiCureTM
OligomersQualiCureTM
GM61W00GM61Z00GM62A00GM62D00GM63C00GM63C3EGM64U00 ─ ─ ─ ─ ─ ─ ─
GM61K00GM61P00GM61Q00GM61W00GM61Z00GM62A00GM62B00GM62D00GM62E2PGM63C00GM63C3EGM63F00GM63T00GM64F5E
GM61K00GM61P00GM61Q00GM61W00GM62A00GM62B00GM62D00GM62E2PGM63C00GM63C3EGM64F5E ─ ─ ─
GM61N00GM61J00GM61P00GM61Q00GM61W00GM61Z00GM62A00GM62B00BM62E2PGM63C00GM63X00GM64F5EGM64U00GM66G00
GU1480AGU1800WGU6600YGU8100WGU8100YGC1000YGC1100YGC1200C ─ ─ ─ ─ ─ ─ ─ ─ ─ ─
GU1080AGU1600YGU1800WGU1900ZGU3700YGU4175XGU4660AGU6600YGU6700YGU6900ZGU8100ZGU8400CGU8400XGU9400YGU9600YGU9900YGC1100YGC1200C
GU1280AGU1700TGU1900WGU2600KGU3000ZGU3010ZGU3185BGU3300WGU4200ZGU6200ZGU6300YGU7200ZGU7400ZGU7500ZGS4920CGA2800Z
GU1280ZGU1700TGU1700YGU2500KGU3000ZGU3400ZGU3580AGU3700YGU6200ZGU7200ZGU9600YGS5120CGA2600YGA2800Z
(B)
(C)