View
215
Download
1
Category
Preview:
Citation preview
Commercial Products
The world has changed.
Pretty is no longer enough.
Standard is no longer enough.
The world wants more.
I want more.
Today, most bath products do their job
pretty well. But just showing up for work
isn’t enough anymore. You want fixtures
that save money and water without
sacrificing an ounce of performance.
And the peace of mind that comes from
knowing you bought a brand that sets the
standards for world-class performance,
enduring quality and reliability. And, of
course, you want fixtures that can do it all
with effortless beauty. That’s what TOTO
is really all about – connecting you with
water in ways that enrich the flow of your
everyday life. It’s our passion. It’s our
mission. And it’s pure TOTO.
P E R F O R M A N C E W I T H P U R P O S E .
D E S I G N W I T H A CON S C I E N C E .
I N N OVAT I ON W I T H A H E A RT.
Q UA L I T Y YO U C A N F E E L .
QUALITY
PERFORMANCE
DESIGN
W O R L D - C L A S S P E R F O R M A N C E
With more “firsts” than anyone else, TOTO leads the world in innovating products that simply
perform better. That means peace of mind, knowing that your TOTO fixtures will perform at
the highest level, day in and day out, year after year, and look beautiful doing it.
E N L I G H T E N E D D E S I G N
TOTO showers, toilets and faucets can save 20-63% on water usage bills. You use less
water and save money without losing an ounce of performance. And TOTO is the only
plumbing manufacturer to receive the EPA’s Water Efficiency Leader Award.
E N D U R I N G Q U A L I T Y
All TOTO products pass multiple performance tests to ensure quality, reliability and
customer satisfaction. But what really matters is knowing that you’ll feel just as good about
your decision to buy TOTO next year, and the years after, as you do today.
R E A L H U M A N VA L U E
The day you install TOTO is the day you start saving with TOTO. Because with every use,
you save money and water, while gaining something of real human value – the confidence
that comes with buying the right product for all the right reasons.VALUEning something of real human value – the confidenceng something of real human value – the conf
duct for all the right reasons.ct for all the right reasons
The TOTO commercial line of toilets, urinals, sinks, EcoPower faucets and fl ush valves and hand dryers provide you with a single source to spec a full line of products. And single source specifi cation means single source responsibility.
In today’s fast paced world, the need for superior performance and reliability means everything. And when it comes to busy commercial buildings, TOTO products are the only choice. We design world-class, eco-friendly plumbing products that help you save water and money without sacrifi cing an ounce of performance. How do we do it? Our plumbing fi xtures and fi ttings are made with superior parts and go through rigorous testing to ensure unmatched performance, true water-savings and complete customer satisfaction. Faucets and fl ush valves that are powered by the sheer force of moving
water eliminate the need for routine battery replacement and constant maintenance. High Effi ciency Toilets and Urinals (HETs and HEUs) that work seamlessly together with TOTO fl ush valves to provide considerable water and energy savings.
A fi xture that performs better, lasts longer and requires less time, money and effort. That’s the TOTO goal…… to deliver real-world performance, reliability and complete peace of mind.
The Single Source For All Your Restroom Products
TOILETS URINALS
FLUSHVALVES
HANDDRYERS
SENSORFAUCETS
SINKS
Flushing Technology
TOTO’s rigorous fl ushing performance testing methods go beyond compliance and beyond industry standards, ensuring outstanding one-fl ush performance and true water savings.
Eco-friendly, superior performing fl ushing is easy to achieve with TOTO’s 1.28 GPF high-effi ciency commercial toilets and urinals. When combined with fl ushometer valves, our HEUs use an average of 0.5 GPF and the
commercial HETs can use as little as 1.28 GPF. Enjoy tremendous water savings without the maintenance and sanitary drawbacks that can be associated with waterless urinals.
EFVs use the fl owof the water to power
the entire system...
and when paired with aTOTO high-effi ciency
commercial toilet or urinal...
equals a balanced system that cannot be matched by combining different toilets and fl ush valves.
SuperiorPerformance
ReducedMaintenance
ImprovedReliability
TOTO practically invented high-effi ciency fl ushing systems, and we have always stressed how important it is to offer a balanced system. Many competitors simply change a fi ll valve or trapway size to reduce water fl ow, leaving you the option to fl ush again--or deal with the dirty consequences.
At TOTO, the toilet design, fl ushing mechanisms, water motion, glazing method and even the way that water moves are all taken into account. Our engineers optimize each fl ushing system to fi nd the best balance of all components for better performance, improved reliability and ultimately, your complete satisfaction with one of the most important products in the home.
SanaGloss
• Exclusive, advanced ceramic glaze maintains suberb cleanliness• Offers a high-gloss appearance• Helps prevent staining, scaling, rust, and lime buildup• Seals the fi xture, creating a super smooth surface to which particles will not easily cling• Forms a catalyzed ionic barrier that actually repels particles• Reduces the growth of bacteria and mold
Ceramic is porous. Microscopically, it’s full of tiny imperfections. Bacteria and particles can settle on the surface of ceramic, which can lead to stains and unsanitary conditions. SanaGloss’ super smooth surface barrier is actually baked into our ceramic glaze—not simply applied to the surface, like some less permanent
competitive products—making it an integrated, inseparable part of our toilets and lavatories. Simply, it seals the surface, forming a catalyzed, positive ionic barrier that actually repels particles. Meaning stains don’t stick around, and your bathrooms stay positively brilliant.
Without SanaGloss With SanaGloss
Developed with one simple purpose: to stay cleaner longer. Penetrating glaze—not surface coating—and ionic chemistry team to preserve and protect. For A low-maintenance lifetime.
EcoPower® Technology
Found only in TOTO sensor faucets and fl ush valves, EcoPower products are powered by water, a truly sustainable form of energy. No changing batteries that end up in landfi lls and no downtime required to install power supplies and wiring. Automatic water shut-off functionality in the faucets and the self cleaning 360° debris screen in the fl ush valves reduce maintenance costs for common problems such as continuous running, fl ooding and water waste.
EcoPower technology saves energy and provides maximum performance in even the most demanding, high-traffi c commercial spaces, making TOTO EcoPower faucets and fl ush valves a perfect conservation solution or LEED option.
Engineered to require no electricity or routine battery replacement, EcoPower technology is the perfect marriage of hands-free operation, low maintenance, easy installation and ecology.
EcoPower Faucet
Sensor eye in spout ensures consistent performance
Micro turbine that creates self generating power
Solenoid with self-cleaning diaphragm
Stainless steel debris screen at the supply bracket
Back-up battery
Electronic circuit with capacitors, power storage units
The EcoPower self-generating
hydropower system actually
gets stronger with each use,
adding years to its lifecycle.
Sensor eye
Back-up battery
Solenoid with self-cleaning diaphragm
Mechanical manual override button
Electronic circuit with capacitors, power storage units
Bronze casting
Piston with accessible 360° debris screen
Micro-Turbine that creates self generating power
EcoPower Flush Valve
Sensor-operated TOTO soap dispensor
• Automatic dispensing system• Remote installation of soap reservoir and control box• Self-adjusting “smart sensor”• Economical pre-measured foaming soap• ADA compliant
Designed to complement EcoPower sensor Faucets
Single soap reservoirFeeds three spouts
Optional fi ve-gallonreservoir available
80
SOA
P C
OST
IN
$
Major Competitors’Electronic Dispenser Soap
TOTO SOAPCommon AntibacterialManual Pump Soap
70
60
50
40
With it’s pre-measured soap
release, the TOTO soap
dispensor cost less to operate
than other soap systems.
Clean Dry Hand Dryers
This performance reduces energy use by 25% over traditional electronic hand dryers that sometimes fail to dry hands completely. Further, Clean Dry dryers are extremely quiet during operation with a low decibel rating between 58-62 dB.
Clean Dry also features washable fi lters that may be reused and help keep the room’s air fresh. Drain trays collect the water dripping from hands to prevent watermarks or slick spots on the fl oor, and the products also have special hardware to prevent vandals from removing or damaging the units.
• ADA-compliant, high-speed hand dryer• Hands-free, sensor-operated and hygienic• Innovative, air wicking technology effectively dries in 5 - 7 seconds• Uses 1/4 less energy than traditional electronic hand dryers
TOTO’s Clean Dry hand dryers are ADA-compliant and offer high-speed air for an effective, economical solution. Infrared sensor-operated, Clean Dry offers innovative air wicking technology that completely dries the user’s hands in under 12 seconds.
LEED Applicable Products
LEED is an internationally recognized green building certifi cation system that provides third-party verifi cation for a building or communities. To get maximum LEED points, a new or existing building must reach specifi ed water-usage reduction percentages to earn LEED points. The more usage reductions, the more LEED points are earned.* TOTO offers a full range of bathroom products that can help professionals in the commercial industry earn LEED points toward certifi cation:
* Refer to LEED certifi cation system maintained by the United State Green Building Council (USGBC)
1.28 HET20% Reduction
0.5 HEV with Urinal50% Reduction
1.5 HEF32% Reduction
0.08 GPC EcoPower Faucet68% Reduction
Green Building Initiative
EPA WaterSense Partner
Water Effi ciencyLeader Award
Environmental Protection Agency
LEED AP Argon Award
TOTO Demonstrates Leadership and Vision
TOTO plays a signifi cant role in leading the sustainability charge in our industry. In fact, our active role in leading policy and certifi cation organizations demonstrates how we go beyond products or practices to help ensure environmental responsibility across all company activities. • TOTO USA is the only plumbing manufacturer to receive the EPA’s Water Effi ciency Leader Award• TOTO was the fi rst plumbing products manufacturer to have employees become sustainability experts by gaining LEED Accredited Professional status• TOTO was the fi rst major plumbing products manufacturer to join the United States Green Building Council (USGBC)
Churchill DownsLouisville, Kentucky
Google HeadquartersMountainview, California
Bridgepoint HealthToronto, Ontario
Metropolitan Museum of ArtNew York, New York
SPECIFIC
ATIO
N SH
EETS
CT705EN(G)Flushometer Toilet, 1.28GPF when used with
High Effi ciency Flushometer ValveFEATURES
• Floor-mounted • Elongated front bowl• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, mold and bacteria from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.
• 10"-12" rough-in
MODELS
• CT705ENGCommercial fl oor-mounted toilet with SanaGloss ceramic glaze
• CT705ENCommercial fl oor-mounted toilet
PRODUCT SPECIFICATION
The fl oor-mounted, low consumption siphon jet fl ushing toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF fl ushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF fl ushometer valve. Toilet shall be elongated front bowl and SanaGloss ceramic glaze (CT705ENG). Toilet shall be TOTO Model CT705E______.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone (not available in SanaGloss) #12 Sedona Beige (not available in SanaGloss)
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, ASME A112.19.14
• Certifi cations: IAPMO (cUPC), State of Massachusetts, City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
ADDITIONAL ITEMS (sold separately)
• SC534 seat• SC134 seat
FLUSH VALVES
EcoPower® ManualTET1LN32#CP 1.28GPF TMT1LN32#CP 1.28GPF
TET1GNC-32 1.6GPF TMT1NNC-32 1.6GPF
TET6LN32#CP 1.28GPF
TET6GNC-32 1.6GPF
TET3LN32#SS 1.28GPF
TET3GN32#SS 1.6GPF
TET2GN32#SS 1.6GPF
TET2LN32#SS 1.28GPF
CT705EN(G)Flushometer Toilet, 1.28GPF when used with High Effi ciency 1.28GPF Flushometer Valve)
# SS-00452 v.06Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
• Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF fl ush valve)
• Flush System Siphon jet fl ushing action• Min. Water Pressure 35 psi (fl owing)• Min. Flow Rate 23 GPM• Water Surface 10-1/4" x 9-5/8"• Trap Diameter 1-7/8"• Rough-in 12", or 10"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT705EN(G) - 52.5lbs • Shipping Dimensions CT705EN(G) 26-1/2"L x 9-1/2" W1 x 16-
1/4"W2 x 17"H
14-3/8" (365mm)
9-1/8" (232mm)
1" (25.4mm)I.P.S.
4-3/4" (121mm)
26-1/2" (673mm)
15" (380mm)
12" (305mm)
10" (254mm)
15" (380mm)
3" (76mm)
5" (127mm)1-1/2" (38mm)
I.P.S.
18-1/2" (470mm)28-1/8" (714mm)
14-3/8" (365mm)
5-1/2" (140mm)
25-1/4" (642mm)
18-1/2" (470mm)26-1/8" (663mm)
14-3/8" (365mm)
5-1/2" (140mm)
25-1/4" (642mm)
1-1/2" (38mm)I.P.S.
with 10" rough-in with 12" rough-in
SPECIFICATIONS INSTALLATION NOTES
CT705ELN(G)Flushometer ADA Toilet, 1.28GPF when used with
High Effi ciency Flushometer ValveFEATURES
• Floor-mounted • ADA compliant• Elongated front bowl• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, mold and bacteria from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.
• 10"-12" rough-in
MODELS
• CT705ELNGCommercial ADA compliant, fl oor-mounted toilet with SanaGloss ceramic glaze
• CT705ELNCommercial ADA compliant fl oor-mounted toilet
PRODUCT SPECIFICATION
The fl oor-mounted, ADA compliant, low consumption siphon jet fl ushing toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF fl ushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF fl ushometer valve. Toilet shall be elongated front bowl and SanaGloss ceramic glaze (CT705ELNG). Toilet shall be TOTO Model CT705ELN______.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone (not available in SanaGloss) #12 Sedona Beige (not available in SanaGloss)
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, ASME A112.19.14,
• Certifi cations: IAPMO(cUPC), State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• ADA compliant
ADDITIONAL ITEMS (sold separately)
• SC534 seat• SC134 seat
FLUSH VALVES
EcoPower® ManualTET1LN32#CP 1.28GPF TMT1LN32#CP 1.28GPF
TET1GNC-32 1.6GPF TMT1NNC-32 1.6GPF
TET6LN32#CP 1.28GPF
TET6GNC-32 1.6GPF
TET3LN32#SS 1.28GPF
TET3GN32#SS 1.6GPF
TET2GN32#SS 1.6GPF
TET2LN32#SS 1.28GPF
SPECIFICATIONS
• Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF fl ush valve)
• Flush System Siphon jet fl ushing action• Min. Water Pressure 35 psi (fl owing)• Min. Flow Rate 23 GPM• Water Surface 10-3/4" x 9-1/4"• Trap Diameter 1-7/8"• Rough-in 12", or 10"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT705ELN(G) - 56.5lbs • Shipping Dimensions CT705ELN(G) 26-1/2"L x 9-1/2" W1 x 16-
1/4"W2 x 19-1/2"H
CT705ELN(G)Flushometer ADA Toilet, 1.28GPF when used
with High Effi ciency 1.28GPF Flushometer Valve)
with 12" rough-in
18-1/2" (470mm)
25-1/4" (642mm)
28-1/8" (714mm)
5"(127mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
1-1/2" I.P.S
12"(305mm)
18-1/2" (470mm)
25-1/4" (642mm)
with 10" rough-in
26-1/8" (663mm)
3" (76mm)
5-1/2"(140mm)
17-1/2" (445mm)
14-3/8" (365mm)
1-1/2" I.P.S
10"(254mm) 9"
(230mm)
14-3/8" (365mm)
*4-3/4" (121mm)
29"* (737mm)
1" I.P.S
# SS-00453 v.05Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
These dimensions and specifi cations are subject to change without notice
CT708E(G) & CT708EV(G)Wall-Mounted Flushometer Toilet, 1.28GPF when used with
High Effi ciency Flushometer ValveFEATURES
• Wall-mounted outlet• Elongated front bowl• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.
MODELS
• CT708ECommercial wall-mounted toilet with 1-1/2' top spud inlet, less seat
• CT708EGCommercial wall-mounted toilet with 1-1/2' top spud inlet, less seat with SanaGloss ceramic glaze
• CT708EVCommercial wall-mounted toilet with 1-1/2' back spud inlet, less seat
• CT708EVGCommercial wall-mounted toilet with 1-1/2' back spud inlet, less seat with SanaGloss ceramic glaze
• SC534 seat (sold separately)• SC134 seat (sold separately)• THU111 Retro-fi t mounting bolt cap set (4 pcs sold
separately)
PRODUCT SPECIFICATION
The wall-mounted, low consumption siphon jet fl ushing system toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF fl ushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF fl ushometer valve. Toilet shall have optional SanaGloss ceramic glaze. Toilet can be mounted at ADA height. Toilet shall be elongated front bowl. Toilet shall be TOTO Model CT708E______.
COLORS/FINISHES
• #01 Cotton #03 Bone #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO (cUPC), State of Massachusetts
, City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA Compliant
FLUSHOMETER VALVES (sold separately)
Manual EcoPower®
1.28 GPF 1.6 GPF 1.28 GPF 1.6 GPF
TMT1LN32#CP TMT1NNC-32 TET1LN32#CP TET1GNC-32#CP
TET6LN32#CP TET6GNC-32#CP
TET3LN#31#SS TET3GN#31#SS
TET2LN#31#SS TET2GN#31#SS
CT7
08E
CT7
08EV
SPECIFICATIONS
• Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF fl ush valve)
• Flush System Siphon jet fl ushing action• Min. Water Pressure 35 psi (fl owing)• Min. Flow Rate 23 GPM• Water Surface 12" x 9-1/4"• Trap Diameter 2-1/8"• Trap Seal 2-5/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT708E(G) - 49lbs
CT708EV(G) - 53.5lbs• Shipping Dimensions CT708E(G) 17-1/8"L x 16" W x 26"H
CT708EV(G)15-1/2"L x 15-1/2" W x 26-3/8"H
CT708E(G) & CT708EV(G)Wall-Mounted Flushometer Toilet, 1.28GPF when used
with High Effi ciency 1.28GPF Flushometer Valve
18-1/2" (470mm)
24-7/8" (632mm)
9"(229mm)
15-3/4"* (400mm)
5-1/2"(140mm)
*6-3/8"(162mm)
11-1/4"(285mm) 12-3/4"
(323mm)
3-1/2"(90mm)
2-3/8" (59mm) 3-7/8"
(99mm)
7-1/2"(190mm)
Finished Wall (Must be flat surface)
Finished Floor
*16"(406mm)
*17"(432mm)
*SuggestedDimension
1/16"(1.7mm)
WallGap
18-1/2" (470mm)
24-7/8" (632mm)
9"(229mm)
5-1/2"(140mm)
*6-3/8"(162mm)
*16"(406mm)
Finished Wall (Must be flat surface)
Finished Floor
2-3/4"(70mm)
1/16"(1.7mm)
WallGap
15-3/8" (390mm)
12-3/4"(323mm)
*4-3/4"(121mm)
*SuggestedDimension
11-1/2"(292mm)
2-3/8"(59mm)
7-1/2"(190mm)
1" N.P.T. supply forFlushometer valve
1-1/2"(38mm)
*17"(432mm)
# SS-00210 v.06Printed in U.S.A. | © TOTO USA 05/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
CT708E(G)
CT708EV(G)
1-3/4"(45mm)
Standardbolt cap
Wall
China China
Retrofitbolt cap
Wall
Note: If carrier bolt doesn’t extend/or is flush with china, then use retrofit caps THU111 (sold separately).
finished wall
Installation surface of bowl has 1/16” wall gapacross entire surface.
Proper Installation
Top and Bottom mounting surfaces must be in the same vertical plane.
finished wall
Improper Installation
Ø Uneven Wall Gap
Baseboard
CT708H#01Wall-Mounted, Bedpan Flushometer Toilet, 1.6GPF
FEATURES
• Wall-mounted • Elongated front bowl• Bed pan lugs
MODELS
• CT708H#01Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat
• SC534 seat (sold separately)• SC134 seat (sold separately)
PRODUCT SPECIFICATION
The wall-mounted, low consumption siphon jet fl ushing system toilet shall be 1.6GPF/6.0LPF when paired with a 1.6GPF fl ushometer valve. Toilet can be mounted at ADA height. Toilet shall be elongated front bowl and bedpan lugs. Toilet shall be TOTO model CT708H#01.
COLORS/FINISHES
• Standard #01 Cotton CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO (cUPC), State of Massachusetts,
City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA Compliant
EXPOSED FLUSHOMETER VALVES (sold separately)
Manual EcoPower®
TMT1NNC-32#CP TET1GNC-32#CP
TET6GNC-32#CP
SPECIFICATIONS
• Water Use 1.6GPF/6.0LPF • Flush System Siphon jet fl ushing action• Min. Water Pressure 20 psi (static)• Water Surface 12" x 9-1/4"• Trap Diameter 2-1/8"• Trap Seal 2-5/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT708H - 49lbs • Shipping Dimensions CT708H 16"L x 15-1/2" W x 26"H
CT708HWall-Mounted Flushometer Bedpan Toilet, 1.6GPF
18-1/2" (470mm)
*Suggested Dimension
24-1/2" (622mm)
5-1/2"(140mm)
*6-3/8"(162mm)
2-3/4"(70mm)
16"(406mm)
Finished Wall
17"(432mm)
4-3/4" (121mm)
15-3/8" (390mm)
1-1/2" (38mm)
9" (229mm)
11-1/2"(292mm)
7-1/2"(190mm)
2-5/16"(59mm)
1" N.P.T. forFlushometer Valve
12-3/4"(324mm)
# SS-00368 v.03Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
These dimensions and specifi cations are subject to change without notice
1-3/4"(45mm)
Standardbolt cap
Wall
China China
Retrofitbolt cap
Wall
Note: If carrier bolt doesn’t extend/or is flush with china, then use retrofit caps THU111 (sold separately).
finished wall
Installation surface of bowl has 1/16” wall gapacross entire surface.
Proper Installation
Top and Bottom mounting surfaces must be in the same vertical plane.
finished wall
Improper Installation
Ø Uneven Wall Gap
Baseboard
CST744E(G)(R)(B)Eco Drake® Close Coupled Toilet, 1.28GPF
FEATURES• E-Max® fl ushing system• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals.
• Close coupled commercial grade, high performance toilet
• Elongated front bowl and tank set, less seat• Chrome trip lever• 12" Rough-in, less supply
MODELS• CST744EG with SanaGloss (#01, #03, #11, #12)• CST744E Same as above less SanaGloss (#51 only)• CST744ERG with SanaGloss (#01, #03, #11, #12) and right hand
trip lever• CST744ER Same as above less SanaGloss (#01 only)and right
hand trip lever• CST744ERB* Same as CST744ER with right hand trip lever and bolt-
down tank lid (special order) (#01 Cotton only)
PRODUCT SPECIFICATIONThe two-piece E-Max fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have high-profi le tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744E____.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
COLORS/FINISHES• #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
COMPONENTS• C744EG - Elongated Front Bowl with SanaGloss• C744E - Elongated Front Bowl less SanaGloss• ST743E - Tank and Cover only - Left-hand trip lever• ST743ER - Tank and Cover only - Right-hand trip lever• ST743ERB - Tank and Cover only - Right-hand trip
lever and bolt-down lid (#01 Cotton only)• SS114 SoftClose® seat (sold separately)• SC134 Commercial seat (sold separately)• SC534 Commercial seat (sold separately)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF • Flush System E-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/2"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C744E(G) - 52lbs
ST743E(R)(B) - 35lbs• Shipping Dimensions C744E(G) 29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
ST743E(R)(B) 20-1/8"L x 8-1/4"W
x 15-1/2"H
CST744E(G)(R)(B)Eco Drake® Close Coupled Toilet, 1.28GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00215 v.05Printed in U.S.A. | © TOTO USA 02/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
14-5/8"(370mm)
12" (305mm)
28" (710mm)
18-1/2" (470mm)
1-1/8"(30mm)
5-1/2" (140mm)14"
(355mm)
19-1/2" (494mm)
9" (228mm)
28-1/2"(724mm)
*8"(202mm)
1/2" Supply
*6"(153mm)
CST744EF(R).10Eco Drake® Close Coupled Toilet, 1.28GPF, 10" Rough-In
FEATURES
• E-Max® fl ushing system, low consumption (1.28GPF/4.8LPF)
• Universal Height• Two-piece design with high-profi le tank• Elongated front bowl and tank set, less seat• ADA compliant• Chrome trip lever• 10" Rough-in, less supply
MODELS
• CST744EF.10#01 Elongated bowl, 10" rough-in, less seat
• CST744EFR.10#01 Same as above with right hand trip lever
PRODUCT SPECIFICATION
The two-piece low consumption E-Max fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be at universal height and be ADA compliant. Toilet shall have high-profi le tank, elongated front bowl and Chrome trip lever. Toilet shall be TOTO Model CST744EF____#01.
COLORS/FINISHES
• Standard #01 Cotton
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
• ADA compliant (when installed with trip lever located on the approach side)
COMPONENTS
• C744EF.10 - Elongated Front Bowl, 10" rough-in• ST743E - Tank and Cover only - Left-hand trip lever• ST743ER - Tank and Cover only - Right-hand trip lever
• SS114 SoftClose® seat (sold separately)• SC134 commercial seat (sold separately)• SC534 commercial seat (sold separately)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF• Flush System E-Max• Min. Water Pressure 8 psi (static)• Water Surface 7-7/8" x 10-5/16"• Trap Diameter 2-1/8"• Rough-in 10" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C744EF.10 48 lbs.
ST743E(R) 32 lbs.• Shipping Dimensions C744EF.10 29" L X 15" W1 X
10-1/2" W2 X 17-1/8" H
ST743E(R) 18" L X 9" W X 16" H
CST744EF(R).10Eco Drake® Close Coupled Toilet, 1.28GPF
17-1
/4” (
438m
m)
28” (713mm)
14”
(355
mm
)
18-1/2” (470mm)
5-1/
2”(1
40m
m)
3/4”(20mm)
10”(254mm)
* SUGGESTED DIMENSION
*8”
(230
mm
)
9-7/8” (251mm)
30-1
/8” (
756m
m)
19-1/2” (494mm)
6” (153mm)
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
d
# SS-00448 v.03Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
CST744ELEco Drake® Close Coupled Toilet, ADA, 1.28GPF
FEATURES
• E-Max® fl ushing system, low consumption (1.28GPF/4.8LPF)
• Universal Height• Two-piece design with high-profi le tank• Elongated front bowl and tank set, less seat• Chrome trip lever• 12" Rough-in, less supply• ADA compliant
MODELS
• CST744EL Elongated bowl, 12" rough-in, less seat
• CST744ELR* Same as CST744EL with right hand trip lever (special order)
• CST744ELRB* Same as CST744EL with right hand trip lever and bolt-
down tank lid (special order) (#01 Cotton only)
PRODUCT SPECIFICATION
The two-piece E-Max fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be universal height and ADA compliant. Toilet shall have high-profi le tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744EL____.
COLORS/FINISHES
• #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
• ADA compliant (when installed with trip lever located on the approach side)
COMPONENTS
• C744EL - Elongated Front Bowl• ST743E - Tank and Cover only - Left-hand trip lever• ST743ER - Tank and Cover only - Right-hand trip lever• ST743ERB - Tank and Cover only - Right-hand trip
lever and bolt-down tank lid (#01 Cotton only)
• SS114 SoftClose® seat (sold separately)• SS204 SoftClose® seat (sold separately)• SC134 commercial seat (sold separately)• SC534 commercial seat (sold separately)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF • Flush System E-Max• Min. Water Pressure 8 psi (static)• Water Surface 10-3/8" x 8-1/4"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C744EL - 56.5lbs
ST743E(R)(B) - 35lbs• Shipping Dimensions C744EL 29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
ST743E(R)(B)20-1/8"L x 8-1/4"W x 15-1/2"H
CST744ELEco Drake® Close Coupled Toilet, ADA, 1.28GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00214 v.05Printed in U.S.A. | © TOTO USA 02/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
16-1/2"(420mm)
12" (305mm)
28" (710mm)
18-1/2" (470mm)1-1/4"
(30mm)
5-1/2"(140mm)
14"(355mm)
17-1/2"(445mm)
19-1/2" (494mm)
9-7/8"(250mm)
30-1/2"(775mm)
8"* (202mm)
1/2" Supply
6"*(153mm)
CST743EEco Drake® Close Coupled Toilet, 1.28GPF
FEATURES
• E-Max® fl ushing system• Close coupled, high performance toilet• Round front bowl and tank set, less seat• Chrome trip lever• 12" Rough-in, less supply
MODELS
• CST743E Round bowl, 12" rough-in, less seat
• CST743ER Same as CST743E with right hand trip lever (special order)
• CST743ERB* Same as CST743ER with right hand trip lever and bolt-
down tank lid (special order) (#01 Cotton only)
PRODUCT SPECIFICATION
The two-piece G-Max fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have high-profi le tank, round front bowl and chrome trip lever. Toilet shall be TOTO Model CST743E____.
COLORS/FINISHES
• #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
COMPONENTS
• C743E - Round Front Bowl• ST743S - Tank and Cover only - Left-hand trip lever• ST743SR - Tank and Cover only - Right-hand trip lever• ST743SRB - Tank and Cover only - Right-hand trip
lever and bolt-down lid (#01 Cotton only)
• SS113 SoftClose® seat (sold separately)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF • Flush System E-Max• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/2"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C743E - 53lbs
ST743S(R)(B) - 35lbs• Shipping Dimensions C743E 27-3/4"L x 15"W1
x 10-1/4"W2 x 15-3/4"H
ST743S (R)(B)20-1/8"L x 8-1/4"W x 15-1/2"H
CST743EEco Drake® Close Coupled Toilet, 1.28GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00354 v.04Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
12"(305 mm)
14-5/8"(370 mm)
14"(355 mm)
16-1/2" (420 mm)
3/4"(20 mm)
5-1/2"(140 mm)
26-3/8" (670 mm) 19-1/2" (494 mm)
28-1/2"(724 mm)
*8"(203mm)
1/2" Supply
*6"(152mm) * Suggested Dimension
CST744S(G)Drake® Close Coupled Toilet, 1.6GPF
FEATURES
• G-Max® fl ushing system• Optional SanaGloss® ceramic glaze - SanaGloss glaze
prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.
• Close coupled commercial grade, high performance toilet
• Elongated front bowl and tank set, less seat• Chrome trip lever• 12" Rough-in, less supply
MODELS
• CST744SG Elongated bowl, SanaGloss, 12" rough-in, less seat• CST744S Same as above less SanaGloss• CST744SB* Same as CST744S with bolt down lid (special order)• CST744SD* Same as CST744S with insulated tank (special order)• CST744SDB* Same as CST744S with bolt down lid & insulated tank
(special order)• CST744SR* Same as CST744S with right hand trip lever (special order)
COMPONENTS
• C744SL - Elongated Front Bowl• ST743S - Tank and Cover only• ST743SB - Tank and Cover only (bolt down lid)• ST743SD - Tank and Cover only (insulated tank)• ST743SDB - Tank and Cover only (bolt down lid and
insulated tank)• ST743SR - Tank and Cover only (right hand trip lever)
• SS114 SoftClose® seat (sold separately)• SS204 SoftClose® seat (sold separately)• SC134 commercial seat (sold separately)• SC534 commercial seat (sold separately)
PRODUCT SPECIFICATION
The two-piece G-Max fl ushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall have high-profi le tank, elongated front bowl and chrome trip lever. Toilet model CST744SG shall have SanaGloss ceramic glaze. Toilet shall be TOTO Model CST744S____.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of Massachusetts ,
City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada, and
others
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
SPECIFICATIONS
• Water Use 1.6 GPF/6.0LPF • Flush System G-Max• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/2"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C744E(G) - 52lbs
ST743S - 35lbs• Shipping Dimensions C744E(G) 29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
ST743S20-1/8"L x 8-1/4"W x 15-1/2"H
CST744S(G)Drake® Close Coupled Toilet, 1.6GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00351 v.03Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
14-5/8"(370mm)
12" (305mm)
28" (710mm)
18-1/2" (470mm)
1-1/8"(30mm)
5-1/2" (140mm)14"
(355mm)
19-1/2" (494mm)
9"(228mm)
28-1/2"(724mm)
*8"(202mm)
1/2" Supply
*6"(153mm)
CST744SF(R).10Drake® Close Coupled Toilet, 1.6GPF, 10" Rough-In
FEATURES
• G-Max® fl ushing system, low consumption (1.6GPF/6.0LPF)
• Universal Height• Two-piece design with high-profi le tank• Elongated front bowl and tank set, less seat• ADA compliant• Chrome trip lever• 10" Rough-in, less supply
MODELS
• CST744SF.10#01 Elongated bowl, 10" rough-in, less seat
• CST744SFR.10#01 Same as above with right hand trip lever
PRODUCT SPECIFICATION
The two-piece G-Max fl ushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be at universal height and be ADA compliant. Toilet shall have high-profi le tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744SF__.10#01.
COLORS/FINISHES
• Standard #01 Cotton
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant (when installed with trip lever
located on the approach side)
COMPONENTS
• CT744EF.10 - Elongated Front Bowl, 10" rough-in• ST743S - Tank and Cover only - Left-hand trip lever• ST743SR - Tank and Cover only - Right-hand trip lever
• SS114 SoftClose® seat (sold separately)• SC134 seat (sold separately)• SC534 seat (sold separately)
SPECIFICATIONS
• Water Use 1.6 GPF/6.0LPF • Flush System G-Max• Min. Water Pressure 8 psi (static)• Water Surface 10-5/16" x 7-7/8"• Trap Diameter 2-1/8"• Rough-in 10" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT744EF.10 - 48lbs
ST744S(R) - 32lbs• Shipping Dimensions CT744EF.10 29-"L x 15"W1 x 10-1/2"W2
x 17-1/8"H
ST743S(R) 18"L x 9"W x 16"H
CST744SF(R).10Drake® Close Coupled Toilet, 1.6GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00451 v.03Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
17-1
/4” (
438m
m)
28” (713mm)
14”
(355
mm
)
18-1/2” (470mm)
5-1/
2”(1
40m
m)
3/4”(20mm)
10”(254mm)
* SUGGESTED DIMENSION
*8”
(230
mm
)
9-7/8” (251mm)
30-1
/8” (
756m
m)
19-1/2” (494mm)
6” (153mm)
CST744SLDrake® Close Coupled Toilet, ADA, 1.6GPF
FEATURES
• G-Max® fl ushing system, low consumption (1.6GPF/6.0LPF)
• Universal Height• Two-piece design with high-profi le tank• Elongated front bowl and tank set, less seat• Chrome trip lever• 12" Rough-in, less supply• ADA compliant
MODELS
• CST744SL Elongated bowl, 12" rough-in, less seat• CST744SLB* Same as above with bolt down lid (special order)• CST744SLD* Same as CST744SL with insulated tank (special order)• CST744SLDB* Same as CST744SL with bolt down lid & insulated
tank (special order)• CST744SLR* Same as CST744SL with right hand trip lever (special order)
PRODUCT SPECIFICATION
The two-piece G-Max fl ushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be universal height and ADA compliant. Toilet shall have high-profi le tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744SL____.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant (when installed with trip lever
located on the approach side)
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
COMPONENTS
• C744EL - Elongated Front Bowl• ST743S - Tank and Cover only - Left-hand trip lever• ST743SR - Tank and Cover only - Right-hand trip lever
• SS114 SoftClose® seat (sold separately)• SS204 SoftClose® seat (sold separately)• SC534 Seat (sold separately)• SC134 Seat (sold separately)
SPECIFICATIONS
• Water Use 1.6 GPF/6.0LPF • Flush System G-Max• Min. Water Pressure 8 psi (static)• Water Surface 10-3/8" x 8-1/4"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C744EL - 56.5lbs
ST743S - 35lbs• Shipping Dimensions C744EL 29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
ST743S20-1/8"L x 8-1/4"W x 15-1/2"H
CST744SLDrake® Close Coupled Toilet, ADA, 1.6GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00350 v.04Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
16-1/2"(420mm)
12" (305mm)
28" (710mm)
18-1/2" (470mm)1-1/4"
(30mm)
5-1/2"(140mm)
14"(355mm)
17-1/2"(445mm)
19-1/2" (494mm)
9-7/8"(250mm)
30-1/2"(775mm)
8"* (202mm)
1/2" Supply
6"*(153mm)
CST743SDrake® Close Coupled Toilet, 1.6GPF
FEATURES
• G-Max® fl ushing system• Close coupled, high performance toilet• Round front bowl and tank set, less seat• Chrome trip lever• 12" Rough-in, less supply
MODELS
• CST743S Round bowl, 12" rough-in, less seat
• CST743SB* Same as CST743S with bolt down lid (special order)
• CST743SD* Same as CST743S with insulated tank (special order)
• CST743SDB* Same as CST743S with bolt down lid & insulated
tank (special order)
• CST743SR* Same as CST743S with right hand trip lever (special order)
PRODUCT SPECIFICATION
The two-piece G-Max fl ushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall have high-profi le tank, round front bowl and chrome trip lever. Toilet shall be TOTO Model CST743S____.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
COMPONENTS
• C743E - Round Front Bowl• ST743S - Tank and Cover only - Left-hand trip lever• ST743SB - Tank and Cover only - Bolt down lid• ST743SD - Tank and Cover only - Insulated tank• ST743SDB - Tank and Cover only - Bolt down lid and
insulated tank• ST743SR - Tank and Cover only - Right-hand trip lever
• SS113 SoftClose® seat (sold separately)
SPECIFICATIONS
• Water Use 1.6 GPF/6.0LPF • Flush System G-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/2"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C743E - 53lbs
ST743S - 35lbs• Shipping Dimensions C743E 27-3/4"L x 15"W1
x 10-1/4"W2 x 15-3/4"H
ST743S 20-1/8"L x 8-1/4"W
x 15-1/2"H
CST743SDrake® Close Coupled Toilet, 1.6GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00355 v.04Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
12"(305 mm)
14-5/8"(370 mm)
14"(355 mm)
16-1/2" (420 mm)
3/4"(20 mm)
5-1/2"(140 mm)
26-3/8" (670 mm) 19-1/2" (494 mm)
28-1/2"(724 mm)
*8"(203mm)
1/2" Supply
*6"(152mm) * Suggested Dimension
CST454CEF(R)(G)Drake® II Close Coupled Toilet, 1.28GPF
FEATURES
• Double Cyclone® fl ushing system, low consumption (1.28GPF/4.8LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals.
• Universal Height• Decorative two-piece design with high-profi le tank• Elongated front bowl and tank set, less seat• Chrome trip lever• 12" Rough-in, less supply
MODELS
• CST454CEFG With SanaGloss ceramic glaze
• CST454CEF
PRODUCT SPECIFICATION
The Two-piece low consumption Double Cyclone fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have optional SanaGloss ceramic glaze and be at Universal Height. Toilet shall have high-profi le tank, elongated front bowl and Chrome trip lever. Toilet shall be TOTO Model CST454CEF____.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense, State
of Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative Compliance: California AB715,
California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
• ADA compliant (when installed with trip lever located on the approach side)
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony (not available in SanaGloss)
COMPONENTS
• C454CEFG Elongated bowl with SanaGloss• C454CEF Elongated bowl, less SanaGloss• ST454E Tank and cover only• ST454ER Tank and cover only, right-hand trip lever
• SS224 SoftClose® seat (sold separately)• SS214 SoftClose® seat (sold separately)• SS204 SoftClose® seat (sold separately)• SS114 SoftClose® seat (sold separately)• SC534 Commercial seat (sold separately)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF• Flush System Double Cyclone• Min. Water Pressure 8 psi (static)• Water Surface 7-1/8" x 9-1/8"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-1/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight C454CEF(G) 57.3lbs.
ST454E(R) 31.5lbs.• Shipping Dimensions C454CEF(G) 29" L X 14-3/4" W1 X
11-1/2" W2 X 16-1/4" H
ST454E(R) 18" L X 9" W X 16" H
CST454CEF(R)(G)Drake® II Close Coupled Toilet, 1.28GPF
28-5/16”(720mm)
18-1/2”(470mm)
14”(356mm)
5-1/2”(140mm)
13/16”(20mm)
17-1/4”(439mm)
12”(305mm) * SUGGESTED
DIMENSION
*8”(203mm)
*5-7/8”(150mm)
9-7/8”(251mm)
16-1/2”(419mm)
30”(762mm)
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
d
SS-00239 v.09Printed in U.S.A. | © TOTO USA 05/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
MS854114E(G)/MS853113EEco UltraMax® One-Piece Toilet, 1.28GPF
FEATURES
• E-Max® fl ushing system, low consumption (1.28GPF/4.8LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals.
• One-piece decorative toilet with high-profi le tank• Elongated front bowl with SoftClose® seat (SS114)
or round front bowl with SoftClose® seat (SS113) • 12" Rough-in• Chrome trip lever
MODELS
• MS854114EGElongated bowl with SanaGloss and SoftClose seat (SS114)
• MS854114EElongated bowl with SoftClose seat (SS114)
• MS853113ERound bowl with SoftClose seat (SS113)
PRODUCT SPECIFICATION
The one-piece low consumption E-Max fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be of elongated front bowl (MS854) or round front bowl (MS853) with a high-profi le tank and SoftClose seat. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall have chrome trip lever. Toilet shall be TOTO Model MS85____________.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
SPECIFICATIONS
• Water Use 1.28 GPF/4.8 LPF• Flush System E-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/4"• Trap Diameter 2-1/8"• Rough-in 12"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight MS854114E(G) 93 lbs.
MS853113E 91 lbs.
• Shipping Dimensions 30-3/4" L x 18-1/8"W x 27-1/8" H
MS854114E(G)/MS853113EEco UltraMax® One-Piece Toilet, 1.28GPF
5-1/2”(140mm)
3/4”(20mm)
27-1/8”(690mm)
14-5/8”(370mm)
Finished Wall
FinishedFloor
18-1/2” (470mm)
12” (305mm)
16-1/2” (420mm)MS854114E(G)MS853113E
28” (710mm)26-1/2” (675mm)
MS854114E(G)MS853113E
5-1/8”(130mm)
1/2”supply
*5”(127mm) Finished
Floor
16-1/2”(420mm)
9-7/8” (250mm)8-5/8” (220mm)
MS854114E(G)
* Suggested Dimension
MS853113E
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00206 v.04Printed in U.S.A. | © TOTO USA 08/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
MS854114EL(G)(R)Eco UltraMax® One-Piece Toilet, ADA Height, 1.28GPF
FEATURES
• E-Max® fl ushing system, low consumption (1.28GPF/4.8LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals.
• One-piece decorative toilet with high-profi le tank• Elongated front bowl with SoftClose® seat (SS114) • 12" Rough-in• ADA compliant (when installed with trip lever
located on the approach side)• Chrome trip lever
MODELS
• MS854114ELGADA height toilet with elongated bowl, SanaGloss and SoftClose seat (SS114)
• MS854114ELADA height toilet with elongated bowl and SoftClose seat (SS114)
• MS854114ELR#01ADA height toilet with elongated bowl, right hand trip lever and SoftClose seat (SS114)
PRODUCT SPECIFICATION
The one-piece low consumption E-Max fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be of elongated front bowl (MS854) with a high-profi le tank and SoftClose seat. Toilet shall be ADA compliant (when installed with trip lever located on the approach side). Toilet shall have chrome trip lever. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall be TOTO Model MS854114EL_____.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
• ADA compliant (when installed with trip lever located on the approach side)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8 LPF• Flush System E-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/4"• Trap Diameter 2-1/8"• Rough-in 12"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight MS854114EL(G) 117 lbs.
• Shipping Dimensions 32" L x 20"W x 17-3/4" H1x 28-3/4" H2
MS854114EL(G)Eco UltraMax® One-Piece Toilet, ADA Height, 1.28GPF
5-1/2”(140mm)
1”(25mm)
29-1/4”(740mm)
17-1/4”(440mm)
Finished Wall
FinishedFloor
18-1/2” (470mm)
12” (305mm)
28-1/4” (715mm)
5-1/8”(130mm)
1/2”supply
*5”(127mm) Finished
Floor
16-1/2”(420mm)
9-3/4” (250mm)
* Suggested Dimension
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00207 v.05Printed in U.S.A. | © TOTO USA 08/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
MS854114S(G)/MS853113SUltraMax® One-Piece Toilet, 1.6GPF
FEATURES
• G-Max® fl ushing system, low consumption (1.6GPF/6.0LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals.
• One-piece decorative toilet with high-profi le tank• Elongated front bowl with SoftClose® seat (SS114)
or round front bowl with SoftClose® seat (SS113) • 12" Rough-in• Chrome trip lever
MODELS
• MS854114SGElongated bowl with SanaGloss and SoftClose seat (SS114)
• MS854114SElongated bowl with SoftClose seat (SS114)
• MS853113SRound bowl with SoftClose seat (SS113)
PRODUCT SPECIFICATION
The one-piece G-Max fl ushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be of elongated front bowl (MS854) or round front bowl (MS853) with a low-profi le tank and SoftClose seat. Toilet shall have chrome trip lever. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall be TOTO Model MS85____________.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
SPECIFICATIONS
• Water Use 1.6 GPF/6.0LPF• Flush System G-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/4"• Trap Diameter 2-1/8"• Rough-in 12"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight MS854114S(G) 93 lbs.
MS853113S(G) 91 lbs.
• Shipping Dimensions 30-3/4" L x 18-1/8"W x 27-1/8" H
MS854114S(G)/MS853113SUltraMax® One-Piece Toilet, 1.6GPF
5-1/2”(140mm)
3/4”(20mm)
27-1/8”(690mm)
14-5/8”(370mm)
Finished Wall
FinishedFloor
18-1/2” (470mm)
12” (305mm)
16-1/2” (420mm)MS854114S(G)MS853113S(G)
28” (710mm)26-1/2” (675mm)
MS854114S(G)MS853113S(G)
5-1/8”(130mm)
1/2”supply
*5”(127mm) Finished
Floor
16-1/2”(420mm)
9-7/8” (250mm)8-5/8” (220mm)
MS854114S(G)
* Suggested Dimension
MS853113S(G)
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00160 v.05Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
MS854114SLUltraMax® One-Piece Toilet, ADA Height, 1.28GPF
FEATURES
• G-Max® fl ushing system, low consumption (1.6GPF/6.0LPF)
• One-piece decorative toilet with high-profi le tank• Elongated front bowl with SoftClose® seat (SS114) • 12" Rough-in• ADA compliant (when installed with trip lever
located on the approach side)• Chrome trip lever
MODELS
• MS854114SLADA height toilet with elongated bowl and SoftClose seat (SS114)
PRODUCT SPECIFICATION
The one-piece low consumption G-Max fl ushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be of elongated front bowl with a high-profi le tank and SoftClose seat. Toilet shall be ADA compliant (when installed with trip lever located on the approach side). Toilet shall have chrome trip lever. Toilet shall be TOTO Model MS854114SL_____.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant (when installed with trip lever
located on the approach side)
SPECIFICATIONS
• Water Use 1.6 GPF/6.0 LPF• Flush System G-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-5/16" x 8-1/4"• Trap Diameter 2-1/8"• Rough-in 12"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 99 lbs.
• Shipping Dimensions 32"L x 20"W x 17-3/4" H1 x 28-3/4" H2
MS854114SLUltraMax® One-Piece Toilet, ADA Height, 1.28GPF
5-1/2”(140mm)
1”(25mm)
29-1/4”(740mm)
17-1/4”(440mm)
Finished Wall
FinishedFloor
18-1/2” (470mm)
12” (305mm)
28-1/4” (715mm)
5-1/8”(130mm)
1/2”supply
*5”(127mm) Finished
Floor
16-1/2”(420mm)
9-3/4” (250mm)
* Suggested Dimension
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
# SS-00370 v.03Printed in U.S.A. | © TOTO USA 08/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
MS604114CEF(R)(G)UltraMax® II One-Piece Toilet, 1.28GPF
FEATURES
• Double Cyclone® fl ushing system, low consumption (1.28GPF/4.8LPF)
• SanaGloss® ceramic glaze - SanaGloss glaze prevents debris and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning
• Universal Height• Decorative one-piece design with high-profi le tank• Elongated front bowl with SoftClose® seat (SS114) • 12" rough-in• Chrome trip lever
MODELS
• MS604114CEFG With SanaGloss ceramic glaze, SS114 SoftClose
seat included (#01, #03, #11, #12)
• MS604114CEFRG Same as above, with right-hand trip lever (#01)
• MS604114CEFLess SanaGloss, SS114 SoftClose seat included (#51)
PRODUCT SPECIFICATION
The one-piece low consumption double cyclone fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have SanaGloss ceramic glaze (except #51 Ebony) and be at Universal Height. Toilet shall have high-profi le tank, elongated front bowl with SoftClose seat and Chrome trip lever. Toilet shall be TOTO Model MS604114CEF_____.
COLORS/FINISHES
• #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony (not available in SanaGloss)
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
• ADA compliant (when installed with trip lever located on the approach side)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF• Flush System Double Cyclone• Min. Water Pressure 8 psi (static)• Water Surface 7-1/8" x 9-1/8"• Trap Diameter 2-1/8"• Rough-in 12" • Trap Seal 2-1/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 99 lbs.• Shipping Dimensions 32"L x 20"W x 17-3/4" H1 x
28-3/4" H2
MS604114CEF(R)(G)UltraMax® II One-Piece Toilet, 1.28GPF
3/4”(20mm)
5-1/
2”(1
40m
m)
28-5/16”(720mm)
6-3/16”(158mm)
16-1/8”(410mm)
17-1/4”(438mm)
12”(305mm)
15-11/16”(399mm)
* Suggested Dimensions
9-13/16”(250mm)
28-3/4”(730mm)
16-9/16”(420mm)
1/2” (12mm)Supply*
6”(152mm)
5”(127mm)
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
d
#SS-00162 v.05Printed in U.S.A. | © TOTO USA 05/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
CST794EFEco Nexus® Close Coupled Toilet, 1.28GPF
FEATURES
• E-Max® fl ushing system, low consumption (1.28GPF/4.8LPF)
• Elongated skirted design• Universal Height• Decorative two-piece design with high-profi le tank• Chrome trip lever• 12" Rough-in
MODELS
• CST794EF
PRODUCT SPECIFICATION
The two-piece low consumption E-Max fl ushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have high-profi le tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST794EF____.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), EPA Watersense, State
of Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative Compliance: California AB715,
California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
• ADA compliant (when installed with trip lever located on the approach side)
COMPONENTS
• CT794EFElongated bowl
• ST794ETank and cover only
• ST794ER#01Tank and cover only, right-hand trip lever
• SS204 SoftClose® seat (sold separately)• SS114 SoftClose® seat (sold separately)• SS304 SoftClose® maple seat (sold separately)
SPECIFICATIONS
• Water Use 1.28 GPF/4.8LPF • Flush System E-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/4"• Trap Diameter 2-1/16"• Rough-in 12" • Trap Seal 2-1/4"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT794EF - 62lbs
ST794E - 36.5lbs• Shipping Dimensions CT794EF 29-3/4"L x 16-1/2"W
x 24-3/4"H
ST794E20-3/8"L x 8-3/8"Wx 19-5/8"H
CST794EFEco Nexus® Close Coupled Toilet, 1.28GPF
14-1/2"(368mm)
17-1/8"(435mm)
7-1/4" (185mm)
12" (305mm)
5-1/
2"(1
40m
m)
3/4"(20mm)
28"(710mm) 18-1/2"
(470mm)
32-1/2"(824mm)
4-1/2" (114mm)*
17-7/8" (454mm)
4" (102mm)**SuggestedDimensions
1/2" Supply
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
#SS-00366 v.04Printed in U.S.A. | © TOTO USA 03/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
CST794SFNexus® Close Coupled Toilet, 1.6GPF
FEATURES
• G-Max® fl ushing system, low consumption (1.6GPF/6.0LPF)
• Elongated skirted design• Universal Height• Decorative two-piece design with high-profi le tank• Chrome trip lever• 12" rough-in
PRODUCT SPECIFICATION
The two-piece G-Max fl ushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be universal height and ADA compliant. Toilet shall have high-profi le tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST794SF____.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant (when installed with trip lever
located on the approach side)
MODELS
• CST794SF
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony
COMPONENTS
• CT794EFElongated bowl
• ST794STank and cover only
• ST794SR#01Tank and cover only, right-hand trip lever
• SS204 SoftClose® seat (sold separately)• SS114 SoftClose® seat (sold separately)• SS304 SoftClose® maple seat (sold separately)
SPECIFICATIONS
• Water Use 1.6 GPF/6.0LPF • Flush System G-Max®
• Min. Water Pressure 8 psi (static)• Water Surface 10-1/4" x 8-1/4"• Trap Diameter 2-1/16"• Rough-in 12" • Trap Seal 2-1/4"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT794EF - 62lbs
ST794S - 36.5lbs• Shipping Dimensions CT794EF 29-3/4"L x 16-1/2"W
x 24-3/4"H
ST794S 20-3/8"L x 8-3/8"W
x 19-5/8"H
CST794SFNexus® Close Coupled Toilet, 1.6GPF
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
#SS-00164 v.05Printed in U.S.A. | © TOTO USA 03/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
These dimensions and specifi cations are subject to change without notice
14-1/2"(368mm)
17-1/8"(435mm)
7-1/4" (185mm)
12" (305mm)
5-1/
2"(1
40m
m)
3/4"(20mm)
28"(710mm) 18-1/2"
(470mm)
32-1/2"(824mm)
4-1/2" (114mm)*
17-7/8" (454mm)
4" (102mm)**SuggestedDimensions
1/2" Supply
CT418FGAquia® Wall-Hung Dual-Flush Toilet, 1.6GPF & 0.8GPF
FEATURES
• Dual-Max® fl ushing system, low consumption (1.6GPF/6.0LPF & 0.8GPF/3.0LPF)
• SanaGloss® ceramic glaze - prevents debris, mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.
• Universal Height• Wall-hung toilet can be paired with TOTO in-wall
tank system as well as others• Can be mounted at standard or ADA height
MODELS
• CT418FG#01
• SS204 SoftClose® seat (sold separately)• SS114 SoftClose® seat (sold separately)• SC134 commercial seat (sold separately)• SC534 commercial seat (sold separately)
• WT151M In-wall tank system (pex pipe) (sold separately)
• WT152M In-wall tank system (copper pipe) (sold separately)
PRODUCT SPECIFICATION
This universal height, low consumption Dual-Max fl ushing system toilet shall be 1.6GPF & 0.8GPF. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall be mounted to in-wall tank system, elongated front bowl and wall-mounted push-button type trip lever. Toilet can be mounted at ADA height. Toilet shall be TOTO Model CT418FG#01.
COLORS/FINISHES
• Standard #01 Cotton
CODES/STANDARDS
• Meets or exceeds ASME A112.19.2/CSA B45.1, ASME A112.19.14
• Certifi cations: IAPMO (cUPC), EPA Watersense, State of Massachusetts , City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Effi ciency Ordinance
• ADA compliant (center mount actuator/trip lever is approach side neutral*) * consult with your local jurisdiction for special requirements
SPECIFICATIONS
• Water Use 1.6 GPF & 0.8GPF (6.0 LPF & 3.0LPF)
• Flush System Dual-fl ush• Min. Water Pressure 8 psi (static)• Water Surface 5.5" X 4.75"• Trap Diameter 2-1/8"• Installation Height 15" to 19"• Trap Seal 2-1/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT418FG - 66.5lbs• Shipping Dimensions CT418FG
23-3/4" L X 15-3/4"W X 17.5" H
CT418FGAquia® Wall-Hung Dual-Flush Toilet, 1.6GPF & 0.8 GPF
ø2-3/16"(ø55mm)
ø5-5/16"(ø135mm)
ø4"(ø102mm)
ø1" (ø25mm)
7-1/16" (180mm)
1-3/8"(35mm)
15" - 19"(380mm - 480mm)
3-9/16"(90mm)
21-1/16" (535mm)
14-3/16"(360mm)
1-1/8"(29mm)
1/16" Wall Gap
# SS-00456 V.02Printed in U.S.A. | © TOTO USA 12/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
These dimensions and specifi cations are subject to change without notice
finished wall
Back of toilet even with installation surface.1/16” Wall gap
finished wall
Proper Installation
Improper Installation
Ø Uneven Wall Gap
Baseboard
WT151M / WT152MDuoFit™ In-Wall Tank System, 1.6GPF & 0.9GPF
FEATURES
• Dual-Max fl ushing system, low consumption (1.6GPF/6.0LPF & 0.9GPF/3.4LPF) Avg. fl ush 1.28GPF
• Adjustable 15"-19" mounting height• Saves up to 9" of fl oor space compared to
standard fl oor-mounted toilet• Support up to 880lbs• Commercial 2" x 6" or optional residential installa-
tion with 2" x 4" wall studs with waste outlet kit• 1-pc blow molded polyethylene tank to prevent
leaks• 2" x 6" Polyethylene outlet included• Pre-plumbed for optional Washlet® connection• Complete with #01 Cotton bolt caps
MODELS
• WT151M - with Pex-C washlet supply line• WT152M - with copper washlet supply line• WT151800M#WH - with Pex-C washlet supply line
and YT800#WH white push plate• WT152800M#WH - with copper washlet supply line
and YT800#WH white push plate
Optional Push Plates (sold separately)• YT800#WH - White• YT820#SS - Brushed Stainless Steel• YT820#CP - Polished Chrome• YT830#WH- Glass/White
Optional Outlets (sold separately)• THU343 2" x 4" outlet PVC• THU335 2" x 6" outlet cast iron
• CT418FG Aquia® wall-hung toilet by TOTO (sold separately)
PRODUCT SPECIFICATION
This universal height, high-effi ciency, dual fl ushing, in-wall tank system toilet shall be 1.6GPF & 0.9GPF. Requires TOTO toilet model CT418FG. In-Wall tank system shall be TOTO Model WT15_________M____.
CODES/STANDARDS
• Meets and exceeds o Carrier system: ASME A112.6.2 o Tank trim: IAPMO PS50, CSA B125.3,
ASSE1002 • Certifi cations: IAPMO(cUPC), and others • Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Shall be WaterSense
certifi ed
White Brushed Stainless Steel orPolished Chrome
Glass/White
SPECIFICATIONS
• Water Use 1.6 GPF & 0.9GPF (6.0 LPF & 3.4LPF)
• Flush System Dual-Max• Min. Water Pressure 8 psi (static)• Installation Height 15" to 19" (projected range)• Warranty One Year Limited Warranty• Material Various• Shipping Weight WT151M / WT152M - 38lbs. • Shipping Dimensions WT151M / WT152M
48" x 26-1/2" x 6"
WT151M / WT152MDuoFit™ In-Wall Tank System, 1.6GPF & 0.9 GPF
# SS-00545 V.02Printed in U.S.A. | © TOTO USA 12/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
INSTALLATION NOTES
These dimensions and specifi cations are subject to change without notice
FFL
3-1/2"
15" 19
"
2"
2" x 4"or 2” x 6"
2" x 4"or 2” x 6"
16" 16"
10"
12.7" 12.7"
44-1
/2" -
52”
Shown withCT418FG
2" x 6" installationwith 6" cast-iron drain
FinishedFloor
3-1/2"
5-1/2"
1/2" NPTWater
Supply
9" of space saved over traditional
fl oor-mounted toilet
YT830Round Push Plate - Dual Button
FEATURES
• Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M)
PRODUCT SPECIFICATION
Push plate shall be model # YT830#WH. Push plate shall be glass with 2 white actuators on the front. Push plate shall be mounted to in-wall tank system WT151M or WT152M.
8-3/4"6"
1/2"
# SS-00622 v.01Printed in U.S.A. | © TOTO USA 08h/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
MODELS
• YT830#WH - Glass with white buttons
COLORS/FINISHES
• #WH - Glass with white buttons
SPECIFICATIONS
• Warranty 1-year limited warranty• Material Glass/ABS • Shipping Weight 1.3lb or Carton (10pcs.) 14lb.• Shipping Dimensions 9-1/4" x 6-1/2" x 1-1/2"
Carton (10pcs.)16" x 12" x 8"
YT820Convex Push Plate - Dual Button
FEATURES
• Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M)
• Push plate in brushed stainless steel or polished chrome is robust and vandal-proof. A hidden mounting screw protects against theft.
PRODUCT SPECIFICATION
Push plate shall be model # YT820#____ Push plate shall be either staineless steel or polished chrome with 2 actuators on the front. Push plate shall be mounted to in-wall tank system WT151M or WT152M.
# SS-00621 v.01Printed in U.S.A. | © TOTO USA 08h/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
MODELS
• YT820#SS - Brushed Stainless Steel• YT820#CP - Polished Chrome
COLORS/FINISHES
• #SS - Brushed Stainless Steel
• #CP - Polished Chrome
SPECIFICATIONS
• Warranty 1-year limited warranty• Material Metal/ABS • Shipping Weight 1.2lb or Carton (10pcs.) 13lb.• Shipping Dimensions 9-1/4" x 6-1/2" x 1-1/2"
Carton (10pcs.)16" x 12" x 8"
8-1/2"
5-5/8"
5/8"
YT800#WHRectangle Push Plate - Dual Button
FEATURES
• Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M)
PRODUCT SPECIFICATION
Push plate shall be model # YT800#WH. Push plate shall be solid plastic with 2 actuators on the front. Push plate shall be mounted to in-wall tank system WT151M or WT152M.
# SS-00620 v.01Printed in U.S.A. | © TOTO USA 08h/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
MODELS
• YT800#WH - White plastic
COLORS/FINISHES
• Standard #WH - White
SPECIFICATIONS
• Warranty 1-year limited warranty• Material ABS • Shipping Weight 0.6lb or Carton (10pcs.) 7lb.• Shipping Dimensions 9-1/4" x 6-1/2" x 1-1/2"
Carton (10pcs.)16" x 12" x 8"
8-1/2"5-3/4"
3/4"
SC134Commercial Seat
FEATURES
• Elongated closed front toilet seat and cover• Mounting hardware included
PRODUCT SPECIFICATION
Seat shall be model # SC134______ Seat shall be solid plastic with open front seat. Seat shall have integral bumpers. Hinges to be color matched with noncorrosive nylon stud and nut.
18-3/8”(467mm)
5-1/2”(140mm)
4”(102mm)
8-5/8”(219mm)14-1/2”
(368mm)
# SS-00341 v.03Printed in U.S.A. | © TOTO USA 07/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
MODELS
• SC134
COLORS/FINISHES
• #01 Cotton
SPECIFICATIONS
• Warranty 1-year limited warranty• Material Polypropylene • Shipping Weight 6 lbs.• Shipping Dimensions 18-1/2" x 14-1/2" x 3"
PLEASE NOTE:
Cannot be installed with the following models: MS874114S(G), MS884114, MS914114, MS904114, CST774S, CST804S, CST414M, CST416M, CST464MF,CST412MF, & CST412MF.10, CT418FG.
SC534Commercial Seat
FEATURES
• Elongated closed front toilet seat• Mounting hardware included
PRODUCT SPECIFICATION
Seat shall be model # SC534______ Seat shall be solid plastic with open front seat. Seat shall have integral bumpers. Hinges to be color matched with noncorrosive nylon stud and nut.
PLEASE NOTE:
Cannot be installed with the following models: MS874114S(G), MS884114, MS914114, MS904114, CST774S, CST804S, CST414M, CST416M, CST464MF,CST412MF, & CST412MF.10, CT418FG.
5-1/2”(140mm)
18-5/8”(473mm)
3-3/4”(95mm)
14-3/4”(375mm)
# SS-00340 v.03Printed in U.S.A. | © TOTO USA 07/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
MODELS
• SC534
COLORS/FINISHES
• #01 Cotton
SPECIFICATIONS
• Warranty 1-year limited warranty• Material Polypropylene • Shipping Weight 6 lbs.• Shipping Dimensions 18-1/2" x 14-1/2" x 3"
UE930Lloyd® Urinal
FEATURES
• Compact urinal with concealed integral trap• Washout fl ush action• Top spud inlet• Can be mounted at ADA compliant height
MODELS
• UE930#01Lloyd urinal and electronic fl ush valve
COMPONENTS
• UT930Lloyd urinal only
• TEY1DNC-42Lloyd electronic fl ush valve only,1.0GPF or less
PRODUCT SPECIFICATION
Urinal shall be made of vitreous china. The wall-mounted, ADA compliant, washout urinal shall be 1.0GPF or less when paired with TEY1DNC-42 fl ushometer valve. Urinal specifi ed shall be model UE930________.
COLORS/FINISHES
• Standard #01 Cotton
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative compliance: California AB715, California
Green Building Code• ADA compliant
SPECIFICATIONS
• Water Use 0.5GPF - 1.0LPF • Flush System Spreader nozzle• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (fl owing)• Height (Urinal Only) 29-1/4"• Width 16-1/2"• Rim 14"• Shipping Weight UE930 - 57.3lbs • Shipping Dimensions UE930 30-5/16" L x 15-1/8"
W x 17-3/4" H
UE930Lloyd® Urinal
5-1/8"(131mm)
42"(1068mm)
14" (356mm)
6" (152mm )
Outlet Detail
19-1/2"(495mm)
Outlet 2"(51mm)
I.P.S
4-3/4"(120mm) 24"
(610mm)
1" (25mm)
4-1/4" (108mm)2-1/2" (63mm)
37-3/4"(960mm)
11"(280mm)
6-1/2"(165mm)
*Suggested Dimensions
29-1/4"(744mm)
16-3/8"(415mm)
6"(150mm)
19-1/2"(495mm)
6" (152mm)
16-1/2" (420mm)
10-1/8" (258mm)
9-1/2" (246mm)
5/8" Spud(16mm)
# SS-00260 v.02Printed in U.S.A. | © TOTO USA 04/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
INSTALLATION NOTES
Recommended Carrier:Jay R. Smith 0636 (Wall Hanger)0637 (Wall Hanger with bottom)
UT447E(V)0.5GPF Low Consumption Washout Urinal
FEATURES
• Compact urinal with concealed integral trap• Washout fl ush action with 3/4" top or back spud
inlet• 0.5 GPF with any fl ush valve shown below
MODELS
• UT447EUrinal with 3/4" top spud inlet
• UT447EVUrinal with 3/4" back spud inlet
PRODUCT SPECIFICATION
The wall-mounted, ADA compliant, low consumption washout urinal shall be 0.5GPF/1.9LPF when paired with a 0.5GPF fl ushometer valve and 1.0GPF/3.8LPF when paired with 1.0GPF/3.8LPF fl ushometer valve. Urinal specifi ed shall be model UT447E___________.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative compliance: California AB715, California
Green Building Code• ADA compliant
• THU3017Stainless Steel Urinal Drain Cover
ADDITIONAL ITEMS (sold separately)
RECOMMENDED FLUSH VALVES
UT447E UT447EV
EcoPower® Manual EcoPower®
TEU1LN12#CP TMU1LN12#CP TEU2LN11#SS
TEU3LN11#SS
UT447E UT447EV
SPECIFICATIONS
• Water Use 0.5GPF/1.9LPF• Flush System Washout fl ush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (fl owing)• Height (Urinal Only) 27-3/16"• Width 18"• Rim 14"• Shipping Weight UT447E(V) - 60lbs • Shipping Dimensions UT447E(V) 29-7/8" L x 16-3/4"
W x 19-1/8" H
UT447E(V)0.5GPF Low Consumption Washout Urinal
17-1/8"(436mm)
2-1/2"(63.5mm)
Outlet2" (51mm)
I.P.S.
Outlet Detail
WallBrackets
WallBrackets
6" (152mm)
17"*(432mm)
12-1/4"*(311mm)
6"(152mm)
3/4"(19mm)Spud
3/4" (19mm)I.P.S. Supply
16-11/16"(424mm)
18"(457mm) 27"
(685mm)
11-1/2"(292mm)
17-1/2"(444mm)
Finished Floor Line
*For ADA installation refer to local codes
9-1/4"(235mm)
14" (356mm)
12" (305mm)
4-3/4"(121mm)
3/4"(19mm)Spud
Outlet2" (51mm)
I.P.S.
Outlet Detail
*For ADA installation refer to local codes
2-1/
2"(6
3.5m
m)
WallBrackets
WallBrackets
17"*(432mm)
6" (152mm)
9-1/4"(235mm)
14" (356mm)12-1/4"*(311mm)
6"(152mm)
16-11/16"(424mm)
18"(457mm) 27"
(685mm)
17-1/8"(436mm)
12" (305mm)
17-1/2"(444mm)
Finished Floor Line
# SS-00256 v.04Printed in U.S.A. | © TOTO USA 08/10 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
UT447E UT447EV
UT104E(V)0.5GPF Low Consumption Washout Urinal
FEATURES
• 0.5GPF• Compact urinal with concealed integral trap• Washout fl ush action with 3/4" top or back spud
inlet
MODELS
• UT104EUrinal with 3/4" top spud inlet
• UT104EVUrinal with 3/4" back spud inlet
PRODUCT SPECIFICATION
The wall-mounted, ADA compliant, low consumption washout urinal shall be 0.5GPF/1.9LPF when paired with a 0.5GPF fl ushometer valve and 1.0GPF/3.8LPF when paired with 1.0GPF/3.8LPF fl ushometer valve. Urinal specifi ed shall be model UT104E________.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others• Legislative compliance: California AB715, California
Green Building Code• ADA compliant
• THU3010Stainless Steel Urinal Drain Cover
ADDITIONAL ITEMS (sold separately)
RECOMMENDED FLUSH VALVES
UT104E UT104EV
EcoPower® Manual EcoPower®
TEU1LN12#CP TMU1LN12#CP TEU2LN11#SS
TEU3LN11#SS UT104E UT104EV
SPECIFICATIONS
• Water Use 0.5GPF/1.9LPF• Flush System Washout fl ush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (fl owing)• Height (Urinal Only) 21-3/4"• Width 13"• Rim 14"• Shipping Weight UT104E(V) - 34.5lbs • Shipping Dimensions UT104E(V) 24" L x 13-3/4" W x 15-1/8" H
UT104E(V)0.5GPF Low Consumption Washout Urinal
14"(356mm)2-1/2"
(61mm)
3/4"(19mm)Spud
12-3/8"(315mm)
10-3/4"(273mm)
17"(432mm)
2"(51mm)
I.P.Inside
Threads4-1/4"
(108mm)
12-1/2"(318mm)
4-1/4"(108mm)
3/4" (19mm) I.P.S. Supply forFlushometer Valve
4-3/4"(121mm)
13"(330mm)9-7/8"
(250mm)
21-3/4"(552mm)
11-1/2"(292mm)
14"(356mm)
1-1/2"(40mm)
3/4" (19mm)Spud
2"(51mm)
I.P.Inside
Threads 4-1/4"(108mm)
17"(432mm)
12-1/2"(318mm)
4-1/4"(108mm)
10-3/4"(273mm)
12-3/8"(315mm)
21-3/4"(552mm)
13"(330mm)9-7/8"
(250mm)
# SS-00258 v.02Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
UT104E UT104EV
FEATURES
• 19" diameter• Vitreous china• ADA compliant• Concealed front overfl ow• Complete with installation template and sealing
compound
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
MODELS
• LT502 Lavatory only with single hole faucet center
• LT502.4 Lavatory only with 4" faucet centers
• LT502.8 Lavatory only with 8" faucet centers
LT502Self-Rimming Lavatory
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 19" in diameter. Product shall be with front overfl ow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT502_________.
#SS-00228 v.03Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT502Self-Rimming Lavatory
SPECIFICATIONS
• Waste 1-1/4" O.D.• Size 19" diameter• Basin 14-7/8"W x 12-12"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 21 lbs.• Shipping Dimensions 20-1/2"L x 20-1/2"W x 10-3/8"H
These dimensions and specifi cations are subject to change without notice
8"(203mm)
2-3/4"(70mm)
3-3/8"(84mm)
7-1/8"(180mm)
12-1/2"(317mm)
19" (483mm)
14-7/8" (380mm)
8-1/2"(215mm)
*13"(330mm)
*31"(787mm)
1-1/8" (28mm)
*8" (203mm)
*14"(355mm)
19"(483mm)
SUPPLIES
1-1/4" O.D. WASTE
*Suggested Dimension
8"(203mm)
9"(229mm)
27"(686mm)
17"(432mm)
34"(864mm)
18"(457mm)
6"(152mm)
ADA Compliance Check
FEATURES
• 20" x 17"• Vitreous china• ADA compliant• Concealed front overfl ow• Complete with installation template and sealing
compound
MODELS
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
• LT501 Lavatory only with single hole faucet center
• LT501.4 Lavatory only with 4" faucet centers
• LT501.8 Lavatory only with 8" faucet centers
LT501Self-Rimming Lavatory
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 20" x 17". Product shall be with front overfl ow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT501_________.
# SS-00329 v.04Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT501Self-Rimming Lavatory
SPECIFICATIONS
• Waste 1-1/4" O.D.• Size 20"W x 17"D• Basin 15-1/4"W x 11-1/8"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 20 lbs.• Shipping Dimensions 21-5/8"L x 19-1/8"W x 10-3/8"H
These dimensions and specifi cations are subject to change without notice
8"(203mm)
2-1/8"(53mm)
2-5/8"(67mm)
6-5/8"(168mm)
17"(432mm)
20" (508mm)
14-5/8" (372mm)
11-1/8"(283mm)
*14"(355mm)
8-1/4"(210mm)
*13"(330mm)
*31"(787mm)
*8" (203mm)
1" (25mm)
center faucet hole: 1-1/4" / 31mm4" and 8" faucet hole: 1-3/8" / 35mm
SUPPLIES
1-1/4" O.D. WASTE
*Suggested Dimension
8"(203mm)
9"(229mm)
27"(686mm)
17"(432mm)
34"(864mm)
18"(457mm)
6"(152mm)
ADA Compliance Check
FEATURES
• 19-1/2" diameter• Vitreous china• ADA compliant• Concealed front overfl ow• Complete with installation template and sealing
compound
COLORS/FINISHES
• Standard #01 Cotton
MODELS
• LT402#01 Lavatory only with single hole faucet center
• LT402.4#01 Lavatory only with 4" faucet centers
• LT402.8#01 Lavatory only with 8" faucet centers
LT402Self-Rimming Lavatory
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 19-1/2" in diameter. Product shall be with front overfl ow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT402_________.
# SS-00330 v.04Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT402Self-Rimming Lavatory
SPECIFICATIONS
• Waste 1-1/4" O.D.• Size 19-1/2"diameter• Basin 14-1/4"W x 14"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 20-1/2 lbs.• Shipping Dimensions 19-5/8"L x 19-5/8"W x 9-1/2"H
These dimensions and specifi cations are subject to change without notice
8-1/4"(210mm) *13"
(330mm) *14"(356mm)
*31" (787mm)
4" (102mm)
8" (203mm)
1/2" (13mm)
*Suggested dimension
2-1/2" (64mm)
7-1/4"(184mm)
14-1/4"(362mm)
14" (356mm)
19-1/2" (495mm)
19-1/2"(495mm)
1-1/4" O.D. Waste
Supplies
8"(203mm)
9"(229mm)
27"(686mm)
17"(432mm)
34"(864mm)
18"(457mm)
6"(152mm)
ADA Compliance Check
FEATURES
• 17-3/4" x 20-3/4"• Vitreous china• ADA compliant• Concealed front overfl ow• Complete with installation template and sealing
compound
MODELS
• LT401 Lavatory only, with single hole faucet center
• LT401.4 Lavatory only with 4" faucet centers
• LT401.8 Lavatory only with 8" faucet centers
LT401Self-Rimming Lavatory
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 20-3/4" x 17-3/4". Product shall be with front overfl ow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT501_________.
#SS-00331 v.03Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT401Self-Rimming Lavatory
SPECIFICATIONS
• Waste 1-1/4" O.D.• Size 20-3/8"W x 17-3/4"D• Basin 15-1/2"W x 11"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight LT401/LT401.4/LT401.8 21-1/2 lbs.• Shipping Dimensions LT401/LT401.4/LT401.8 21-1/4"L x 18-1/4"W x 9-1/2"H
These dimensions and specifi cations are subject to change without notice
8-1/4"(210mm) *13"
(330mm)*14"(356mm)
*34"(864mm)
4" (102mm)
8" (203mm)
1/2" (13mm)
*Suggested dimension
2" (51mm)
6-3/4"(172mm)
11-1/4"(286mm)
20-3/8" (518mm)
17-3/4"(450mm)
1-1/4" O.D. Waste
Supplies
15-1/2" (394mm)
8"(203mm)
9"(229mm)
27"(686mm)
17"(432mm)
34"(864mm)
18"(457mm)
6"(152mm)
ADA Compliance Check
FEATURES
COLORS/FINISHES
LT587Undercounter Lavatory
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
#SS-00332 v.03Printed in U.S.A. | © TOTO LTD. 07/10 | Printed on recycled paper !
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT587Undercounter Lavatory
SPECIFICATIONS INSTALLATION NOTES
These dimensions and specifications are subject to change without notice
*5-1/8" (131mm)*2-1/2" (63mm)
2-5/8"(68mm)
1-1/8" (28mm) 1-1/8" (28mm)
1-1/8" (28mm)
19" (483mm)
15"(381mm)
1-1/8"(28mm)
*13-1/8"(333mm)
*12"(305mm)
*8" (203mm)
*Suggested Dimension
7-1/2"(191mm)
1/2" (12mm)
14"(355mm)
18" (457mm)
17” (432mm)
9” (229mm)
6” (152mm)
34” (864mm)
24” (610mm)
1-1/2” (37mm)
1/4” (50mm)
17-1/4” (437mm)
27” (686mm)
FEATURES
• 17" x 14"• Vitreous china• ADA compliant• Concealed front overfl ow• Mounting assembly complete with installation
template, mounting screw set and sealing compound
LT569Undercounter Lavatory
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
MODELS
• LT569 (#01, #03, #12)
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• Meets ADA guidelines and ANSI A117.1
requirements when countertop is installed 864mm (34") from fi nished fl oor and lavatory is installed 205mm (8-1/8") minimum from front edge.
PRODUCT SPECIFICATION
The undercounter lavatory shall be made of vitreous china. Lavatory shall be 17"in length and 11" in width. Product shall be with overfl ow and lavatory shall include mounting assembly. Lavatory shall be ADA compliant. Lavatory shall be TOTO Model LT569______.
# SS-00333 v.03Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT569Undercounter Lavatory
SPECIFICATIONS INSTALLATION NOTES
• Waste 1-1/4" O.D.• Size 19-1/4"W x 16-1/4"D• Basin 17"W x 14"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 17.4 lbs.• Shipping Dimensions 22"W x 8-1/2"H x 18-1/2"L
These dimensions and specifi cations are subject to change without notice
1-1/8" (28mm)
14"(355mm)
1-1/8" (28mm)
1-1/8" (28mm) 1-1/8" (28mm)17" (432mm)
2-1/2" (63mm)
2-5/8"(68mm)
5-1/8"(131mm)
*13-1/8"(333mm)
*12"(305mm)
*8" (203mm)
1/2" (12mm)
7-1/2"(191mm)
16" (406mm)
13"(329mm)
*Suggested Dimension
8"(203mm)
9"(229mm)
27"(686mm)
17"(432mm)
34"(864mm)
18"(457mm)
6"(152mm)
ADA Compliance Check
FEATURES
• 20-1/2" x 27"• Vitreous china• ADA compliant• Punching for concealed arm carrier• No hardware included
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
MODELS
• LT308 Lavatory only, with single hole
• LT308.4 Lavatory only with 4" faucet centers
• LT308.11 Lavatory only with 11" faucet centers
• LT308A Lavatory only with single hole. Right side soap hole
• LT308.4A Lavatory only with 4" faucet centers. Right side
soap hole
• LT308.11A Lavatory only with 11" faucet centers. Right side
soap hole.
LT308Wheelchair Users Lavatory
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The wall-mount lavatory shall be made of vitreous china. Lavatory shall be 20-1/2"in length and 27" in width. Product shall be with front overfl ow and lavatory shall include mounting assembly. Lavatory shall be ADA compliant. Lavatory shall be TOTO Model LT308______.
#SS-00335 v.04Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT308Wheelchair Users Lavatory
SPECIFICATIONS INSTALLATION NOTES
• Waste 1-1/4" O.D.• Size 20-1/2"W x 27"D• Basin 15-1/8"W x 14-3/4"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight LT308/LT308.4/LT308.11 56 lbs.• Shipping Dimensions LT308/LT308.4/LT308.11 29-1/8"L x 22-7/8"W x 10-5/8"H
TOTO recommends the use of Jay R. Smith 0700 (- 27 - M31) (Concealed Arms) or equal.
These dimensions and specifi cations are subject to change without notice
SUPPLIES
1-1/4" O.D. WASTE
*10-3/4"(272mm)
8-1/8"(205mm)
15-1/8"(384mm)
27"(687mm)
4"(102mm)
*8" (203mm)
*32"-34"(813-864mm)
20-1/2" (520mm)
16-1/8" (410mm)
17-3/8" (440mm)
14-3/4"(375mm)
7-1/8"(182mm)
6-7/8"(174mm)
6-3/8"(161mm)
ø3/8"(ø11mm)
2-3/4"(70mm)
ø2-5/32"(ø55mm)
3-3/8"(85mm)
8-1/4"(209mm)
FEATURES
• 21" x 18-1/4" lavatory with back splash• Vitreous china• ADA compliant• Punching for concealed arm carrier• Includes wall hanger• Punching for concealed arm carriers• Soap dispenser hole
LT307(A)Commercial Wall-Hung Lavatory
PRODUCT SPECIFICATION
The lavatory shall be 21" width and 18-1/4" depth. The basin shall be 14-15/16" width by 10-3/8" depth. The lavatory shall be made of vitreous china and can be installed at ADA height with rear overfl ow. TOTO model number LT307A#01 shall be drilled for soap dispenser. Lavatory shall be TOTO model LT307_______.
COLORS/FINISHES
• Standard #01 Cotton #03 Bone #12 Sedona Beige
MODELS
• LT307 Lavatory only, with single hole
• LT307.4 Lavatory only with 4" faucet centers
• LT307.8 Lavatory only with 8" faucet centers
• LT307A#01 (Cotton only) Lavatory only with single hole. Side soap hole
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifi cations: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
# SS-00336 v.04Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
LT307(A)Commercial Wall-Hung Lavatory
SPECIFICATIONS INSTALLATION NOTES
• Waste 1-1/4" O.D.• Size 21"W x 18-1/4"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 40 lbs.• Shipping Dimensions 22-5/8"L x 19-1/8"W x 13-3/4"H
TOTO recommends the use of Jay R. Smith 0700 (Concealed Arms) with 19" arms 0800 (Wall Support Plate).
These dimensions and specifi cations are subject to change without notice
1 1/4" WASTE OUTLET
SUPPLIES
* SUGGESTED DIMENSION
*10-3/4! (273mm) *8-3/4!
(222mm)
33-11/16! (856mm)
19-1/2! (496mm)
10-3/8! (264mm)
3-15/16! (100mm)
18-1/4! (464mm)
21! (533mm)
14-15/16! (380mm)
17-1/2! (191mm)
1-3/4! (44mm)
3-3/8! (86mm)
8! (203mm)
9-5/58" (244mm)
7-1/8" (181mm)
4-1/2" (114mm)
6-5/16" (160mm)
10-1/2" (267mm)
Non-Hold Open High-Effi ciency Urinal Flushometer Valve - 0.5 gpf
FEATURES
• Manual operated, non-hold open, urinal fl ushometer valve complete with 3/4” angle stop and 3/4” or 1-1/4" vacuum breaker set
• Piston valve action with 0.5 gpf• Left/right rough-in
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TMU1LN#CP Valve only, Right/Left hand rough
• TMU1LN12#CP (3/4" Vacuum breaker) Right/Left hand rough• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-12 • 3/4” Angle stop – 10077t4 • 3/4” Vacuum breaker – 10075t2 • Spud nut & escutcheon – 71051Nt5 • Sweat solder kit – TH559EDVSJ1
• TMU1LN22#CP (1-1/4" Vacuum breaker) Right/Left hand rough• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-22 • 3/4” Angle stop – 10077t4 • 1-1/4” Vacuum breaker – 10075t5 • Spud nut & escutcheon – 71051Nt7 • Sweat solder kit – TH559EDVSJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
TOTO® Model No. _____________________________Manual type urinal fl ushometer valve, non-hold-open piston type with, self-cleaning debris screen and precise fl ushing capability. Low consumption water of 0.5 gpf/1.9 lpf model. Accessories to include angle stop with check valve, vacuum breaker. Sweat solder kit, spud nut and escutcheon.
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TMU1LN Series
*Adjustable to + 1/2” from standard
4-3/4”*
1-1/2” NPSM
11-1/2”
3/4” Inlet supply
MINIMUM2-1/4”
_
TMU1LN SeriesNon-Hold Open Urinal Flushometer Valve - 0.5 gpf
#SS-00097, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 3/4" NPT• Fixture type Low consumption urinal 0.5 gpf / 1.9 lpf fl ushometer type• Supply water pressure 15 psi - 100 psi*
Non-Hold Open Urinal Flushometer Valve - 1.0 gpf
FEATURES
• Manual operated, non-hold open, urinal fl ushometer valve complete with 3/4” angle stop and 3/4” or 1-1/4"vacuum breaker set
• Piston valve action with 1.0 gpf• Left/right rough-in
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TMU1NNC Valve only, Right/Left Hand Rough
• TMU1NNC-12 (3/4" Vacuum breaker) Right/Left Hand Rough• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-12 • 3/4” Angle stop – 10077t4 • 3/4” Vacuum breaker – 10075t2 • Spud nut & escutcheon – 71051Nt5 • Sweat solder kit – TH559EDVSJ1
• TMU1NNC-22 (1-1/4" Vacuum breaker) Right/Left Hand Rough• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-22 • 3/4” Angle stop – 10077t4 • 1-1/4” Vacuum breaker – 10075t5 • Spud nut & escutcheon – 71051Nt7 • Sweat solder kit – TH559EDVSJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
TOTO® Model No. _____________________________Manual type urinal fl ushometer valve, non-hold-open piston type with, self-cleaning debris screen and precise fl ushing capability. Low consumption 1.0 lpf/3.8 lpf model. Accessories to include angle stop with check valve, vacuum breaker. Sweat solder kit, spud nut and escutcheon.
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TMU1NNC Series
11-1/2”
4-3/4”*
MINIMUM2-1/4”
*Adjustable to 1/2” from standard
1-1/2” NPSM
3/4” Inlet supply
TMU1NNC Series
Non-Hold Open Urinal Flushometer Valve - 1.0 gpf
#SS-00324, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 3/4" NPT• Fixture type Low consumption urinal 1.0 gpf / 3.8 lpf fl ushometer type• Supply water pressure 15 psi - 100 psi*
High-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 3/4” angle stop and 1-1/4” or 3/4" vacuum breaker set
• 0.5 gpf or less• Manual override button• 12 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEU1LN#CP Valve only, Left and right rough, Polished Chrome fi nish
• TEU1LN12#CP (3/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 • 3/4" Angle stop - 10077t4 • 3/4" Vacuum breaker - 10075t2 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1
• TEU1LN22#CP (1-1/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-22 • 3/4" Angle stop - 10077t4 • 1-1/4" Vacuum breaker - 10075t5 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 0.5 gallon per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’sEcoPower® Flush Valves, using the valve 30 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TEU1LN Series
*Check local codes
L
Max 19-11/16"(Max 500mm)
Max 31-1/2"(Max 800mm)
15
4-3/4 1/2"(120 13mm)
3/4"inlet supply
11-1/2"(292mm)1-1/2"
NPSM
Min.2-1/4"(57mm)
3/4"NPT
TEU1LN SeriesHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
#SS-00056, v.04Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 0.5 gpf / 2.4 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twelve (12) hours of non-use
TEU1GNC SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 3/4” angle stop and 1-1/4” or 3/4" vacuum breaker set
• 1.0 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEU1GNC Valve only, Left and right rough, Polished Chrome fi nish
• TEU1GNC-12 (3/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 • 3/4" Angle stop - 10077t4 • 3/4" Vacuum breaker - 10075t2 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1
• TEU1GNC-22 (1-1/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-22 • 3/4" Angle stop - 10077t4 • 1-1/4" Vacuum breaker - 10075t5 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.0 gallon per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’sEcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
*Check local codes
L
Max 19-11/16"(Max 500mm)
Max 31-1/2"(Max 800mm)
15
4-3/4 1/2"(120 13mm)
3/4"inlet supply
11-1/2"(292mm)1-1/2"
NPSM
Min.2-1/4"(57mm)
3/4"NPT
TEU1GNC SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf
# SS-00057, v.01Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.0 gpf / 3.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
NOTES
TOTO’s 1.0 gpf EcoPower fl ush valves use “Fuzzy Logic” technology to offer further water conserva-tion. The fl ush valve’s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per fl ush. In facilities with frequent use, the fl ush valve issues less water per fl ush with a full fl ush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full fl ush every time.
High-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set• 0.5 gpf or less• Back spud - concealed 4" x 4" Cover plate• 12 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TEU3LN#SS Valve only, Surface mount, Satin fi nish
• TEU3LN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1
• TEU3LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 0.5 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twelve hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. manual overide button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 30 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TEU3LN Series
TOTOEcoPower®
OVE
RRID
E BU
TTO
NLO
CATI
ON
LOCA
TIO
NSE
NSO
R
13-1/2"
Urinal
Frame
SupplySupply2-3/8”
3-3/4”
13-1/2”
Urinal
3-3/4”
13-1/2”
Back Spud 1-1/4” Back Spud 3/4”
Solder joint
Finished wall2-3/8”
Finished wall
Back spud (ø1-5/16”)*+/- 1/2”
Dimensions: Inch
Top of the Urinal
Location of the Left watersupply pipe 3/4” NPT
Location of the Right water supply
pipe 3/4” NPT
4-3/4”
3-15/16”
3-15/16”
4-3/4”* 4-3/4”*
Opening in Wall:3-15/16” x 3-15/16”
4-3/4”
3-3/
8”
1-3/
4”
of Supplyand sensor
(distance from Spud Hole to bothof Supply and Sensor)
TEU3LN SeriesHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
#SS-00096, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 0.5 gpf / 2.4 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twelve (12) hours of non-use
INSTALLATION NOTES
The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintainence.
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness.
DIAGRAM RECOMMENDED INSTALLATION
EcoPower® Urinal Flushometer Valve, 1.0 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set• 1.0 gpf or less• Back spud - concealed 4" x 4" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TEU3GN#SS Vavle only, Surface mount, Satin fi nish
• TEU3GN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1
• TEU3GN21#SS (1-1/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 1.0 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TEU3GN Series
TOTOEcoPower®
OVE
RRID
E BU
TTO
NLO
CATI
ON
LOCA
TIO
NSE
NSO
R
13-1/2"
Urinal
Frame
SupplySupply2-3/8”
3-3/4”
13-1/2”
Urinal
3-3/4”
13-1/2”
Back Spud 1-1/4” Back Spud 3/4”
Solder joint
Finished wall2-3/8”
Finished wall
Back spud (ø1-5/16”)*+/- 1/2”
Dimensions: Inch
Top of the Urinal
Location of the Left watersupply pipe 3/4” NPT
Location of the Right water supply
pipe 3/4” NPT
4-3/4”
3-15/16”
3-15/16”
4-3/4”* 4-3/4”*
Opening in Wall:3-15/16” x 3-15/16”
4-3/4”
3-3/
8”
1-3/
4”
of Supplyand sensor
(distance from Spud Hole to bothof Supply and Sensor)
TEU3GN SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf
#SS-00095, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.0 gpf / 3.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
INSTALLATION NOTES
The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintainence.
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness.
DIAGRAM RECOMMENDED INSTALLATION
NOTES
TOTO’s 1.0 gpf EcoPower fl ush valves use “Fuzzy Logic” technology to offer further water conserva-tion. The fl ush valve’s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per fl ush. In facilities with frequent use, the fl ush valve issues less water per fl ush with a full fl ush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full fl ush every time.
High-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set• 0.5 gpf or less• Back spud - concealed 14"x 12" Cover plate• 12 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TEU2LN#SS Vavle only, Surface mount, Satin fi nish
• TEU2LN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1
• TEU2LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty 14"x12" stainless steel coverplate with satin fi nish. Vandal resistant hex head screws. Lower water consumption of 0.5 gallon per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve with stainless steel self cleaning debris screen and solenoid with self cleaning mechanism. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breaker included with accessories. Electrical sensor separated from valve and sealed in waterproof compartment. Through the use of TOTO's EcoPower® Flush Valves, using the valve 30 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TEU2LN Series
Dimensions: Inch
Urinal Urinal
Finished wall
Supply Supply
13-1/2”
2-3/8” 2-3/8”
3-3/4”3-3/4”
13-1/2”
Back Spud 1-1/4” Back Spud 3/4”
Solder joint
Finished wall
OVE
RR
IDE
BUTT
ON
LOC
ATIO
NSE
NSO
RLO
CAT
ION
Back spud (ø1-5/16”)
13-1/2”
4-3/4”*
Opening in wall
of Supplyand sensor
(distance from Spud Hole to bothof Supply and Sensor)
Ope
ning
in w
all
Top of the Urinal
11-1
5/16
”
5-1/
8”
3-13
/16”
*+/- 1/2”
13-1/2”
TEU2LN SeriesHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf
#SS-00094, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 0.5 gpf / 2.4 lpf• Urinal type Low consumption wash down
and jetted fl ush design urinals• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twelve (12) hours of non-use
INSTALLATION NOTES
The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall.
DIAGRAM RECOMMENDED INSTALLATION
EcoPower® Urinal Flushometer Valve, 1.0 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set• 1.0 gpf or less• Back spud - concealed 14"x 12" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TEU2GN#SS Valve only, Surface mount, Satin fi nish
• TEU2GN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1
• TEU2GN21#SS (1-1/4" Vacuum Breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty 14"x12" stainless steel coverplate with satin fi nish. Vandal resistant hex head screws. Low water consumption of 1.0 gallons per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve with stainless steel self-cleaning debris screen and solenoid with self cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Electrical sensor separated from valve and sealed in waterproof compartment. Through the use of TOTO's EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TEU2GN Series
Dimensions: Inch
Urinal Urinal
Finished wall
Supply Supply
13-1/2”
2-3/8” 2-3/8”
3-3/4”3-3/4”
13-1/2”
Back Spud 1-1/4” Back Spud 3/4”
Solder joint
Finished wall
OVE
RR
IDE
BUTT
ON
LOC
ATIO
NSE
NSO
RLO
CAT
ION
Back spud (ø1-5/16”)
13-1/2”
4-3/4”*
Opening in wall
of Supplyand sensor
(distance from Spud Hole to bothof Supply and Sensor)
Ope
ning
in w
all
Top of the Urinal
11-1
5/16
”
5-1/
8”
3-13
/16”
*+/- 1/2”
13-1/2”
TEU2GN SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf
#SS-00093, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.0 gpf / 3.8 lpf• Urinal type Low consumption wash down
and jetted fl ush design urinals• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
INSTALLATION NOTES
The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall.
DIAGRAM RECOMMENDED INSTALLATION
NOTES
TOTO’s 1.0 gpf EcoPower fl ush valves use “Fuzzy Logic” technology to offer further water conserva-tion. The fl ush valve’s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per fl ush. In facilities with frequent use, the fl ush valve issues less water per fl ush with a full fl ush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full fl ush every time.
TMT1LN SeriesNon-Hold Open High-Effi ciency Toilet Flushometer Valve - 1.28 gpf
FEATURES
• Manual operated, non-hold open, toilet fl ushometer valve complete with 1” angle stop and 1-1/2” vacuum breaker set
• Piston valve action with 1.28 gpf• Left/right rough-in
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TMT1LN#CP Valve only, Right/Left hand rough
• TMT1LN32#CP (1-1/2" Vacuum breaker) Right/Left hand rough Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube
TOTO® Model No. _____________________________Manual toilet fl ushometer valve, non-hold-open piston type with self-cleaning debris screen and precise fl ushing capability. Low water consumption of 1.28 gpf / 4.8 lpf Polished Chrome exterior, angle stop with back-check and vacuum breaker included.
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
4-3/4”*1-1/2” NPSM
11-1/2”
1” Inlet supply
*Adjustable to + 1/2” from standard
TMT1LN32#CP1 in. NPT inlet and 1-1/2 in. outlet
MINIMUM2-1/4”
TMT1LN SeriesNon-Hold Open High-Effi ciency Toilet Flushometer Valve - 1.28 gpf
#SS-00098, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 1" NPT• Fixture type Flushometer valve bowl 1.28 gpf / 4.8 lpf• Supply water pressure 35 psi (fl owing) - 100 psi* (minimum fl ow rate of 23 gpm)
TMT1NNC SeriesNon-Hold Open Toilet Flushometer Valve - 1.6 gpf
FEATURES
• Manual operated, non-hold open, toilet fl ushometer valve complete with 1” angle stop and 1-1/2” vacuum breaker set
• Piston valve action with 1.6 gpf• Left/right rough-in
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TMT1NNC Valve only, Right/Left hand rough
• TMT1NNC-32 (1-1/2" Vacuum breaker) Right/Left hand rough• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube
TOTO® Model No. _____________________________Manual toilet fl ushometer valve, non-hold-open piston type with self-cleaning debris screen and precise fl ushing capability. Low consumption 1.6 gpf models available. Polished Chrome exterior, angle stop with back-check and vacuum breaker included.
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
11-1/2”
1” Inlet supply
1-1/2” NPSM4-3/4”*
MINIMUM2-1/4”
*Adjustable to 1/2” from standard
TMT1NNC SeriesNon-Hold Open Toilet Flushometer Valve - 1.6 gpf
#SS-00036, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 1" NPT• Fixture type Flushometer valve bowl 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 100 psi*
TET1LN SeriesHigh-Effi ciency Toilet EcoPower®
Flushometer Valve, 1.28 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum breaker set
• 1.28 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION• #CP Polished Chrome
• TET1LN#CP Valve only, Left and right rough, Polished Chrome fi nish
• TET1LN32#CP (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, toilet fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.28 gallons per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’sEcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
4-3/4" 1/2"(120 13mm)
Min.2-1/4"(57mm)
1"NPT
11-1/2"(292mm)
**Check local codes
L
Max19-11/16"(Max 500 mm)
Max31-1/2"(Max 800 mm)
15
TET1LN SeriesHigh-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpf
#SS-00086, v.04Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.28 gpf / 4.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 35 psi (fl owing) - 125 psi* (minimum fl ow rate of 23 gpm)• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
INSTALLATION NOTES
*Alternate ADA InstallationMount grab bar at the 36” (914mm) maximum allowed height or use the split grab bars.
TET1GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum breaker set
• 1.6 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION• #CP Polished Chrome
• TET1GNC Valve only, Left and right rough, Polished Chrome fi nish
• TET1GNC-32 (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, toilet fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.6 gallons per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’s®
EcoPower Flush Valves™, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
4-3/4" 1/2"(120 13mm)
Min.2-1/4"(57mm)
1"NPT
11-1/2"(292mm)
**Check local codes
L
Max19-11/16"(Max 500 mm)
Max31-1/2"(Max 800 mm)
15
TET1GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
# SS-00085, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating
system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
INSTALLATION NOTES
*Alternate ADA InstallationMount grab bar at the 36” (914mm) maximum allowed height or use the split grab bars.
TET6LN SeriesHigh-Effi ciency Toilet EcoPower®
Flushometer Valve, 1.28 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum breaker set
• For use with 24" vacuum breakers• 1.28 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION• #CP Polished Chrome
• TET6LN#CP Valve only, Left and right rough, Polished Chrome fi nish
• TET6LN32#CP (1-1/2" Vacuum Breaker) Left and right rough, Polished Chrome fi nish Complete set supplied with: Vacuum breaker & angle stop set - VBXCP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker 24" long - 10075t1L • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, toilet fl ush valve designed for use with 24" vacuum breakers. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.28 gallons per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
4-3/4" 1/2"(120 13mm)
Min.2-1/4"(57mm) 1"NPT
inlet supply
27"(686mm)
*Check local codes
1-1/2"NPSM
L
Max21-1/4"(Max 550 mm)
Max33-1/2"(Max 850 mm)
20º
TET6LN SeriesHigh-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpf
#SS-00088, v.01Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.28 gpf / 4.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 35 psi (fl owing) - 125 psi* (minimum fl ow rate of 23 gpm)• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
INSTALLATION NOTES
Alternate ADA Installation:Use split grab bars.
TET6GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES
• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum breaker set
• For use with 24" vacuum breakers• 1.6 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TET6GNC Valve only, Left and right rough, Polished Chrome fi nish
• TET6GNC-32 (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome fi nish Complete set supplied with: Vacuum breaker & angle stop set - VBXCP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker, 24" long - 10075T1L • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, toilet fl ush valve designed for use with 24" vacuum breakers. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.6 gallons per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
4-3/4" 1/2"(120 13mm)
Min.2-1/4"(57mm) 1"NPT
inlet supply
27"(686mm)
*Check local codes
1-1/2"NPSM
L
Max21-1/4"(Max 550 mm)
Max33-1/2"(Max 850 mm)
20º
TET6GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
#SS-00087, v.01Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty-four (24) hours of non-use
INSTALLATION NOTES
Alternate ADA Installation:Use split grab bars.
High-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpfFEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set• 1.28 gpf or less• Back spud fl oor, top spud and back spud wall
models - concealed 4" x 4" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TET3LN#SS Valve only, Surface mount, Satin fi nish
• TET3LN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3
• TET3LN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3
• TET3LN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 1.28 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO’s EcoPower®
Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TET3LN Series
x xx
TOTOEcoPower®SupplySupplySupply
16”16”11”
ofsensor
ofsensor
ofsensor
5”3”
frame
(3-3/4"- 4-7/8") *
2-1/4” Min.
6 - 7-1/8”
2-3/8” 2-3/8” 2-3/8”
(3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") *
ElbowNut
Dimensions: Inch
OVE
RR
IDE
BUTT
ON
LOC
ATIO
N
LOC
ATIO
NSE
NSO
R
Opening in Wall: Top SpudFinished wall Finished wall Finished wall
Bowl
BowlBowl
Back Spud Floor Mount Back Spud Wall Mount
4-3/4”
4-3/4”*
4-3/4”*
3-15/16” x 3-15/16”
3-3/
8”
1-3/
4”
of frameand fixture
Supply
* +/- 1/2”
TET3LN SeriesHigh-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpf
#SS-00092, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.28 gpf / 4.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 35 psi (fl owing) - 125 psi* (minimum fl ow rate of 23 gpm)• Trap seal protection Automatically fl ushes once
after twenty four (24) hours of non-use
INSTALLATION NOTES
The recommended installation for the toilet fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintainence.
Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).Contact TOTO for different thickness.
DIAGRAM RECOMMENDED INSTALLATION
Always position the sensor above upright toilet seats and grab barsX= At least 5” clearance from sensor to tip of toilet seat upposition or to top of grab bar is required to avoid false detection.
Depending on X, the frame may not be centered to Supply C as shown.*Leave some room for elbow nut from the wall for future maintenance.
L
TET3LN-31#SSTET3LN-32#SS TET3LN-33#SS
EcoPower® Toilet Flushometer Valve, 1.6 gpfFEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set• 1.6 gpf or less• Back spud fl oor, top spud and back spud wall
models - concealed 4" x 4" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TET3GN#SS Valve only, Surface mount, Satin fi nish
• TET3GN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3
• TET3GN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3
• TET3GN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 1.6 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TET3GN Series
x xx
TOTOEcoPower®SupplySupplySupply
16”16”11”
ofsensor
ofsensor
ofsensor
5”3”
frame
(3-3/4"- 4-7/8") *
2-1/4” Min.
6 - 7-1/8”
2-3/8” 2-3/8” 2-3/8”
(3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") *
ElbowNut
Dimensions: Inch
OVE
RR
IDE
BUTT
ON
LOC
ATIO
N
LOC
ATIO
NSE
NSO
R
Opening in Wall: Top SpudFinished wall Finished wall Finished wall
Bowl
BowlBowl
Back Spud Floor Mount Back Spud Wall Mount
4-3/4”
4-3/4”*
4-3/4”*
3-15/16” x 3-15/16”
3-3/
8”
1-3/
4”
of frameand fixture
Supply
* +/- 1/2”
TET3GN SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
#SS-00091, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty four (24) hours of non-use
INSTALLATION NOTES
The recommended installation for the toilet fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintainence.
Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).Contact TOTO for different thickness.
DIAGRAM RECOMMENDED INSTALLATION
Always position the sensor above upright toilet seats and grab barsX= At least 5” clearance from sensor to tip of toilet seat upposition or to top of grab bar is required to avoid false detection.
Depending on X, the frame may not be centered to Supply C as shown.*Leave some room for elbow nut from the wall for future maintenance.
L
TET3GN-31#SSTET3GN-32#SS TET3GN-33#SS
High-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpfFEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1"
angle stop and 1-1/2" vacuum breaker set• Back spud fl oor, top spud and back spud wall
models - concealed 14" x 12" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TET2LN#SS Valve only, Surface mount, Satin fi nish
• TET2LN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3
• TET2LN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3
• TET2LN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3
• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 14” x 12” stainless steel coverplate with satin fi nish and vandal resistant mounting screws. Low water consumption of 1.28 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
TET2LN Series
x xx
SupplySupplySupply
16”16”11”
ofsensor
ofsensor
ofsensor
5”3”
frame
(3-3/4"- 4-7/8") *
2-1/4” Min.
6 - 7-1/8”
2-3/8” 2-3/8” 2-3/8”
(3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") *
ElbowNut
Top SpudFinished wall Finished wall Finished wall
Bowl
BowlBowl
Back Spud Floor Mount Back Spud Wall Mount
* +/- 1/2”
14-3/4”
11-1
5/16
”
5-1/
8”
3-13
/16”
of frameand fixture
Dimensions: Inch
fixture
Opening in wall
Ope
ning
in w
all
Supply
of sensor
13-1/2”
4-3/4”*
OVE
RR
IDE
BUTT
ON
LOC
ATIO
N
LOC
ATIO
NSE
NSO
R
TET2LN SeriesHigh-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpf
#SS-00090, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.28 gpf / 4.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 35 psi (fl owing) - 125 psi* (minimum fl ow rate of 23 gpm)• Trap seal protection Automatically fl ushes once
after twenty four (24) hours of non-use
INSTALLATION NOTES
The recommended installation for the toilet fl ush valve is to have a 7" (178mm) minimum space in wall. Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.
DIAGRAM RECOMMENDED INSTALLATION
Always position the sensor above upright toilet seats and grab barsX= At least 5” clearance from sensor to tip of toilet seat upposition or to top of grab bar is required to avoid false detection.
*Leave some room for elbow nut from the wall for future maintenance.
TET2LN-31#SSTET2LN-32#SS TET2LN-33#SS
TET2GN SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1"
angle stop and 1-1/2" vacuum breaker set• 1.6 gpf or less• Back spud fl oor, top spud and back spud wall
models - concealed 14" x 12" Cover plate• 24 hour automatic fl ush for trap seal protection
COLORS/FINISHES
MODELS
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel Satin fi nish
• TET2GN#SS Valve only, Surface mount, Satin fi nish
• TET2GN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3
• TET2GN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3
• TET2GN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3• Optional Part: Z-4000-J - Adapter for ground joint angle stops
• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others• ADA compliant
TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 14” x 12” cover plate with stainless steel satin fi nish and vandal resistant mounting screws. Low water consumption of 1.6 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.
Piston Valve
• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once
after twenty four (24) hours of non-use
x xx
SupplySupplySupply
16”16”11”
ofsensor
ofsensor
ofsensor
5”3”
frame
(3-3/4"- 4-7/8") *
2-1/4” Min.
6 - 7-1/8”
2-3/8” 2-3/8” 2-3/8”
(3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") *
ElbowNut
Top SpudFinished wall Finished wall Finished wall
Bowl
BowlBowl
Back Spud Floor Mount Back Spud Wall Mount
* +/- 1/2”
14-3/4”
11-1
5/16
”
5-1/
8”
3-13
/16”
of frameand fixture
Dimensions: Inch
fixture
Opening in wall
Ope
ning
in w
all
Supply
of sensor
13-1/2”
4-3/4”*
OVE
RR
IDE
BUTT
ON
LOC
ATIO
N
LOC
ATIO
NSE
NSO
R
TET2GN SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf
#SS-00089, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.
INSTALLATION NOTES
The recommended installation for the toilet fl ush valve is to have a 7" (178mm) minimum space in wall. Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.
DIAGRAM RECOMMENDED INSTALLATIONTET2GN-31#SSTET2GN-32#SS TET2GN-33#SS
Always position the sensor above upright toilet seats and grab barsX= At least 5” clearance from sensor to tip of toilet seat upposition or to top of grab bar is required to avoid false detection.
*Leave some room for elbow nut from the wall for future maintenance.
TEL3GS & TEL5GS SeriesStandard EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with aerated fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEL3GS10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5GS10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GS60#CP - Single SupplyDischarge: On-demand; Up to 60 seconds while activated.
• TEL5GS60#CP - Thermal MixingDischarge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories: 1.0 gpm Laminar Flow Nozzle: TH559EDV908 TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline.
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
Standard EcoPower® Faucet
#SS-00420, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
Single Supply Thermal Mixing
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8" (203mm)
6"(152mm)
6-1/2"(165mm)
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)HOT
COLD
F.L.
1-3/16"(30mm)6"
(152mm)5-1/2"
(140mm)
10-1/4"(260mm)
31"(787mm)
10-1/4"(260mm)
20-3/4"(527mm)Water supply
F.L.
4-1/2"(114mm) 2-15/16"
(75mm)
2"(50mm) 4-1/2"
(114mm)
2"(50mm)
3-15/16"(100mm)
2-15/16"(75mm)
3-15/16"(100mm)
60° 60°
TEL3GS & TEL5GS Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) • Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Maximum deck thickness 2" (50mm)
TEL3GG & TEL5GG SeriesGooseneck EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with aerated fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEL3GG10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5GG10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GG60#CP - Single SupplyDischarge: On-demand; Up to 60 seconds while activated.
• TEL5GG60#CP - Thermal MixingDischarge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories: 1.0 gpm Laminar Flow Nozzle: TH559EDV432 TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate
TOTO Model #______________ Automatic infrared sensor activated gooseneck spout faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation.Maximum discharge 0.17 gallons per 10 second cycle.Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Gooseneck EcoPower® Faucet
#SS-00417, v.07Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
Single Supply Thermal Mixing
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8" (203mm)
6"(152mm)
6-1/2"(165mm)
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)HOT
COLD
F.L.
1-3/16"(30mm)6"
(152mm)5-1/2"
(140mm)
10-1/4"(260mm)
31"(787mm)
10-1/4"(260mm)
20-3/4"(527mm)Water supply
F.L.
5-7/8"(149mm)
10° 10°
5-3/4"(146mm)
9-1/8"(231mm)
9-1/8"(231mm)
2"(50mm)
2"(50mm)
5-7/8"(149mm)
5-3/4"(146mm)
TEL3GG & TEL5GG Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) • Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Maximum deck thickness 2" (50mm)
TEL3LS & TEL5LS SeriesStandard EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with aerated fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION• #CP Polished Chrome
• TEL3LS10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5LS10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V710
• Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.09 gallon per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. Both faucets use 0.09 gallon/cycle which is 55% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, California Green Code, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Standard EcoPower® Faucet
#SS-00422, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
TEL3LS & TEL5LS Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 0.09 gallons per cycle (max); 0.5 gallons per minute• Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallon of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.09 gallon of water, or 0.5 gallon per minute. This is a 64% below the base line of 0.25 gallon per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Single Supply Thermal Mixing
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8" (203mm)
6"(152mm)
6-1/2"(165mm)
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)HOT
COLD
F.L.
1-3/16"(30mm)6"
(152mm)5-1/2"
(140mm)
10-1/4"(260mm)
31"(787mm)
10-1/4"(260mm)
20-3/4"(527mm)Water supply
F.L.
4-1/2"(114mm) 2-15/16"
(75mm)
2"(50mm) 4-1/2"
(114mm)
2"(50mm)
3-15/16"(100mm)
2-15/16"(75mm)
3-15/16"(100mm)
60° 60°
Maximum deck thickness 2" (50mm)
TEL3LG & TEL5LG SeriesGooseneck EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with aerated fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• Single-hole mount• NSF compliant
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEL3LG10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5LG10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V710
• Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.09 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed inwaterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. Both faucets use 0.09 gallon/cycle which is 55% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 0.09 gallons per cycle (max) /
0.5 gallons per minute• Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
Gooseneck EcoPower® Faucet
#SS-00421, v.07Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
Single Supply Thermal Mixing
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8"(203mm)
6"(152mm)
6-1/2"(165mm)
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)
5-7/8"(149mm)
10° 10°
5-3/4" (146mm)
HOT
COLD
F.L.
1-3/16"(30mm)6"
(152mm)5-1/2"
(140mm)
10-1/4"(260mm)
9-1/8"(231mm)
9-1/8"(231mm)
2"(50mm)
2"(50mm)
31"(787mm)
10-1/4"(260mm)
20-3/4"(527mm)Water supply
F.L.
5-7/8"(149mm)
5-3/4" (146mm)
TEL3LG & TEL5LG Series
SPECIFICATIONS NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.09 gallons of water, or 0.5 gallons per minute. This is a 64% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Maximum deck thickness 2" (50mm)
TEL3GW & TEL5GW SeriesHelix® Wall-Mount EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with laminar fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• Wall 1/2” water supply male threaded• NSF compliant
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEL3GW10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5GW10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V410
• TEL3GW60#CP - Single SupplyDischarge: On-demand; Up to 60 seconds while activated.
• TEL5GW60#CP - Thermal MixingDischarge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V460R
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.13 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.13 gallon/cycle which is 35% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Helix® Wall-Mount EcoPower® Faucet
#SS-00083, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
60° 60°
Single Supply
2-3/8”(60mm)
2” (50mm) to5” (127mm)
6”(152mm) 10-1/4”
(260mm)
6-1/4”(159mm)
1-1/8”(30mm)
~33”(838mm)overall length
~33”(838mm)overall length
7-5/16”(186mm)
2-3/8”(60mm)
2” (50mm) to5” (127mm)
7-5/16” (186mm)
17-1/8” (435mm)
6-5/8” (168mm)
1-5/8” (42mm)
Thermal MixingController
8”(203mm)
6”(152mm)
1” (25mm)
3-3/4” (95mm)
1-3/8” (36mm)
HOTCOLD
ø4x403 screws with anchors
ø4x403 screws with anchors
8-5/8”(218mm)
Water Supply Single SupplyController
Thermal Mixing
TEL3GW & TEL5GW Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 10 Second Faucet: 0.13 gallon per cycle (max) 60 Second Faucet: 0.8 gpm (3.0 lpm) • Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.13 gallons of water. This is a 48% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
TEL3GC & TEL5GC SeriesHelix® EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with laminar fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEL3GC10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5GC10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GC60#CP - Single SupplyDischarge: On-demand; Up to 60 seconds while activated.
• TEL5GC60#CP - Thermal MixingDischarge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed inwaterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Helix® EcoPower® Faucet
#SS-00418, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
Single Supply Thermal Mixing
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8" (203mm)
6"(152mm)
6-1/2"(165mm
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)HOT
COLD
F.L.
1-3/16"(30mm)
6-5/8"(169mm)
4-15/16"(125mm)
6"(152mm)
5-1/2"(140mm)
10-1/4"(260mm)
1"(25mm)
1"(25mm)
31"(787mm)
10-1/4"(260mm)
6-5/8"(169mm
4-15/16"(125mm)
20-3/4"(527mm)Water supply
F.L.
30° 30°
TEL3GC & TEL5GC Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) • Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Maximum deck thickness 2" (50mm)
TEL3GK & TEL5GK SeriesAxiom® EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with laminar fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION• #CP Polished Chrome
• TEL3GK10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5GK10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GK60#CP - Single SupplyDischarge: On-demand; Up to 60 seconds while activated.
• TEL5GK60#CP - Thermal MixingDischarge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Axiom® EcoPower® Faucet
#SS-00415, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) • Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallon of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallon of water. This is a 32% below the base line of 0.25 gallon per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8"(203mm)
6"(152mm)
6-1/2"(165mm)
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)HOT
COLD
F.L.
1-3/16"(30mm)
4-11/16"(119mm)
6-5/16"(160mm)
6"(152mm)
5-1/2"(140mm)
10-1/4"(260mm)
1-3/16"(30mm)
31"(787mm)
10-1/4"(260mm)
20-3/4"(527mm)Water supply
F.L.
1-3/16"(30mm)
4-11/16"(119mm)
6-5/16"(160mm)
Single Supply Thermal Mixing
TEL3GK & TEL5GK Series
Maximum deck thickness 2" (50mm)
TEL3GT & TEL5GT SeriesFordham® EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with laminar fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION• #CP Polished Chrome
• TEL3GT10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5GT10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GT60#CP - Single SupplyDischarge: On-demand; Up to 60 seconds while activated.
• TEL5GT60#CP - Thermal MixingDischarge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Fordham® EcoPower® Faucet
#SS-00416, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
30° 30°
1"(25mm)
1"(25mm)
1-2/3"(42mm)3-3/4"
(95mm)
1-1/2"(38mm)
8"(203mm)
6"(152mm)
6-1/2"(165mm)
10-1/4"(260mm)
34"(864mm)
17-1/8"(436mm)
16-7/8"(428mm)HOT
COLD
1-3/16"(30mm)
6-5/8"(169mm)
4-15/16"(125mm)
6"(152mm)
5-1/2"(140mm)
10-1/4"(260mm)
1"(25mm)
1"(25mm)
31"(787mm)
10-1/4"(260mm)
6-5/8"(169mm)
4-15/16"(125mm)
20-3/4"(527mm)Water supply
Single Supply Thermal Mixing
F.L.F.L.
TEL3GT & TEL5GT Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) • Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Maximum deck thickness 2" (50mm)
TEL3LGW & TEL5LGW SeriesWall-Mount Gooseneck EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with aerated fl ow• Self adjusting faucet with control box and
mounting hardware, less supply lines• 1/2” water supply male threaded
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #CP Polished Chrome
• TEL3LGW10#CP - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5LGW10#CP - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V710
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.09gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. Both faucets use 0.09 gallon/cycle which is 55% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen
• Meets or exceeds ASME A112.18.1/CSA B125.1 and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California Green Code and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Wall-Mount Gooseneck EcoPower® Faucet
#SS-00615, v.01Printed in U.S.A. | © TOTO USA 02/11 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
TEL3LGW & TEL5LGW Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 0.09 gallons per cycle (max) / 0.5 gallons per minute• Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 seconds• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin• Discharge water Thermal Mixing Faucet:
temperature control Cold water - 104°F (Max)range (When used under standard conditions)
• Anti-scald safety Provides the user protection feature against exposure to
excessive water temperature(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.09 gallons of water, or 0.5 gallons per minute. This is a 64% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Dimensions:Inch (mm)
1"(25mm)
1"(25mm)
1-5/8"(42mm)3-3/4"
(95 mm)
1-1/2"(38mm)
6-1/2"(165mm)
F.L.
1-3/16"(30mm)6"
(152mm) 5-1/2"(140mm)
31"(787mm)
10-1/4"(260mm)
20-3/4"(527mm)Water supply
F.L.Single Supply Thermal Mixing
10-1/4"(260mm)
8"(203mm)
HOTCOLD
10˚
7"(177mm)
7-1/2"(190mm)
Lavatory or !nished wall (Mounting Surface)
MAX. Wall Thickness*2” (50mm)
**Spout Hole Diameter 1-1/8" (28mm) 5-9/16"
(142mm)
9-15/16"(251mm)
1-3/8" (35mm)
*Spout has the anti-rotation feature with M5 set screw on Mounting Bracket and is good for Stainless Steel sinks installation.
1-3/8" (36mm)
2" (50mm) Distance from Spout Mounting Hole to M5 Anti-Rotation* screw: 15/16" (24mm)
34"(864mm)
16-7/8"(428mm)
17-1/8"(436mm)
6"(152mm)
**Spout Hole Diameter MAX. 1-1/2” (38mm)for Stainless Steel Sinks
MIN. space req’mt in WALLfrom !nished wall 4” (100mm)
- Not recommended for 2 x 4 wall installation.- Access to back side of mounting surface is required for installation of spout mounting bracket.- Drilling is required for anti-rotation screw installation. - Plywood reinforcement is recommended for Drywall installation.
TEL3GM & TEL5GM SeriesRyohan® EcoPower® Faucet
FEATURES
• Hydropower self-generating system• Sensor faucet with laminar fl ow• Self adjusting faucet with control box and
mounting hardware,less supply lines• 1/2" water supply male threaded• Spout with special PVD fi nish designed to match
Ryohan Suite• Grid drain with cap included• NSF compliant• Single-hole mount
COLORS/FINISHES
MODELS
PRODUCT SPECIFICATION
• #RY "Ryohan" PVD fi nish
• TEL3GM10#RY - Single SupplyDischarge: On-demand; Up to 10 seconds while activated.
• TEL5GM10#RY - Thermal MixingDischarge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V410
• TEL3GM60#RY - Single SupplyDischarge: On-demand; Up to 60 seconds while activated.
• TEL5GM60#RY - Thermal MixingDischarge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V460R
TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.13 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.13 gallon/cycle which is 35% below CALGreen's baseline.
CODES/STANDARDS
• Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle
• Meets or exceeds ASME A112.18.1/CSA B125.1, NSF 61-9, and ASSE 1070*
• Certifi cations: IAPMO(cUPC), ASSE, State of Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others
• Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Effi ciency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
Ryohan® EcoPower® Faucet
#SS-00419, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
1-3/4"(45mm)Faucet
8-5/8”(218mm)
6-5/8"(168mm)
6"(152mm) 6"
(152mm)
17-1/8"(435mm)
6-5/8"(168mm)
8-1/8"(207mm)2-3/4"
(70mm)
1-5/8"(42mm)
8"(203mm)
1" (25mm)
3-3/4" (95mm)
1-3/8" (36mm)
Thermal Mixing Controller
10-1/4"(260mm)
1-1/4"(159mm)
1-1/8"(30mm)
2-3/4"(70mm) 75°
8-1/8"(207mm)
WaterSupply
HOTCOLD
Single SupplyController
1-3/4"(45mm)Faucet6-5/8"
(168mm)
Please confirm the basin dimension of lavatory, to which the faucet will be installed, making sure that it has recommended minimum dimensions of (L x W: 15" x 15").
Faucet hole diameter: Min. 28mm (~ 1-1/16") to Max. 35mm (~ 1-3/8")
Single Supply Thermal Mixing
75°
TEL3GM & TEL5GM Series
SPECIFICATIONS
• Warranty Three year warranty• Material Brass• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water
pressure: 20PSI Maximum water pressure:
125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 10 Second Faucet: 0.13 gallon per cycle (max) 60 Second Faucet: 0.8 gpm (3.0 lpm) • Water Saving Function Automatically turns OFF
when user removes hands Maximum continuous run time is 10 or 60 seconds
• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the
detection range according to the size of the basin
• Discharge water Thermal Mixing Faucet:temperature control Cold water - 104°F (Max) range (When used under standard conditions)
• Anti-scald safety Provides the user protectionfeature against exposure to excessive water temperature
(Thermal mixing faucet, only)
NOTE
Following the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.
With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.13 gallon of water. This is a 48% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.
TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Maximum deck thickness 2" (50mm)
TES_ADC-05 & TES_ADC-12 Series
Sensor Operated TOTO® Soap Dispenser
FEATURES
PRODUCT SPECIFICATION®
COLORS/FINISHES
MODELS
CODES/STANDARDS
TES_ADC-05 & TES_ADC-12 SeriesSensor Operated TOTO® Soap Dispenser
#SS-00084, v.04Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper !
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
TOTO®
INSTALLATION NOTES
FLOOR SURFACE
WAL
LSU
RFAC
E
TES1ADC-05
Not to be scaled
TES3ADC-12(Special Order)
5.8 Gallon Tank1.06 gallon tank
1.06 gallon tank
15-3/4(400mm)
14-3/16(360mm)
39' 5" (12m) Tube and Cord
16' 5" (5m) Connecting Tube
Depth: 8-1/4 (210mm)
16' 5" (5m) Tube and Cord
Air DeflationHose
HDR100#GYSensor Activated Clean Dry™ High Speed Hand Dryer
FEATURES
• AC powered hand dryer, equipped with very fast and quiet motor providing 224 mph air speed with only 62 dB noise rating
• Takes only 12 seconds to dry hands• Touch free infra red sensor activation with power saving function which turns the motor off
automatically when hands are removed or after 60 seconds of use
• Drip tray to prevent water from trickling to the fl oor• Hard wired
COLORS/FINISHES
CODES/STANDARDS
PRODUCT SPECIFICATION
• #GY Gray
• Meets or exceeds UL507, CSA C22.2 #113-M1984• Certifi cations: Intertek/ETL• Code Compliance: NEC, CEC
TOTO® Model No. _____________________________Automatic infrared sensor activated, high speed hand dryer. 120 V AC power hardwiring required. Decibel rating of 62 dB for low noise level while providing 224 mph air speed for fast drying. Low power consumption of 510 Watts. Drain Tray to collect water from hands.
HDR100#GYSensor Activated Clean Dry™ High Speed Hand Dryer
# SS-00381, v.03Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
ROUGH-INWIRING DIAGRAM
*Per tests performed at TOTO Lab.These dimensions and specifi cations are subject to change without notice.
• Warranty One Year Warranty• Power Connection Hardwired• Power Rating 120V AC, 4.25 Amps, 60 Hz,
510 W• Power Saving Function Automatically turns OFF when
hands are removed or after 60 seconds of use
• Decibel Rating 62dB• Air Speed 224 mph (100 meters/
second)• Dry Time 12 seconds*• Drain Tray Capacity 0.20 gal (700 ml)• Size 9-5/8” x 18-1/2” x 6-5/16”• Weight 10 lbs (4.5kg)• Operating Temperature 32°-104°F (0°-40°C)
INSTALLATION NOTES
For handicapped installation, refer to codes. Recess mounting will be required so that the front surface is not mare than 4" (102mm) from fi nished wall. Maximum height of air blower outlet from fi nished fl oor is 47-1/4" (1200mm) to comply with ADA Guidelines, ANSI A117.1 and CSA B651 requirements.
3-1/16(77mm)
2-1/4”(57mm)
3 HOLE BRACKET DIA. 5/32” (4mm)
ELECTRICALINLET7/8” (22mm)DIA. HOLE
9-5/8”(245mm)
18-1/2”(470mm)
6-5/16”(162mm)
B=BLACKR=REDW=WHITEBu=BLUEG=GREEN
Sensor Control Assembly
Motor
Power Connector
Power Fuse
PowerSwitch
Motor
G
B
W
B
W
WB
BuW WR
P1-1 P1-2 P3
P2P7P4P5P6
#
* 6-5/16” (162mm)
9-5/8”(245mm)
DRAIN TRAYASSY*
DRAIN TRAY
CLEARANCEFOR DRAIN TRAY**
FINISHED WALL
DIA. MOUNTINGHOLES (4)5/32” (4mm)
9.5/8”(245mm)
18-1
/2”
(470
mm
)
7
-13/
16”
(1
99m
m)
9-7
/16”
(240
mm
)
6-11
/16”
(170
mm
)
7
-13/
16”
(1
99m
m)
9-7
/16”
(240
mm
)
5/8
”(1
6mm
)
5/8”(16mm)
1
8-1/
2” (
470m
m)
10-
3/8”
(26
3mm
)
FLOOR
POWER CABEL
Ø4.5X30 (mm)SCREW
Ø4.5X30 (mm)SCREW
Ø4.5X30 (mm)SCREW
3-15/16” (100mm)
7-1/8” (180mm) 8-7/8” (224mm)
2-1/4”(57mm)
TOP COVERASSY UNIT*
*Top Cover Assy Unit and Drain Tray Assy are two separate parts.**Clearance is required in order to take off the tray for cleaning and maintenance.
6-5
/16”
(160
mm
)
4-5/16”(110mm)
7”(177mm)
(HARDWIRING)
#Recommended mounting bracket heights from floor are as follow:
-Male/Female: 53” (1346 mm)-Children: 47” (1194 mm)-Handicapped: 45” (1143 mm)
HDR110#SSSensor Activated Clean Dry™ High Speed
Concealed Hand Dryer
FEATURES
• AC powered hand dryer, equipped with very fast and quiet motor providing 224 mph air speed with only 62 dB noise rating
• Takes only 12 seconds to dry hands• Touch free infra red sensor activation with power saving function which turns the motor off
automatically when hands are removed or after 60 seconds of use
• Drip tray to prevent water from trickling to the fl oor• Hard wired• Mounts fl ush with the wall for clean design• Flush mounting deters vandalism• Quality, attractive construction with stainless steel body
COLORS/FINISHES
CODES/STANDARDS
PRODUCT SPECIFICATION
• #SS Stainless Steel
• Meets or exceeds UL507, CSA C22.2 #113-M1984• Certifi cations: Intertek/ETL• Code Compliance: NEC, CEC• ADA compliant
TOTO® Model No. _____________________________Automatic infrared sensor activated, high speed hand dryer. 120 V AC power hardwiring required. Decibel rating of 58dB for low noise level while providing 224 mph air speedfor fast drying. Low power consumption of 510 Watts. Drain Tray to collect water from hands.
Sensor
ControlAssembly
Motor
PowerConnector Power Fuse
Motor
G
B
W
WB
W W
P1-1P1-2 P3
P2P7P6
15A
B=BLACKW=WHITEG=GREEN
HDR110#SSSensor Activated Clean Dry™ High Speed Concealed Hand Dryer
# SS-00427, v.02Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
*Per tests performed at TOTO Lab.These dimensions and specifi cations are subject to change without notice.
• Warranty One Year Warranty• Material Stainless Steel• Power Connection Hardwired• Power Rating 120V AC, 4.25 Amps, 60 Hz,
510 W• Power Saving Function Automatically turns OFF when
hands are removed or after 60 seconds of use
• Decibel Rating 58dB• Air Speed 224 mph (100 meters/
second); 19,950 LFM (linear feet per minute)• Dry Time 12 seconds*• Drain Tray Capacity 0.27 gal (950 ml)• Size 12-5/8” x 28-3/4” x 6-7/16”• Weight 22 lbs (10 kg)• Operating Temperature 32°-104°F (0°-40°C)
INSTALLATION NOTES
For handicapped installation, refer to codes. Maximum height of an blower outlet from fi nished fl oor is 47-1/4" (1200mm) to comply with ADA Guidelines ANSI A117.1 and CSA B651 requirements.
ROUGH-INWIRING DIAGRAM
Recommended mounting bracket heights from floor are
-Male/Female: 30” (762 mm)-Children: 24” (610 mm)-Handicapped: 22” (559 mm)
FINISHED FLOOR
*1-9/16! (40mm)
FINISHED WALL
OPE
N W
ALL
*1-9/16! (40mm)
26-5
/16!
(668
mm
)
11-1/2!(292mm)5-1/8!
(130mm)
1-5/16!(34mm)
27-9
/16!
- 27
-5/8! (
700±
2 m
m)
1-9/16! (40mm)
12-5/8!(320mm)
28-3
/4!
(730
mm
)
5-1/8!(130mm)6-7/16!
(164mm)
26-5
/16!
(668
mm
)
9-15
/16!
(2
52m
m)
2!(50mm)
#
DRAIN TRAY
TOP COVER
FROM FINISHED WALLTO BRACKET HOLES
*WALL THICKNESS REQUIREMENT: MIN 3/16 in (5mm) TO MAX. 1-3/16 (30mm)
2”X4” STUD
2”X4” STUD
POWER CABEL(HARDWIRING)
3-1/8! (80mm)FROM STUD TO BRACKET HOLE
3-9/16! (90mm)FROM STUD TOBRACKET HOLE
FROM FINISHED WALLTO BRACKET HOLES
FINISHEDWALL
#
11-13/16! (300mm)OPEN WALL
COMPARTMENT SIZE 11-3/8” x 5-3/8” x 11-1/2”(289mm x 137mm x 292mm)
FEATURES
• 60-3/8" x 36-1/4" x 22-1/4"• Elegant, deep soaking design• Cast iron construction provides years of durability• Slip-resistant surface• Stainless steel grab bars
FBY1500PEnameled Cast Iron Bathtub
CODES/STANDARDS
PRODUCT SPECIFICATION
• Meets and exceeds ASME A112.19.1/CSA B45.2• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
COLORS/FINISHES
• Shell Color #01 Cotton #12 Sedona Beige
The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1500P___ .
#SS-00312, v.02Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
FBY1500PEnameled Cast Iron Bathtub
SPECIFICATIONS
• Size 60-3/8"L x 36-1/4"W • Depth 22-1/4"• Warranty Lifetime Limited Warranty • Material Enameled Cast Iron• Shipping Weight 353 lbs.• Shipping Dimensions 76-15/16"L x 40-3/8"W x
23-5/8"H
These dimensions and specifi cations are subject to change without notice
60-3/8" (1533mm)
53-11/16" (1363mm)
30-11/16" (780mm) 12-7/8"(327mm)
36-1/4"(920mm)
8-1/4"(210mm)
2-3/4" (70mm)3-15/16"(100mm)
19-5/8"(500mm)
18-1/8" (460mm)
18-1/8" (460mm)
22-1/4"(565mm)
19-11/16"(500mm)
2-3/16"(55mm)
2-3/4"(70mm)
DIA 2-3/8"(60mm)
8-1/4"(210mm)
8-1/4"(210mm)
INSTALLATION NOTES
A frame cutout guide is available for drop-in installation. A template is available for under mount installation.
FEATURES
• 59-3/4" x 30" x 14-11/16"• Apron front• Cast-iron construction provides years of durability• Slip-resistant surface
FBY1515Enameled Cast Iron Bathtub
PRODUCT SPECIFICATION
COLORS/FINISHES
• Shell Color #01 Cotton #12 Sedona Beige
MODELS
• FBY1515LP Left hand drain
• FBY1515RP Right hand drain
The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1515___.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.1/CSA B45.2• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
#SS-00423, v.02Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
FBY1515Enameled Cast Iron Bathtub
SPECIFICATIONS
• Size 59-3/4"L x 30"W• Depth 14-11/16"• Warranty Lifetime Limited Warranty • Material Enameled Cast Iron• Shipping Weight 370.7 lbs.• Shipping Dimensions 62-5/8"L x 32-7/8"W x 18-1/2"H
These dimensions and specifi cations are subject to change without notice
59-3/4" (1517mm)
55" (1397mm)
31-1/2" (800mm) 12-7/8" (327mm)
30"(762mm)
2-3/8" (60mm)
3" (76mm)
7-7/8"(200mm)
7-7/8"(200mm)
2-3/16"(55mm)
2-3/8" (60mm)2-3/8"(60mm)
24-5/8"(626mm)
14-11/16"(373mm)
13-1/4" (337mm)
5/16" (8mm)
15-5/16"(389mm)
14-3/8"(365mm)
1/8"(3.5mm)
1/8"(3.5mm)
2-3/4"(70mm)
DIA 2-3/8"(60 mm)
8-11/16"(220mm)
8-11/16"(220mm)
FEATURES
• 59-3/4" x 32" x 16-3/4"• Cast-iron construction provides years of durability• Slip-resistant surface• Apron front• Tile-in fl anges on 3 sides
FBY1525Enameled Cast Iron Bathtub
PRODUCT SPECIFICATION
COLORS/FINISHES
MODELS
• Shell Color #01 Cotton #12 Sedona Beige
• FBY1525LP Left hand drain
• FBY1525RP Right hand drain
The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1525___.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.1/CSA B45.2• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
#SS-00313, v.04Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
FBY1525Enameled Cast Iron Bathtub
SPECIFICATIONS
• Size 59-3/4"L x 32"W • Depth 16-3/4"• Warranty Lifetime Limited Warranty • Material Enameled Cast Iron• Shipping Weight 397 lbs.• Shipping Dimensions 62-5/8"L x 34-13/16"W x
20-1/4"H
These dimensions and specifi cations are subject to change without notice
59-3/4" (1517mm)
53-1/16" (1347mm) 2-3/4" (70mm)
26-1/8" (663mm)
2-15/16" (75mm)
ø2-3/16" (ø55mm)
16" (406mm)
32" (813mm)
7 7/8" (200mm)
15-1/4" (387mm)
3/16 (4mm)
12-7/8" (327mm)30-1/2" (774mm)
3/16" (4mm)
3/8" (10mm)
16-5/16" (415mm)
8-3/8" (212mm) 8-3/8" (213mm)
ø2-3/8" (ø60mm)
2-3/4" (70mm)
3/8" (10mm)
16-3/4" (425mm)
FEATURES
• 59-1/16" x 31-1/2" x 23-1/4"• Elegant, drop in styling• Cast-iron construction provides years of durability• Slip-resistant surface
FBY1550PEnameled Cast Iron Bathtub
PRODUCT SPECIFICATION
COLORS/FINISHES
• Shell Color #01 Cotton #12 Sedona Beige
The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1550P___.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.1/CSA B45.2• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
# SS-00410, v.01Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
FBY1550PEnameled Cast Iron Bathtub
SPECIFICATIONS
• Size 59-1/16"L x 31-1/2"W • Depth 23-1/4"• Warranty Lifetime Limited Warranty • Material Enameled Cast Iron• Shipping Weight 346 lbs.• Shipping Dimensions 63-3/8"L x 35-13/16"W x
28-5/16"H
These dimensions and specifi cations are subject to change without notice
B
B
59-1/16"(1500mm)
2-3/4"(70mm)
2-9/16"(65mm)
34-7/16"(875mm)
13"(330mm)
8-7/16"(215mm)
19-11/16"(500mm) 23-1/4"
(590mm)
31-1/2"(800mm)
ø2-3/16"(ø55mm)
3-3/8"(85mm)
B-B
2-3/4"(70mm) ø2-3/8"
(ø60mm)
10"(255mm)
10"(255mm)
INSTALLATION NOTES
A frame cutout guide is available for drop-in installation. A template is available for under mount installation.
FEATURES
• 66" x 32" x 18-5/16"• Luxurious, deep soaking drop in design• Cast-iron construction provides years of durability• Slip-resistant surface
FBY1700PEnameled Cast Iron Bathtub
PRODUCT SPECIFICATION
COLORS/FINISHES
• Shell Color #01 Cotton #12 Sedona Beige
The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1700P___.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.1/CSA B45.2• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
#SS-00314, v.02Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
FBY1700PEnameled Cast Iron Bathtub
SPECIFICATIONS
• Size 66"L x 32"W • Depth 18-5/16"• Warranty Lifetime Limited Warranty • Material Enameled Cast Iron• Shipping Weight 309 lbs.• Shipping Dimensions 70-1/16"L x 36-5/16"W x
23-13/16"H
These dimensions and specifi cations are subject to change without notice
13/16" (20mm)
13" (330mm)
33-7/16" (850mm)9-1/4" (235mm)9-1/4" (235mm)
2-3/4" (70mm)ø2-3/8" (ø60mm)
66" (1676mm)
ø2-3/16" (ø55mm)
32" (813mm)
8-1/2" (216mm)
16" (406.5mm)
3" (76mm)59-1/16" (1500mm)
27-11/16" (703mm)
2-3/16" (55mm)
17-1/2" (445mm)16-15/16" (430mm)
INSTALLATION NOTES
A frame cutout guide is available for drop-in installation. A template is available for under mount installation.
FEATURES
• 65-3/4" x 32" x 16-3/4"• Apron front• Cast-iron construction provides years of durability• Slip-resistant surface• Tile-in fl anges on 3 sides
FBY1715Enameled Cast Iron Bathtub
PRODUCT SPECIFICATION
COLORS/FINISHES
• Shell Color #01 Cotton #12 Sedona Beige
MODELS
• FBY1715LP Left hand drain
• FBY1715RP Right hand drain
The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1715___.
CODES/STANDARDS
• Meets and exceeds ASME A112.19.1/CSA B45.2• Certifi cations: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
#SS-00315, v.03Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
FBY1715Enameled Cast Iron Bathtub
SPECIFICATIONS
• Size 65-3/4"L x 32"W • Depth 16-3/4"• Warranty Lifetime Limited Warranty • Material Enameled Cast Iron• Shipping Weight 441 lbs.• Shipping Dimensions 68-11/16"L x 35-1/16"W x
20-1/4"H
These dimensions and specifi cations are subject to change without notice
37" (940mm)
65-3/4" (1670mm)
3/16" (4mm)
12-7/8" (327mm)
3/16" (4mm)
32" (813mm)
ø2-3/16" (ø55mm)
7-7/8" (200mm)2-3/4" (70mm)ø2-3/8" (ø60mm)
16" (406.5mm)
58-1/4" (1480mm)2-3/4" (70mm)
25-5/16" (643mm)
3-3/8" (85mm)
16-5/16" (415mm)
3/8" (10mm)
8-1/4" (210mm) 8-1/4" (210mm)
16-3/4" (425mm)
3/8" (10mm)
15-1/4" (387mm)
TOTO U.S.A., INC.1155 SOUTHERN ROADMORROW, GA 30260800-350-8686
www.totousa.comwww.totology.com
#K122010Printed in U.S.A. 08/2010
Recommended