View
1
Download
0
Category
Preview:
Citation preview
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint. Visit https://www.skheme.com/about-us/terms-and-conditions/ for more information.
PRODUCT TYPE:
COLOURS:
SIZES:
FINISHES/USAGE:
AESTHETIC QUALITIES:
TECHINICAL INFO:
ORIGIN:
VARIATION:
Glazed Porcelain Floor Tile
Neutra, Aldea, Cuero and Arcilla
75x300mm and 600x600mmRectified edges
Matt and GripFloor and wall
Warm Mediterranean colours
P3 Pendulum Slip Rating (Matt) P5 Pendulum Slip Rating (Grip)More technical info on the last page
Italy
Made in Italy, COTTO Series is a modern twist on traditional Mediterranean cotto flooring.
Featuring a soft textured surface and warm tones, COTTO is available in both a matt and grip
finish and contemporary sizes, allowing it to be a versatile indoor/outdoor tile.
V3
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
NEUTRA GRIP
ALDEA GRIPALDEA MATT
NEUTRA MATT
FORMATS
600x600mm
75x300mm
PRODUCT SPECIFICATIONS
SIZES
75x300mm
600X600mm
600X600mm
FINISHES
MATT
MATT
GRIP
TILE EDGE
RECTIFIED
RECTIFIED
RECTIFIED
SLIP RATING
P3 Pendulum
P3 Pendulum
P5 Pendulum
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint.
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
CUERO GRIP
ARCILLA GRIPARCILLA MATT
CUERO MATT
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint.
FORMATS
600x600mm
75x300mm
PRODUCT SPECIFICATIONS
SIZES
75x300mm
600X600mm
600X600mm
FINISHES
MATT
MATT
GRIP
TILE EDGE
RECTIFIED
RECTIFIED
RECTIFIED
SLIP RATING
P3 Pendulum
P3 Pendulum
P5 Pendulum
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint.
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint.
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint.
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint.
2/12 Neild Avenue Rushcutters Bay, NSW 2010 AUSTRALIA
P +61 2 8755 2300 | F +61 2 8755 2350 | E info@skheme.com
Cotto
Please note that all products must be fabricated using score & snap method and/or wet cutting in conjunction with AS/NZS 1716:2012, AS/NZS 1715:2009, AS/NZS 60335.2.69:2017” For more information please refer to: https://www.safework.nsw.gov.au
Variation is an inherent property of tiles and stone. Sizes are nominal and may include a joint.
TECHNICAL DATA
technical characteristics
water absorption
modulus of rupture
surface quality
thermal shock resistance
deep abrasion resistance
chemical resistance
resistance to frost
staining resistance
test method
ISO 10545-3
ISO 10545-4
ISO 10545-2
ISO 10545-9
ISO 10545-6
ISO 10545-13
ISO 10545-12
ISO 10545-14
required values
≤0.5%
≥ 35 N/mm2
Complies with the standards
No sample must show visible defects
≤ 175 mm3
Declared value
Resistant
Minimum Class 3
result
≤0.2%
compliant
≥95%
compliant
compliant
compliant
compliant
compliant
Recommended