View
217
Download
0
Category
Preview:
Citation preview
8/12/2019 Cisco Reviewer
1/7
IEEE Standards
IEEE 802.1 Bridging (networking) and Network Management
IEEE 802.2 LLC
IEEE 802.3 Ethernet
IEEE 802.4 Token bus
IEEE 802.5 Defines the MAC layer for a Token Ring
IEEE 802.6 MANs (DQDB)
IEEE 802.8 Fiber Optic TAG disbanded
IEEE 802.11 Wireless LAN (WLAN) & Mesh (Wi-Fi certification)
IEEE 802.14 Cable modems disbanded
IEEE 802.15 Wireless PAN
IEEE 802.15.1 Bluetooth certification
IEEE 802.15.2 IEEE 802.15 and IEEE 802.11 coexistence
IEEE 802.16 Broadband Wireless Access (WiMAX certification)
Common Port Numbers
21 FTP
23TELNET
25 SMTP
69 TFTP -UDP
8/12/2019 Cisco Reviewer
2/7
80 HTTP
143 IMAP
194 INTERNET RELAY CHAT (IRC)
443 SECURE HTTP (HTTPS)
520 RIPUDP
Dynamic Host Configuration Protocol (DHCP)
DHCP discovery DHCP offer DHCP request DHCP acknowledgement DHCP information DHCP releasing Domain Name System (DNS) is a hierarchical distributed naming
system for computers, services, or any resource connected to the
Internet or a private network. It associates various information
with domain names assigned to each of the participating entities
File Transfer Protocol (FTP) is a standard network protocol used totransfer files from one host to another host over a TCP-based
network, such as the Internet.
8/12/2019 Cisco Reviewer
3/7
Hypertext Transfer Protocol (HTTP) is an application protocol fordistributed, collaborative, hypermedia information systems.HTTP
is the foundation of data communication for the World Wide
Web.
Internet message access protocol (IMAP) is a protocol for e-mailretrieval.
Internet Relay Chat (IRC) is a protocol for live interactive Internettext messaging (chat) or synchronous conferencing.
Real-time Transport Protocol (RTP) defines a standardized packetformat for delivering audio and video over IP networks
Routing Information Protocol (RIP) is one of the oldest distance-vector routing protocols, which employs the hop count as a
routing metric. RIP prevents routing loops by implementing a limit
on the number of hops allowed in a path from the source to a
destination. The maximum number of hops allowed for RIP is 15.
This hop limit, however, also limits the size of networks that RIP
can support. A hop count of 16 is considered an infinite distance,
in other words the route is considered unreachable.
Simple Mail Transfer Protocol (
SMTP) is an Internet standard for
electronic mail (e-mail) transmission across Internet Protocol (IP)
networks.
8/12/2019 Cisco Reviewer
4/7
Secure Shell (SSH) is a cryptographic network protocol for securedata communication, remote command-line login, remote
command execution, and other secure network services between
two networked computers that connects, via a secure channelover an insecure network, a server and a client (running SSH
server and SSH client programs, respectively)
Telnetis a network protocol used on the Internet or local areanetworks to provide a bidirectional interactive text-oriented
communication facility using a virtual terminal connection. User
data is interspersed in-band with Telnet control information in an
8-bit byte oriented data connection over the Transmission Control
Protocol (TCP).
Transmission Control Protocol (TCP) is one of the core protocolsof the Internet protocol suite (IP), and is so common that the
entire suite is often called TCP/IP. TCP provides reliable, ordered,
error-checked delivery of a stream of octets between programs
running on computers connected to a local area network, intranet
or the public Internet. It resides at the transport layer.
User Datagram Protocol (UDP) is one of the core members of theInternet protocol suite (the set of network protocols used for the
Internet). With UDP, computer applications can send messages, in
this case referred to as datagrams, to other hosts on an Internet
Protocol (IP) network without prior communications to set up
special transmission channels or data paths.
8/12/2019 Cisco Reviewer
5/7
Internet Protocol (IP) is the principal communications protocol inthe Internet protocol suite for relaying datagrams across network
boundaries. Its routing function enables internetworking, and
essentially establishes the Internet.
Internet Control Message Protocol (ICMP) is one of the coreprotocols of the Internet Protocol Suite. It is used by network
devices, like routers, to send error messages indicating, for
example, that a requested service is not available or that a host or
router could not be reached.
Address Resolution Protocol (ARP) is a telecommunicationsprotocol used for resolution of network layer addresses into link
layer addresses, a critical function in multiple-access networks.
ARP was defined by RFC 826 in 1982.[1] It is Internet Standard STD
37. It is also the name of the program for manipulating these
address
Point-to-Point Protocol (PPP) is a data link protocol commonlyused in establishing a direct connection between two networking
nodes. It can provide connection authentication, transmission
encryption (using ECP, RFC 1968), and compression.
Network Address Translation (NAT) is designed for IP addressconservation. It enables private IP nletworks that use unregistered
IP addresses to connect to the Internet. NAT operates on a router,
usually connecting two networks together, and translates the
private (not globally unique) addresses in the internal network
8/12/2019 Cisco Reviewer
6/7
into legal addresses, before packets are forwarded to another
network.
Protocol data unit (PDU) has the following meanings:
Information that is delivered as a unit among peer entities of a network
and that may contain control information, such as address information,
or user data.
In a layered system, a unit of data which is specified in a protocol of a
given layer and which consists of protocol-control information and
possibly user data of that layer
Protocol Data Unit (PDU)
The Layer 1 (Physical Layer) PDU is the bit or, more generally, symbol
(can also be seen as "stream")
The Layer 2 (Data Link Layer) PDU is the frame
The Layer 3 (Network Layer) PDU is the packet
The Layer 4 (Transport Layer) PDU is the segment for TCP, or the
datagram for UDP
Characteristics of transport layer protocols
TCP and UDP port numbers are used by application layer protocols.
TCP uses windowing and sequencing to provide reliable transfer of
data.
8/12/2019 Cisco Reviewer
7/7
TCP is a connection-oriented protocol. UDP is a connectionless
protocol.
Description of a router memory type and its contents
ROM is nonvolatile and contains basic diagnostic software.
RAM is volatile and stores the IP routing table.
Recommended