View
2
Download
0
Category
Preview:
Citation preview
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
Signed and sealed for and on behalf of CERTIFIRE
Sir Ken Knight Paul Duggan Chairman Certification Manager
WCL Impartiality Committee Warrington Certification Ltd
CERTIFICATE OF APPROVAL No CF 5168
This is to certify that, in accordance with
TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of
1
Page 1 of 8
EWAI COMPANY LIMITED
Hamad Medical City CP300B Hospital Fit Out P.O.Box P3808, Doha, Qatar
Tel: 974-7013-5381 Fax: 974-4437-7359
Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions
appended hereto: _____________________________________________________________________________________________________
CERTIFIED PRODUCT TECHNICAL SCHEDULE
Non-Load Bearing 1 Hr and 2 Hr Fire Rated Plaster Board Shaft Wall and Drywall Partitions
TS49 Vertical and Horizontal Separating Elements
Issued: 29th October 2015
Valid to: 28th October 2020
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5168 EWAI COMPANY LIMITED
Page 2 of 8 Signed AH/008
Issued: 29th
October 2015 Valid to: 28
th October 2020
EWAI Corporation– Non-Load Bearing 1 Hr and 2 Hr Fire Rated Plaster Board Shaft Wall and Drywall Partitions Comprising Gyproc boards and Gypframe and A-Metal studs and tracks
1. This approval relates to the use of the above partitions in providing a fire resistance performance of up to 120 minutes insulation, and integrity, as defined in BS 476: Part 22: 1987.
2. As these constructions have been tested following the requirements of the ASTM E119-12a; Standard Test Methods for Fire Tests of Building Construction and Materials, they also show a Fire Resistance Rating as defined in this standard of up to 120 minutes.
3. This certification is designed to demonstrate compliance of the product or system specifically with Approved Document B (England and Wales), Section 2 of the Technical Standards (Scotland), Technical Booklet E (N. Ireland). If compliance is required to other regulatory or guidance documents there may be additional considerations or conflict to be taken into account.
4. The partitions are approved on the basis of:
i) Initial type testing ii) Audit testing at the frequency specified in TS49
iii) A design appraisal against TS49 iv) Inspection and surveillance of factory production control v) Certification of Quality Management Systems to ISO 9001:2008
5. Initial type testing was done using the ASTM E119-12a; Standard Test Methods for Fire
Tests of Building Construction and Materials. The test results were assessed by Exova
Warringtonfire against the requirements of the BS 476: Part 22: 1987.
6. Inspection and surveillance was carried out at the building site where the partitions were
constructed.
7. The non-loadbearing partition assemblies comprise Gyproc building boards fixed onto a
Gypframe or A-Metal metal framing system. 8. The partition assemblies shall be mechanically fixed to wall and floor constructions having
a fire resistance of at least the same period as the partition. 9. The approval relates to ongoing production. The product and/or its immediate packaging is
identified with the manufacturer’s name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate.
This approval relates to non-loadbearing partition assemblies in terms of the integrity and insulation performance criteria of BS 476: Part 22: 1987.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5168 EWAI COMPANY LIMITED
Page 3 of 8 Signed AH/008
Issued: 29th
October 2015 Valid to: 28
th October 2020
Plaster Board Shaft Wall/120 minutes integrity and insulation - 1 The minimum specification for the EWAI Corporation 120 minute partition system (option 1) is as follows: Facing – fire side Facing – unexposed side I-studs Perimeter tracks Fixings of panels
2 layers of Gyproc FireStop board, thickness 15 mm 1 layer of Gyproc Coreboard, thickness 19 mm
Gypframe 150SC29, 150/90 x 0.9 mm, at 600 mm centres Gypframe 150DC29, 150 x 0.9 mm, anchored at 600 mm centres 25 mm (first layer) and 42 mm (second layer) Gyproc Jack point
screws at 300 mm centres Sealant Gyproc Jointing Compound and Gyproc Paper Tape over the panel
joints Cavity insulation 24 kg/m
3 glass wool, thickness 100 mm
This shaft wall has a Fire Resistance Rating of 120 minutes as specified in the ASTM E119-12a; Standard Test Methods for Fire Tests of Building Construction and Materials Plaster Board Shaft Wall/120 minutes integrity and insulation - 2 The minimum specification for the EWAI Corporation 120 minute partition system (option 2) is as follows: Facing – fire side Facing – unexposed side I-studs Perimeter tracks Fixings of panels
1 layer of Gyproc FireStop board, thickness 15 mm (inside) 1 layer of Gyproc FireStop MR board, thickness 15 mm (outside) 1 layer of Gyproc Coreboard, thickness 19 mm
Gypframe 150SC29, 150/90 x 0.9 mm, at 600 mm centres Gypframe 150DC29, 150 x 0.9 mm, anchored at 600 mm centres 25 mm (first layer) and 42 mm (second layer) Gyproc Jack point
screws at 300 mm centres Sealant Gyproc Jointing Compound and Gyproc Paper Tape over the panel
joints Cavity insulation 24 kg/m
3 glass wool, thickness 100 mm
This shaft wall has a Fire Resistance Rating of 120 minutes as specified in the ASTM E119-12a; Standard Test Methods for Fire Tests of Building Construction and Materials
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5168 EWAI COMPANY LIMITED
Page 4 of 8 Signed AH/008
Issued: 29th
October 2015 Valid to: 28
th October 2020
Drywall system/120 minutes integrity and insulation The minimum specification for the EWAI Corporation 120 minute partition system is as follows: Facing - symmetrical C-studs Perimeter tracks Fixings of panels
2 layers of Gyproc FireStop board, thickness 15 mm A-Metal C-stud, 121.5 x 34/36 x 0.9 mm, at 600 mm centres A-Metal Extra Deep Track, 125 x 0.9 mm, nailed at 300 mm centres 25 mm (first layer) and 42 mm (second layer) Gyproc Jack point
screws at 300 mm centres Sealant Gyproc Jointing Compound and Gyproc Fiber Tape over the panel
joints
Cavity insulation 24 kg/m3 glass wool, thickness 100 mm
This drywall system has a Fire Resistance Rating of 120 minutes as specified in the ASTM E119-12a; Standard Test Methods for Fire Tests of Building Construction and Materials Drywall system/60 minutes integrity and insulation The minimum specification for the EWAI Corporation 60 minute partition system is as follows: Facing - symmetrical C-studs Perimeter tracks Fixings of panels
1 layers of Gyproc FireStop board, thickness 15 mm A-Metal C-stud, 121.5 x 34/36 x 0.9 mm, at 600 mm centres A-Metal Extra Deep Track, 125 x 0.9 mm, nailed at 300 mm centres 25 mm Gyproc Jack point screws at 300 mm centres
Sealant Gyproc Jointing Compound and Gyproc Fiber Tape over the panel joints
Cavity insulation 24 kg/m3 glass wool, thickness 100 mm
This drywall system has a Fire Resistance Rating of 60 minutes as specified in the ASTM E119-12a; Standard Test Methods for Fire Tests of Building Construction and Materials Typical detail drawings of the partitions are given below.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5168 EWAI COMPANY LIMITED
Page 5 of 8 Signed AH/008
Issued: 29th
October 2015 Valid to: 28
th October 2020
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5168 EWAI COMPANY LIMITED
Page 6 of 8 Signed AH/008
Issued: 29th
October 2015 Valid to: 28
th October 2020
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5168 EWAI COMPANY LIMITED
Page 7 of 8 Signed AH/008
Issued: 29th
October 2015 Valid to: 28
th October 2020
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5168 EWAI COMPANY LIMITED
Page 8 of 8 Signed AH/008
Issued: 29th
October 2015 Valid to: 28
th October 2020
Further Information Further information regarding the details contained in this data sheet may be obtained from Technical Supplies and Services Co. Ltd. (Tel: + +971 4 8850474). Further information regarding CERTIFIRE certification and other approved products can be obtained from CERTIFIRE (Tel: 01925 646777, website: www.warringtonfire.net).
Recommended