CCNA 2 v3.0 Module 3 Configuring a Router

1© 2003, Cisco Systems, Inc. All rights reserved.

CCNA 2 v3.0 Module 3 Configuring a Router

222© 2003, Cisco Systems, Inc. All rights reserved.

Objectives

• Configuring a router

• Finishing the configuration

333© 2003, Cisco Systems, Inc. All rights reserved.

Command-Line InterfaceCommand Modes

444© 2003, Cisco Systems, Inc. All rights reserved.

Configuring a Router Name

A router should be given a unique name as one of the first configuration tasks. This task is accomplished in global configuration mode using the following commands:

Router(config)#hostname MostafaTokyo(config)#

555© 2003, Cisco Systems, Inc. All rights reserved.

Configuring Router Passwords

666© 2003, Cisco Systems, Inc. All rights reserved.

Examining the show Commands

• There are many show commands that you can use to examine the contents of files in the router and for troubleshooting.

• In both privileged EXEC and user EXEC modes, the command show ? provides a list of available show commands.

777© 2003, Cisco Systems, Inc. All rights reserved.

Serial Interface Configuration Commands

888© 2003, Cisco Systems, Inc. All rights reserved.

Configuring an Ethernet Interface

• To configure an Ethernet interface follow these steps:

Enter global configuration mode.

Enter interface configuration mode.

Specify the interface address and subnet mask.

Enable the interface.

999© 2003, Cisco Systems, Inc. All rights reserved.

Importance of Configuration Standards

101010© 2003, Cisco Systems, Inc. All rights reserved.

Configuring Interface Descriptions

An interface description should be used to identify important information such as a distant router, a circuit number, or a specific network segment.

111111© 2003, Cisco Systems, Inc. All rights reserved.

Login Banners

121212© 2003, Cisco Systems, Inc. All rights reserved.

Configuring Message-of-the-Day (MOTD)

131313© 2003, Cisco Systems, Inc. All rights reserved.

Host Name Resolutions

• Host name resolution is the process that a computer system uses to associate a host name with an IP address.

• Host names, unlike DNS names, are significant only on the router on which they are configured.

141414© 2003, Cisco Systems, Inc. All rights reserved.

Configuring Host Tables

151515© 2003, Cisco Systems, Inc. All rights reserved.

Configuration Backup and Documentation

161616© 2003, Cisco Systems, Inc. All rights reserved.

Using the copy running-config tftp Command

171717© 2003, Cisco Systems, Inc. All rights reserved.

Using the copy tftp running-config Command