View
305
Download
1
Category
Preview:
DESCRIPTION
catalog
Citation preview
3Elektrorohre und Zubehr Conduits and Fittings PVC
Rohreconduits
PVC
Starre Rohre und Zubehr PVCBiegsame Rohre und Zubehr PVC
Rigid Conduits and Fittings PVCPliable Conduits and Fittings PVC
4Elektrorohre und Zubehr Conduits and Fittings PVC
Starre und biegsamePVC-Isolierrohreleichte Ausfhrung
FX
16 1,00 14,00 111 06493620 1,10 17,80 111 06493725 1,20 22,60 57 06493832 1,30 29,40 57 06493940 1,50 37,00 21 06494050 1,80 46,40 21 064941
16 12,10 50 2700 01985520 15,20 50 2700 01985625 19,30 50 1600 01985732 26,60 25 675 01985840 34,00 25 500 01985950 44,00 25 300 01986063 55,70 25 175 019861
Rigid and PliablePVC Conduitslight gauge
rigid conduitin lengths of 3m, socketed on one end
starres Rohrin Stangen zu 3m, einseitig aufgemufft
EN 50086-2-2
pliable conduitin coils of 50m resp. 25m
biegsames Rohrin Ringen zu 50m bzw. 25m
colour: light grey (RAL 7035)compression strength: > 320 Nclassification: EN 2221temperature rating: -5C to +60C
Farbe: Hellgrau (RAL 7035)Druckfestigkeit: > 320 NKennzeichen: EN 2221Einsatzbereich: -5C bis +60C
320 N
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
Konditionsgruppe category 1
Konditionsgruppe category 3
VRMEN 50086-2-1
5Elektrorohre und Zubehr Conduits and Fittings PVC
Rohreconduits
PVC
16 11,00 50 2700 01986220 14,50 50 2700 01986325 18,80 50 1600 01986432 24,50 25 675 01986540 31,30 25 500 01986750 39,70 25 300 01986863 52,20 25 175 019869
16 10,70 50 2700 01987620 14,40 50 2700 01987725 18,80 50 1600 01987832 24,80 25 675 01987840 31,40 25 500 01988050 39,70 25 300 01988163 51,10 25 175 019882
16 1,20 13,60 111 06494220 1,30 17,40 111 06494325 1,50 22,00 57 06494432 1,70 28,60 57 06494540 1,80 36,40 21 06494650 2,30 45,40 21 06494763 2,50 58,00 21 064948
Starre und biegsamePVC-Panzerrohremittlere Ausfhrung
UPRM
Rigid and PliablePVC Conduitsmedium gauge
rigid conduitin lengths of 3m, socketed on one end
starres Rohrin Stangen zu 3m, einseitig aufgemufftEN 50086-2-1
colour: grey (RAL 7037)compression strength: > 750 Nclassification: EN 3341temperature rating: -25C to +60C
Farbe: Grau (RAL 7037)Druckfestigkeit: > 750 NKennzeichen: EN 3341Einsatzbereich: -25C bis +60C
FXPEN 50086-2-2
pliable conduitin coils of 50m resp. 25m
biegsames Rohrin Ringen zu 50m bzw. 25m
FXPMEN 50086-2-2
pliable conduitwith plastic outer coatingin coils of 50m resp. 25m
biegsames Rohrmit Kunststoffummantelungin Ringen zu 50m bzw. 25m
750 N
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
Konditionsgruppe category 5
Konditionsgruppe category 7
Konditionsgruppe category 9
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
6Elektrorohre und Zubehr Conduits and Fittings PVC
16 1,70 12,60 111 06494920 1,80 16,40 111 06495025 1,90 21,20 57 06495132 2,50 27,00 57 064952
16 10,70 50 2700 02357220 14,10 50 2700 02357325 18,30 50 1600 02357432 24,30 25 675 023575
16 100 1200 020601 020594 02066220 100 800 020602 020595 02066325 50 600 020603 020596 02066432 25 300 020604 020597 02066540 25 200 020605 02059850 15 120 020606 02059963 8 64 020607 020600
Starre und biegsamePVC-Panzerrohreschwere Ausfhrung
BSSH
Rigid and PliablePVC Conduitsheavy gauge
rigid conduitin lengths of 3m, plain ends
starres Rohrin Stangen zu 3m, ungemufftEN 50086-2-1
colour: black (RAL 9905)compression strength: > 1250 Nclassification: EN 4421temperature rating: -5C to +60C
Farbe: Schwarz (RAL 9005);Druckfestigkeit: > 1250 NKennzeichen: EN 4421Einsatzbereich: -5C bis +60C
1250 N
FXPSEN 50086-2-2
pliable conduitin coils of 50m resp. 25m
biegsames Rohrin Ringen zu 50m bzw. 25m
Zubehhr frPVC-ElektrorohreEinsatzbereich: -5C bis +60C bzw.-25C bis +60C fr Ausfhrungen in grau
Fittings forPVC Conduitstemperature rating: -5C to +60C resp.-25C to +60C for versions in grey
SMEN 50086
couplerSteckmuffe
16 100 1200 064551 027650 02060820 100 800 064552 027651 02060925 50 600 064553 027652 02061032 25 300 064554 027653 02061140 25 200 064555 027654 02061250 15 120 064556 027655 02061363 8 64 064557 027656 020614
HMEN 50086
coupler, clamp typefrom soft PE, for use in concrete
Haftmuffeaus PE-weich, fr Betonverlegung
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
Konditionsgruppe category 5
Konditionsgruppe category 9
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: hellgrau grau orangedim. packing: small/pcs. large/pcs. art.no.: light grey grey orange
Konditionsgruppe category 8
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: hellgrau grau schwarzdim. packing: small/pcs. large/pcs. art.no.: light grey grey black
Konditionsgruppe category 8
7Elektrorohre und Zubehr Conduits and Fittings PVC
Rohreconduits
PVC
16 100 3200 020578 02057120 100 2400 020579 02057225 100 1600 020580 02057332 100 800 020581 02057440 50 400 020582 02057550 50 400 020583 02057663 25 200 020584 020577
16 100 4000 020638 020585 00890520 100 3200 020639 020586 00890625 100 2400 020640 020587 00890732 100 1600 020641 020588 00890840 50 800 020642 02058950 50 600 020643 02059063 25 300 020591 020591
16 50 600 020622 020615 00888420 25 300 020623 020616 00888525 20 160 020624 020617 00888632 1 50 020625 020618 00888740 1 35 020626 02061950 1 20 020627 02062063 1 8 065499 020621
SB normal bend 90slip typeSteckbogen 90gesicktEN 50086
S saddlefor mounting with screws 4mmSchellezur Montage fr Schrauben mit 4mm
CL clipalignablefor mounting with screws 5mm
Klemmschelleanreihbar,zur Montage fr Schrauben mit 5mmEN 50086
40 250 8000 023074 02307150 200 6400 023075 02307263 150 4800 023076 023073
16 100 1000 02089520 100 1000 02089625 50 500 02089732 25 200 02089840 25 200 02089950 25 200 02090063 25 150 020901
CLB bracketHaltebgel
VK end capVerschlusskappe
HSK II/20 fixing stripsee tools and mounting materialHohlschienesiehe Werkzeuge und Montagemittel
Konditionsgruppe category 8
Konditionsgruppe category 8
Konditionsgruppe category 8
Konditionsgruppe category 8
Konditionsgruppe category 8
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: hellgrau grau schwarzdim. packing: small/pcs. large/pcs. art.no.: light grey grey black
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: hellgrau graudim. packing: small/pcs. large/pcs. art.no.: light grey grey
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: hellgrau grau schwarzdim. packing: small/pcs. large/pcs. art.no.: light grey grey black
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: hellgrau graudim. packing: small/pcs. large/pcs. art.no.: light grey grey
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.dim. packing: small/pcs. large/pcs. art.no.
8Elektrorohre und Zubehr Conduits and Fittings PVC
UNIVOLT
EUROTUNNEL
im atFr das grte Tunnel-Projekt des Jahrhunderts wurdenexklusiv UNIVOLT-HFT-Rohre verwendet.Nur sie entsprechen den hohen Sicherheitsanforderungen:halogenfrei, flammwidrig und temperaturbestndig.
Das DIETZEL-HFT-Rohr hilft mitein Jahrhundert-projekt zu verwirk-lichen: denEurotunnel zwi-schen Calais undFolkestone.
HFT conduits byDIETZEL in thelargest tunnelproject of thecentury:the Euro Tunnelconnecting Calaisand Folkestone
For the largest tunnel project of the centuryUNIVOLT HFT conduits were used exclusively.They only meet the highest safety standards:halogenfree, flame retardant and temperature resitant.
DIETZEL UNIVOLT
11
Elektrorohre und Zubehr Conduits and Fittings HFT
Rohreconduits
HFT
Starre Rohre und Zubehr HFTBiegsame Rohre und Zubehr HFT
Anschlussverschraubungen
Rigid Conduits and Fittings HFTPliable Conduits and Fittings HFT
Conduit Glands
12
Elektrorohre und Zubehr Conduits and Fittings HFT
Die Temperaturbestndigkeit liegt wesentlich ber derbisher bekannter Kunststoffelektrorohre, wodurch zahlrei-che neue Einsatzgebiete erschlossen werden (Klimatech-nik, Beleuchtung usw.)
Biegen und VermuffenDie hochschmelzende Kunststofflegierung erfordertbesondere Gerte zur Bearbeitung von HFT-Rohren. Es istdaher auf der Baustelle nicht mglich, HFT-Stangenrohreselbst zu biegen oder aufzumuffen.Ein komplettes Sortiment an Steckmuffen und Steckbgenist jedoch lieferbar, wodurch eine rasche und betriebssi-chere Montage gewhrleistet ist.
KlebeverbindungenWasserdichte Rohrverbindungen bei HFT-Stangenrohrenknnen durch Verkleben der Verbindungen mit HFT-Spezialkleber "HVKS 310" hergestellt werden. Die Rohremssen dabei frei von mechanischen Spannungen seinund beweglich (Gleitsitze!) montiert werden, um Ri-bildungen an den Klebestellen durch temperaturbedingteLngennderungen des Rohrsystems zu verhindern. Beidnnwandigen Rohren ist die Klebetechnik zu vermeidenbzw. bedarf es besonders sorgfltiger Verlegung.
Einziehen von Kabel und LeitungenWerden Einziehhilfen bentigt empfehlen wir die Verwen-dung eines von uns geprften Kabel-Gleitmittels. AndereEinziehhilfen (z.B. Vaseline) knnen Ribildung auslsen!PVC-Kabel vermeiden (Weichmacher kann bei erhhtenTemperaturen ausdampfen).
Ablngen von HFT-RohrenHFT-Rohre knnen mit Sge, Kabelmesser oder mit einerSchneidezange abgelngt werden.
Der Einsatz von HFT-Rohren ist berall dort zu empfehlen,wo die Sicherheit und der Schutz von Menschen undAnlagen im Vordergrund stehen sowie besondere Sicher-heitsmanahmen durch: hohe Personenbelegung, hohe Sachwertkonzentrationen hohe Betriebsausfallskosten erforderlich sind.Dies ist in besonderem Ausma der Fall bei: hochtechnisierten Industrieanlagen Kraftwerken und lraffinerien U-Bahnen, Straentunnels und Flughfen, Aufzugsanlagen und Notaggregaten, Krankenhusern, Schulen, Hotels, Warenhusern,
Museen, Theatern und Konferenzzentren Rechenzentren, Telefon- und Sendeanlagen, Kraftfahrzeugen, Lokomotiven, Waggons, Schiffen und
Flugzeugen Belftungssysteme
In vielen Fllen sind starre HFT-Rohre durch ihre beson-deren mechanischen Eigenschaften eine geeigneteAlternative zu vergleichbaren Stahlrohren.
TEMPERATURBESTNDIGKEIT
EINSATZGEBIETE
WICHTIGE HINWEISE FR DIEBEARBEITUNG/VERLEGUNG
Drei Problemkreise treten bei der Beurteilung von Werk-stoffen immer mehr in den Vordergrund:
BrandverhaltenDas Thema Nr.1 im Hoch- und Tiefbau, in Hotels, Thea-tern, Krankenhusern und Brogebuden, aber auch inKraftwerken, U-Bahnen und Flughfen sowie im Woh-nungsbau ist das Brandverhalten der dort eingesetztenWerkstoffe.
BrandfolgeschdenDer Brand selbst ist fast zu einem zweitrangigen Problemgeworden. Es sind die Nebenerscheinungen von Brnden,die das Problem darstellen.In Statistiken wird schlssig nachgewiesen, da diewenigsten Menschen durch Hitze oder Flammen gesch-digt werden. Die meisten Verletzungen und Todesfllewerden durch das Einatmen tzender und toxischerRauchgase verursacht.
Umweltfreundliche TechnologieDie von uns fr die Herstellung halogenfreier Installations-systeme eingesetzten Kunststoffe enthalten kein Chlorund keine Schwermetalleund bieten daher folgende entscheidende Vorteile gegen-ber konventionellen Systemen:- keine Bildung von korrosiven und surehltigen Gasenim Brandfall, dadurch keine Brandfolgeschden anelektronischen Gerten, Maschinen und Bauwerken- wesentlich geringere Toxizitt und keine tzendenRauchgase, die Menschen und Tiere gefhrden- Verringerung der Rauchdichte und damit Verbesserungder Sicht auf Fluchtwegen und bei Rettungseinstzen- keine Umwelt- und Entsorgungsprobleme, denn auchhalogenfreie Materialien knnen mehrfach wieder-verarbeitet bzw. recycliert, gefahr- und problemlos inMllverbrennungsanlagen verbrannt oder in Mlldeponienabgelagert werden.
WARUM HALOGENFREIEWERKSTOFFE IN DERELEKTROINSTALLATION?
HFT HALOGENFREI - FLAMMWIDRIG - TEMPERATURBESTNDIG
Chemische Bestndigkeit:HFT-Rohre verfgen ber eine gute Chemikalien-bestndigkeit, doch knnen einige Stoffe wie Schmierle,Kraftstoffe, Speisefette und Hydraulikle einzelne Rohrtypenangreifen. Beachten Sie daher bei der Rohrauswahl das"Merkblatt zur chemischen Bestndigkeit".
13
Elektrorohre und Zubehr Conduits and Fittings HFT
Rohreconduits
HFT
HFT HALOGENFREE - FLAME RETARDANT - TEMPERATURE RESISTANT
The high temperature resistance markedly improves theoperational reliability of electrical systems thus opening awide range of application possibilities (air samplingsystems, lighting, ...)
Bending of HFT-conduitBecause of the high temperature resistant plastic alloy ofHFT-conduits it is not possible to bend the HFT-rigidconduits when being installed by using steel bendingsprings. It is, therefore, required to use special devices forbending HFT-conduitsWe supply a complete range of bends and couplers whichguarantee a quick and safe installation.
Connecting of HFT-conduitWatertight connections can be made with HFT-rigidconduits by using our special HFT-sealing-cement"HVKS310". It has to be noted that conduits have to beinstalled free from mechanical stresses and flexible. Thuscracks at the bonded areas can be avoided in case theconduit system is expanding or contracting due totemperature changes. Especially in case of conduits withthin walls t is recommended not to use the cement or onlywhen mounted very carefully.
Drawing-in of cables and wiresIn case drawing-in aids are required, we recommend theuse of cable-lubricant (Polywater GL35) tested by us. Otheraids (like vaseline) can cause cracks. Avoid PVC-cables,as softening agents in the material can evaporate at highertemperatures.
Cutting of HFT-ConduitHFT-conduits can be cut by means of a saw, carpet kniorwith our UNIVOLT cutter USZ-S
The unique properties of UNIVOLT Halogenfree PlasticSystems make them ideally suited for installation in a widevariety of situations especially in cases where safety is animportant issue: high concentration of people high concentration of assets risk of high costs due to plant interruptionThis applies to a high degree in : high-tech industrial plants hospitals, schools, hotels, museums, theatres, shopping
and conference centres computer & telecommunication installations tunnels, airports and subway systems power plants & oil refineries robotic systems lifts and emergency plants ships, aircraft, trains & automotive industries air sampling systems
In many cases the considerable mechanical strength ofthe rigid conduit makes them a viable and practicalalternative to steel equivalents.
TEMPERATURE RESISTANCE
FIELD OF APPLICATIONS
IMPORTANT HINTS FORHANDLING & INSTALLATION
Three main concerns have become increasingly importantin evaluating materials:
Fire BehaviourIn buildings, public works construction, hotels, theatres,hospitals, offices and also in power plants, subwaysystems, airports and residential housing, fire behaviourshould be given most consideration when choosing thecorrect materials.
Damages as a Consequence of FireThe fire itself has nearly become a secondary problem.The side effects of fires are the more pressing areas ofconcern.Statistics show conclusively that human beings are seldomharmed by heat or flames. Most accidents and deaths arethe result of the inhalation of corrosive and toxic fumes.
Waste Management and Environmental IssuesOur plastic for use in the production of halogen-freeelectrical installation systems contain no chlorine and noheavy metals and thus offer the following decisiveadvantages over conventional systems:- No corrosive and acidic gas formation in fire situations,and giving no secondary damage to electronic equipment,machines and buildings.- No aggressive fumes which endanger the lives ofhumans and animals.- Reduced smoke density, giving better visibility at fireexits and for rescue teams.- No environmental and waste disposal problems,because halogenfree materials can be re-used andrecycled repeatedly, as well as deposited or incineratedwithout danger to the environment.
Chemical Resistance:HFT-Conduits are highly resistant against chemical attack,however, some chemical agents like oils, fats, greases andfuel are capable to cause stress-cracking. Therefore,please observe the memorandum on ChemicalResistance for selecting the correct conduits.
WHY USE HALOGENFREEMATERIALS FOR ELECTRICALINSTALLATIONS?
Vergleich der TemperaturbestndigkeitComparison of Temperature Resistance
-45 -20 0 20 40 60 90 105 120 150
Schutzschlucheprotective hoses
PVC
HFT
HFT
Rohreconduits
Rohreconduits
14
Elektrorohre und Zubehr Conduits and Fittings HFT
Gemeinsam mit PVC-freien Kabeln und Leitungen istes mglich, die gesamte Elektroinstallation PVC-freiauszufhren. Dies wird speziell in Bereichen mithoher Personenkonzentration (wie in ffentlichenGebuden, Gro- Wohnanlagen, Verkehrsein-richtungen, Flughfen, U-Bahnen, Krankenanstalten,Theatern, Schulen, Diskotheken usw.) sowie in Anla-gen mit elektronischen Steuerungen (wie in Kraftwer-ken, Aufzugsanlagen, EDV-Anlagen) zur Standardaus-rstung gehren, will man knftig Brandfolgeschdenvermeiden, deren Kosten die Mehrkosten der PVC-freien Installationstechnik bei weitem bersteigen.
Elektrorohre (Druckfestigkeit) PVC-Ausfhrung Halogenfreie AusfhrungElectrical Conduits (compr. strength) PVC versions Halogenfree versions
class. acc. EN item code class. acc. EN item codeStarre Rohre rigid conduitslight gauge (= 320N) 2221 VRM - light grey 2243 HFIR - greymedium gauge (= 750N) 3321 UPRM - grey 3343 HFPR - lgrey, blackheavy gauge (= 1250N) 4421 BSSH - black 4442 HFBS - black
Biegsame Rohre pliable conduitslight gauge (= 320N) 2221 FX - light grey 2243 HFX - greymedium gauge (= 750N) 3341 FXP - grey 3355 HFXP - blackfor concrete (= 750N) 3321 FXPM - grey 3343 HFXA - blackheavy gauge (= 1250N) 4421 FXPS - black
Dosen boxes classification item code classification item codeUnder plaster boxes, surface box U,A AKG, PKG U, A ASD, AK, PKGHDry lining boxes H HWD, HWAD H (chlorine free) HWD, HWADConcrete boxes B SD,... B SD, GDG
DIETZEL-UNIVOLTElektrorohrsystme, Zubehr und Dosen Electrical Conduit Systems, Fittings and Boxes
Folgenschwere Brnde in ffentlichen Gebuden, Bahnan-lagen, aber auch in Hotels, Wohnanlagen und Kranken-husern geben Veranlassung, auf die Bedeutung der PVC-freien Elektroinstallationstechnik hinzuweisen und alle Be-hrden, Vorschriftenstellen, Planungsbros, Fachhandelund Elektroinstallationsfirmen mit unserer langjhrigenErfahrung bei ber tausend Groprojekten mit PVC-freienInstallationssystemen vertraut zu machen.
Mit der nachstehend angefhrten Tabelle mchten wir Ihnenden Umstieg auf die halogenfreie Elektroinstallations-technik erleichtern.
Several major fires in public buildings, railway stations aswell as in hotels, residential buildings and hospitalsdemonstrated the importance of halogenfree installationsystems recently and give reason to make authorities,standardisation bodies, planning consultants and architects,specialised retailing and installation companies familiar withour long experience in halogenfree installation systems inmore than thousand larger projects.
The following table shall support you in finding the rightreplacements for PVC systems for switching to halogenfreeinstallation systems.
In combination with halogenfree cables and lines it ispossible to execute a complete electrical installationsystem without any PVC. This is of particular interestin areas with a high concentration of people (e.g.public buildings, residential areas, airports and trafficjunctions, hospitals, schools and entertainmentcentres ...) as well as in plants with electronic controlsystems (e.g. power plants, lifts, computer centres)where it has become already a standard, keeping inmind that the costs resulting from consequential firedamages exceede the higher cost for halogenfreecabling systems by far.
+ bestndig resistant unbestndig not resistant~ bedingt bestndig partially resistant
Chemischer Chemical HFX HFXP HFIR HFXSAngriff Attack HFXA HFPR
HFBSHFKR
Ammoniak ammonia + ~ +Benzin petrol ~ +Diesell diesel oil + ~ +Essigsure acetic acid + + ~ ~Kalilauge pot. sodium lye + ~ +Kohlensure carbonic acid + + ~ +Methylalkohol methyl alcohol + + +Mineralle mineral oils + ~ ~ +le und Fette oils and fats + +Salpetersure nitric acid + Salzlsungen salt solution + + + +Salzsure hydrochloric acid + ~ Schwefelsure sulfuric acid + ~ + Gips, Mrtel gypsum, mortar + + +Zement, Beton cement,concrete + + +
15
Elektrorohre und Zubehr Conduits and Fittings HFT
Rohreconduits
HFT
16 11,40 50 2700 01955220 14,60 50 2700 01955325 18,50 50 1600 01955432 25,70 25 675 01955540 33,10 25 500 01955650 42,10 25 300 01955763 54,10 25 175 019896
16 1,00 14,00 111 06495320 1,10 17,80 111 06495425 1,20 22,60 57 06495532 1,30 29,40 57 06495640 1,50 37,00 21 06495750 1,80 46,40 21 064958
Starre und biegsameHFT-Isolierrohreleichte Ausfhrung
HFIR
Rigid and PliableHFT-Conduitslight gauge
rigid conduitin lengths of 3m, plain ends
starres Rohrin Stangen zu 3m, ungemufftEN 50086-2-1
colour: grey (RAL 7037)compression strength: > 320 Nclassification: EN 2242-HFtemperature rating: -25C to +90C
upon request: white (RAL 9010)
Farbe: Grau (RAL 7037)Druckfestigkeit: > 320 NKennzeichen: EN 2242-HFEinsatzbereich: -25C bis +90C
auf Anfrage: Wei (RAL 9010)
320 N
HFXEN 50086-2-2
pliable conduit, chlorinefreein coils of 50m resp. 25m
biegsames Rohr, chlorfreiin Ringen zu 50m bzw. 25m
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
Konditionsgruppe category 11
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
Konditionsgruppe category 11
16
Elektrorohre und Zubehr Conduits and Fittings HFT
16 11,70 50 2700 01130120 14,70 50 2700 01130225 18,60 50 1600 01130332 25,70 25 675 01130440 33,50 25 500 01325450 42,80 25 300 01325563 54,80 25 175 019897
16 1,20 13,60 111 06418820 1,30 17,40 111 06418925 1,50 22,00 57 06419032 1,70 28,60 57 06419140 1,80 36,40 21 06419250 2,30 45,40 21 06419363 2,50 58,00 21 064194
Starre und biegsamePVC-Panzerrohremittlere Ausfhrung
HFPR
Rigid and PliablePVC Conduitsmedium gauge
rigid conduitcolour: grey (RAL 7037)in lengths of 3m, socketed on one endclassification: EN 3342-HFtemperature rating: -25C to +90C
starres RohrFarbe: Grau (RAL 7037)in Stangen zu 3m, einseitig aufgemufftKennzeichen: EN 3342-HFEinsatzbereich: -25C bis +90C
EN 50086-2-1
compression strength: > 750 NDruckfestigkeit: > 750 N
750 N
HFXPEN 50086-2-2
pliable conduitcolour: black (RAL 9005)in coils of 50m resp. 25mclassification: EN 3355-HFtemperature rating: -45C to +150C
biegsames RohrFarbe: Schwarz (RAL 9005)in Ringen zu 50m bzw. 25mKennzeichen: EN 3355-HFEinsatzbereich: -45C bis +150C
HFXASEN 50086-2-2
pliable conduit, chlorinefreecolour: reddish brownin coils of 50m resp. 25mclassification: EN 3343-HFtemperature rating: -25C to +105C
biegsames Rohr, chlorfreiFarbe: Rotbraunin Ringen zu 50m bzw. 25mKennzeichen: EN 3343-HFEinsatzbereich: -25C bis +105C
16 11,4 50 2500 06547720 14,6 50 1800 03737625 18,5 50 1600 03737732 25,7 25 1000 065478
20 14,10 50 2700 04194425 18,30 50 1600 04194732 24,30 25 675 04194840 30,00 25 500 05693750 38,50 25 300 056939
HFXAEN 50086-2-2
pliable conduitcolour: black (RAL 9005)in coils of 50m resp. 25mclassification: EN 3343-HFtemperature rating: -25C to +105C
biegsames RohrFarbe: Schwarz (RAL 9005)in Ringen zu 50m bzw. 25mKennzeichen: EN 3343-HFEinsatzbereich: -25C bis +105C
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
Konditionsgruppe category 11
Konditionsgruppe category 11
Konditionsgruppe category 11
Konditionsgruppe category 9
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
Dim. innen Verpackung: m/Ring m/Palette Art.Nr.dim. inner packing: m/coil m/pallet art.no.
17
Elektrorohre und Zubehr Conduits and Fittings HFT
Rohreconduits
HFT
16 1,50 13,00 111 06496620 1,60 16,80 111 06496725 1,80 21,40 57 06496832 1,90 28,20 57 06496940 2,30 35,40 21 06497050 2,60 45,00 21 064971
16 100 1200 12 020655 02055620 100 800 12 020656 02055725 50 600 12 020657 02055832 25 300 12 020658 02055940 25 200 12 020659 02065250 15 120 12 020660 02065363 8 64 12 020661 020654
StarreHFT-Panzerrohreschwere Ausfhrung
HFBS
RigidHFT Conduitsheavy gauge
rigid conduitin lengths of 3m, plain ends
starres Rohrin Stangen zu 3m, ungemufftEN 50086-2-1
colour: black (RAL 9005)compression strength: > 1250 Nclassification: EN 4442-HFtemperature rating: -25C to +90C
Farbe: Schwarz (RAL 9005)Druckfestigkeit: > 1250 NKennzeichen: EN 4442-HFEinsatzbereich: -25C bis +90C
1250 N
Zubehhr frHFT-ElektrorohreEinsatzbereich: -25C bis +90C
Fittings forHFT Conduitstemperature rating: -25C to +90C
HFSMEN 50086
couplerSteckmuffe
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
Konditionsgruppe category 11
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: grau schwarzdim. packing: small/pcs. large/pcs. art.no.: grey black
Konditionsgruppe category 12
16 100 1200 064551 027650 02060820 100 800 064552 027651 02060925 50 600 064553 027652 02061032 25 300 064554 027653 02061140 25 200 064555 027654 02061250 15 120 064556 027655 02061363 8 64 064557 027656 020614
HMEN 50086
coupler, clamp typefrom soft PE, for use in concrete
Haftmuffeaus PE-weich, fr Betonverlegung
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: hellgrau grau orangedim. packing: small/pcs. large/pcs. art.no.: light grey grey orange
Konditionsgruppe category 8
18
Elektrorohre und Zubehr Conduits and Fittings HFT
HFSB Steckbogen 90gesicktEN 50086
HFS
HFCLEN 50086
HFCLB
VK
HSKH II/20
Konditionsgruppe category 12
Konditionsgruppe category 12
Konditionsgruppe category 12
Konditionsgruppe category 12
Konditionsgruppe category 8
16 100 3200 020805 02083220 100 2400 020806 02083325 100 1600 020807 02083432 100 800 020808 02083540 50 400 020809 02083650 50 400 020810 02083763 25 200 021172 020838
16 100 4000 019546 00963420 100 3200 019547 00963525 100 2400 019548 00963632 100 1600 019549 00963740 50 800 019550 00963850 50 600 019551 00963363 25 300 021168
16 50 600 020799 02082520 25 300 020800 02082625 20 160 020801 02082732 1 50 020802 02082840 1 35 020803 02082950 1 20 020804 02083063 1 8 027261
normal bend 90slip type
saddlefor mounting with screws 4mm
Schellezur Montage fr Schrauben mit 4mm
clipalignablefor mounting with screws 5mm
Klemmschelleanreihbar,zur Montage fr Schrauben mit 5mm
40 250 8000 023077 02308050 200 6400 023078 02308163 150 4800 023082
bracketHaltebgel
end capVerschlusskappe
fixing stripsee tools and mounting material
Hohlschienesiehe Werkzeuge und Montagemittel
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: grau schwarzdim. packing: small/pcs. large/pcs. art.no.: grey black
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: grau schwarzdim. packing: small/pcs. large/pcs. art.no.: grey black
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: grau schwarzdim. packing: small/pcs. large/pcs. art.no.: grey black
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.: grau schwarzdim. packing: small/pcs. large/pcs. art.no.: grey black
Dim. Verpackung: klein/Stk. gro/Stk. Art.Nr.dim. packing: small/pcs. large/pcs. art.no.16 100 1000 02089520 100 1000 02089625 50 500 02089732 25 200 02089840 25 200 02089950 25 200 02090063 25 150 020901
19
Elektrorohre und Zubehr Conduits and Fittings HFT
Rohreconduits
HFT
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.16/16 100 01275320/20 50 01179025/25 50 01260932/32 30 01275440/40 20 01550750/50 16 01550663/63 8 026933
16/16 20 01275520/20 20 01275625/25 10 01275732/32 10 012758
20 50 02023025 25 01652232 20 01652340 10 01532550 8 01532463 3 026935
16 200 01448520 200 01191825 100 01191932 100 01448640 30 01982350 25 01723663 25 026937
HLNlocknutmetric thread
Gegenmuttermetrisches Gewinde
HFL elbow gland with flangemetric thread
Winkel mit Flanschmetrisches Gewinde
HEG elbow glandmetric thread
Winkelverschraubungmetrisches Gewinde
HGL straight glandmetric thread
gerade Verschraubungmetrisches Gewinde
Anschluss-verschraubungenPatentiertes Verschraubungs-Schnell-kupplungssystem fr biegsame Installations-rohre (speziell fr HFXP und HFXA) mit IEC-Gewinde, zugfest und erhhter Temperatur-bestndigkeit (- 45C bis +150C) aus PPO
ConduitGlandsPatented plug-in system for quick-fit assemblywith pliable electrical conduits (especially withHFXP and HFXA), IEC thread, tensile stressresitant and increased temperature resistance(-45C to +150C) from PPO
colour: black (RAL 9005)temperature rating: -45C to +150Cprotection degree: IP 54
Farbe: Schwarz (RAL 9005)Einsatzbereich: -45C bis +150CSchutzart: IP 54
Verpackungseinheiten: siehe Kabelschutzschluchen unter den Kurzbezeichnungen SGL, SEG, SFL und SLNFor packing quantities please refer to glands for protective hoses under itme codes SGL, SEG, SFL and SLN
Konditionsgruppe category 12
Konditionsgruppe category 12
Konditionsgruppe category 12
Konditionsgruppe category 12
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
35
Dosen Boxes
Dosenboxes
Abzweigdosen, SchalterdosenAbzweigksten, Panzerksten
Hohlwanddosen
Switch and Socket BoxesDistribution and Enclosure Boxes
Dry Lining Boxes
36
Dosen Boxes
ASD 70 100 020912
Putzdeckel, wei, halogenfrei suitable for plaster, white, halogenfreePD 70 100 3200 000832
Tapetendeckel, wei, halogenfrei suitable for wall papers, white, halogenfreesteck- und verschraubbar plug or screw fixingTD 70 50 600 000828
Randdeckel, wei, halogenfrei box rim cover lid, white, halogenfreesteck- und verschraubbar plug or screw fixingRD 70 50 600 000829
UGD 2 136 x 65mm 45mm 50 026466
Auf- undUnterputzdosen
Surface and UnderPlaster Boxestemperature rating: -5C to +60CEinsatzbereich: -5C bis +60C
ASD 70 combined distribution and outlet boxsingle, black, alignabledepth 45mm, 70mm, with coupling system foraligning in standard distance of 71mm andadjustable fixing of outlet devices, standardscrew distance 60mmfor installations under plaster
Kombi-Abzweig-Schalterdoseeinfach, schwarz, anreihbar45mm tief, 70mm mit Kupplungssystem frKombi- Normabstand 71mm und Mehrfach-Befestigungsmglichkeit fr Gerte-Tragring,Schraubennormabstand 60mmzur Verlegung unter Putz
PDTDRD
ASD lidwhite
ASD-Deckelwei
UGD 2 double outlet boxblack, for installation of 2 devices in astandard distance of 71mm,standard screw distance 60mmfor installations under plaster
Zweifach-Gertedoseschwarz, zur Montage von 2 Gerten imNormabstand von 71mm,Schrauben-Normabstand 60mmzur Verlegung unter Putz
Bezeichnung Verpackung Stk. Art.Nr.item code packing pcs. art.no.
Konditionsgruppe category 13
Konditionsgruppe category 13
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.item code dimension depth packing pcs. art.no.
Konditionsgruppe category 13
Bezeichnung Verpackung: klein/Stk. gro/Stk. Art.Nr.item code packing: small/pcs. large/pcs. art.no.
37
Dosen Boxes
Dosenboxes
AKU 80 75 x 75mm 50mm 100 020924AKU 100 100 x 100mm 50mm 100 020925AKU 150 150 x 150mm 70mm 50 020926AKU 200 200 x 200mm 80mm 20 020927
AKG 100 100 x 100mm 45mm 50 000719AKG 150 150 x 150mm 65mm 25 000722AKG 200 200 x 200mm 70mm 12 000724
80 100 020856100 100 000748150 100 000749200 80 000750
80 100 020857100 100 000735150 100 000737200 80 000739
100 100 000743150 100 000744200 80 000741AK-AKGD 200/400 1 000745AK-AKGD 200/600 1 000746400 1 000742
Abzweigksten Distribution Boxestemperature rating: -5C to +60CEinsatzbereich: -5C bis +60C
AKU distribution box bodyblack, pre-punched wall entries, for installationsunder plaster, stackable, knock-out walls forconduit entries, suitable lid versions availablefor plug fixing, box rim cover lids also suitablefor fixing with screws
Abzweigkasten-Unterteilschwarz, vorgeprgte Seitenwnde, zur Verle-gung unter Putz, stapelbar, Rohreinfhrungenleicht ausbrechbar; dazupassend Deckel-varianten zum Stecken, Randdeckel auch frSchraubenbefestigung geeignet
AKG distribution box body with box rim lidwhite, no pre-punched wall entries,for surface or under plaster installations
Abzweigkasten mit Randdeckelwei, geschlossene Seitenwnde,zur Verlegung auf und unter Putz
AKTD lid for wall papers for AKUwhite, plug fixing, suitable for plaster evenand box covers without screws
Tapetendeckel zu AKUwei, steckbar, putzbndige undschraubenlose Kasten-Abdeckung
AKRD box rim cover lid for AKUwhite, plug or screw fixing
Randdeckel zu AKUwei, Steck- oder Schraubbefestigung
AKGD box rim cover lid for AKGwhiteRanddeckel zu AKGwei
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.item code dimension depth packing pcs. art.no.
Konditionsgruppe category 13
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.item code dimension depth packing pcs. art.no.
Konditionsgruppe category 13
Konditionsgruppe category 13
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Konditionsgruppe category 13
Konditionsgruppe category 13
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
38
Dosen Boxes
100 100 000821150 50 000822200 50 000823
DS 100 000835PLS 100 000836
VUK 1 100 x 100mm 40mm 60 000818
AK 200/400 200 x 400mm 70mm 5 020921AK 200/600 200 x 600mm 70mm 1 020922AK 400 400 x 400mm 70mm 1 020923
AKTW insulating separators for AK 100-200for division of circuitsIsolier-Trennwnde fr AK 100-200zum Trennen von Stromkreisen
AK distribution box multi-gangpre-punshed wall entries, for installationunder plaster with box rim cover lid
Abzweigkasten Grokastenserievorgeprgte Seitenwnde, zur Verlegungunter Putz mit Rand-Deckel
AKG distribution box multi-gangno pre-punshed wall entries, for installationon surface or in cavity ceilings
Abzweigkasten Grokastenseriegeschlossene Seitenwnde, zur Verlegungauf Putz oder in Hohldecken
VUK 1 multi-purpose boxlight greywith slide lid for surface installation
Universalkastenhellgraumit Schiebedeckel fr Aufputzmontage
AKDSAKPLS
lid screws self-cutting2,9mm; length 13mm
Deckelschrauben selbstschneidend2,9mm; Lnge 13mm
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Konditionsgruppe category 13
Konditionsgruppe category 13
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Konditionsgruppe category 13
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.item code dimension depth packing pcs. art.no.
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.item code dimension depth packing pcs. art.no.
Konditionsgruppe category 13
AKG 200/400 200 x 400mm 70mm 5 000727AKG 200/600 200 x 600mm 70mm 1 000728AKG 400 400 x 400mm 70mm 1 000726
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.item code dimension depth packing pcs. art.no.
Konditionsgruppe category 13
39
Dosen Boxes
Dosenboxes
PanzerkastenMaterial: HFTFarbe: Hellgrau (RAL 7035), Grau (RAL 7037) Schwarz (RAL 9005) Wei (RAL 9010)Einsatzbereich: -25C bis +105C bzw.-45C bis +150C fr Ausfhrungen in schwarz
Rohrgre conduit size 16-20W1H 25mm 100 3200 020811 020839Rohrgre conduit size 16-25W2H 32mm 50 1200 020812 020840Rohrgre conduit size 16-40W3H 50mm 50 800 020813 020841
mit (MP) oder ohne (OP) Vorprgung with (MP) or without (OP) pre-punshed entriesPKG 100 OP 105 x 105mm 64mm 1 000849 000847PKG 100 MP 105 x 105mm 64mm 1 016403 020752mit (MP) oder ohne (OP) Vorprgung with (MP) or without (OP) pre-punshed entriesPKG 200 OP 200 x 150mm 85mm 1 012047 012046PKG 200 MP 200 x 150mm 85mm 1 012048 020753ohne (OP) Vorprgung without (OP) pre-punshed entriesPKG 300 OP 300 x 200mm 125mm 1 013003 012998mit hohem Deckel with raised lidPKG 300 OP/H 300 x 200mm 125mm 1 015234 015385mit transparentem, hohem Deckel with transparent raised lidPKG 300 OP/TH 300 x 200mm 125mm 1 015233 015227
ohne (OP) Vorprgung without (OP) pre-punshed entriesPKGH 100 OP 105 x 105mm 64mm 5 015167 000528PKGH 200 OP 150 x 200mm 85mm 2 015168 010685PKGH 300 OP 200 x 300mm 125mm 1 015169 013019
Panzerksten Enclosure Boxesfor detailed technical descriptionsplease turn to the next page
detaillierte technische Beschreibungenfinden Sie auf der nchsten Seite
PKG enclosure boxmaterial: PVCcolour: light grey (RAL 7035), grey (RAL 7037)temperature rating: -25C to +60C
PanzerkastenMaterial: PVCFarbe: Hellgrau (RAL 7035), Grau (RAL 7037)Einsatzbereich: -25C bis +60C
PKGH enclosure boxmaterial: HFTcolour: light grey (RAL 7035), grey (RAL 7037) black (RAL 9005) white (RAL 9010)temperature rating: -25C to +105C resp.-45C to +150C for versions in black
Anschlunippelhalogenfrei, fr Rohr- undKabeleinfhrung in PKG und PKGHFarbe: Grau (RAL 7037) Schwarz (RAL 9005)
W grommethalogenfree, for conduit andcable entries in PKG and PKGHcolour: grey (RAL 7037) black (RAL 9005)
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.: hellgrau grauitem code dimension depth packing pcs. art.no.: light grey grey
Konditionsgruppe category 13
Bezeichnung Abmessungen Tiefe Verpackung Stk. Art.Nr.: grau schwarzitem code dimension depth packing pcs. art.no.: grey black
Konditionsgruppe category 12
Bezeichnung Durchmesser Verpackung: klein/Stk. gro/Stk. Art.Nr.: grau schwarzitem code diameter packing: small/pcs. large/pcs. art.no.: grey black
Konditionsgruppe category 12
40
Dosen Boxes
Strahlwasserdicht und FR-sicher, Deckel mitSchnellverschlu, auch mittransparentem Deckel lieferbar.PKG mit oder ohne VorprgungPKGH ohne Vorprgung.
Vorprgungen pre-punshed entriesfr Rohr- und Kabeleinfhrungfor conduit and cable entries
IP 65 105 x 105 x 64 mmPKG 100 PKGH 100
PKG 200 PKGH 200IP 65 200 x 150 x 85 mm
Mabilder (Mae in mm) measurements (measures in mm)
PKG 300 PKGH 300IP 65 300 x 200 x 125 mm
PanzerkstenEnclosure BoxesPKGPKGHMae measurements
PKG 100 6 x 25 mmfr Nippel for grommet W 1Rohrgre conduit size 16-20
PKG 200 6 x 25 mmfr Nippel for grommet W 1Rohrgre conduit size 16-20 4 x 32 mmfr Nippel for grommet W 2Rohrgre conduit size 16-25
Strahlwasserdicht und FR-sicher, Deckel mitSchnellverschlu, auch mittransparentem Deckel lieferbar.PKG mit oder ohne VorprgungPKGH ohne Vorprgung.jetting water tight and moisture proof, lidwith bayonet fast lock, also availablewith transparent lid.PKG with or without pre-punshed entriesPKGH without pre-punshed entries
jetting water tight and moisture proof, lidwith bayonet fast lock, also availablewith transparent lid.PKG with or without pre-punshed entriesPKGH without pre-punshed entries
Strahlwasserdicht und FR-sicher, Deckel mitMultikipp-System, (Scharniereffekt nachallen Seiten) Schnellverschlu, Deckel auchals transparente und hohe Ausfhrunglieferbar, ohne Vorprgungjetting water tight and moisture proof, lidwith Multikipp system (can be hinged to allsides), bayonet fast lock, lid also availableas transparent and raised versionwithout pre-punshed entries
41
Dosen Boxes
Dosenboxes
Winkeldose
Circular BoxesAbzweigdosen
CB
through boxDurchgangsdose
PVC versioncircular box without lidwith brass inserts for screwscolours: grey, black, (white upon request)temperature rating: -25C bis +60C
Version with lid, without brass inserts:CBD (upon request)
PVC VersionAbzweigdose ohne Deckelmit Schraubeinstzen aus MessingFarben: Grau, Schwarz, (Wei auf Anfrage)Einsatzbereich: -25C bis +60C
Version mit Deckel, ohne Messingeinstze:CBD (auf Anfrage)
T-Dose
HFT versioncircular box without lidwith brass inserts for screwscolours: grey, black, (white upon request)temperature rating: -25C bis +105C resp.-25C to +90C for versions in black
Version with lid, without brass inserts:CBDH (upon request)
HFT VersionAbzweigdose ohne Deckelmit Schraubeinstzen aus MessingFarben: Grau, Schwarz, (Wei auf Anfrage)Einsatzbereich: -25C bis +105C bzw.-25C bis +90C fr Ausfhrungen in schwarz
Version mit Deckel, ohne Messingeinstze:CBDH (auf Anfrage)
circular lidDosendeckel
CB 16/2 010027 008938CB 20/2 010029 008940CB 25/2 010031 008942CB 32/2 008944
angle box
tee box
intersection boxKreuzdose
Konditionsgruppe category 84
HFCBKonditionsgruppe category 96
CBDKonditionsgruppe category 13
CBDHKonditionsgruppe category 12
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
HFCB 16/2 009649HFCB 20/2 034311 009650HFCB 25/2 034380 009651HFCB 32/2 009652
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
25/20025/20025/20010/80
CB 16/A 010013 008924CB 20/A 010015 008926CB 25/A 008928CB 32/A 008930
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
HFCB 16/A 009653HFCB 20/A 034314 009654HFCB 25/A 034383 009655HFCB 32/A 009656
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
20/16020/16020/1608/64
CB 16/3 010034 008945CB 20/3 008947CB 25/3 010038 008949CB 32/3 008951
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
HFCB 16/3 009657HFCB 20/3 034312 009658HFCB 25/3 034381 009659HFCB 32/3 009660
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
20/16020/16020/1608/64
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
CB 16/4 010041 008952CB 20/4 010043 008954CB 25/4 010045 008956CB 32/4 008958
HFCB 16/4 009661HFCB 20/4 034313 009662HFCB 25/4 034382 009663HFCB 32/4 009664
20/16020/16020/1608/64
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
CBL 16-25 022189 008980CBL 32 022190 008981
HFCBL 16-25 027115 009665HFCBL 32 022575 009666
100/2400100/1200
42
Dosen Boxes
FittingsFormteile
IBHFIB
inspection bendBogenstck
PVC versioncircular box with lidcolours: light grey, black
(grey, white upon request)temperature rating: -25C bis +60C
PVC VersionFormteile mit aufgeschraubtem DeckelFarben: Hellgrau, Schwarz
(Grau, Wei auf Anfrage)Einsatzbereich: -25C bis +60C
HFT versioncircular box with inspection lidcolours: grey, black, (white upon request)temperature rating: -25C bis +105C resp.-25C to +90C for versions in black
HFT VersionFormteile mit aufgeschraubtem DeckelFarben: Grau, Schwarz, (Wei auf Anfrage)Einsatzbereich: -25C bis +105C bzw.-25C bis +90C fr Ausfhrungen in Schwarz
inspection elbowWinkelstck
inspection teeT-StckITHFIT
IEHFIE
AFTHFAFT
conduit adaptorRohranschluss
mit Innengewinde with female thread
Konditionsgruppe category 12
Konditionsgruppe category 13
Bezeichnung Art.Nr.: hellgrau schwarzitem code art.no.: light grey black
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
IB 20 009982 009095IB 25 009983 009096
HFIB 20 026962 009643HFIB 25 026963 009644
50/40020/240
Bezeichnung Art.Nr.: hellgrau schwarzitem code art.no.: light grey black
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
IE 20 021477 016901IE 25 016902
HFIE 20 026966 026968HFIE 25 026967 026969
50/40020/240
Bezeichnung Art.Nr.: hellgrau schwarzitem code art.no.: light grey black
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
IT 20 009979 009092IT 25 009980 009093
HFIT 20 026016 009640HFIT 25 026973 009641
50/40020/240
Bezeichnung Art.Nr.: hellgrau schwarzitem code art.no.: light grey black
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
AFT/MBS 16 020754AFT/MBS 20 020755 009086AFT/MBS 25 020756 009087AFT/MBS 32 020757 009088AFT/MBS 40 020758 009089AFT/MBS 50 020759 009090
HFAFT/MBS 16 020814 009673HFAFT/MBS 20 020815 009674HFAFT/MBS 25 020816 009675HFAFT/MBS 32 020817 009676HFAFT/MBS 40 020818 009677HFAFT/MBS 50 020819 009678
100/2400100/120050/60020/48025/30010/120
AMTHFAMT
mit Auengewinde und Gewindering with male thread and lock ringAMT/LR 20 009574 009548AMT/LR 25 009575 009049
HFAMT/LR 20 020821 009680HFAMT/LR 25 020822 009681
100/120050/600
mit Auengewinde und Sechskantmutter with male thread and lock nutAMT/LN 20 009579 009553AMT/LN 25 009580
HFAMT/LN 20 020823 020843HFAMT/LN 25 020824 020844
100/120050/600
conduit adaptorRohranschlussBezeichnung Art.Nr.: hellgrau schwarzitem code art.no.: light grey black
Bezeichnung Art.Nr.: grau schwarzitem code art.no.: grey black
Verpackung Stk.: klein/gropacking pcs.: small/large
43
Dosen Boxes
Dosenboxes
Die Hohlwand-Installationstechnik Dry Lining Installation
Einbauffnung mitSpezialfrser herstellensetting build in bore holeswith milling cutter
FX-Rohr aus Frslochfhrenadjusting FX-conduits to thebore hole
Dose mit FX-Rohr inFrsloch einsetzeninserting box and conduitinto the bore hole
Durch speziell geformte Rohreinfhrungen kn-nen die eingesetzten FX-Rohre in einem Winkelbis 90 geschwenkt und daher auch parallel zurWand gefhrt werden.
Trennwand partition walls Dachausbau interior roof work Paneelverkleidung panel walls
Hohlwanddosen Dry Lining Boxes
The especially shaped conduit entries allowconnections to pliable conduits in various anglesup to 90, thus the conduit even being installedparallely to the cavity wall.
Finish: The Locking Device gives a tight and secure fixing for the box. Fast and efficient fixing of the complete installation system. Suitable for partition board thicknesses between 7mm to 35mm. Conduit entries in variable angles possible due to the special shape of the wall/bottom knock-outs. The box can be removed from the wall to accommodate additional cables and be replaced easily. Soft material, no fractures of the boxes during installation
The UNIVOLT Dry Lining Box: designed to allow fast easy fixing into cavity partition walls.
Einbau: Fester und sicherer Sitz der Dose in der Wand mittels Metalllaschen. Schnelle und effiziente Montage des gesamten Installationssystems. Geeignet fr Wandstrken zwischen 7mm und 35mm. Variable Rohreinfhrung durch spezielle Formung der Wand-/Bodenausbrche. Leichte Herausnahme und Wiederinstallation der Dosen bei notwendigen nderungen der Installationen. Der elastische Werkstoff verhindert Brche der Dosen beim Installieren
UNIVOLT Hohlwanddosen: schnelle und leichte Handhabung bei Hohlwandkonstruktionen
44
Dosen Boxes
HWD 65 65mm 45mm 25 200 021196HWAD 65 65mm 60mm 10 150 021197HWDS 65 65mm 40mm 25 200 026982HWAD 120 120mm 65mm 10 80 064609
Hohlwanddosen Dry Lining Boxeseasy fixing distribution and outlet boxes fromchlorinefree and flame retardant plastic (PP), forelectrical installations in cavity partition walls.Integrated fixing screws with pivoted lockingdevices for tight and secure fixing.
montagefreundliche Dosen und Ksten auschlorfreiem, flammwidrigem Kunststoff (PP),fr Hohlwand-Elektroinstallationen.Befestigung durch integrierte Schrauben mitschwenkbaren Riegellaschen.
colour: orangetemperature rating: -25C to +75C
Farbe: OrangeEinsatzbereich: -25C bis +75C
HWDHWADHWDS
outlet box one gangscrew distance 60mm, required build in borehole 68mm, external box front flange 71mm, for cavity walls 7-35mm, 4 conduitentries in dimension 20mm, 2 cable entries.
Gertedose einfachSchraubenabstand 60mm, erforderliche Ein-bauffnung 68mm, uerer Dosenrand 71mm, fr Plattenstrke 7-35mm, 4 Rohrein-fhrungen 20mm, 2 Kabeleinfhrungen.
HWLS milling cuttercomplete tool including drill and compass sawLochfrsekomplett inklusive Bohrer und Lochsge
Bezeichnung Durchmesser Tiefe Verpackung: klein/Stk. gro/Stk. Art.Nr.item code diameter depth packing: small/pcs. large/pcs. art.no.
Konditionsgruppe category 17
RD 65 Randdeckel box rim cover lid 100 1600 001163TD 65 Tapetendeckel for wall papers 100 3200 001162RD 120 Randdeckel box rim cover lid 80 640 064612TD 120 Tapetendeckel for wall papers 80 2560 064611
HWDZ outlet box twin gangscrew distance 60mm, for installation of 2devices in standard distance of 71mm, for cavitywalls 7-35mm, required build in bore hole 2 x 68mm, 5 conduit entries in dimension 20mm
Gertedose zweifachSchraubenabstand 60mm, zur Montage von2 Gerten im Normabstand von 71mm, frPlattenstrke 7-35mm, Einbauffnung2 x 68mm, 5 Rohreinfhrungen 20mm
HWD RDHWD TD
box lidwhite, screw fixingfor boxes with 65 or 120mm
Deckelwei, Schraubbefestigungfr Dosen mit 65 oder 120mm
HWAK distribution boxincluding lid and screwsfor cavity walls 7-35mm, required build in borehole 4 x 35mm, 8 conduit entries 20mm,with wall slots for use of separators.
Abzweigkasteninklusive Deckel und Schraubenfr Plattenstrke 7-35mm, Einbauffnung4 x 35mm, 8 Rohreinfhrungen 20mm,mit Fhrungsnuten fr Trennwandeinsatz.
Konditionsgruppe category 17 HWDZ 136x65mm 45mm 10 100 021198
Bezeichnung Abmessungen Tiefe Verpackung: klein/Stk. gro/Stk. Art.Nr.item code dimension depth packing: small/pcs. large/pcs. art.no.
Bezeichnung Beschreibung Verpackung: klein/Stk. gro/Stk. Art.Nr.item code description packing: small/pcs. large/pcs. art.no.
Konditionsgruppe category 17
Bezeichnung Abmessungen Tiefe Verpackung: klein/Stk. gro/Stk. Art.Nr.item code dimension depth packing: small/pcs. large/pcs. art.no.HWAK 100 107x107mm 52mm 10 80 021199HWAK 100 Deckel lid (PVC) 10 80 001191Konditionsgruppe category 17
Bezeichnung Beschreibung Verpackung Stk. Art.Nr.item code description packing pcs. art.no.HWLS 65/30 Lochfrse milling cutter 1 011849HWLS 65/30 EM Ersatzmesser replacement saw 1 013651HWLS 65/30 B Ersatzbohrer replacement drill 1 011940BMF 120/40 Bimetallfrser bimetal cutter 1 064289
85
Kabelschutzschluche Protective Hoses
Schutzschlucheprotective hoses
KabelschutzschlucheSchlauchverschraubungen
Protective HosesConduit Glands
86
Kabelschutzschluche Protective Hoses
art.no.dim. cat. packing pcs. grey black12 54 200 018776 06113716 54 200 014206 02625720 54 200 013277 02625625 54 100 013278 02625532 54 100 013279 02625440 54 25 015916 02625350 54 25 017307 02605463 54 25 027589 027590
da/mm di/mm cat. packing m art.no.m/coil grey black
13 9,4 54 50 015902 02365416 11,6 54 50 012903 02365520 14,6 54 50 012904 02365625 18,7 54 50 012905 02365732 25,6 54 25 012906 02365840 33,1 54 25 012907 02365950 42,7 54 25 012908 02366063 54,6 54 25 025054 023661
nominal dim. cat. packing pcs. art.nosmall/large grey black
IP 541212 54 100/3200 016440 0277971616 54 100/2400 012699 0277982020 54 50/1200 012700 0277992525 54 50/600 012701 0278003232 54 30/360 012702 0278014040 54 20/240 015509 0278025050 54 16/128 015508 0278036363 54 6/48 043075 027804IP 651212 S 54 100/3200 023615 0430671616 S 54 100/2400 012707 0430682020 S 54 50/1200 012708 0430692525 S 54 50/600 012709 0430703232 S 54 30/360 012710 0430714040 S 54 20/240 012711 0430735050 S 54 16/128 012712 0430746363 S 54 6/48 012713 043077
320 N
HalogenfreieSchutzschlucheleichte Druckfestigkeitmittlere Schlagfestigkeit
HalogenfreeProtective Hoseslight compression strengthmedium impact strength
HFXSEN 50086-2-3
colour: black (RAL 9005), UV stabilized grey (RAL 7035)compression strength: > 320 Nclassification: EN 2343temperature rating: -25C to +105C
Farbe: Schwarz (RAL 9005), UV-stabilisiert Grau (RAL 7035)Druckfestigkeit: > 320 NKennzeichen: EN 2343Einsatzbereich: -25C bis +105C
flexible protective hosein coils of 50m resp. 25m
flexibler Schutzschlauchin Ringen zu 50m bzw. 25m
SGL straight glandmetric thread
gerade Verschraubungmetrisches Anschlussgewinde
SLN locknutmetric thread
Gegenmuttermetrisches Anschlussgewinde
flexamid
87
Kabelschutzschluche Protective Hoses
Schutzschlucheprotective hoses
nominal dim. cat. packing pcs. art.nosmall/large grey black
IP 541212 54 50/1600 017273 0430661616 54 20/800 012703 0331482020 54 20/640 012704 0331492525 54 10/320 012705 0326613232 54 10/160 012706 032662IP 651212 S 54 50/1600 043065 0611511616 S 54 20/800 012711 0611532020 S 54 20/640 012712 0413852525 S 54 10/320 012713 0611543232 S 54 10/160 012714 061155
nominal dim. cat. packing pcs. art.nosmall/large grey black
IP 5420 54 50/400 020092 04300525 54 25/300 016520 04300632 54 20/160 016521 04300740 54 10/80 015072 04300850 54 8/64 015073 04300963 54 3/24 024182 043010IP 6520 S 54 50/400 043013 04301225 S 54 25/300 019423 04301432 S 54 20/160 019422 04301540 S 54 10/80 015912 04301650 S 54 8/64 015913 04301763 S 54 3/24 043019 043018
nominal dim. cat. packing pcs. art.nosmall/large grey black
16 54 100/4000 043335 04333420 54 100/4000 043337 04333625 54 100/4000 043339 04333832 54 100/4000 043341 04334040 54 100/3200 043343 04334250 54 100/3200 043345 043344
nominal dim. cat. packing pcs. art.nosmall/large grey black
16 54 100/4000 043323 04332220 54 100/3200 043385 04332425 54 100/2400 043327 04332632 54 100/1600 043329 04332840 54 50/800 043331 04333050 54 50/600 043333 043332
SEG elbow glandmetric thread
Winkelverschraubungmetrisches Anschlussgewinde
SFL elbow gland with flangemetric thread
Winkel mit Flanschmetrisches Anschlussgewinde
SCLX clampKlemmschelle
SCLX-CX bracketHaltebgel
88
Kabelschutzschluche Protective Hoses
type G L A D for prot.(PA/PPO) (thread) hose sizeSGL/HGL 1212 M 12 x 1,5 12,1 21 8,0 18,3 21,0 12SGL/HGL 1616 M 16 x 1,5 16,1 25 10,5 18,9 24,7 16SGL/HGL 2020 M 20 x 1,5 20,1 30 12,0 24,0 29,8 20SGL/HGL 2525 M 25 x 1,5 25,1 38 15,0 30,4 37,2 25SGL/HGL 3232 M 32 x 1,5 32,2 45 15,0 32,0 45,0 32SGL/HGL 4040 M 40 x 1,5 40,2 57 15,0 38,0 56,2 40SGL/HGL 5050 M 50 x 1,5 50,2 68 15,0 42,4 68,0 50SGL/HGL 6363 M 63 x 1,5 63,2 82 20,0 54,0 82,0 63
type A D L B M N h d for prot.(PA/PPO) hose sizeSFL/HFL 20 35,9 29,8 65,0 41 33 27 21,0 4,2 20SFL/HFL 25 42,0 37,2 75,9 45 37 30 23,4 4,2 25SFL/HFL 32 50,0 45,0 90,0 56 46 37 27,5 5,2 32SFL/HFL 40 62,0 56,2 110,5 70 58 45 33,9 6,2 40SFL/HFL 50 76,0 68,0 129,3 84 72 55 42,0 6,2 50SFL/HFL 63 96,0 82,0 162,0 98 84 70 55,0 6,2 63
type G L A B D h for prot.(PA/PPO) (thread) hose sizeSEG/HEG 1212 M 12 x 1,5 12,1 21 8,0 28,3 39,0 21,0 17,8 12SEG/HEG 1616 M 16 x 1,5 16,1 25 10,5 32,4 44,6 24,7 20,1 16SEG/HEG 2020 M 20 x 1,5 20,1 30 12,0 39,5 52,4 29,8 24,6 20SEG/HEG 2525 M 25 x 1,5 25,1 38 15,0 49,4 65,9 37,2 30,8 25SEG/HEG 3232 M 32 x 1,5 32,2 45 15,0 60,0 77,4 45,0 37,5 32
WERKSTOFF- undDIMENSIONSSCHLSSEL
z.B. SGL 20 20
Anschlu-gewindeM 20x1,5
Werk-stoffPA
Schlauch-Dimension20mm
MATERIAL andDIMENSION CODES
e.g. SGL 20 20
connectingthreadM 20x1,5
materialPA
hosedimension20mm
ELBOW GLAND WITH FLANGEWINKEL MIT FLANSCH
ELBOW GLANDWINKELVERSCHRAUBUNG
STRAIGHT GLANDGERADE VERSCHRAUBUNG
Technische Datenzu HFT-Schlauch-verschraubungen
Technical Datafor HFT glands forprotective hoses
colour: black (RAL 9005), UV stabilizedgrey (RAL 7035)compression strength: > 320 Nclassification: EN 2343temperature rating: -25C to +105C
Farbe: Schwarz (RAL 9005), UV-stabilisiert Grau (RAL 7035)Druckfestigkeit: > 320 NKennzeichen: EN 2343Einsatzbereich: -25C bis +105C
89
Kabelschutzschluche Protective Hoses
Schutzschlucheprotective hoses
Type fr Schutzschlauch Kabelgretype for protective hose cable size
SKGL 2020 HFXS 20 5mm-10mm SKEG 2020 HFXS 20 5mm-10mm SKGL 2525 HFXS 25 7mm-14mm SKEG 2525 HFXS 25 7mm-14mm
KABEL/SCHLAUCHVERSCHRAUBUNGEN GRAU, SCHWARZCABLE/HOSE GLAND GREY, BLACK
type G L A D d grey black
SKGL 2020 M 20x1,5 10,0 44,5 29,8 25,4 024883 024997SKGL 2525 M 25x1,5 10,0 54,4 37,2 30,4 024882 024998
gerade Verschraubungen straight gland cat. 54 art.no.
Halogenfreier, flammwidriger und temperaturbestndi-ger Kunststoff (Polyamid), mit Schnellkupplungssystem,Schutzart IP 65.Zum zugfesten und dichten Anschluss von Wellrohrenbei gleichzeitiger Abdichtung der Kabeleinfhrung.Farbe: Schwarz (RAL 9005), UV-stabilisiert Grau (RAL 7035)Einsatzbereich: -25C bis +105C
neuentwickelte Kabel/Schlauchverschraubung mitzweifachem Dichtelement:1. Dichte Verbindung Schlauch-Verschraubung2. Dichte Verbindung Verschraubung-Kabelzum Schutz von Betreibsmitteln vor Staub-, Wasser-und Gaseintritt in das Schlauchsystem.
Zuordnung application SKGL/SKEG
type G L A B D h d grey black
SKEG 2020 M 20x1,5 10,0 39,9 70,0 29,8 25 25 026369 026371SKEG 2525 M 25x1,5 10,0 48,6 84,4 37,2 30 30 026370 026372
Winkelverschraubungen elbow gland cat. 54 art.no.
PG auf Anfrage PG upon request
Anschlugewinde G Verschlukappe
GegenmutterHFXS-Kabelschutzschlauch
Kabel
Auendichtung Druckstck
Schutzschlauchdichtung
Haltering
Innendichtungconduit sealing ring
clamp ring
inner cable seal
thread seal
cable
connecting thread cap
locknutHFXS protective hose
retainer ring
Technische Datenzu HFT-Kabel/Schlauch-verschraubungen
Technical Datafor HFT combinedcable/hose glands
PG auf Anfrage PG upon request
Halogenfree, flame retardant and temperature resistantplastic glands (polyamide), with quick-fit plug-in system,protection degree IP 65.Tensile stress resistant and tight connection ofcorrugated conduits with tight cable connection.colour: black (RAL 9005), UV stabilized grey (RAL 7035)temperature rating: -25C to +105C
newly developed combined cable/hose glands withdouble protection:1. tight connection hose-gland2. tight connection gland-cablefor the protection of electrical equipment against dust,water or gas ingress into the hose system.
IP 65
79
Kabelkanalsysteme Trunking Systems
Kanletrunkings
Das neue UNIVOLT - STARLINE Sockel-leisten- und Wandkanal-System bietet eineeinfache und praktische Lsung fr dieVerlegung von Strom-, Daten- und Tele-kommunikationskabel in neuen wie auchrenovierten Gebuden.
Dem steigenden Bedarf an Verkabelungen immodernen Brobereich Rechnung tragend hatDIETZEL-UNIVOLT mit STARLINE ein stheti-sches Profil in erstklassiger Ausfhrung ent-wickelt.
Dieses variable System wird in drei Ausfhrun-gen mit jeweils drei getrennten Kammernangeboten. Weitere Unterteilungen knnendurch Verwendung von Trennstegen im Mittel-teil hergestellt werden.
Das STARLINE-System stellt eine idealeLsung fr Bros, Krankenhuser, Hotels,Laboratorien, Kaufhuser, Konferenzzentren,usw. dar.
Wandkanal
Trapez-Kanal SLC
Sockelleistenkanal SLS
auch in halogenfreier Ausfhrung mit Alu-Basisteil lieferbar
The new UNIVOLT - STARLINE Skirting andDado-Trunking System has been developed toprovide a practical solution for the supply ofpower, data and telecommunication cabling innew and refurbished buildings.
In response to an increased demand for cablemanagement especially in the modern officeenvironment, DIETZEL-UNIVOLT havedesigned this system in an aestheticallypleasing profile and finish.
This modular system is available in threestandard trunking assemblies, all with threefully segregated compartments.
Further segregation of services may beachieved by using trunking dividers within thecentre compartment.
The system is ideal for use in offices,hospitals, laboratories, conference centresetc.
Skirting Trunking SLS
Dado Trunking, chamfered
Dado Trunking, square
available also halogenfree with aluminium trunking body
Besonderheiten: komplettes Zubehr steckbar integrierte Gertedosen geeignet fr verschiedene Gertestandards
Features: full range of clip-on fittings integral outlet boxes suitable for different device standards
Starlinein Stangen zu 3m Dim. 50x170mmFarbe: Wei Verpackung: 2x3mKennzeichen: 211 Druckfestigkeit: > 1000 NEinsatzbereich: -25C bis +60CBreite der Zge: 37/82/37mm
DIN-Gertedose FI/LS Abdeckung
SLB-D (040223) MRE 50/170 (040212)
QIE 50/170 QAE 50/170 QK 50/170036070 036071 036072
SIE 50/170 SAE 50/170 SK 50/170036057 036058 036059
CIE 50/170 CAE 50/170 CK 50/170036066 036067 036068
Gerte-Einbau-Dosenzum Einrasten imMittelteil
036054
036055
036056
Inneneck Aueneck Kupplung
80
SOCKELLEISTEN-KANALSKIRTING TRUNKING
internal angle external angle coupler
SOCKELLEISTEN-KANALDADO TRUNKING, chamfered
SOCKELLEISTEN-KANALDADO TRUNKING, square
1000 N
SLS 50/170EN 50085
SLQ 50/170EN 50085
SLC 50/170EN 50085
Outlet Boxes forclip-on mounting incentre compartment
Starlinein lengths of 3m dim. 50x170mmcolour: white packing: 2x3mclassification: 211 compression strength: > 1000 Ntemperature rating: -25C to +60Cwidth of compartments 37/82/37mm
outlet box housing
anreihbaralignable
Kabelkanalsysteme Trunking Systems
Konditionsgruppe category 49
Konditionsgruppe category 49
Konditionsgruppe category 49
Art.Nr.art.no.
Art.Nr.art.no.
Art.Nr.art.no.
Bezeichnung item codeArt.Nr. art.no.
Bezeichnung item codeArt.Nr. art.no.
Bezeichnung item codeArt.Nr. art.no.
Bezeichnung (Art.Nr.)item code (art.no.) fr FI/LS-Schalter
for FI/LS switchesBreite width 45mm
f. Schalter u. Steckdosenf. switches and socketsTiefe depth 28mm
SFWUSFWD
Kabelhalter Kreuzungsstck Trennwand Innen-Kupplung
SH 50/170 (036063) COU 50/170 (040222) MTW 50 (019717) SIC 50/170 (036077)
QE 50/170 AS 50/170 QFW 50/170 QFT 50/170 QH 50/170036073 036062 036898 036784 036065
SEL/SER 50/170 AC 50/170 SFWU/SFWD 50/170 SFTU/SFTD 50/170 CH 50/170 QH 50/170036060 / 036061 036062 036730 / 036731 036781 / 036782 036064 036065
CE 50/170 AC 50/170 CFW 50/170 CFT 50/170 CH 50/170036069 036062 036729 036783 036064
Endstck bergangsstck Flachwinkel T-Stck Kabelhalter Kabelhalter
81
stop end adaptor flat angle flat tee cable retainer cable retainer
cable retainer crossover unit trunking divider internal coupling
fr Mittelteilfor centercompartment
fr abgeschrgteZgefor chamferedcompartments
fr rechteckigeZgefor squarecompartments
Kabelkanalsysteme Trunking Systems
Kanletrunkings
SFTUSFTD
aufwrtsupward
abwrtsdownward
links rechtsleft right
fr MIK 16/16 und 16/25(in Verbindung mit SKE-bergang)for MIK 16/16 and16/25(in conjunction with SKEadaptors)
fr MIK 16/16 und 16/25(in Verbindung mit SKE-bergang)for MIK 16/16 and16/25(in conjunction with SKEadaptors)
fr MIK 16/16 und 16/25(in Verbindung mit SKE-bergang)for MIK 16/16 and16/25(in conjunction with SKEadaptors)
Lieferlnge standard length 3m
aufwrtsupward
abwrtsdownward
82
Kabelkanalsysteme Trunking SystemsRASCH - ROBUST -
RATIONELL - SICHERHFT-Schutzschluche & Verschraubungenfr universelle Anwendungsmglichkeiten
Vorteil 1Schnellmontage durchpatentiertes Steck-system.
Vorteil 2Zugfeste Verbindung,dennoch drehbar.Keine Torsions-belastung an Kabeloder Leitungen.
Vorteil 3Schnellverschluermglicht raschesLsen der Schlauch-verbindung.
HFXS
SGL
Haltering Anschluteil mit Gewinde IEC (Pg, NPT auf Anfrage)
Schutzschlauchdichtung Auendichtung
Verschlukappe
Funktionsweisefunctioning
Querschnittsectional view
Schutzschluche undVerschraubungen ausPolyamid sind:HALOGENFREIFLAMMWIDRIGTEMPERATURBESTNDIGSCHLAG- und DRUCKFESTHOCHFLEXIBELL- u. KRAFTSTOFFBESTNDIGTRITTFEST
QUICK - SAFE - EFFICIENT
HFT Protective Hoses and Glands foruniversal applications in cable protection
connecting piecewith thread IEC(Pg, NPT upon request)
conduit sealing ring sealing ring
quick-release cap
Advantage 1Quick-fit assemblywith patentedplug-in system.
Advantage 2Rotatory connectionwith high tensilestress resistance.No torsial stress oncables or wires.
Advantage 3Patented quick-release lock for quickopening ofconnections.
Protective Hoses and Glandsfrom polyamide are:HALOGENFREEFLAME RETARDANTTEMPERATUR RESISTANTIMPACT AND COMPRESSIONRESISTANTHIGHLY FLEXIBLEOIL AND FUEL RESISTANT
temperature rating: -25C bis +105C for short time +140C
Einsatztbereich: -25C bis +105C kurzfristig bis +140C
retainer ring
Kabelschutzschluche Protective Hoses
33
Werkzeuge, Montagematerial Tools, Mounting Material
Werkzeugetools
34
Werkzeuge, Montagematerial Tools, Mounting Material
HSK II 200 20 m 000102HSK II 20 50 Stk. 000091 000288 000216halogenfreie Ausfhrung auf Anfrage halogenfree version upon request
5m 1 000941 00094710m 1 000942 00094815m 1 000943 00094920m 1 000944 00095025m 1 000945 00095130m 1 000946 000952
VKS 500ml 1 042984HVKS 310 ml 1 014691G-35 1000ml 1 043248
HSK fixing stripin standard length of 20cm, alignable or inlength of 2m, especially suitable for mountingclips CL, pre-punshed fixing hole,made of PVC.colour: light grey (RAL 7035), grey (RAL 7037) black (RAL 9005)
upon request: white (RAL 9010)
Hohlschienein Kurzlngen zu 20cm, zusammensteckbaroder in Lnge von 2m, speziell fr die Montagevon Klemmschellen CL geeignet, gelocht,aus PVC.Farbe: Hellgrau (RAL 7035), Grau (RAL 7037) Schwarz (RAL 9005)
auf Anfrage: Weiss (RAL 9010)
EZFEZFK
draw-in tapefrom metal (EZF) or plastic (EZFK),wiring and cabling aid for cable managementconduits.
Einziehfederaus Metall (EZF) oder Kunststoff (EZFK),Einziehhilfe fr Verdrahtung und Verkablungder Installationsrohre.
VKSHVKSG-35
sealing cement andlubricatorcement VKS for PVC material and HVKS forHFT material
Rohrverbindungskleber undGleitmittelKleber VKS fr PVC-Material und HVKS frHFT-Material
Bezeichnung Lnge/cm Verpackung m/Stk. Art.Nr.: hellgrau grau schwarzitem code length/cm packing m/pcs. art.no.: light grey grey black
Konditionsgruppe category 8
Lnge/m Verpackung Stk. Art.Nr.: Metall Kunststofflength/m packing pcs. art.no.: metal plastic
Konditionsgruppe category 14
Bezeichnung Inhalt/ml Verpackung Stk. Art.Nr.item code content/ml packing pcs. art.no.
Konditionsgruppe category 14
H V K S
USZ-S 1 015008USZ-S/EM Ersatzmesser blade 1 004777
USZ-S UNIVOLT cuttersuitable for cutting conduits up to 32 and minitrunkings up to size 25/40mmand conduits
UNIVOLT Schneidezangefr Rohre bis 32 und Kabelkanle bis zurGre 25/40mmund Rohre
Konditionsgruppe category 55
Bezeichnung Verpackung Stk. Art.Nr.item code packing pcs. art.no.
21
Metal Conduits and FittingsMetallrohre und Zubehr Metal Conduits and Fittings
Metallrohre
metal conduits
StahlpanzerrohreAluminiumrohre
EMV-SchirmrohreEdelstahlrohre
Steel ConduitsAluminium Conduits
EMC Screening ConduitsStainless Steel Conduits
22
Metallrohre und Zubehr Metal Conduits and Fittings
20 1,00 18,00 30 019899 01990625 1,20 22,60 30 019900 01990732 1,20 29,60 21 019901 01990840 1,20 37,60 15 019902 01990950 1,20 47,60 15 019903 01991063 1,20 60,60 9 019904 019911
20 15,80 25 02102825 20,50 25 02102932 27,50 25 02103040 36,00 25 02103150 45,30 25 02103263 58,00 25 026269
20 15,80 25 02102325 20,50 25 02102432 27,50 25 02102540 36,00 25 02102650 45,30 25 02102763 58,00 25 024557
Starre und biegsameStahlpanzerrohreohne Gewindeschwere Ausfhrung
SSR
Rigid and PliableSteel Conduitswithout Threadheavy gauge
starres Rohrin Stangen zu 3mAusfhrungen:1. Schwarz einbrennlackiert (RAL 9005)
Kennzeichen: EN 4456Einsatzbereich: -45C bis +250C
2. FeuerverzinktKennzeichen: EN 4457Einsatzbereich: -45C bis +400C
EN 50086-2-1
compression strength: > 1250 NDruckfestigkeit: > 1250 N
1250 N
FPREN 50086-2-2
KFREN 50086-2-2
rigid conduitin lengths of 3mVersions:1. black enamelled (RAL 9005)
classification: EN 4456temperature rating: -45C to +250C
2. hot dip galvanizedclassification: EN 4457temperature rating: -45C to +400C
biegsames Rohrmit isolierender Zwischenschichtin Ringen zu 25mMaterial:aus verbleitem StahlblechKennzeichen: EN 4446Einsatzbereich: -25C bis +250C
pliable conduitwith insulating intermediate layerin coils of 25mmaterial:leaded sheet steel wireclassification: EN 4446temperature rating: -25C to +250C
biegsames Rohrmit isolierender Zwischenschichtund Kunststoffummantelungin Ringen zu 25mMaterial:aus verbleitem StahlblechKennzeichen: EN 4441Einsatzbereich: -25C bis +60C
pliable conduitwith insulating intermediate layerand plastic sheathingin coils of 25mmaterial:leaded sheet steel wireclassification: EN 4441temperature rating: -25C to +60C
Dim. Wand/mm innen Verpackung m Art.Nr.: lackiert feuerverzinktdim. wall/mm inner packing m art.no.: enamelled galvanized
Dim. innen Verpackung m Art.Nr.dim. inner packing m art.no.
Konditionsgruppe category 18
Konditionsgruppe category 22
Konditionsgruppe category 22
Dim. innen Verpackung m Art.Nr.dim. inner packing m art.no.
stapafit
stapaflex
korroflex
23
Metal Conduits and FittingsMetallrohre und Zubehr Metal Conduits and Fittings
Metallrohre
metal conduits
20 1,60 16,80 30 019913 01992025 1,60 21,80 30 019914 01992132 1,60 28,80 21 019915 01992240 1,60 36,80 15 019916 01992350 1,60 46,80 15 019917 01992463 1,80 59,50 9 019918 019925
20 100 020944 02095025 100 020945 02095132 50 020946 02095240 50 020947 02095350 25 020948 02095463 5 020949 020955
GSR starres Rohrin Stangen zu 3mmit aufgeschraubter GewindemuffeAusfhrungen:1. Schwarz einbrennlackiert (RAL 9005)
Kennzeichen: EN 5556Einsatzbereich: -45C bis +250C
2. FeuerverzinktKennzeichen: EN 5557Einsatzbereich: -45C bis +400C
EN 50086-2-1
rigid conduitin lengths of 3mwith coupler on one endVersions:1. black enamelled (RAL 9005)
classification: EN 5556temperature rating: -45C to +250C
2. hot dip galvanizedclassification: EN 5557temperature rating: -45C to +400C
Zubehhr frStahlpanzerrohreAusfhrung:Schwarz einbrennlackiert oderfeuerverzinkt
Fittings forSteel Conduitsversions:black enamelled orhot dip galvanized
SSMfr for SSR
GSMfr for GSR
plain couplerSteckmuffe
threaded couplerGewindemuffe
StarreStahlpanzerrohremit Gewindesehr schwere Ausfhrung
RigidSteel Conduitswith Threadvery heavy gaugecompression strength: > 4000 NDruckfestigkeit: > 4000 N
4000 N
Dim. Wand/mm innen Verpackung m Art.Nr.: lackiert feuerverzinktdim. wall/mm inner packing m art.no.: enamelled galvanized
Konditionsgruppe category 18
Konditionsgruppe category 19
Konditionsgruppe category 19
20 100 021033 02103925 100 021034 02104032 50 021035 02104140 50 021036 02104250 25 021037 02104363 5 021038 021044
Dim. Verpackung Stk. Art.Nr.: lackiert feuerverzinktdim. packing pcs. art.no.: enamelled galvanized
Dim. Verpackung Stk. Art.Nr.: lackiert feuerverzinktdim. packing pcs. art.no.: enamelled galvanized
stapalock
24
Metallrohre und Zubehr Metal Conduits and Fittings
SUK 1 130x130x55 32 mm 1 021892SUK 2 190x150x75 40 mm 1 021893
20 50 021045 02105125 50 021046 02105232 25 021047 02105340 1 021048 02105450 1 021049 02105563 1 021050 021056
20 100 021069 02107825 100 021070 02107932 100 021071 02108040 50 021072 02108150 50 021073 02108263 50 021074 021083
20 100 035425 06484925 100 035426 06485032 50 035427 06485140 50 035428 06485250 25 035429 06485363 10 035430 064854
20 50 05418025 25 05427732 25 05426840 10 05426050 10 05407963 10 054019
SSBfr for SSR
GSBfr for GSR
plain normal bend 90Steckbogen 90
20 50 020956 02096225 50 020957 02096332 25 020958 02096440 1 020959 02096550 1 020960 02096663 1 020961 020967
threaded normal bend 90Gewindebogen 90
SSfr for SSR & GSR
FPEfr for SSR & GSR
saddleSchelle
plastic end capKunststoffendtlle
GMfr for GSR
SUKfr for SSR & GSR
lock nutnickel-plated brass
GegenmutterMessing vernickelt
enclosure boxiron casting, enamelled
Universalkastenaus Guss, lackiert
circular boxes upon requestAbzweigdosen auf Anfrage
Dim. Verpackung Stk. Art.Nr.: lackiert feuerverzinktdim. packing pcs. art.no.: enamelled galvanized
Dim. Verpackung Stk. Art.Nr.: lackiert feuerverzinktdim. packing pcs. art.no.: enamelled galvanized
Konditionsgruppe category 19
Konditionsgruppe category 19
Dim. Verpackung Stk. Art.Nr.: lackiert feuerverzinktdim. packing pcs. art.no.: enamelled galvanized
Konditionsgruppe category 19
Dim. Verpackung Stk. Art.Nr.: schwarz hellgraudim. packing pcs. art.no.: black light grey
Konditionsgruppe category 19
Bezeichnung Abmessungen max. Bohrung Verpackung Stk. Art.Nr.: lackiertitem code dimensions max. entry diam. packing pcs. art.no.: enamelled
Konditionsgruppe category 19
Konditionsgruppe category 54
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
25
Metal Conduits and FittingsMetallrohre und Zubehr Metal Conduits and Fittings
Metallrohre
metal conduits
16 1,00 13,50 15 03545820 1,00 17,50 15 03525025 1,20 22,00 15 03525132 1,20 29,00 15 03525240 1,20 37,00 15 03525350 1,20 46,90 15 03525463 1,50 58,80 15 035255
16 1,40 12,60 15 03517720 1,60 16,20 15 03517825 1,60 21,10 15 03517932 1,60 28,10 15 03518040 1,60 36,10 15 03518150 1,60 46,00 15 03518263 1,80 58,80 15 035183
StarreAluminiumrohreohne Gewindeschwere Ausfhrung
Rigid AluminiumConduitswithout Threadheavy gauge
1250 N
StarreAluminiumrohremit Gewindesehr schwere Ausfhrung
Rigid AluminiumConduitswith Threadvery heavy gauge
4000 N
starres Rohrin Stangen zu 3mmit aufgeschraubter Gewindemuffe
rigid conduitin lengths of 3mwith coupler on one end
processing: aluminium, raw(Al Mg Si 0.5-F22)compression strength: > 1250 Nclassification: EN 4456temperature rating: -25C to +250C
Ausfhrung: Aluminium, roh(Al Mg Si 0,5-F22)Druckfestigkeit: > 1250 NKennzeichen: EN 4456Einsatzbereich: -45C bis +250C
SALR starres Rohrin Stangen zu 3mEN 50086-2-1
rigid conduitin lengths of 3m
processing: aluminium, raw(Al Mg Si 0.5-F22)compression strength: > 4000 Nclassification: EN 5556temperature rating: -25C to +250C
Ausfhrung: Aluminium, roh(Al Mg Si 0,5-F22)Druckfestigkeit: > 4000 NKennzeichen: EN 5556Einsatzbereich: -45C bis +250C
GALREN 50086-2-1
Konditionsgruppe category 18
Konditionsgruppe category 18
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
alufit
alulock
26
Metallrohre und Zubehr Metal Conduits and Fittings
16 50 035235 03522520 50 035236 03522625 50 035237 03522732 50 035238 03522840 25 035239 03522950 25 035240 03523063 15 035241 035231
16 5 035242 03517020 5 035243 03517125 5 035244 03517232 5 035245 03517340 5 035246 03517450 5 035247 03517563 5 035248 035176
Zubehhr frAluminiumrohre
Fittings forAluminium Conduits
SALMfr for SALR
couplerplain coupler for SALRthreaded coupler for GALR
MuffeSteckmuffe fr SALRGewindemuffe fr GALRGALM
fr for GALR
for plastic end capssee steel conduit fittings
Kunststoffendtllensiehe Stahlrohrzubehr
end capEndtlle
ALKaluminium clipAluminium-Klemmschelle
aluminium bracketAluminium-HaltebgelALS
normal bend 90plain normal bend for SALRthreaded normal bend for GALR
Bogen 90Steckbogen fr SALRGewindebogen fr GALR
ALE
fixing strip and screwsMontageschiene und Schrauben
Konditionsgruppe category 21
Konditionsgruppe category 21
Konditionsgruppe category 21
Konditionsgruppe category 21
Dim. Verpackung Stk. Art.Nr.: fr SALR fr GALRdim. packing pcs. art.no.: for SALR for GALR
SALBfr for SALR
GALBfr for GALR
Dim. Verpackung Stk. Art.Nr.: fr SALR fr GALRdim. packing pcs. art.no.: for SALR for GALR
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
40 10 03521550 10 03521663 10 035217
ALMS 5 035196ALSCH 10 035390
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
16 50 03521820 50 03521925 50 03522032 50 03522140 25 03522250 25 03522363 15 035224
16 50 03545920 50 03546025 50 03546132 50 03546240 25 03546350 25 03546463 15 035465
27
Metal Conduits and FittingsMetallrohre und Zubehr Metal Conduits and Fittings
Metallrohre
metal conduits
UNIVOLT SCHIRMROHRUNIVOLT SUPERTUBE
We deliver the power ...
28
Metallrohre und Zubehr Metal Conduits and Fittings
UNIVOLT-Supertube compliments the widerange of our halogenfree Cable Manage-ment System. Virtually everywhere whereconventional metal or plastic conduit isused, Supertube is finding its application.The conduit is made of a welded aluminiumtube with inner and outer layers ofhalogenfree polyethylene and combines thestrength of metal with the flexibility andinsulating characteristics of plastic. Coilscan be carried and laid with ease, no bendsare required, as it is bent by hand or ahand held bending tool for straight runs onsurface.The conduit is flame retardant, halogenfreeand has low smoke density and can beused with the HFT-range of fittings.
EMV-Verbund-schirmrohremittlere Ausfhrung
EMC ScreeningConduitsmedium gauge
750 N
colour: light grey (RAL 7035)compression strength: > 750 Nclassification: EN 3354temperature rating: -25C to +120C
Farbe: Hellgrau (RAL 7035)Druckfestigkeit: > 750 NKennzeichen: EN 3354Einsatzbereich: -45C bis +120C
16 2,00 12,00 50 041245 04125820 2,25 15,50 50 040924 04092225 2,50 20,00 50 041246 041259
Schirmrohrin Stangen zu 3m (HFSR-S) oderRingen zu 50m (HFSR-R)
screening conduitin lengths of 3m (HFSR-S) orcoils of 50m (HFSR-R)
HFSREN 50086-2-1EN 50086-2-2
Fr detaillierte technische Beschreibungenund weiterfhrenden Informationen zuUNIVOLT SUPERTUBE fordern Sie bitte unserInformationsbrschre an.For detailed technical descriptions of andfurther information aboutUNIVOLT SUPERTUBE please order ourspecial information folder .
Aluminium-Schirmaluminium screen
PE-InnenmantelPE inner coat
PE-AuenmantelPE outer coat
Gewinde fr leit-fhige Verbindungthreaded coat to provideearthing continuity
In UNIVOLT Schirmrohre verbinden sich dieVorteile unserer halogenfreien Elektro-installationsmaterialien mit jenen ausMetall, wodurch sich ein sehr breitesEinsatzspektrum ergibt. Das Rohr wird auseiner Aluminiumschicht gefertigt, die voneinem ueren und inneren Mantel ausPolythylen umgeben ist. Somit sindgleichzeitig die Strke von Metallrohren undIsolationseigenschaften von Kunststoff-rohren gegeben. Das geringe Gewicht unddieBiegsamkeit erlauben eine leichteVerarbeitung und somit Kostenersparnis beider INstallation.Schirmrohre sind flammwidrig, halogenfrei,im Brandfall rauchgasarm und sind mit demgesamten HFT-Zubehr kombinierbar..
Dim. Wand/mm innen Verpackung m Art.Nr.: Ringe Stangendim. wall/mm inner packing m art.no.: coils lengths
Konditionsgruppe category C6
29
Metal Conduits and FittingsMetallrohre und Zubehr Metal Conduits and Fittings
Metallrohre
metal conduits
80x125x57mm 1 043098120x220x80mm 1 043099200x230x110mm 1 043101
16-25 1 041606
Zubehhr frEMV-Schirmrohre
Fittings for EMCScreening Conduits
GM lock nutnickel-plated brass
GegenmutterMessing vernickelt
USZ-S 1 015008USZ-S/EM Ersatzmesser blade 1 004777
USZ-S UNIVOLT cuttersuitable for cutting mini trunkings up to size 25/40mm
UNIVOLT Schneidezangefr Kabelkanle bis zur Gre 24/40mm
UBZ bending toolsuitable for conduit dimension 16 to 25
Biegezangefr Rohrdurchmesser 16 bis 25
GSW thread cutting toolsuitable for conduit dimension 16 to 25
Gewindeschneiderfr Rohrdurchmesser 16 bis 25
GK-ALU enclosure boxwith lid and washer
Abzweigkastenmit Deckel und Dichtung
Abmessungen Verpackung Stk. Art.Nr.measurements packing pcs. art.no.
Konditionsgruppe category 19
20 50 05418025 25 05427732 25 05426840 10 05426050 10 05407963 10 054019Konditionsgruppe category 54
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Konditionsgruppe category C8
fr Dimensionen Verpackung Stk. Art.Nr.for dimensions packing pcs. art.no.
16-25 1 040940
fr Dimensionen Verpackung Stk. Art.Nr.for dimensions packing pcs. art.no.
Konditionsgruppe category C8
Konditionsgruppe category 55
Bezeichnung Verpackung Stk. Art.Nr.item code packing pcs. art.no.
30
Metallrohre und Zubehr Metal Conduits and Fittings
20 1,20 17,60 30 04102025 1,20 22,60 30 04102232 1,50 29,00 21 04102440 1,50 37,00 15 041173
20 100 06441325 100 06441432 50 06441540 50 064416
20 100 06442025 100 06442132 50 06442240 50 064423
20 100 06442425 100 06442532 50 06442640 50 064427
20 100 035425 06485925 100 035426 06485032 50 035427 06485140 50 035428 064852
StarreEdelstahlrohreohne Gewindeschwere Ausfhrung
Rigid StainlessSteel Conduitswithout Threadheavy gauge
1250 N
quality: stainless steel, rawcompression strength: > 1250 Nclassification: EN 4456temperature rating: -25C to +250C
Ausfhrung: Edelstahl, rohDruckfestigkeit: > 1250 NKennzeichen: EN 4456Einsatzbereich: -45C bis +250C
saddleSchelleES
ESB normal bend 90Steckbogen 90
plain couplerSteckmuffe
ESR starres Rohrin Stangen zu 3mEN 50086-2-1rigid conduitin lengths of 3m
Konditionsgruppe category C9
Dim. Wand/mm innen Verpackung m Art.Nr.dim. wall/mm inner packing m art.no.
ESM
Konditionsgruppe category D7
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Konditionsgruppe category D7
Dim. Verpackung Stk. Art.Nr.dim. packing pcs. art.no.
Konditionsgruppe category D7
FPE plastic end capKunststoffendtlleDim. Verpackung Stk. Art.Nr.: schwarz hellgraudim. packing pcs. art.no.: black light grey
Konditionsgruppe category 19
69
Telekom-Rohrsysteme Telecom Ducting Systems
Telekomtelecom
We deliver the power ...
Schutzrohre fr LichtwellenleiterDruckmuffen und Zubehr
Kabelkanalrohreund Zubehr
Ductings for Optical Fibre CablesPressure Connectors and Fittings
Cable Sewer Pipes and Fittings
70
Telekom-Rohrsysteme Telecom Ducting Systems
dim. s/mm di/mm marking* item code packingm/coil m/drum m/PaCable
40 3,0 34,0 Univolt LWL 40 250 500 or 1000 200050 4,0 42,0 Univolt LWL 50 250 500 or 1000 125050 4,6 40,8 Univolt LWL 50 250 500 or 1000 1250
Weiters knnen Lichtwellenleiterrohre auch auf Holz- und Stahltrommeln, PACABLES und anderen Verpackungsmittelin Grolngen nach Sondervereinbarung gefertigt werden. Die Fertigungslngen sind abhngig von der Dimension undVerpackung. Lieferlngen sind, in Abhngigkeit von der Rohrdimension und Verpackungsart, zwischen 1000m/Verpa-ckung (Minimum) bis 4000m/Verpackung (Maximum) mglich.Zustzlich sind zur Unterscheidung spezifischer Leitungssysteme auch andere Farben mit Farblngsstreifen und spe-zielle Signierungen am Rohr mglich und gegen Sondervereinbarung lieferbar.
LWL optical fibre ductings can also be supplied on wood or steel drums, on PaCable drums and other coilingdevices in longer runs upon special request. The lengths per drum vary from 1000m (minimum) per drum to 4000m(maximum) per drum depending on the dimensions of the ductings and the type of coiling or wrapping.Upon special request and terms of delivery we also supply ductings in different colours with different longitudinalcoloured stripes and markings for applications where the cabling systems need to be distinguished.
LWL ducting for optical fibres from PE-HD(smooth exterior, longitudinally grooved interior), withoutconnector, acc. DIN 8074/8075; black,available in different lengths and versions upon request.
Schutzrohre frLichtwellenleiteraus halogenfreiem PE
LWL
Ductings forOptical Fibre Cablesfrom halogenfree PE
optical fibre cable ductingsmooth exterior, longitudinally grooved interior,without coupler, in coils of 250m
Lichtwellenleiter-Schutzrohrauen glatt, innen lngsgerieft, ohne Muffe,in Ringen zu 250m
colour: black (RAL 9005), UV stabilizedtemperature rating: -5C to +90C
Farbe: Schwarz (RAL 9005), UV-stabilisiertEinsatzbereich: -5C bis +90C
* andere Beschriftung auf Anfrage* other markings upon request
LWL, Lichtwellenleiterschutzrohre aus PE-HD(auen glatt, innen lngsgerieft), ohne Muffe, gem DIN8074/8075; schwarz,auf Anfrage in verschiedenen Ausfhrungen lieferbar.
71
Telekom-Rohrsysteme Telecom Ducting Systems
Telekomtelecom
Druckmuffen undZubehrfr LWL-Schutzrohre
Pressure Conn
Recommended