Candle Holder - prattparametricsdotcom.files.wordpress.com · Candle Holder Practical:...

Candle Holder

Practical: Cutting-Sanding-Bending-Rotating-Welding-Coating

Modeling: Extruding-Sweeping-Capping-Revolving

2 practical way to model

1. Bend the wood

Shape

Revolving (Rotating) Offsetting

Extruding Sweeping (Capping)

2. Cut in curve shape

Candle Holder

Practical: Cutting-Shaping-Sanding-Punching (handle) Cutting-Binding-Grouping(Fiber)

Modeling: Extruding-Sweeping(handle) Extruding-Grouping-Arraying(Fiber)

Extruding Carving Filleting

ExtrudingCutting Filleting

or

Handle Part

Brush PartPractical Producing

Arraying (Aggregating)

Grouping

Bending

CurvingExtrudingSweeping

RevolvingRotatingArraying

SplittingTrimming

Rotating

Pratical

Digital

Carving

3D Print Material Research

NYLON: (Polyamide)

Also called White, strong & flexible / Durable plastic / White plasticStrong and flexible plastic1mm minimum wall thicknessNaturally white, but you can get it coloredAbout 10 layers per 1mmMade from powderAlumide = Polyamide + AluminumInterlocking, moving parts possible (chain)

ABS: (Home printers)

Strong plastic like legos areMade from spaghetti like filamentMany color optionsAbout 3 layers per 1mm1mm minimum wall thickness

3D Print Material Research

RESIN: (Multiple options)

Also called White-, Black-, Transparent detail / White detail resin / High detail-, Transparent-, Paintable ResinRigid and a bit delicateLiquid Photopolymer cured with UV lightWhite, black & transparent most typical colorsAbout 10 layers per 1mm1mm minimum wall thickness

STAINLESS STEEL:

Very strong materialMade with multiple steps or from powder directlyColoring options like gold and bronze platingAbout 6 layers per 1mm3mm minimum wall thickness

3D Print Material Research

GOLD & SILVER:

Strong materialsMade from wax and then castedAbout 10 layers per 1mm0.5mm minimum wall thickness

TITANIUM:

Strongest materialDirect metal laser sinteringAbout 30 layers per 1mm0.2mm minimum wall thickness

3D Print Material Research

CERAMIC:

Rigid & delicateFirst ceramic is printed then surface is glazedCeramic white, glaze typically whiteAbout 6 layers per 1mm3mm minimum wall thickness

GYPSUM:

Also called Sandstone / Rainbow ceramics / MulticolorRigid & delicateMade from powderNaturally white, but you can get it with colorsAbout 10 layers per 1mm2mm minimum wall thickness

Extruding+ Arraying

Sweeping+Layering

Revolving+Rotating