DESIGN PROJECT

“STARS”CANDLE HOLDER

CHRISTMAS

2 /6 WWW.CREATE-YOUR-STYLE.COM

SWAROVSKI ELEMENTS Supplies & Tools

Wiring

Article Product Group Article No. Amount Size Color Color Code

Pendants 6714 1 pc. 20 mm Crystal 001

Pendants 6714 1 pc. 20 mm Crystal AB 001 AB

Pendants 6714 1 pc. 28 mm Crystal AB 001 AB

Supplies

1x Candle holder clipable, silverChain, silver, 20 cm5x Jumpring, silver, 4 mmWire, silver, 0.8 mm, 10 cm

Tools

Flat nose pliersRound nose pliersSide cutter

Level of design: BEGINNER

Have also a look at the text instruction at the last page!

STEP 1

0.8 mm 10 cm Repeat

7 mm

CHRISTMAS CANDLE HOLDER “STARS”

3 /6 WWW.CREATE-YOUR-STYLE.COM

Step 2

8 mm x220 mm x154 mm x1

8 mm 8 mm 20 mm 54 mm

A = 2 cmB = 3 cmC = 6 cm

6714 20 mm Crystal

6714 28 mm Crystal AB

6714 20 mm Crystal AB

7 mmA

Step 3

Repeat step x2: B C

4 mm 4 mm 4 mm 4 mm

STEP 2

STEP 3

4 /6 WWW.CREATE-YOUR-STYLE.COM

Step 5

STEP 4

STEP 5

5 /6 WWW.CREATE-YOUR-STYLE.COM

1/2

1 2

3

3

6 /6 WWW.CREATE-YOUR-STYLE.COM

STEP 1: Cut 10 cm of silver wire (0.8 mm) and form spirals using round nose pliers (approx. 7mm in length). Cut the spirals to get 7 jump rings as illustrated.

STEP 2: Cut two 8 mm pieces of chain and one 20 mm piece and attach them with two jump rings. Attach one jump ring to the end of the 8mm piece. Cut one 54 cm piece of chain and attach it to with another 4 mm jump ring as shown in the illustrations in this step.

STEP 3: Cut a 2 cm, a 3 cm and a 6 cm chain. Attach a 7mm jump ring and a Swarovski Pendant art. 6714 20 mm Crystal onto one end of the 2 cm long chain. Similarly attach a Swarovski Pendant art. 6714 28 mm Crystal AB and a Pendant art. 6714 20 mm Crystal AB to the 3 cm and 6 cm chains respectively.

STEP 4: Open the fi rst three jump rings in the chain created in step 2 and attach the chains with the crystals as shown in the illustrations.

STEP 5: Open a 4 mm jump ring as marked half red in the illustrations which would also help in attaching the other two jump rings marked with arrow heads around the candle stand. Place the chain around the candle stand and insert the open jump ring through the two closed jump rings and close. Cut off excess using side cutters.

CREATE YOUR STYLE with SWAROVSKI ELEMENTS Design ProjectChristmas Candle Holder “Stars”