View
5
Download
0
Category
Preview:
Citation preview
Product Description
The Axia80 is a high-performance, low-cost, six-axis sensor. It offers the highest resolution, accuracy, and stiffness available to provide a sense of touch to your application. With electronics packaged on-board, the sensor is extremely robust and has a minimal footprint. The Axia80 is available with Ethernet, EtherCAT, or Serial communication and features a high signal-to-noise ratio and high overload protection.
Product FeaturesOutstanding Reliability: Provides precise and repeatable measurements in demanding applications.
Overload Protection: Extremely rugged and durable, all transducer models can withstand high overload.
High Signal-to-Noise Ratio: Provides high resolution with low noise.
High Accuracy: Better than 2% full scale across all axes and calibrations.
Dual Calibrations: Comes with two programmed calibration ranges with the ability to switch dynamically.
Output OptionsCommunication: Ethernet, EtherCAT, or Serial RS-485
Supply Voltage: 12-30V DC
System Resolution: 16 bit
Sample Rate: Up to 8 kHz
Operating Temperature: 0-65º C
Ingress Rating: IP64 Protection from dust and splashing water.
Axia80Low-Cost Force/Torque Sensor
Axia80 Force/Torque Sensor
Axia80-M8 Axia80-M20 Axia80-M50
Loading Characteristics Fxy Fz Txyz Fxy Fz Txyz Fxy Fz Txyz
Rated Range 0 150 N 470 N 8 Nm 500 N 900 N 20 Nm 1200 N 2000 N 50 Nm
Rated Range 1 75 N 235 N 4 Nm 200 N 360 N 8 Nm 480 N 800 N 20 Nm
Overload Rating 750 N 2350 N 40 Nm 2500 N 4500 N 100 Nm 6000 N 10000 N 250 Nm
Effective Resolution 0.04 N 0.04 N 0.002 Nm 0.1 N 0.1 N 0.005 Nm 0.8 N 0.8 N 0.016 Nm
Axia80-M8 utilized in connector assembly
For detailed specifications on our entire line of Force/Torque Sensors, visit our website at www.ati-ia.com.
© Copyright by ATI Industrial Automation, Inc. 2020. All rights reserved. 9205-05-1026-06
1031 Goodworth Drive
Apex, NC 27539 USA
+1 919.772.0115
+1 919.772.8259 fax www.ati-ia.com
2X 9.204±0.025
-Z
(Note 3. )
Frame Origin
-X
+Y-Y
TOOL SIDE
+X
Sensing Reference
68.697±0.025
34.348±0.025
Customer Interface3 Slip Fit 5.2
Customer Interface5.2
30°
4 Slip Fit
Customer Interface
5.2Equally Spaced
71.12
6X M5x0.8 Tap
B.C.
2X 9.204±0.025
15°
Sensing Reference Frame Origin
+Z
Tool Side
Mounting Side
Indicator LED Location
CL6.97
To Connector
25.4
-X
+X
-Y
MOUNTING SIDE
+Y
50.2
82
Customer Interface
8.5
15°
30°
8.5
Customer InterfaceEqually Spaced
68.697±0.025
6X M5X0.8 Tap
34.348±0.025
2X 4 Slip Fit
B.C. 71.12
ISOMETRIC VIEW
Axia80 F/T SensorDrawing # 9230-05-1543-01
Recommended