View
216
Download
3
Category
Preview:
Citation preview
25 March 2016
NISSEI ASB MACHINE CO., LTD.
(TSE 1st section Code Number 6284)
ASB to Demonstrate Two High Performance
Machines & Advanced Technologies
at Chinaplas 2016
Nissei ASB Machine Co., Ltd. (Head office: Komoro-shi, Nagano-ken, President: Kota
Aoki), a world leading PET and plastics bottle stretch blow molding machine
manufacture, will exhibit at Chinaplas 2016 (Booth No. W4F41), to be held in Shanghai,
China from April 25th to 28th.
ASB will be demonstrating two of its top-line molding machines, the PF24-8B/12
1.5-step injection stretch blow molding machine and an enhanced version of its
ASB-70DPH v4 one-step injection stretch blow molding machine. In addition a range
of ASB’s specialized molding technologies and unique sample containers will be on
display.
Chinaplas 2016 Chinaplas has now become the world’s second largest plastics & rubber trade fair and is
held annually at various locations within China. In 2015 it was held at Guangzhou
where over 3,270 exhibitors took part from 39 countries and it attracted over 128,000
visitors of which over 35,000 were from 137 overseas countries and regions. In 2016
the exhibition will be held in Shanghai and is forecast to exceed 2015’s event in terms of
both exhibitors and visitors.
ASB will exhibit and announce the products below in Chinaplas 2016;
PF24-8B/12 Molding Deep Grip Pinch Type Handle
High Performance 1.5-Step Injection Stretch Blow Molding Machine
The PF24-8B/12 uses ASB’s unique and pioneering 1.5-step molding process to
injection stretch blow mold PET bottles directly from raw material in an extremely
compact space. In order to achieve the same output by alternative molding methods at
least 2-3 times the factory floor area would be required.
Additionally, by molding the preform within the same machine where the bottle is blown,
the quality and hygiene of the preform and finished bottle is of the highest possible level
making the machine ideally suited to an in-line filling operation for food products.
For increased versatility, the PF24 models can be converted at the customer’s factory
between 24 injection / 8 blow cavity molding for bottles up to 1.5 liters and 12 injection /
4 blow cavity molding for bottles up to 5 liters. By changing cavity configuration and
molds, the same PF24 model is equally at home molding lightweight water bottles at up
to 9,000bph.
At Chinaplas, the PF24-8B/12 machine will be molding a PET 1.9 liter soy sauce / edible
oil container in a 12-4 molding configuration. The container will feature a deep pinch
grip style handle that uses specially designed blow molds and advanced molding
methods to fully form the handle by blow molding alone. No handle inserter or injection
molded handle is required giving a container that is cheaper to produce, utilizes less
molding energy, is easy and comfortable to hold in the hand, and is more easy to
recycle.
Photo: PF24-8B/12 demonstrated in Chinaplas 2016
ASB-70DPH v4 Extended Daylight Model
Mid-Range One Step Injection Stretch Blow Molding Machine
The ASB-70DPH is a medium sized one-step injection stretch blow molding machine
which can produce containers from PET and other types of plastic resins in one
machine. Due to its continual development and extreme molding versatility for a wide
range of container designs and resins this is one of ASB’s best-selling series, resulting
in the sale of more than 1,700 units.
Now fitted with servo driven hydraulic pumps as standard, the machine offers extremely
low power consumption. In tests using the same molds, an energy consumption
reduction of 40% was achieved compared with the ASB-70DPH v4 standard model, and
approx. 64% reduction compared with the previous ASB-70DPH v3.
New for this exhibition, the ASB-70DPHv4 is now offered with a factory option of
extended injection clamp daylight for even greater flexibility in molding of longer
preforms as is often required when molding non-PET resins, along with an increased
capacity injection unit enabling higher shot volume. The safety door design has also
been updated with a cleaner refreshed image that gives greater access for fast mold
changing. The machine will be demonstrated molding a 700ml Copolyester (Tritan)
re-usable drinking flask in four cavities.
Photo: ASB-70DPH v4 servo pump model demonstrated in Chinaplas 2016
Photos: Containers demonstrated at Chinaplas 2016
(Left: Re-usable / Hot-fillable 700ml copolyester drink flask molded by ASB-70DPH v4,
Center & Right: PET 1.9L Soy Sauce / Edible Oil container molded by PF24-8B/12)
# # # # #
NISSEI ASB MACHINE CO., LTD.
NISSEI ASB MACHINE CO., LTD. is a major stretch blow molding machine
manufacturer for the production of plastic containers including PET bottles.
Head Office Address : 4586-3 Koo, Komoro-shi, Nagano-ken, Japan
Foundation : 8th November 1978
Employees : 1,628 staff (Consolidated: September 2015)
Capital : 3.8 billion Japanese yen
Sales : 25.4 billion Japanese yen (Consolidated accounting: September 2015)
# # # # #
Inquiries:
NISSEI ASB MACHINE CO., LTD.
Sales Coordination, Sales & Marketing Department
Mr. K. Ishiguro
4386-3 Koo, Komoro-shi, Nagano-ken, Japan 384-8585
Tel:+81 (0)267 23 1565 Fax:+81 (0)267 23 1564
E-mail: sales@nisseiasb.co.jp
URL: www.nisseiasb.co.jp
Recommended