View
221
Download
0
Category
Preview:
Citation preview
Calipers
ABSOLUTE Digimatic CalipersPages 168 to 176
ABSOLUTE Digimatic Carbon Fibre CaliperPages 177 to 181
Vernier CalipersPages 182 to 186
Dial CalipersPages 187 to 189
Special Purpose CalipersPages 190 to 219
Depth GaugesPages 220 to 230
166 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Ingress Protection (IP) Ratings
IP - Protection against solid objects and dust1x - Particles > 50.0 mm2x - Particles > 12.0 mm3x - Particles > 2.5 mm4x - Particles > 1.0 mm5x - Dust residue6x - Dust intrusion
IP - Protection against waterx1 - Dripping waterx2 - Spray water at 15°x3 - Spray water at 60°x4 - Spray water from all directionsx5 - Low pressure water jetsx6 - Floodingx7 - Immersion (15-100 cm)x8 - Complete immersion (depth of immersion 1 m)
Conventional Digital Measurement
ABSOLUTE Digimatic MeasurementAbsolutely safe, absolutely ingenious: The
ABSOLUTE systemAll Mitutoyo measuring instruments with this logo
incorporate the ingenious ABSOLUTE measurement system.
An ABSOLUTE scale only needs to be have the origin position set once, which then holds for all future measurements, no matter how often the instrument is switched off.Incremental measurements can be made at any time without losing the origin setting.
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
167
ABSOLUTE Digimatic Caliper IP67
Series 500
• Designed for use in challenging work environments.• Extremely resistant to coolants and lubricants.• Available with or without data output.
500-706-11
Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-706-11 0-150 mm flat 233 40 21 16.5 16 164 155.00500-709-11 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 155.00500-716-11 0-150 mm flat 233 40 21 16.5 16 164 199.00500-720-11 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 219.00500-707-11 0-200 mm flat 290 50 24.5 20 16 194 220.00500-717-11 0-200 mm flat 290 50 24.5 20 16 194 252.00500-708-11 0-300 mm flat 404 64 27.5 21.8 20 345 305.00500-718-11 0-300 mm flat 404 64 27.5 21.8 20 345 359.00
Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-702-10 0-150 mm flat 233 40 21 16.5 16 164 170.00500-712-10 0-150 mm flat 233 40 21 16.5 16 164 219.00500-719-10* 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 219.00500-703-10* 0-200 mm flat 290 50 24.5 20 16 194 242.00500-713-10 0-200 mm flat 290 50 24.5 20 16 194 277.00500-704-10 0-300 mm flat 404 64 27.5 21.8 20 345 335.00500-714-10* 0-300 mm flat 404 64 27.5 21.8 20 345 395.00
Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-752-10 0-150 mm/0-6" flat 233 40 21 16.5 16 164 170.00500-768-10* 0-150 mm/0-6" Ø 0.075" 233 40 21 16.5 16 164 170.00500-762-10 0-150 mm/0-6" flat 233 40 21 16.5 16 164 219.00500-769-10* 0-150 mm/0-6" Ø 0.075" 233 40 21 16.5 16 164 219.00500-753-10 0-200 mm/0-8" flat 290 50 24.5 20 16 194 242.00500-763-10 0-200 mm/0-8" flat 290 50 24.5 20 16 194 277.00500-754-10 0-300 mm/0-12" flat 404 64 27.5 21.8 20 345 335.00500-764-10 0-300 mm/0-12" flat 404 64 27.5 21.8 20 345 395.00
Functions Series 500ORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy � 200 mm/8" : ±0,02 mm/0.001"> 200 mm/8" : ±0,03 mm/0.0015"(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150,
200 mm) 10,2 mm (300 mm)Repeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 15.000 hours (150 mm ,200
mm)5.000 hours (300 mm)
Delivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
050083-10 75 mm base for depth measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Beam 150 and 200 mm or 300 mm
050083-10
168 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Carbide Caliper IP67Functions Series 500ORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy � 200 mm/8" : ±0,02 mm/0.001"> 200 mm/8" : ±0,03 mm/0.0015"(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character height 7,5 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDepth bar FlatDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
050083-10 75 mm base for depth measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Carbide-tipped jaws
Series 500
Carbide-tipped jaws• Designed for use in challenging work environments.• Extremely wear-resistant jaws. Extremely resistant to coolants and
lubricants.• Available with or without data output.
Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-721-10* 0-150 mm 233 40 21 16.5 16 168 320.00500-722-10* 0-200 mm 290 50 24.5 20 16 198 360.00
Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-727-11 0-150 mm 233 40 21 16.5 16 164 385.00500-723-10* 0-150 mm 233 40 21 16.5 16 168 415.00500-728-11 0-200 mm 290 50 24.5 20 16 194 440.00500-724-10* 0-200 mm 290 50 24.5 20 16 198 470.00
Inch/Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-731-10* 0-150 mm/0-6" 233 40 21 16.5 16 168 290.00500-735-10 0-150 mm/0-6" 233 40 21 16.5 16 168 320.00500-732-10* 0-200 mm/0-8" 290 50 24.5 20 16 198 330.00500-736-10 0-200 mm/0-8" 290 50 24.5 20 16 198 360.00
Inch/Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-733-10* 0-150 mm/0-6" 233 40 21 16.5 16 168 385.00500-737-10 0-150 mm/0-6" 233 40 21 16.5 16 168 415.00500-734-10* 0-200 mm/0-8" 290 50 24.5 20 16 198 440.00500-738-10 0-200 mm/0-8" 290 50 24.5 20 16 198 470.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
169
ABSOLUTE Digimatic Caliper
Series 500
• Standard model.• High quality guide surface finish for smooth slider movement.• Large Character Height.• Long Battery Life.
Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-180-20* 0-100 mm Ø 1,9 mm 182 40 21 16.5 16 142 180.00500-201-21 0-100 mm Ø 1,9 mm 182 40 21 16.5 16 143 190.00500-184-20 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 105.00500-203-21 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 168 132.00500-181-20 0-150 mm flat 233 40 21 16.5 16 164 105.00500-161-20 0-150 mm flat 233 40 21 16.5 16 164 132.00500-182-20 0-200 mm flat 290 50 24.5 20 16 194 162.00500-162-20 0-200 mm flat 290 50 24.5 20 16 194 188.00500-205 0-300 mm flat 404 64 27.5 22 20 350 349.00
Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-150-20 0-100 mm Ø 1,9 mm 182 40 21 16.5 16 143 209.00500-151-20 0-150 mm flat 233 40 21 16.5 16 164 145.00500-158-20 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 145.00500-152-20 0-200 mm flat 290 50 24.5 20 16 194 206.00500-153 0-300 mm flat 404 64 27.5 22 20 350 383.00
Inch/Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-191-20 0-150 mm/0-6" flat 233 40 21 16.5 16 168 105.00500-202-21 0-150 mm/0-6" flat 233 40 21 16.5 16 168 145.00500-204-21 0-200 mm/0-8" flat 290 50 24.5 20 16 198 206.00
Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-195-20* 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 16 137 199.00500-170-20 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 16 143 209.00500-196-20 0-150 mm/0-6" flat 233 40 21 16.5 16 168 115.00500-171-20 0-150 mm/0-6" flat 233 40 21 16.5 16 168 155.00500-178-20* 0-150 mm/0-6" Ø 0.075" 233 40 21 16.5 16 168 155.00500-197-20 0-200 mm/0-8" flat 290 50 24.5 20 16 198 178.00500-172-20 0-200 mm/0-8" flat 290 50 24.5 20 16 198 216.00500-193 0-300 mm/0-12" flat 404 64 27.5 22 20 350 349.00500-173 0-300 mm/0-12" flat 404 64 27.5 22 20 350 383.00
Functions Series 500ORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm
Specifications
Accuracy � 200 mm/8" : ±0,02 mm/0.001"> 200 mm/8" : ±0,03 mm/0.0015"(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 9 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
02AZD790C U-WAVE Data Cable with data switch
87.00
050083-10 75 mm base for depth measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Round depth bar type
050083-10
170 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Carbide CaliperFunctions Series 500ORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm
Specifications
Accuracy � 200 mm/8" : ±0,02 mm/0.001"> 200 mm/8" : ±0,03 mm/0.0015"(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 9 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 20.000 hoursDepth bar FlatDelivered In a case, including 1 battery
Optional accessories
No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
02AZD790C U-WAVE Data Cable with data switch
87.00
050083-10 75 mm base for depth measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Carbide-tipped jaws
050083-10
Series 500
Carbide-tipped jaws• Standard model.• High quality guide surface finish for smooth slider movement.• Large Character Height.• Long Battery Life.• Available with or without data output.
Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-233-21 0-150 mm 233 40 21 16.5 16 168 220.00500-154-20 0-150 mm 233 40 21 16.5 16 168 250.00500-235-21 0-200 mm 290 50 24.5 20 16 198 260.00500-156-20 0-200 mm 290 50 24.5 20 16 198 290.00
Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-155-20 0-150 mm 233 40 21 16.5 16 168 405.00500-157-20 0-200 mm 290 50 24.5 20 16 198 460.00
Inch/Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-159-20* 0-150 mm/0-6" 233 40 21 16.5 16 168 220.00500-174-20 0-150 mm/0-6" 233 40 21 16.5 16 168 250.00500-163-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 260.00500-176-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 290.00500-165* 0-300 mm/0-12" 404 64 27.5 22 20 350 520.00500-167* 0-300 mm/0-12" 404 64 27.5 22 20 350 550.00
Inch/Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-160-20 0-150 mm/0-6" 233 40 21 16.5 16 168 375.00500-175-20 0-150 mm/0-6" 233 40 21 16.5 16 168 405.00500-164-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 430.00500-177-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 460.00500-166 0-300 mm/0-12" 404 64 27.5 22 20 350 770.00500-168* 0-300 mm/0-12" 404 64 27.5 22 20 350 800.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
171
ABSOLUTE Digimatic Solar Caliper IP67
Series 500
• Solar powered, eco-friendly SuperCaliper needs no battery.• Operates in only 60 lux ambient lighting.• Available with or without data output.• Even if the illuminance is temporally less than 60 LUX measuring
can be performed by charging a super capacitor.
500-772
Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-772 0-150 mm flat 233 21 16.5 40 16 180 180.00500-792 0-150 mm Ø 1,9 mm 233 21 16.5 40 16 180 180.00500-778 0-150 mm flat 233 21 16.5 40 16 180 235.00500-773 0-200 mm flat 290 24.5 20 50 16 210 258.00500-779 0-200 mm flat 290 24.5 20 50 16 210 296.00
Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-774 0-150 mm flat 233 21 16.5 40 16 180 198.00500-776* 0-150 mm flat 233 21 16.5 40 16 180 259.00500-775* 0-200 mm flat 290 24.5 20 50 16 210 284.00500-777* 0-200 mm flat 290 24.5 20 50 16 210 326.00
Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-784 0-150 mm/0-6" flat 233 21 16.5 40 16 180 198.00500-786 0-150 mm/0-6" flat 233 21 16.5 40 16 180 259.00500-785* 0-200 mm/0-8" flat 290 24.5 20 50 16 210 284.00500-787* 0-200 mm/0-8" flat 290 24.5 20 50 16 210 326.00
Functions Series 500ORIGIN (ABS-Zero)
Specifications
Accuracy ±0,02 mm/0.001"(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 7,5 mmRepeatability 0,01 mmMax. slider speed UnlimitedPower Solar cellDelivered In a case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
05CZA624 Digimatic cable with data switch (1 m)
68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
050083-10
172 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Solar CaliperFunctions Series 500ORIGIN (ABS-Zero)
Specifications
Accuracy ±0,02 mm/0.001"(excluding quantizing error)
Digital step 0,01 mm/0.0005"Display LCD; Character Height 7,5 mmRepeatability 0,01 mmMax. slider speed UnlimitedPower Solar cellDelivered In a case
Optional accessories
No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
050083-10 75 mm base for depth measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
02AZD790C U-WAVE Data Cable with data switch
87.00
050083-10
Series 500
• Solar cell enables operation in only 60 lux ambient lighting.• Available with or without data output.
500-444
500-457
Metric Without thumb rollerNo. Range Depth bar L mm a mm b mm c mm Mass g Price €500-457 0-150 mm flat 233 40 21 16.5 150 135.00500-458 0-200 mm flat 290 50 24 20 180 180.00
Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm Mass g Price €500-453* 0-100 mm Ø 1,9 mm 182 40 21 16.5 125 210.00500-443 0-100 mm Ø 1,9 mm 182 40 21 16.5 145 220.00500-454* 0-150 mm flat 233 40 21 16.5 150 180.00500-444 0-150 mm flat 233 40 21 16.5 170 190.00500-455* 0-200 mm flat 290 50 24 20 180 220.00500-445 0-200 mm flat 290 50 24 20 200 230.00
Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm Mass g Price €500-473* 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 125 210.00500-463* 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 145 220.00500-474* 0-150 mm/0-6" flat 233 40 21 16.5 150 180.00500-464* 0-150 mm/0-6" flat 233 40 21 16.5 170 190.00500-475* 0-200 mm/0-8" flat 290 50 24 20 180 220.00500-465* 0-200 mm/0-8" flat 290 50 24 20 200 230.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
173
ABSOLUTE Digimatic High Capacity Caliper
Series 500
• Robust design for large measuring ranges.• SPC data output.
500-500-10
Metric
No. Range L mm a mm b mm c mm d mm Mass g Price €500-500-10 0-450 mm 630 90 47 38 25 1,170 765.00500-501-10 0-600 mm 780 90 47 38 25 1,350 830.00500-502-10 0-1000 mm 1,240 130 61 50 32 3,300 1,440.00
Inch/Metric
No. Range L mm a mm b mm c mm d mm Mass g Price €500-505-10 0-450 mm/0-18" 630 90 47 38 25 1,170 765.00500-506-10 0-600 mm/0-24" 780 90 47 38 25 1,350 830.00500-507-10 0-1000 mm/0-40" 1,240 130 61 50 32 3,700 1,440.00
Functions Series 500Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm
Specifications
Accuracy � 600 mm/24" : ±0,05 mm/0.002"� 1000 mm/40" : ±0,07 mm/0.003"(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 10 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €959149 Digimatic cable with data
switch (1 m)36.50
959143 Data-hold unit 24.00959150 Digimatic cable with data
switch (2 m)42.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
02AZD790C U-WAVE Data Cable with data switch
87.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
174 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Caliper with Nib Style Jaws Series 550
Functions 550-
203-
10up
to55
0-22
7-10
550-
301-
1055
0-31
1-10
550-
331-
1055
0-34
1-10
Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETON/OFFAuto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (200 mm)
10,2 mm (300 mm)10 mm (>300 mm)
Max. slider speed
Unlimited
Battery life approx. 3 years (200 mm), 1 year (300 mm), 3,5 years (>300 mm)
Delivered In a case, including 1 battery
Optional accessories
No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
02AZD790C U-WAVE Data Cable with data switch
87.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
Optional accessories for IP67
No. Description Price €02AZD790A Connecting cable U-Wave
with data switch92.00
05CZA624 Digimatic cable with data switch (1 m)
68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
*10 mm/0.4"
Series 550
• With rounded measuring surfaces for the measurement of inside dimensions.• SPC data output.
200/300 mm
550-301-10
Metric IP67No. Range Inside measuring from Accuracy L mm a mm b mm c mm Mass g Price €550-301-10 0-200 mm 10 mm ±0,03 mm 290 60 8 16 180 320.00550-331-10 0-300 mm 10 mm ±0,04 mm 403 75 12 20 380 385.00
Metric
No. Range Inside measuring from Accuracy L mm a mm b mm c mm Mass g Price €550-203-10 0-450 mm 20 mm ±0,05 mm 630 100 18 25 1,110 570.00550-205-10 0-600 mm 20 mm ±0,05 mm 780 100 18 25 1,290 645.00550-207-10 0-1000 mm 20 mm ±0,07 mm 1,240 140 24 32 3,350 1,100.00
Inch/Metric IP67
No. RangeInside measuring
fromAccuracy L mm a mm b mm c mm Mass g Price €
550-311-10 0-200 mm/0-8" 10,16 mm/0.4" ±0,03 mm/0.0015" 290 60 8 16 180 320.00
550-341-100-300 mm/
0-12"10,16 mm/0.4" ±0,04 mm/0.002" 403 75 12 20 380 385.00
Inch/Metric
No. RangeInside measuring
fromAccuracy L mm a mm b mm c mm Mass g Price €
550-223-10 0-450 mm/0-18" 12,7 mm/0.5" ±0,05 mm/0.002" 630 100 18 25 1,110 570.00550-225-10 0-600 mm/0-24" 12,7 mm/0.5" ±0,05 mm/0.002" 780 100 18 25 1,290 645.00
550-227-100-1000 mm/
0-40"25,4 mm/1" ±0,07 mm/0.003" 1,240 140 24 32 3,350 1,100.00
Rounded outside measuring surfaces formeasuring inside dimensions
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
175
ABSOLUTE Digimatic Caliper with Nib Style and Standard Jaws
Series 551
• With knife-shaped measuring surfaces for outside measurement and with roun-ded measuring surfaces for the measurement of inside dimensions.
• SPC data output.
200/300 mm
551-301-10
Metric IP67No. Range Inside measuring from Accuracy L mm a mm b mm c mm d mm Mass g Price €551-301-10 0-200 mm 10 mm ±0,03 mm 290 60 8 30 16 196 345.00551-331-10 0-300 mm 10 mm ±0,04 mm 403 90 10 40 20 420 385.00
Metric
No. Range Inside measuring from Accuracy L mm a mm b mm c mm d mm Mass g Price €551-204-10 0-500 mm 20 mm ±0,06 mm 680 150 18 56 25 1,060 720.00551-206-10 0-750 mm 20 mm ±0,06 mm 963 150 18 56 25 1,410 990.00551-207-10 0-1000 mm 20 mm ±0,07 mm 1,230 150 20 56 32 3,430 1,200.00
Inch/Metric IP67
No. RangeInside measur-
ing fromAccuracy L mm a mm b mm c mm d mm Mass g Price €
551-311-10*0-200 mm/
0-8"10,16 mm/0.4"
±0,03 mm/0.0015"
290 60 8 30 16 196 345.00
551-341-10*0-300 mm/
0-12"10,16 mm/0.4"
±0,04 mm/0.002"
403 90 10 40 20 420 385.00
Inch/Metric
No. RangeInside measur-
ing fromAccuracy L mm a mm b mm c mm d mm Mass g Price €
551-224-100-500 mm/
0-20"12,7 mm/0.5"
±0,06 mm/0.0025"
680 150 18 56 25 1,060 720.00
551-226-10*0-750 mm/
0-30"12,7 mm/0.5"
±0,06 mm/0.0025"
963 150 18 56 25 1,410 990.00
551-227-10*0-1000 mm/
0-40"25,4 mm/1"
±0,07 mm/0.003"
1,230 150 20 56 32 3,430 1,200.00
Round surface of jaws formeasuring inside dimensions
Series 551
Functions 551-
204-
10up
to55
1-22
7-10
551-
301-
1055
1-31
1-10
551-
331-
1055
1-34
1-10
Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETON/OFFAuto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 7.5 mm (200
mm) 10,2 mm (300 mm) 10 mm (>300 mm)
Max. slider speed
Unlimited
Battery life approx. 3 years (200 mm), 1 years (300 mm), 3,5 years (>300 mm)
Delivered In a case, including 1 battery
Optional accessories
No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
02AZD790C U-WAVE Data Cable with data switch
87.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
Optional accessories for IP67
No. Description Price €02AZD790A Connecting cable U-Wave
with data switch92.00
05CZA624 Digimatic cable with data switch (1 m)
68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
*10 mm/ 0.4"
176 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Carbon Fibre Caliper IP66Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 10 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
914055 Pair of jaws for measuring hole centre-to-centre dimensions (over 10 mm)
210.00
914057 Pair of jaws for measuring inside groove diameter (over 50 mm)
240.00
914053 Holders for special measurement jaws up to a measuring range of 600 mm
160.00
914054 Holders for special measurement jaws up to a measuring range of 1000 mm
165.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
02AZD790A Connecting cable U-Wave with data switch
92.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Optional accessories for Inch
No. Description Price €914056 Pair of jaws for measuring
hole centre-to-centre dimensions (over 0.4")
210.00
914058 Pair of jaws for measuring inside groove diameter (over 2")
240.00
* Metric Inch/Metric
� 600 mm 20 mm 0.5"
� 1000 mm 20 mm 1"
Series 552
Standard model with steel jaws• The ultra-lightweight design (with carbon fibre reinforced material) reduces total
weight by up to 50%.• Direct readout of inside measurements from the LCD (Offset value can be set easi-
ly by using the Offset button).• Preset function for setting a desired starting point.• SPC data output.
552-304-10
Metric
No. RangeInside
measur-ing from
Accuracy L mm a mm b mm c mm d mm e mm f mm Mass g Price €
552-302-10 0-450 mm 20 mm ±0,04 mm 640 100 18 41.2 91.8 25 10 715 860.00552-303-10 0-600 mm 20 mm ±0,04 mm 790 100 18 41.2 91.8 25 10 790 950.00
552-304-100-1000
mm20 mm ±0,05 mm 1,230 150 24 62.8 113.8 32 10 1,760 1,390.00
552-305-100-1500
mm20 mm ±0,09 mm 1,740 150 24 62.8 113.8 32 10 2,160 1,770.00
552-306-100-2000
mm20 mm ±0,12 mm 2,250 150 24 62.8 113.8 32 10 2,560 2,260.00
Holders for jaws � 600 mmHolders for jaws � 1000 mm
Inch/Metric
No. RangeInside
measur-ing from
Accuracy L mma
mmb
mmc mm d mm
e mm
f " Mass g Price €
552-312-100-450 mm/
0-18"12,7 mm/
0.5"±0,04 mm/
0.002"640 100 18 41.2 91.8 25 0.25 715 860.00
552-313-100-600 mm/
0-24"12,7 mm/
0.5"±0,04 mm/
0.002"790 100 18 41.2 91.8 25 0.25 790 950.00
552-314-100-1000
mm/0-40"25,4
mm/1"±0,05 mm/
0.002"1,230 150 24 62.8 113.8 32 0.5 1,760 1,390.00
552-315-100-1500
mm/0-60"25,4
mm/1"±0,09 mm/
0.004"1,740 150 24 62.8 113.8 32 0.5 2,160 1,770.00
552-316-10*0-2000
mm/0-80"25,4
mm/1"±0,12 mm/
0.005"2,250 150 24 62.8 113.8 32 0.5 2,560 2,260.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
177
ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Ceramic Jaws
Series 552
Ceramic jaws• The ultra-lightweight design (with carbon fibre reinforced material) reduces to-
tal weight by up to 50%.• Direct readout of inside measurements from the LCD (Offset value can be set easi-
ly by using the Offset button).• Preset function for setting a desired starting point.• SPC data output.
552-156-10
Metric
No. RangeInside
measur-ing from
Accuracy L mm a mm b mm c mm d mm e mm f mm Mass g Price €
552-155-100-450 mm
20 mm ±0,04 mm 640 100 18 41.2 91.8 25 10 715 1,290.00
552-156-100-600 mm
20 mm ±0,04 mm 790 100 18 41.2 91.8 25 10 790 1,400.00
Inch/Metric
No. RangeInside
measur-ing from
AccuracyL
mma
mmb
mmc mm d mm
e mm
f " Mass g Price €
552-165-10*0-450 mm/0-18"
12,7 mm/0.5"
±0,04 mm/0.002"
640 100 18 41.2 91.8 25 0.25 715 1,290.00
552-166-10*0-600 mm/0-24"
12,7 mm/0.5"
±0,04 mm/0.002"
790 100 18 41.2 91.8 25 0.25 790 1,400.00
914055 914057
Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 10 mm Max. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
914055 Pair of jaws for measuring hole centre-to-centre dimensions (over 10 mm)
210.00
914057 Pair of jaws for measuring inside groove diameter (over 50 mm)
240.00
914053 Holders for special measurement jaws up to a measuring range of 600 mm
160.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
02AZD790A Connecting cable U-Wave with data switch
92.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Optional accessories for Inch
No. Description Price €914056 Pair of jaws for measuring
hole centre-to-centre dimensions (over 0.4")
210.00
914058 Pair of jaws for measuring inside groove diameter (over 2")
240.00
914055(optional)
914057(optional)* Metric: 20 mm/ Inch/Metric 0.5"
178 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Extra Long Jaws
Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 10 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
02AZD790A Connecting cable U-Wave with data switch
92.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
* metric inch/metric
� 600 mm 20 mm 0.5"
� 1000 mm 20 mm 1"
Series 552
• The ultra-lightweight design (with carbon fibre reinforced material) reduces to-tal weight by up to 50%.
• Direct readout of inside measurements from the LCD (Offset value can be set easi-ly by using the Offset button).
• Preset function for setting a desired starting point.• SPC data output.
552-151-10
Metric
No. RangeInside
measur-ing from
Accuracy A mmC
mmD mm E mm F mm
G mm
H mm
Mass g Price €
552-150-100-450 mm
20 mm±0,06 mm
680 89 91.8 65.5 173 25 8 1,215 1,290.00
552-151-100-600 mm
20 mm±0,06 mm
830 89 91.8 65.5 173 25 8 1,290 1,400.00
552-152-100-1000
mm20 mm
±0,07 mm
1,280 110 113.8 73 170.5 32 12 2,090 1,800.00
552-153-100-1500
mm20 mm
±0,11 mm
1,790 110 113.8 73 170.5 32 12 2,490 2,330.00
552-154-100-2000
mm20 mm
±0,14 mm
2,300 110 113.8 73 170.5 32 12 2,890 2,930.00
Inch/Metric
No. RangeInside
measur-ing from
Accuracy A mmC
mmD mm
E mm
F mmG
mmH
mmMass
gPrice €
552-160-100-450 mm/0-18"
12,7 mm/0.5"
±0,06 mm/0.0025"
680 89 91.8 65.5 173 25 8 1,215 1,290.00
552-161-10*0-600 mm/0-24"
12,7 mm/0.5"
±0,06 mm/0.0025"
830 89 91.8 65.5 173 25 8 1,290 1,400.00
552-162-10*0-1000
mm/0-40"
25,4 mm/1"
±0,07 mm/0.003"
1,280 110 113.8 73 170.5 32 12 2,090 1,800.00
552-163-10*0-1500
mm/0-60"
25,4 mm/1"
±0,11 mm/0.0045"
1,790 110 113.8 73 170.5 32 12 2,490 2,330.00
552-164-10*0-2000
mm/0-80"
25,4 mm/1"
±0,14 mm/0.0055"
2,300 110 113.8 73 170.5 32 12 2,890 2,930.00
B = 10 mm
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
179
ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Interchangeable Jaws/ Scriber
Series 552
Optional interchangeable jaws• The ultra-lightweight design (with carbon fibre reinforced materi-
al) reduces total weight by up to 50%.• Direct readout of inside measurements from the LCD (Offset value
can be set easily by using the Offset button).• Preset function for setting a desired starting point.• SPC data output.
552-182-10with optional
accessories
Metric
No. Range Accuracy L mm c mm d mm e mm Mass g Price €552-181-10 0-450 mm ±0,04 mm 640 41.2 91.8 25 650 999.00552-182-10 0-600 mm ±0,04 mm 790 41.2 91.8 25 725 1,120.00552-183-10 0-1000 mm ±0,05 mm 1,230 62.8 113.8 32 1,480 1,650.00552-184-10 0-1500 mm ±0,09 mm 1,740 62.8 113.8 32 1,880 2,120.00552-185-10 0-2000 mm ±0,12 mm 2,250 62.8 113.8 32 2,280 2,680.00
Accuracy: without jaws
Inch/Metric
No. Range Accuracy L mm c mm d mm e mm Mass g Price €552-191-10 0-450 mm/0-18" ±0,04 mm/0.002" 640 41.2 91.8 25 650 999.00552-192-10* 0-600 mm/0-24" ±0,04 mm/0.002" 790 41.2 91.8 25 725 1,120.00552-193-10* 0-1000 mm/0-40" ±0,05 mm/0.002" 1,230 62.8 113.8 32 1,480 1,650.00552-194-10* 0-1500 mm/0-60" ±0,09 mm/0.004" 1,740 62.8 113.8 32 1,880 2,120.00552-195-10* 0-2000 mm/0-80" ±0,12 mm/0.005" 2,250 62.8 113.8 32 2,280 2,680.00
Accuracy: without jaws
Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSETPRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm
Specifications
Accuracy Refer to the list of specifications (excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 10 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery
Standard accessories
No. Description05GZA033 Scriber clamp (9 x 9 mm)
Optional accessories
No. Description Price €06ADV380A USB Input Tool Direct cable
(2 m)110.00
05CZA624 Digimatic cable with data switch (1 m)
68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
07CZA056 Exchangeable measuring tips 281.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
05GZA033
180 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Interchangeable Jaws/ Scriber
Surface plate type
Inside point type
Scriber type
Series 552
Interchangeable jaws (optional)
Standard type Centreline type
Surface plate type Inside point type Scriber type
No. Type A B Mass g Price €07CZA056 Standard (pair) 28 mm 30 mm 90.6 281.0007CZA057 Centreline (pair) 30 mm 30 mm 119.6 346.0007CZA060* Centreline (pair) 1.2" 1.2" 119.6 346.0007CZA044 Surface plate (1 piece) 90 mm/3.5" 28 mm/1.1" 191.3 243.5007CZA058 Inside point (pair) 25 mm 50 mm 98.8 325.0007CZA059* Inside point (pair) 1" 2" 98.8 325.0007CZA055 Scriber (pair) 8 mm 30 mm 63.2 303.0007CZA061* Scriber (pair) 0.31" 1.2" 63.2 303.00
Standard type Centreline type
Surface plate type Inside point type Scriber type
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
181
Vernier Caliper
Series 530
• Standard type• Main scale and vernier scale satin chrome finished for high readability.• Raised sliding surfaces.
530-122
Metric Graduation 0,05 mmNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-100* 0-100 mm Ø 1,9 mm ±0,05 mm 182 40 21.5 17 16 128 44.50530-102 0-150 mm Ø 1,9 mm ±0,05 mm 229 40 21 17 16 144 41.50530-101 0-150 mm flat ±0,05 mm 229 40 21 17 16 143 27.50530-108 0-200 mm flat ±0,05 mm 288 50 24.5 20.5 16 180 71.50530-109 0-300 mm flat ±0,08 mm 404 64 27.5 22 20 355 173.00530-501 0-600 mm without ±0,10 mm 780 90 47 38 25 1,300 530.00530-502* 0-1000 mm without ±0,15 mm 1,240 130 60 50 32 3,300 1,030.00
Metric Graduation 0,02 mmNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-122 0-150 mm flat ±0,03 mm 229 40 21 17 16 143 32.50530-123 0-200 mm flat ±0,03 mm 288 50 24.5 20.5 16 180 54.00530-124 0-300 mm flat ±0,04 mm 404 64 27.5 22 20 355 173.00
Metric/Inch Graduation 0,02 mm-1/1000"No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-312 0-150 mm/0-6" flat ±0,03 mm/0.0015" 229 40 21 17 16 143 53.00530-118 0-200 mm/0-8" flat ±0,03 mm/0.0015" 288 50 24.5 20.5 16 180 76.50530-119 0-300 mm/0-12" flat ±0,04 mm/0.002" 404 64 27.5 22 20 355 190.00
Metric/Inch Graduation 0,05 mm-1/128"No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-104 0-150 mm/0-6" flat ±0,05 mm/0.002" 229 40 21 17 16 143 28.50530-316 0-150 mm/0-6" flat ±0,05 mm/0.002" 229 40 21 17 16 145 44.00530-114 0-200 mm/0-8" flat ±0,05 mm/0.002" 288 50 24.5 20.5 16 180 71.50530-115 0-300 mm/0-12" flat ±0,08 mm/0.003" 404 64 27.5 22 20 355 173.00
Inch Graduation 1/128"No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-105 0-6" flat ±0.002" 229 40 21 17 16 143 45.00530-116 0-8" flat ±0.002" 229 40 21 17 16 180 71.50
Specifications
Accuracy Refer to the list of specificationsDelivered In a case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
530-316Clamping screw below the slider
530-104with metric/inch graduation
Easy reading due to vernier scales inclinedby 14 degrees
530-316 only
182 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Vernier Caliper with Carbide tipped JawsSpecifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Carbide-tipped measuring surfaces
Series 530
• Main scale and vernier scale satin chrome finished for high readability.• Raised sliding surfaces
530-320
Metric Carbide-tipped jaws for outside measurementNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-320 0-150 mm flat ±0,05 mm 229 40 21 17 16 145 110.00530-321 0-200 mm flat ±0,05 mm 288 50 24.5 20.5 16 181 140.00530-322 0-300 mm flat ±0,08 mm 404 64 27.5 22 20 355 305.00
Metric Carbide-tipped jaws for outside/inside measurementNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-335 0-150 mm flat ±0,05 mm 229 40 21 17 16 145 173.00
Easy reading due tovernier scales inclined
by 14 degrees
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
183
Vernier Caliper with thumb clamp
Series 531
• The slider moves only when the spring-loaded thumb grip is depressed.
531-122
Metric
No. Range Depth bar Accuracy Graduation L mm a mm b mm c mm d mm Mass g Price €531-101 0-150 mm flat ±0,05 mm 0,05 mm 229 40 21.5 17 16 142 32.00531-102* 0-200 mm flat ±0,05 mm 0,05 mm 288 50 25 20.5 16 175 80.00531-103* 0-300 mm flat ±0,08 mm 0,05 mm 403 64 27.5 22 20 360 185.00
Metric/Inch
No. RangeDepth
barAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €
531-1220-150 mm/
0-6"flat
±0,05 mm/0.002"
0,05 mm-1/128"
229 40 21.5 17 16 142 33.50
531-1080-200 mm/
0-8"flat
±0,05 mm/0.002"
0,05 mm-1/128"
288 50 25 20.5 16 175 80.00
531-1090-300 mm/
0-12"flat
±0,08 mm/0.003"
0,05 mm-1/128"
403 64 27.5 22 20 360 185.00
Metric/Inch High accuracy model
No. RangeDepth
barAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €
531-1280-150 mm/
0-6"flat
±0,03 mm/0.0015"
0,02 mm-0.001"
229 40 21.5 17 16 142 49.00
531-1290-200 mm/
0-8"flat
±0,03 mm/0.0015"
0,02 mm-0.001"
288 50 25 20.5 16 175 84.00
531-1120-300 mm/
0-12"flat
±0,04 mm/0.002"
0,02 mm-0.001"
403 64 27.5 22 20 360 190.00
Easy reading due tovernier scales inclined
by 14 degrees
Specifications
Accuracy Refer to the list of specificationsDelivered In a case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
531-122 only
184 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Vernier Caliper with fine adjustmentSpecifications
Accuracy Refer to the list of specificationsGraduation 0,02 mm or 0,02 mm/0.001"Delivered In soft case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Series 532
• Can measure outside and inside diameter (OD and ID), depth, and steps.
532-119
Metric
No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €532-101 0-130 mm flat ±0,03 mm 229 40 21.5 17 16 165 81.00532-102 0-180 mm flat ±0,03 mm 288 50 25 20.5 16 202 107.00532-103 0-280 mm flat ±0,04 mm 403 64 27.5 22 20 395 245.00
Metric/Inch
No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €532-119 0-130 mm/0-5" flat ±0,03 mm/0.0015" 229 40 21.5 17 16 165 81.00532-120 0-180 mm/0-7" flat ±0,03 mm/0.0015" 288 50 25 20.5 16 202 107.00532-121 0-280 mm/0-11" flat ±0,04 mm/0.002" 404 64 27.5 22 20 395 245.00
Easy reading due tovernier scales inclinedby 14 degrees
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
185
Left-Handed Vernier Caliper
Series 536
• Parallax-free vernier scales for easy and positive measurement.
536-310
Metric
No. Range Depth bar Accuracy Jaw length mm Mass g Price €536-310 0-150 mm flat ±0,05 mm 40 150 115.00
Specifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Reading free from parallax errors
186 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Dial CaliperSpecifications
Accuracy Refer to the list of specificationsDepth bar flatDelivered In a case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Titanium coating
Metric type:Dial plate golden
Series 505
• With golden dial plate.• A titanium coating is applied to the sliding surfaces to enhance the durability.
505-683
505-688
Metric
No. Range Accuracy GraduationSliding
titanium coated
L mm a mm b mm c mm d mm Mass g Price €
505-683* 0-150 mm ±0,03 mm0,02 mm,2 mm/rev
231 40 21 16.5 16 175 90.00
505-685 0-150 mm ±0,02 mm0,01 mm,1 mm/rev
231 40 21 16.5 16 176 105.00
505-688 0-150 mm (1) ±0,02 mm0,01 mm,1 mm/rev
231 40 21 16.5 16 176 105.00
505-684* 0-200 mm ±0,03 mm0,02 mm,2 mm/rev
288 50 24.5 20 16 185 185.00
505-686 0-200 mm ±0,03 mm0,01 mm,1 mm/rev
288 50 24.5 20 16 186 200.00
(*) Without thumb roller
L
b c
a
d
e
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
187
Dial Caliper
Series 505
• With yellow of white dial plate.• Titanium coating is applied to the sliding surfaces to enhance durability (except
for 0-300 mm and 0-12" model).
505-671
505-673
Metric
No. Range Accuracy GraduationSliding
titanium coated
L mm a mm b mm c mm d mm Mass g Price €
505-680* 0-100 mm ±0,015 mm0,01 mm,1 mm/rev
180 40 21 16.5 16 151 135.00
505-671 0-150 mm ±0,03 mm0,02 mm,2 mm/rev
231 40 21 16.5 16 175 90.00
505-681 0-150 mm ±0,02 mm0,01 mm,1 mm/rev
231 40 21 16.5 16 176 105.00
505-672 0-200 mm ±0,03 mm0,02 mm,2 mm/rev
288 50 24.5 20 16 185 185.00
505-682 0-200 mm ±0,03 mm0,01 mm,1 mm/rev
288 50 24.5 20 16 186 200.00
505-673 0-300 mm ±0,04 mm0,02 mm,2 mm/rev
403 64 27.5 22 20 370 280.00
Inch
No. Range Accuracy GraduationSliding
titanium coat-ed
L mm a mm b mm c mm d mm Mass g Price €
505-674* 0-4" ±0.001" 0.001", 0.1"/rev 180 40 21 16.5 16 150 135.00505-675 0-6" ±0.001" 0.001", 0.1"/rev 231 40 21 16.5 16 175 90.00505-717* 0-6" ±0.001" 0.001", 0.2"/rev 231 40 21 16.5 16 175 90.00505-676* 0-8" ±0.002" 0.001", 0.1"/rev 288 50 24.5 20 16 185 185.00505-719* 0-8" ±0.001" 0.001", 0.2"/rev 288 50 24.5 20 16 185 185.00505-677* 0-12" ±0.002" 0.001", 0.1"/rev 403 64 27.5 22 20 370 280.00505-720 0-12" ±0.002" 0.001", 0.2"/rev 403 64 27.5 22 20 370 280.00
Functions Series 505Thumb rollerDepth barLocking screw
Specifications
Accuracy Refer to the list of specificationsDelivered In a case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Titanium coating
Metric type:dial plate yellow
Inch type:diale plate white
188 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Dial Caliper with Carbide tipped JawsFunctions Series 505Thumb rollerDepth barLocking screw
Specifications
Accuracy Refer to the list of specificationsDelivered In a case
Optional accessories
No. Description Price €050083-10 75 mm base for depth
measurementfor models up to 200 mm
43.00
050084-10 100 mm base for depth measurementfor models up to 200 mm
48.50
050085-10 125 mm base for depth measurementfor 300 mm models
55.00
Carbide-tipped jaws
Titanium coating
Metric type:dial plate yellow
Inch type:dial plate white
Series 505
• A titanium coating is applied to the sliding surfaces to enhance durability (except for 0-12" model).
505-711
Metric Carbide-tipped jaws for outside measurement
No. Range Accuracy GraduationSliding
titanium coat-ed
L mm a mm b mm c mm d mm Mass g Price €
505-707* 0-150 mm ±0,03 mm0,02 mm,2 mm/rev
231 40 21 16.5 16 175 265.00
Metric Carbide-tipped jaws for outside/inside measurement
No. Range Accuracy GraduationSliding
titanium coatedL mm a mm b mm c mm d mm Mass g Price €
505-711 0-150 mm ±0,03 mm0,02 mm,2 mm/rev
231 40 21 16.5 16 175 320.00
Inch Carbide-tipped jaws for outside measurement
No. Range Accuracy GraduationSliding
titanium coat-ed
L mm a mm b mm c mm d mm Mass g Price €
505-708* 0-6" ±0.001" 0.001", 0.1"/rev 231 40 21 16.5 16 175 265.00505-709* 0-8" ±0.002" 0.001", 0.1"/rev 288 50 24.5 20 16 185 365.00505-710* 0-12" ±0.002" 0.001", 0.1"/rev 403 64 27.5 22 20 370 475.00505-721* 0-12" ±0.002" 0.001", 0.2"/rev 403 64 27.5 22 20 370 475.00
Inch Carbide-tipped jaws for outside/inside measurement
No. Range Accuracy GraduationSliding
titanium coat-ed
L mm a mm b mm c mm d mm Mass g Price €
505-712* 0-6" ±0.001" 0.001", 0.1"/rev 231 40 21 16.5 16 175 320.00505-713* 0-8" ±0.002" 0.001"; 0.1"/rev 228 50 24.5 20 16 185 420.00505-714* 0-12" ±0.002" 0.001", 0.1"/rev 403 64 27.5 22 20 370 695.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
189
Metric Vernier Caliper with Nib Style and Standard jaws
Series 533
• Inside and outside measurements can be read directly from the upper and lower vernier scales.
With fine adjustment
Without fine adjustment
Metric With fine adjustment
No. RangeInside measur-
ing fromAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €
533-504 0-500 mm 20 mm ±0,05 mm 0,02 mm 680 150 15 56 25 1,250 560.00533-505 0-750 mm 20 mm ±0,07 mm 0,02 mm 963 150 15 56 25 1,550 815.00533-506 0-1000 mm 20 mm ±0,08 mm 0,02 mm 1,230 150 20 56 32 3,450 980.00
Metric Without fine adjustment
No. RangeInside measur-
ing fromAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €
533-404 0-500 mm 20 mm ±0,10 mm 0,05 mm 680 150 15 56 25 1,200 510.00533-405 0-750 mm 20 mm ±0,12 mm 0,05 mm 963 150 15 56 25 1,500 715.00533-406 0-1000 mm 20 mm ±0,15 mm 0,05 mm 1,230 150 20 56 32 3,300 865.00
Specifications
Accuracy Refer to the list of specificationsDelivered In a case
Round surface of jaws formeasuring inside dimensions
190 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Metric Vernier Caliper with Nib Style JawsSpecifications
Accuracy Refer to the list of specificationsNote Up to 300 mm: parallax-free design
Rounded outside measuring surfaces formeasuring inside dimensions
Series 160
With or without fine adjustment• With top offset vernier scale to enable direct reading of inside dimensions without having to
add the jaw blade width.
160-101
160-127
Metric With fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €160-128 0-450 mm 20 mm ±0,05 mm 0,02 mm 500.00160-101 0-600 mm 20 mm ±0,05 mm 0,02 mm 570.00160-104 0-1000 mm 20 mm ±0,07 mm 0,02 mm 1,050.00160-110 0-1500 mm 20 mm ±0,10 mm 0,02 mm 2,150.00160-113 0-2000 mm 20 mm ±0,12 mm 0,02 mm 3,050.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-128 630 125 100 18 25 14.8 6 10 1,200160-101 780 125 100 18 25 14.8 6 10 1,400160-104 1,240 172 140 24 32 17 10 10 3,500160-110 1,800 212 180 30 32 19 10 10 4,850160-113 2,300 220 180 30 40 23 12 10 10,300
Metric Without fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €160-130* 0-450 mm 20 mm ±0,10 mm 0,05 mm 500.00160-131* 0-600 mm 20 mm ±0,10 mm 0,05 mm 570.00160-132* 0-1000 mm 20 mm ±0,15 mm 0,05 mm 1,050.00160-133* 0-1500 mm 20 mm ±0,22 mm 0,05 mm 2,150.00160-134* 0-2000 mm 20 mm ±0,28 mm 0,05 mm 3,050.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-130* 630 125 100 18 25 14.8 6 10 1,100160-131* 780 125 100 18 25 14.8 6 10 1,300160-132* 1,240 172 140 24 32 17 10 10 3,300160-133* 1,800 212 180 30 32 19 10 10 4,700160-134* 2,300 220 180 30 40 23 12 10 9,900
L
R
d
cf
e
b
a
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
191
Inch/Metric Vernier Caliper with Nib Style Jaws
Series 160
With fine adjustment• With top offset vernier scale to enable direct reading of inside dimensions without having to
add the jaw blade width.
160-151
Metric/Inch
No. Range Inside measuring from Accuracy Graduation Price €160-150 0-300 mm/0-12" 10 mm/0.394" ±0,04 mm/0.0015" 0,02 mm/0.001" 315.00160-151 0-450 mm/0-18" 20 mm/0.787" ±0,05 mm/0.002" 0,02 mm/0.001" 500.00160-153 0-600 mm/0-24" 20 mm/0.787" ±0,05 mm/0.002" 0,02 mm/0.001" 570.00160-155 0-1000 mm/0-40" 20 mm/0.787" ±0,07 mm/0.003" 0,02 mm/0.001" 1,050.00160-157 0-1500 mm/0-60" 20 mm/0.787" ±0,10 mm/0.004" 0,02 mm/0.001" 2,150.00160-159 0-2000 mm/0-80" 20 mm/0.787" ±0,12 mm/0.005" 0,02 mm/0.001" 3,050.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-150 445 95 25 12 20 10 3.8 5 450160-151 630 125 100 18 25 14.8 6 10 1,200160-153 780 125 100 18 25 14.8 6 10 1,400160-155 1,240 172 140 24 32 17 10 10 3,500160-157 1,800 212 180 30 32 19 10 10 4,850160-159 2,300 220 180 30 40 23 12 10 10,200
Inch/Metric
No. Range Inside measuring from Accuracy Graduation Price €160-125 0-300 mm/0-12" 7,62 mm/0.3" ±0,04 mm/0.0015" 0,02 mm/0.001" 315.00160-119 0-450 mm/0-18" 12,7 mm/0.5" ±0,05 mm/0.002" 0,02 mm/0.001" 500.00160-103 0-600 mm/0-24" 12,7 mm/0.5" ±0,05 mm/0.002" 0,02 mm/0.001" 570.00160-106 0-1000 mm/0-40" 25,4 mm/1" ±0,07 mm/0.003" 0,02 mm/0.001" 1,050.00160-112 0-1500 mm/0-60" 25,4 mm/1" ±0,10 mm/0.004" 0,02 mm/0.001" 2,150.00160-115 0-2000 mm/0-80" 25,4 mm/1" ±0,12 mm/0.005" 0,02 mm/0.001" 3,050.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-125 445 95 25 12 20 10 3.8 5 450160-119 630 125 100 18 25 14.8 6 10 1,200160-103 780 125 100 18 25 14.8 6 10 1,400160-106 1,240 172 140 24 32 17 10 10 3,500160-112 1,800 212 180 30 32 19 10 10 4,850160-115 2,300 220 180 30 40 23 12 10 10,200
L
R
d
cf
e
b
a
Specifications
Accuracy Refer to the list of specificationsNote Up to 300 mm/12": parallax-free design
Rounded outside measuring surfaces formeasuring inside dimensions
192 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Inch Vernier Caliper with Nib Style JawsSpecifications
Accuracy Refer to the list of specificationsGraduation 0.001"Note Up to 12" : parallax-free design
Rounded outside measuring surfaces formeasuring inside dimensions
Series 160
With fine adjustment• With top offset vernier scale to enable direct reading of inside dimensions without having to
add the jaw blade width.
Inch
No. Range Inside measuring from Accuracy L mm Price €160-124* 0-12" 0.3" ±0.0015" 445 315.00160-116* 0-18" 0.5" ±0.002" 630 500.00160-102* 0-24" 0.5" ±0.002" 780 570.00160-105* 0-40" 1" ±0.003" 1,240 1,050.00160-111* 0-60" 1" ±0.004" 1,800 2,150.00160-114* 0-80" 1" ±0.005" 2,300 3,050.00
No. a mm b mm c mm d mm e mm f mm R mm Mass g160-124* 95 25 12 20 10 3.8 5 450160-116* 125 100 18 25 14.8 6 10 1,200160-102* 125 100 18 25 14.8 6 10 1,400160-105* 172 140 24 32 17 10 10 3,500160-111* 212 180 30 32 19 10 10 4,850160-114* 220 180 30 40 23 12 10 10,200
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
193
Metric and Inch Vernier Caliper with Long Jaws
Series 534
With or without fine adjustment• Long jaws for measuring hard-to-reach workpiece features.• With top offset vernier scale to enable direct reading of inside, dimensions without having to
add the jaw blade width.
534-110
Metric Without fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €534-109* 0-300 mm 10 mm ±0,07 mm 0,05 mm 268.00534-110* 0-500 mm 20 mm ±0,13 mm 0,05 mm 635.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-109* 445 110 90 12 20 7 3.8 5 400534-110* 682 225 200 18.5 25 12 6 10 1,400
Metric With fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €534-113 0-300 mm 10 mm ±0,04 mm 0,02 mm 282.00534-114 0-500 mm 20 mm ±0,06 mm 0,02 mm 668.00534-115 0-750 mm 20 mm ±0,08 mm 0,02 mm 860.00534-116 0-1000 mm 20 mm ±0,10 mm 0,02 mm 1,120.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-113 445 110 90 12 20 7 3.8 5 460534-114 682 225 200 18.5 25 12 6 10 1,500534-115 995 232 200 18.5 32 12 8 10 2,900534-116 1,230 232 200 18.5 32 12 8 10 3,500
Inch With fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €534-117* 0-12" 0.3" ±0.002" 0.001" 282.00534-118* 0-20" 0.8" ±0.003" 0.001" 668.00534-119* 0-30" 0.8" ±0.004" 0.001" 860.00534-120* 0-40" 0.8" ±0.004" 0.001" 1,120.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-117* 445 110 90 12 20 7 3.8 5 1,100534-118* 682 225 200 18.5 25 12 6 10 3,500534-119* 995 232 200 18.5 32 12 8 10 8,500534-120* 1,230 232 200 18.5 32 12 8 10 10,000
Specifications
Accuracy Refer to the list of specifications
Rounded outside measuring surfaces formeasuring inside dimensions
L
d
cf
e
R
b
a
194 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Metric/Inch Vernier Caliper with Long JawsSpecifications
Accuracy Refer to the list of specifications
Rounded outside measuring surfaces formeasuring inside dimensions
Series 534
With fine adjustment• Long jaws for measuring hard-to-reach workpiece features.
534-102
Metric/Inch
No. Range Inside measuring from Accuracy Graduation Price €534-101 0-300 mm/0-12" 10 mm/0.394" ±0,07 mm/0.0027" 0,05 mm-1/128" 260.00534-105 0-300 mm/0-12" 10 mm/0.394" ±0,04 mm/0.0015" 0,02 mm/0.001" 282.00534-102 0-500 mm/0-20" 20 mm/0.787" ±0,13 mm/0.005" 0,05 mm-1/128" 575.00534-106 0-500 mm/0-20" 20 mm/0.787" ±0,06 mm/0.0025" 0,02 mm/0.001" 668.00534-103 0-750 mm/0-30" 20 mm/0.787" ±0,16 mm/0.0064" 0,05 mm-1/128" 790.00534-107 0-750 mm/0-30" 20 mm/0.787" ±0,08 mm/0.003" 0,02 mm/0.001" 860.00534-104 0-1000 mm/0-40" 20 mm/0.787" ±0,20 mm/0.008" 0,05 mm-1/128" 965.00534-108 0-1000 mm/0-40" 20 mm/0.787" ±0,10 mm/0.004" 0,02 mm/0.001" 1,120.00
No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-101 445 110 90 12 20 7 3.8 5 400534-105 445 110 90 12 20 7 3.8 5 400534-102 682 225 200 18.5 25 12 6 10 1,500534-106 682 225 200 18.5 25 12 6 10 1,500534-103 995 232 200 18.5 32 12 8 10 2,900534-107 995 232 200 18.5 32 12 8 10 2,900534-104 1,230 232 200 18.5 32 12 8 10 3,500534-108 1,230 232 200 18.5 32 12 8 10 3,500
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
195
ABSOLUTE Digimatic Caliper with constant measuring force
Series 573
• Due to the low and constant measuring force these calipers are ideal for measur-ing elastic workpieces such as plastic parts and rubber parts that standard cali-pers cannot measure accurately.
573-191-20
Metric
No. Range Accuracy Mass g Price €573-191-20 0-180 mm ±0,05 mm 253 860.00
Inch/Metric
No. Range Accuracy Mass g Price €573-291-20* 0-180 mm/0-7" ±0,05 mm/0.002" 253 860.00
Functions Series 573Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 9 mmJaw retraction 0,3 mmMeasuring force 0,5 - 1 NMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
959143 Data-hold unit 24.0002AZD790C U-WAVE Data Cable with
data switch87.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
A consistently low measuring force can be guaranteed by only taking measurements when the pointer is between the two fiducial lines.Measurement procedure
196 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Caliper for tolerance measurement
Functions Series 573Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm
Specifications
Accuracy ±0,02 mm or 0,02 mm/0.001"Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character height 9 mmRepeatability 0,01 mmJaw retraction 2 mmMeasuring force 7 - 14 NMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
959143 Data-hold unit 24.0002AZD790C U-WAVE Data Cable with
data switch87.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Series 573
• The ABSOLUTE Digimatic snap caliper features a spring-loaded mechanism to allow quick and efficient GO/±NO-GO inspection for mass produced parts.
573-182-20
Metric
No. Range L mm a mm b mm c mm d mm Mass g Price €573-181-20* 0-100 mm 233 40 21 16.5 16 213 340.00573-182-20 0-150 mm 290 50 24.5 20 16 233 390.00
Inch/Metric
No. Range L mm a mm b mm c mm d mm Mass g Price €573-281-20* 0-100 mm/0-4" 233 40 21 16.5 16 213 340.00573-282-20* 0-150 mm/0-6" 290 50 24.5 20 16 233 390.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
197
Carbide Scribing Caliper
Series 573
ABSOLUTE Digimatic Caliper• The carbide-tipped jaws facilitate fine scribing on workpiece.• With depth bar.• SPC data output.
573-676
Metric
No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €573-676 0-150 mm ±0,02 mm 229 46 21.5 17 16 33 166 295.00573-677 0-200 mm ±0,02 mm 288 50 25 20.5 16 43 196 385.00573-679 0-300 mm ±0,03 mm 403 64 27.5 22 20 54 345 870.00
Functions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150,
200 mm) 10,2 mm (300 mm)Max. slider speed
Unlimited
Battery life 15.000 hours (150 mm, 200 mm) 5.000 hours (300 mm)
Delivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Sample application
198 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Carbide Scribing CaliperSpecifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Series 536
Vernier Caliper• The carbide-tipped jaws facilitate fine scribing on workpiece.
536-221
Metric
No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-221 0-150 mm ±0,05 mm 229 40 21.5 17 16 33 150 129.00536-222 0-200 mm ±0,05 mm 288 50 25 20.5 16 43 180 156.00536-223 0-300 mm ±0,08 mm 403 64 27.5 22 20 54 400 332.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
199
Offset Caliper
Series 573
Absolute Digimatic Caliper• Absolute Digimatic Caliper.• The beam-mounted jaw can be adjusted to facilitate measurement of stepped
sections and hard-to-reach workpiece features.
573-601
Metric With thumb rollerNo. Range Accuracy a mm b mm c mm d mm Mass g Price €573-601* 0-150 mm ±0,02 mm 95 10 40 30 168 560.00573-604* 0-300 mm ±0,03 mm 135 15 64 51 350 770.00
Metric Without thumb rollerNo. Range Accuracy a mm b mm c mm d mm Mass g Price €573-611 0-150 mm ±0,02 mm 95 10 40 30 168 510.00573-612 0-200 mm ±0,02 mm 95 10 50 38.5 198 570.00573-614 0-300 mm ±0,03 mm 135 15 64 51 350 720.00
Inch/Metric With thumb rollerNo. Range Accuracy a mm b mm c mm d mm Mass g Price €573-701 0-150 mm/0-6" ±0,03 mm/0.001" 95 10 40 30 168 560.00573-704* 0-300 mm/0-12" ±0,04 mm/0.0015" 135 15 64 51 350 770.00
Functions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specfications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150
mm, 200 mm) 10,2 mm (300 mm)Max. slider speed
Unlimited
Battery life approx. 15.000 hours (150 mm, 200 mm) 5.000 hours (300 mm)
Delivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
a
b
c
d
200 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Offset CaliperSpecifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Series 536
Vernier Caliper• The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-
to-reach workpiece features.
536-101
Metric
No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-101 0-150 mm ±0,05 mm 229 95 40 10 16 7.5 150 244.00536-102 0-200 mm ±0,05 mm 286 95 50 10 16 8.5 200 296.00536-103 0-300 mm ±0,08 mm 403 135 64 15 20 12 400 396.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
201
Offset Centreline Caliper
Series 573
Absolute Digimatic Caliper• Specially designed for hole centre-to-centre measurements in the
same plane, or between offset planes. • Can also measure from an edge to a hole centre.• Hole diameter should be in the range 1,5 mm-10 mm (0.06"-0.4").
573-615
Metric With thumb rollerNo. Range Accuracy a mm t mm Mass g Price €573-605* 10-160 mm ±0,03 mm 75 3 157 530.00573-606* 10-210 mm ±0,03 mm 75 3 177 590.00573-608* 10-310 mm ±0,04 mm 100 3.8 320 770.00
Metric Without thumb rollerNo. Range Accuracy a mm t mm Mass g Price €573-615 10-160 mm ±0,03 mm 75 3 157 480.00573-616 10-210 mm ±0,03 mm 75 3 177 540.00573-618 10-310 mm ±0,04 mm 100 3.8 320 720.00
Inch/Metric With thumb rollerNo. Range Accuracy a mm t mm Mass g Price €573-705* 10-160 mm/0.4-6.4" ±0,04 mm/0.0015" 75 3.5 157 530.00573-706 10-210 mm/0.4-8.4" ±0,04 mm/0.0015" 75 3.5 177 590.00573-708* 10-310 mm/0.4-12.4" ±0,04 mm/0.0015" 100 3.8 320 770.00
Functions Series 573Data outputORIGIN (ABS-Zero)OFFSET*PRESETAuto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150
mm, 200 mm) 10,2 (300 mm)Max. slider speed
Unlimited
Battery life approx. 15.000 hours (150 mm , 200 mm) 5.000 hours (300 mm)
Delivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
mma
10
30 10
ø1
t
* 10 mm
202 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Offset Centreline CaliperSpecifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Series 536
Vernier-caliper• Specially designed for hole centre-to-centre measurements in the same plane, or between offset
planes. • Can also measure from an edge to a hole centre.• Hole diameter should be in the range 1,5 mm-10 mm (0.06"-0.4").
536-106
Metric
No. Range Accuracy L mm a mm d mm t mm Mass g Price €536-105 10-150 mm ±0,05 mm 229 75 16 3 140 328.00536-106 10-200 mm ±0,05 mm 282 75 16 3 160 383.00536-107 10-300 mm ±0,08 mm 383 100 20 3.8 320 462.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
203
Edge Centre Caliper
Series 536
Vernier Caliper• Caliper for measuring distance between an edge and the centre of a hole.
536-109
Metric
No. Range L mm a mm b mm c mm d mm e ø mm Mass g Price €536-109 5-300 mm 393 100 64 10 20 1 320 419.00
Specifications
Accuracy ±0,05 mmGraduation 0,05 mmDelivered In a case
204 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Swivel Vernier CaliperSpecifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Series 536
• The moving jaw can be rotated to measure sectioned shafts.• With swivelling jaw and depth bar.
536-212
Metric
No. Range Accuracy Rotation of Mass g Price €536-212 0-200 mm ±0,05 mm ±90° 190 523.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
205
ABSOLUTE Digimatic Back-Jaw Centreline Caliper
Series 573
• Specially designed to measure hole centre-to-centre or edge-to-centre distances. • Provided with jaws on the back of the slider, measurements can be read easily
from above.• Direct reading of pitch measurements is available due to the offset value setting
function.
573-116-10Centre-to-centre type
573-118-10Edge-to-centre type
Metric Centre-to-centre typeNo. Range Accuracy Mass g Price €573-116-10 10-200 mm ±0,10 mm 485 1,190.00573-117-10 10-300 mm ±0,15 mm 580 1,300.00
Metric Edge-to-centre typeNo. Range Accuracy Mass g Price €573-118-10* 10-200 mm ±0,10 mm 490 1,090.00573-119-10* 10-300 mm ±0,15 mm 585 1,200.00
573-118-10 573-116-10573-119-10 573-117-10
Functions Series 573Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETON/OFFLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mmDisplay LCD, Character Height 7 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
959143 Data-hold unit 24.0002AZD790C U-WAVE Data Cable with
data switch87.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Edge-to-center type
Centre-to-centre type
* 10 mm
206 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Point CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Pointed measuring jaws
Fine measuring jaws
Series 573
• Narrow-tip jaws fit into very small grooves and tracks, making many previously difficult outside measurements far easier to ob-tain.
573-622
573-626
Metric Pointed measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-621 0-150 mm ± 0,02 mm 163 450.00573-622 0-150 mm ± 0,02 mm 163 400.00
Metric Fine measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-625 0-150 mm ± 0,02 mm 163 500.00573-626 0-150 mm ± 0,02 mm 163 450.00
Inch/Metric Pointed measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-721 0-150 mm/0-6" ± 0.001" 163 450.00
Inch/Metric Fine measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-725* 0-150 mm/0-6" ± 0.001" 163 500.00
mm
10
0.30.3
3040
21°
Pointed measuring jawsFine measuring jaws
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
207
Vernier Point Caliper
Series 536
• Narrow-tip jaws fit into very small grooves and tracks, making many previously difficult outside measurements far easier to obtain.
536-121
Metric
No. Range Accuracy Graduation Mass g Price €536-121 0-150 mm ±0,05 mm 0,05 mm 150 175.00
mm
4021°
0.3
30
10
0.3
Specifications
Accuracy Refer to the list of specificationsDelivered In a case
208 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Blade Type CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Series 573
Absolute Digimatic Caliper• The thin blade-type jaws fit into very small grooves and make previously difficult
outside measurements far easier to obtain.• The outside measuring faces are carbide.
573-635
Metric
No. Range Accuracy Thumb roller Mass g Price €573-634* 0-150 mm ±0,02 mm 168 630.00573-635 0-150 mm ±0,02 mm 168 580.00
Inch/Metric
No. Range Accuracy Thumb roller Mass g Price €573-734 0-150 mm/0-6" ±0,02 mm/0.001" 168 630.00
mm
20
40
0.75
3.5
Specifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Series 536
Vernier Caliper• The thin blade-type jaws fit into very small grooves and make previously difficult outside meas-
urements far easier to obtain.• The outside measuring faces are carbide.
536-134
Metric
No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-134 0-150 mm ±0,05 mm 229 20 40 0.75 16 3 140 335.00536-135 0-200 mm ±0,05 mm 286 25 50 0.75 16 3 180 363.00536-136 0-300 mm ±0,08 mm 30 64 1 16 3.8 420 436.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
209
ABSOLUTE Digimatic Neck Caliper
Series 573
• Can measure wall thickness inside bores and recesses.
573-651
573-654Point jaw type
Metric
No. Range Accuracy Thumb roller Mass g Price €573-651 0-150 mm ±0,03 mm 157 560.00573-653 0-150 mm ±0,03 mm 157 510.00
Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-652 0-150 mm ±0,03 mm 157 650.00573-654 0-150 mm ±0,03 mm 157 600.00
Inch/Metric
No. Range Accuracy Thumb roller Mass g Price €573-751 0-150 mm/0-6" ±0,03 mm/0.0015" 157 560.00
Inch/Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-752* 0-150 mm/0-6" ±0,03 mm/0.0015" 157 650.00
mm
5
533.5 4028
.5
mm
33.5 40
ø2.4
10
5(e)
5
ø0.5
Point jaw type
Functions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life aprox. 15.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
210 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Vernier Neck CaliperSpecifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
Series 536
• Can measure wall thickness inside bores and recesses.
536-151
536-152Point jaw type
Metric
No. Range Accuracy Mass g Price €536-151 0-150 mm ±0,05 mm 140 327.00
Metric Point jaw typeNo. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-152 0-150 mm ±0,05 mm 229 38 5 5 16 2 140 420.00
5
355
mm
536-151
536-152Point jaw type
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
211
ABSOLUTE Digimatic Inside Caliper
Series 573
Inside groove type• Specially designed for inside measurements in hard-to-reach places.
573-647
573-646Point jaw type
Metric
No. Range Accuracy Thumb roller Mass g Price €573-645 10-160 mm ±0,05 mm 147 630.00573-647 10-160 mm ±0,05 mm 147 580.00
Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-646 20-170 mm ±0,03 mm 157 660.00573-648 20-170 mm ±0,03 mm 157 610.00
Inch/Metric
No. Range Accuracy Thumb roller Mass g Price €573-745* 10-150 mm/0.4-6" ±0,05 mm/0.002" 147 630.00
Inch/Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-746 20-150 mm/0.8-6" ±0,03 mm/0.0015" 157 660.00
mm
233
35
320
53
3.5
23.5
16
R5 R5
mm
(233)
31.5 38 40
2
(60°)
ø0.5
ø2.4
28.5
56
(16)
5 (e)
10
5
Functions Series 573Data outputORIGIN (ABS-Zero)OFFSET*Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
* 20 mm
212 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Inside Vernier CaliperSpecifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
> ø20
Series 536
• Specially designed for inside measurements in hard-to-reach places.
536-145
536-146Point jaw type
Metric Point jaw typeNo. Range Accuracy a mm b mm c mm d mm e mm f mm g mm Mass g Price €536-146 20-150 mm ±0,05 mm 229 16 38 31 5 5 2 140 385.00536-147 30-300 mm ±0,08 mm 403 20 98 89 5 10 2 370 423.00536-148 70-450 mm ±0,10 mm 610 25 145 136 10 25 5 1,250 796.00536-149 70-600 mm ±0,12 mm 750 25 145 136 10 25 5 1,430 818.00
Metric
No. Range Accuracy Mass g Price €536-145 10-150 mm ±0,05 mm 130 400.00
mm
229
35
320
53
3
16
R5 R5
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
213
Inside Vernier Caliper
Series 536
• Can measure width of grooves and lands inside bores and recesses.
536-171
536-172
Metric
No. RangeInside measuring
fromL mm a mm b mm c mm d mm e mm f mm g mm Mass g Price €
536-171 0-200 mm 10 mm 320 28 12 4 5 3.5 170 432.00536-172 0-200 mm 2 mm 320 28 28.5 20 12 4 1 3.5 200 546.00
L
d
a
fe
b
cg
R5: 536-171(1): 536-172
(1) flat touch for 536-172
Series 536
Functions 536-
172
Fine adjustment
Specifications
Accuracy ±0,03 mmGraduation 0,02 mmDelivered In a case
> ø3
0mm
> ø3
0mm
214 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Inside CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specificationsDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
mm
Section X−X’
290
8
65
0.3 3
90.5
74.5
57.570
16
X‘XSeries 573
ABSOLUTE Digimatic Caliper - Knife-edge type• Specially designed for inside measurements in hard-to-reach places.• With long narrow jaws.
573-642
Metric
No. Range Accuracy Thumb roller Mass g Price €573-642 10-200 mm ±0,05 mm 227 710.00573-643 10-200 mm ±0,05 mm 227 660.00
Inch/Metric
No. Range Accuracy Thumb roller Mass g Price €573-742* 10-200 mm/0.4-8" ±0,05 mm/0.002" 227 710.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
215
Inside Caliper
Series 536
Vernier Caliper - Knife-edge type• Specially designed for inside measurements in hard-to-reach places.• With long narrow jaws.
536-142
Metric
No. Range Accuracy Mass g Price €536-142 10-200 mm ±0,12 mm 210 535.00
Specifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
288
8
700.
3 3
16
X‘X
Section X−X’
mm
216 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Tube Thickness CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case, including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Series 573
ABSOLUTE Digimatic Caliper• The beam-mounted jaw is a round bar that facilitates measurements of tube wall
thickness.
573-661
Metric
No. Range Accuracy Thumb roller Mass g Price €573-661 0-150 mm ±0,05 mm 167 560.00573-662 0-150 mm ±0,05 mm 167 510.00
Metric/Inch
No. Range Accuracy Thumb roller Mass g Price €573-761 0-150 mm/0-6" ±0,05 mm/0.002" 167 560.00
mm
32
56
235
40
ø3
16
Specifications
Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case
229
32
56
40
ø3
16
mm
Series 536
Vernier Caliper • The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.
536-161
Metric
No. Range Accuracy Mass g Price €536-161 0-150 mm ±0,05 mm 150 295.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
217
Plastic Caliper
Series 700
• Ideal for use in laboratory, wood-shop, office, etc. • Choice of standard and deep throat type models.
700-127 / 700-126
700-128
Metric
No. Range Accuracy Mass g Price €700-127 0-150 mm ±0,2 mm 45 47.00700-128 0-150 mm ±0,5 mm 55 69.00
Inch/Metric
No. Range Accuracy Mass g Price €700-126* 0-150 mm/0-6" ±0,2 mm/0.008" 45 47.00
235
(60)
(34)40
164(1
4.2)
1
15
1519
mm
700-127 / 700-126mm
65
8
(14.
2)
416
(34)
(60)235
80
700-128
Functions Series 700ZEROON/OFFLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,1 mm or 0,1 mm/0.001"Max. slider speed 1800 mm/s
Consumable spares
No. Description Price €938882 Battery SR44 5.00
218 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Optional Accessory for CalipersDepth base attachment
• For vernier and dial calipers which have a depth measuring bar.• Finely ground base surface and secure locking clamp.
050084-10 050083-10
No. Size Applicable measuring range of caliper a mm b mm c mm d mm e mm Mass g Price €050083-10 75 mm 100, 150 and 200 mm/4, 6 and 8" 25 75 24.5 9 16 130 43.00050084-10 100 mm 100, 150 and 200 mm/4, 6 and 8" 25 100 24.5 9 16 160 48.50050085-10 125 mm 300 mm/12" 30 125 28.5 11.5 20 270 55.00
Sample application
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
219
Digimatic Depth Micrometer
Series 329
Interchangeable Rod Type• ø 4 mm interchangeable rods, with lapped measuring surfaces• Ratchet stop provides constant measuring force.• Measuring rod lock.• SPC data output.
329-250-10
Metric
No. Range Base (W x T) Number of rods Mass g Price €329-250-10 0-150 mm 101,6 x 16 mm 6 540 700.00329-251-10 0-300 mm 101,6 x 16 mm 12 790 910.00
Inch/Metric
No. Range Base (W x T) Number of rods Mass g Price €329-350-10 0-150 mm/0-6" 101,6 x 16 mm/4 x 0.63" 6 540 700.00329-351-10 0-300 mm/0-12" 101,6 x 16 mm/4 x 0.63" 12 790 910.00
ø18.
3
ø4
101.
6
18 3.5 47.2 2.3 3 60.9 17A
mm
A = Range
Functions Series 329Data outputZERO/ABS2 x PRESETAuto power off after 20 min. in non useDATA/HOLDLock functionLow voltage alarm
Specifications
Digital step 0,001 mm or 0,001 mm/0.00005"
Micrometer Head Feed (0-25 mm) (excluding quantizing error)
±3 μm
Zero point errors of rods ±4 μm (0-150 mm)±6 μm (0-300 mm)
Flatness of reference surface (base)
2 μm
Flatness of measuring face (rod)
0,3 μm
Parallelism between measuring face (rod) and reference surface (base)
(4+L/50) μmL = max. measuring length (mm)
Measuring span 25 mmRod ø4 mmScales Thimble and sleeve satin
chrome finish, ø18 mmSpindle pitch 0,5 mm with spindle lockMeasuring surfaces Hardened precision ground,
micro-lap finishBase Hardened tool steelMeasuring force 5-10 NBattery life approx. 1.2 yearsDelivered Including box, key and 1
battery
Optional accessories
No. Description Price €05CZA662 Digimatic cable with data
switch (1 m)71.00
05CZA663 Digimatic cable with data switch (2 m)
80.00
02AZD790B Connecting cable U-Wave with data switch
92.00
06ADV380B USB Input Tool Direct cable with data switch (2 m)
110.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
220 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Depth MicrometerSpecifications
Graduation 0,01 mm or 0.001"Zero point error of rods ±4 μm (0-150 mm)
±6 μm (0-300 mm)Micrometer Head Feed (0-25 mm)
±3 μm
Flatness of reference surface (base)
1,3 μm for 63,5 mm2 μm for 101,6 mm
Flatness of measuring face (rod)
0,3 μm
Parallelism between measuring face (rod) and reference surface (base)
(4+ L/50) μm L=max. measuring length (mm)
Scales Thimble and sleeve satin chrome finish ø18 mm
Measuring span 25 mmSpindle pitch 0,5 mm, with spindle lockMeasuring surfaces Hardened, precision ground,
micro-lap finishBase Hardened tool steelMeasuring force 5-10 NDelivered Including box and key
Series 129
Interchangeable Rod Type• ø 4 mm interchangeable rods, with lapped measuring surfaces• Ratchet stop provides constant measuring force. • Measuring rod lock.
129-112
Metric Base 63,5 x 16 mmNo. Range Number of rods Mass g Price €129-154* 0-25 mm 240 147.00129-109 0-50 mm 2 260 151.00129-110 0-75 mm 3 280 153.00129-111 0-100 mm 4 310 201.00129-112 0-150 mm 6 370 278.00129-152 0-300 mm 12 600 421.00
Metric Base 101,6 x 16 mmNo. Range Number of rods Mass g Price €129-155* 0-25 mm 290 174.00129-113 0-50 mm 2 310 178.00129-114 0-75 mm 3 330 189.00129-115 0-100 mm 4 355 220.00129-116 0-150 mm 6 410 289.00129-153 0-300 mm 12 640 443.00
Inch Base 4 x 0.63"No. Range Number of rods Mass g Price €129-129* 0-2" 2 310 178.00129-130* 0-3" 3 330 189.00129-131* 0-4" 4 355 220.00129-132 0-6" 6 410 289.00129-150 0-12" 12 640 443.00
Inch Base 2.5 x 0.63"No. Range Number of rods Mass g Price €129-126 0-3" 3 280 153.00129-127* 0-4" 4 310 201.00129-128 0-6" 6 370 278.00129-149* 0-12" 12 600 421.00
mm
A
ø18.
3
65.4 17318
ø4
101.
6
A = Range
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
221
Depth Micrometer
Series 128
• ø4 mm measuring rod.• Ratchet stop provides constant measuring force.• Measuring rod lock.• Carbide-tipped measuring rod model is available.
128-101
Metric
No. Range Base (W x T) Mass g Price €128-101 0-25 mm 63,5 x 16 mm 200 129.00128-102 0-25 mm 101,6 x 16 mm 250 162.00
Metric Carbide-tipped measuring rodNo. Range Base (W x T) Mass g Price €128-103* 0-25 mm 63,5 x 16 mm 200 154.50128-104* 0-25 mm 101,6 x 16 mm 250 194.50
Inch
No. Range Base (W x T) Mass g Price €128-105 0-1" 2.5 x 0.63" 200 129.00128-106 0-1" 4 x 0.63" 250 162.00
Specifications
Graduation 0,01 mm or 0.001"Micrometer Head Feed (0-25 mm)
±3 μm
Flatness of reference surface (base)
1,3 μm (for 63,5 mm)2 μm (for 101,6 mm)
Flatness of measuring face (rod)
0,3 μm
Parallelism between measuring face (rod) and reference surface (base)
(4+L/50) μm L=max. measuring length (mm)
Scales Thimble and sleeve satin chrome finish ø18 mm
Measuring span 25 mmSpindle pitch 0,5 mm with spindle lockMeasuring surfaces Hardened precision ground,
micro-lap finishBase Hardened tool steelMeasuring force 5-10 NDelivered Including box and key
222 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Depth GaugeFunctions Series 571Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Repeatability 0.01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Heighr 9 mm 150,
200 300 mm 10 mm (>300 mm)Max. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case (450/1000 mm)
Including 1 battery
Optional accessories
No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
02AZD790C U-WAVE Data Cable with data switch
87.00
900370 Base length 180 mmfor range up to 300 mmThickness 8 mm
50.00
900371 Base length 260 mmfor range up to 300 mmThickness 8 mm
70.00
900372 Base length 320 mmfor range up to 300 mmThickness 8 mm
78.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Optional accessories for Inch
No. Description Price €900367 Base length 7"
for range up to 12"50.00
900368 Base length 10"for range up to 12"
70.00
900369 Base length 12"for range up to 12"
78.00
Up to 300 mm range models
Series 571
• The ABSOLUTE feature of this gauge keeps track of the origin point (once set) for the entire life of the battery.
• Base and measuring faces are hardened and micro-lapped.• SPC data output.
571-201-20
Metric
No. Range Accuracy Base (W x T) L mm Mass g Price €571-201-20 0-150 mm ±0,02 mm 100 x 6 mm 237 207 305.00571-202-20 0-200 mm ±0,02 mm 100 x 6 mm 287 227 360.00571-203-20 0-300 mm ±0,03 mm 100 x 6 mm 403 257 405.00571-204-10 0-450 mm ±0,05 mm 250 x 10 mm 635 1,270 700.00571-205-10 0-600 mm ±0,05 mm 250 x 10 mm 785 1,400 810.00571-206-10 0-750 mm ±0,06 mm 250 x 10 mm 935 1,530 880.00571-207-10 0-1000 mm ±0,07 mm 250 x 10 mm 1,200 1,760 970.00
Inch/Metric
No. Range Accuracy Base (W x T) L mm Mass g Price €571-211-20 0-150 mm/0-6" ±0,02 mm/0.001" 3.93 x 0.23" 237 207 305.00571-212-20 0-200 mm/0-8" ±0,02 mm/0.001" 3.93 x 0.23" 287 227 360.00571-213-10 0-300 mm/0-12" ±0,03 mm/0.0015" 3.93 x 0.23" 403 257 405.00571-214-10 0-450 mm/0-18" ±0,05 mm/0.002" 9.8 x 0.39" 635 1,270 700.00571-215-10 0-600 mm/0-24" ±0,05 mm/0.002" 9.8 x 0.39" 785 1,400 810.00571-216-10 0-750 mm/0-30" ±0,06 mm/0.0025" 9.8 x 0.39" 935 1,530 880.00571-217-10* 0-1000 mm/0-40" ±0,07 mm/0.003" 9.8 x 0.39" 1,200 1,760 970.00
Over 300 mm range models
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
223
ABSOLUTE Digimatic Depth Gauge
Series 571
IP67 Coolant Proof model• Designed for use in challenging work environments.• Extremely resistant to coolants and lubricants.• The ABSOLUTE feature of this gauge keeps track of the origin point (once set)
for the entire life of the battery. • Base and measuring faces are hardened and micro-lapped.• SPC data output.
571-251-10
Metric
No. Range Accuracy Base (W x T) L mm Mass g Price €571-251-10 0-150 mm ±0,02 mm 100 x 6 mm 237 199 359.00571-252-10 0-200 mm ±0,02 mm 100 x 6 mm 287 219 409.00571-253-10 0-300 mm ±0,03 mm 100 x 6,3 mm 404 357 455.00
Inch/Metric
No. Range Accuracy Base (W x T) L mm Mass g Price €571-261-10* 0-150 mm/0-6" ±0,02 mm/0.001" 3.93 x 0.23" 237 199 359.00571-262-10* 0-200 mm/0-8" ±0,02 mm/0.001" 3.93 x 0.23" 287 219 409.00571-263-10* 0-300 mm/0-12" ±0,03 mm/0.0015" 3.93 x 0.23" 403 404 455.00
Range : 0-150 mm, 0-200 mm
Range : 0-300 mm
Functions Series 571Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Repeatability 0,01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7.5 mm (150,
200 mm) 10,2 mm (300 mm)Max. slider speed UnlimitedBattery life approx. 15.000 hours (150, 200 mm)
5.000 hours (300 mm)Delivered In a case including 1 battery
Optional accessories
No. Description Price €02AZD790A Connecting cable U-Wave
with data switch92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
05CZA624 Digimatic cable with data switch (1 m)
68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
900370 Base length 180 mmfor range up to 300 mmThickness 8 mm
50.00
900371 Base length 260 mmfor range up to 300 mmThickness 8 mm
70.00
900372 Base length 320 mmfor range up to 300 mmThickness 8 mm
78.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Optional accessories for Inch
No. Description Price €900367 Base length 7"
for range up to 12"50.00
900368 Base length 10"for range up to 12"
70.00
900369 Base length 12"for range up to 12"
78.00
Mounting the interchangeable base
224 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
ABSOLUTE Digimatic Depth Gauge Hook Type/Pin Type
Series 571
Functions 571-
254-
10up
to57
1-26
5-10
571-
301-
1057
1-30
2-10
Data outputORIGIN (ABS-Zero)OFFSETAuto power off after 20 min. in non useLow voltage alarm
Specifications
Accuracy ±0,03 mm(excluding quantizing error)
Repeatability 0,01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7.5 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case including 1 battery
Optional accessories
No. Description Price €05CZA624 Digimatic cable with data
switch (1 m)68.00
05CZA625 Digimatic cable with data switch (2 m)
77.00
02AZD790A Connecting cable U-Wave with data switch
92.00
06ADV380A USB Input Tool Direct cable (2 m)
110.00
900370 Base length 180 mmfor range up to 300 mmThickness 8 mm
50.00
900371 Base length 260 mmfor range up to 300 mmThickness 8 mm
70.00
900372 Base length 320 mmfor range up to 300 mmThickness 8 mm
78.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Optional accessories for Inch
No. Description Price €900367 Base length 7"
for range up to 12"50.00
900368 Base length 10"for range up to 12"
70.00
900369 Base length 12"for range up to 12"
78.00
Mounting the interchangeable base
Series 571
• Direct reading for either measuring surface is obtained by pressing the OFFSET function, which compensates for the 10 mm (or 0.4") width of the hook.
• The ABSOLUTE feature of this gauge keeps track of the origin point (once set) for the entire life of the battery.
571-255-10
571-301-10
Metric Pin TypeNo. Range L mm Mass g Price €571-301-10 0-150 mm 237 207 390.00571-302-10 0-200 mm 287 227 445.00
Metric Hook Type
No.Depthrange
Hookrange
L mm Mass g Price €
571-254-10 10-160 mm 0-150 mm 247 216 390.00571-255-10 10-210 mm 0-200 mm 297 236 445.00
Inch/Metric Hook Type
No.Depthrange
Hookrange
L mm Mass g Price €
571-264-10* 10-160 mm/0.4-6.4" 0-150 mm/0-6" 247 216 390.00571-265-10* 10-210 mm/0.4-8.4" 0-200 mm/0-8" 297 236 445.00
10
7
26100
10
70
16
2-ø5 L
(57.5)
(41.
3)
mm
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
225
Vernier Depth Gauge
Series 527
• Base and measuring faces are hardened and micro-lapped. • Fine adjustment models are available.
527-101
Metric
No. Range Accuracy Graduation Base (W x T) L mm Mass g Price €527-201 0-150 mm ±0,05 mm 0,05 mm 100 x 6,5 mm 260 240 105.00527-121* 0-150 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 260 215 110.00527-202 0-200 mm ±0,05 mm 0,05 mm 100 x 6,5 mm 310 260 115.00527-122 0-200 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 310 230 120.00527-203 0-300 mm ±0,08 mm 0,05 mm 100 x 6,5 mm 410 300 150.00527-123 0-300 mm ±0,04 mm 0,02 mm 100 x 6,5 mm 410 265 155.00527-204 0-600 mm ±0,10 mm 0,05 mm 250 x 10 mm 800 1,510 630.00527-205 0-1000 mm ±0,15 mm 0,05 mm 250 x 10 mm 1,200 1,880 680.00
Metric With fine adjustmentNo. Range Accuracy Graduation Base (W x T) L mm Mass g Price €527-101 0-150 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 260 280 120.00527-102 0-200 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 310 300 125.00527-103 0-300 mm ±0,04 mm 0,02 mm 100 x 6,5 mm 410 350 160.00527-104 0-600 mm ±0,05 mm 0,02 mm 250 x 10 mm 800 1,510 680.00527-105 0-1000 mm ±0,07 mm 0,02 mm 250 x 10 mm 1,200 1,880 720.00
Inch With fine adjustmentNo. Range Accuracy Graduation Base (W x T) L mm Mass g Price €527-111 0-6" ±0.001" 0.001" 3.93 x 0.25" 260 280 120.00527-112* 0-8" ±0.001" 0.001" 3.93 x 0.25" 310 300 125.00527-113 0-12" ±0.0015" 0.001" 9.8 x 0.39" 410 350 160.00527-114* 0-24" ±0.002" 0.001" 9.8 x 0.39" 800 1,510 680.00527-115* 0-40" ±0.003" 0.001" 9.8 x 0.39" 1,200 1,880 720.00
Over 300 mm range models
Specifications
Accuracy Refer to the list of specifications
Optional accessories
No. Description Price €900370 Base length 180 mm
for range up to 300 mmThickness 8 mm
50.00
900371 Base length 260 mmfor range up to 300 mmThickness 8 mm
70.00
900372 Base length 320 mmfor range up to 300 mmThickness 8 mm
78.00
Optional accessories for Inch
No. Description Price €900367 Base length 7"
for range up to 12"50.00
900368 Base length 10"for range up to 12"
70.00
900369 Base length 12"for range up to 12"
78.00
Up to 300 mm range models
Mounting the interchangeable base
226 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Vernier Depth Gauge Hook TypeSpecifications
Accuracy Refer to the list of specifications
Optional accessories
No. Description Price €900370 Base length 180 mm
for range up to 300 mmThickness 8 mm
50.00
900371 Base length 260 mmfor range up to 300 mmThickness 8 mm
70.00
900372 Base length 320 mmfor range up to 300 mmThickness 8 mm
78.00
06ABZ297 Plastic soft case for150/200 mm depth gauge
25.00
06ADS452 Plastic soft case for300 mm depth gauge
27.00
Mounting the interchangeable base
Series 527
• The end of the beam is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement.
• Fine adjustment models are available.
527-401
Metric
No.Depthrange
Hookrange
Accuracy Graduation L mm Mass g Price €
527-401 10-150 mm 0-150 mm ±0,05 mm 0,05 mm 260 240 140.00527-402 10-200 mm 0-200 mm ±0,05 mm 0,05 mm 310 240 150.00527-403 10-300 mm 0-300 mm ±0,08 mm 0,05 mm 410 270 190.00
Metric With fine adjustment
No.Depthrange
Hookrange
Accuracy Graduation L mm Mass g Price €
527-411 10-150 mm 0-150 mm ±0,03 mm 0,02 mm 260 280 170.00527-412 10-200 mm 0-200 mm ±0,03 mm 0,02 mm 310 300 190.00527-413 10-300 mm 0-300 mm ±0,04 mm 0,02 mm 410 350 220.00
L1 = depth-vernier reading / L2 = hook-vernier reading / L3 = (depth-vernier reading) - (hook-vernier reading)
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
227
Dial Depth Gauge
Series 527
• Easy-to-read dial. • Base and measuring faces are hardened and micro-lapped.• With fine adjustment.
527-301-50
Metric
No. Range Accuracy L mm Mass g Price €527-301-50 0-150 mm ±0,05 mm 260 280 193.00527-302-50 0-200 mm ±0,05 mm 310 300 210.00527-303-50 0-300 mm ±0,08 mm 410 340 235.00
Inch
No. Range Accuracy L mm Mass g Price €527-311-50* 0-6" ±0.001" 260 280 193.00527-312-50* 0-8" ±0.001" 310 300 210.00527-313-50* 0-12" ±0.0015" 410 340 235.00
Specifications
Accuracy Refer to the list of specificationsGraduation 0,05 mm or 0.001"Base size 100 x 6,5 mm (W x T)
Optional accessories
No. Description Price €900370 Base length 180 mm
for range up to 300 mmThickness 8 mm
50.00
900371 Base length 260 mmfor range up to 300 mmThickness 8 mm
70.00
900372 Base length 320 mmfor range up to 300 mmThickness 8 mm
78.00
Optional accessories for Inch
No. Description Price €900367 Base length 7"
for range up to 12"50.00
900368 Base length 10"for range up to 12"
70.00
900369 Base length 12"for range up to 12"
78.00
Mounting the interchangeable base
228 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Tyre Tread Depth GaugeFunctions Series 571Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Repeatability 0,01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character height 7,5 mmRepeatability 0,01 mmMax. slider speed unlimitedBattery life approx. 20.000 hoursDelivered Including 1 battery
Optional accessories
No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data
switch (1 m)36.50
959150 Digimatic cable with data switch (2 m)
42.00
02AZD790C U-WAVE Data Cable with data switch
87.00
06ADV380C USB Input tool Direct cable with data switch (2 m)
97.00
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Series 571
• Specially designed to measure tyre tread depth.• The ABSOLUTE feature of this gauge keeps track of the origin point (once set) for
the entire life of the battery.• SPC data output.
571-100MOT-10
87.2
(60) 16
(3.5
)
ø30.8
ø3
mm
Metric
No. Range Accuracy Mass g Price €571-100MOT-10 0-25 mm ±0,02 mm 160 198.00
Inch/Metric
No. Range Accuracy Mass g Price €571-200MOT-10 0-25 mm/0-1" ±0,02 mm/0.0005" 160 198.00
Functions Series 700ZEROON/OFFLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,1 mm or 0,1 mm/0.001"Delivered Including 1 battery
Consumable spares
No. Description Price €938882 Battery SR44 5.00
Series 700
• Specially designed to measure tyre tread depth.• Plastic construction for lightweight use.
700-104
mm
2960
11383
164
4.3
ø1.5
ø3
13
25
10
Metric
No. Range Accuracy Mass g Price €700-104 0-25 mm ±0,2 mm 50 51.00
Inch/Metric
No. Range Accuracy Mass g Price €700-105* 0-25 mm/0-1" ±0,2 mm/0.008" 50 51.00
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
229
Optional Accessories for Depth Gages
Extension bases
• Extension bases are suitable for fitting to depth gauge models up to 0-300 mm (0-12") range. They cannot be attached to 0-600 mm, 0-1000 mm, 0-24" or 0-40" range models.
900372
Metric
No. Size La
mmb
mmNumber of holes Mass g Price €
900370 180 mm 70 mm 55 mm 2 200 50.00900371 260 mm 35 mm 60 mm 5 270 70.00900372 320 mm 70 mm 55 mm 4 345 78.00
Inch
No. Size La
mmb
mmNumber of holes Mass g Price €
900367* 7" 2.76" 2.17" 2 190 50.00900368 10" 1.38" 2.36" 5 280 70.00900369 12" 2.76" 2.17" 4 350 78.00 Attaching the extension base
230 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.
Recommended