View
6
Download
0
Category
Preview:
Citation preview
ROTATINGEQUIPMENTAlpha Group Co.,Ltd.
PUMP &
www.alphagroup.co.th
SPP PUMPS UKFire Water PumpPackage Sets
SPP PUMPS UKEnd Suction PumpKPD
SPP PUMPS UKSplit Case PumpLLC
SPP PUMPS UKMultistage PumpCF
SALMSON FranceEnd Suction PumpNOS
SALMSON FranceHydrominiINVERTER
SALMSON FranceMultistage PumpMULTi-H
SALMSON FranceMultistage PumpMULTi-V
SALMSON FranceHydrominiMULTi-V
WILO GermanyMultistage PumpMHI
WILO GermanyMultistage PumpMVI
WILO GermanyEnd Suction PumpSCP
WILO GermanyWastewater EquipmentFA
WILO GermanyHVAC PumpStar-RS
KIRLOSKAR IndiaMultistage PumpRKB
KIRLOSKAR IndiaSplit Casing PumpUP
KIRLOSKAR IndiaSplit Casing PumpSCT
KIRLOSKAR IndiaEnd Suction PumpDB
KIRLOSKAR IndiaVertical Turbine PumpSCT
NEW PRODUCTRANGE EUROPEAN
ORIGIN
High PressurePlunger PumpREMOTO Float Switch
ACCESSORIES
Mechanical Seal
ACCESSORIES
Spare part
TECHNO ChinaSS Close Coupled Pump
TECHNO ChinaMagnetic DrivePump
TECHNO ChinaSelf-Priming Sewage Pump (Medium-Duty)
TECHNO ChinaHeavy Duty Self- Priming Sewage Pump
TECHNO ChinaStainless Steel End-Suction Pump
INVENT GermanyDiffuser
INVENT GermanyHyper Classic Mixer
INVENT GermanyHigh Speed Turbo Blower
GRUPPO ATURIA ItalyNA/PISOTK
GRUPPO ATURIA ItalyMagnetic Drive PumpNMD
GRUPPO ATURIA ItalyMagnetic Drive PumpPCM
FOURGROUP ItalyElectronic ControlDELTA 2
FOURGROUP ItalyElectronic ControlQS2EP
BOOSTER SET
BOOSTER SET ALTi-v
AQUASYSTEM ItalyPressure TankVAO
AQUASYSTEM ItalyPressure TankVBV
Control Panels 18FOURGROUP
Mixing and Aeration SystemAeration DiffuserHigh Speed Turbo Blower
19INVENT
Diaphragm Pressure Vessel 17AQUASYSTEM
Float Switch 17REMOTO
End Suction PumpMultistage Pump
SPP PUMPS 01INSTREAM / KPD / GKCF
02
03
Split Case PumpFire Water Pump
LLCPACKAGE SETS
Air Operated Double Diaphragm PumpVertical Multistage Inline Pump
Multistage PumpSplit Case Pump
KIRLOSKAR 04RKBSCT
2-Pole/4-Pole, Direct Coupled TypeVertical Multistage Centrifugal PumpCentrifugal Blower
TERAL 05SJ, SJ4ASVMCMF, CLF, VFZ
Multistage Pump ECONOMY MHI / MULTIVERT MVI / HELIX VWILO 06Propeller PumpSubmersible Mixer and Flow GeneratorRecirculation Pump
07
Medium and Large Sewage PumpSplit Case PumpContractor Drainage Pump
08FASCPKS
KPR
RZPTR , TRE
Small Booster SetProcess Water PumpLarge Booster Set
09SALMSON
Multistage PumpMultistage PumpSelf-Priming Pump
Drainage PumpSmall Sewage PumpOther Product
10
11SUBSONMini-SVO, SVO, SCA
MULTi-HsMULTi-VsJETSON
Multistage PumpTurbine PumpSingle Stage Pump
12GRUPPOATURIA
Single Stage PumpSplit Case PumpFire Fighting Set
13
TK, TKR, VTKVAB, VABX, TKV, PAGNA
NDPD
Heavy Duty Self- Priming Sewage PumpSelf-Priming Sewage Pump (Medium-Duty)Close-Coupled Self-Priming Sewage Pump
14
Process Water PumpProcess Pump Open/Semi-Open Imp.Stainless Steel End-Suction Pump
15
Mechanical Seal / Spare Part
16Booster Set
17
TECHNO SPTJTJZ
EA: End-SuctionIH: End-SuctionDZ, DZA
HCM / HCMAiDisciTURBO®
Contents
www.alphagroup.co.th 01Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
END SUCTION PUMPSPP PUMPS
INSTREAMFeatures• Close coupled in-line design• Simple installation and easy service back pull-out design• Cost-effective solution• TEFC IE2 motors fitted as standard• High interchangeability – rotating element will interchange with Eurostream• Mechanical seal as standard• Impellers cut to duty
Configuration Vertical close coupled electric motor driven
• 40 mm to 100 mm• Outputs up to 216 m3/h• Heads up to 65 m
Discharge & Performance
END SUCTION PUMPSPP PUMPS
KPDFeatures• Back pull-out arrangement• Bearing oil cooling arrangement• Steam jacket arrangement• Centre line mounting• Mechanical seal or gland packed• Temperatures range -50 to 350 °C
Configuration Horizontal or vertical electric or engine driven process pump
• Delivery size up to 200 mm• Outputs up to 900 m3/h• Heads up to 225 m
Discharge & Performance
END SUCTION PUMPSPP PUMPS
GKFeatures• Back pull-out• ISO 5199 / 2858 / EN:22858• Enclosed impeller only• Gland packed• Balanced impeller• Top centre line discharge• No venting required
Configuration Horizontal, electric motor
• Delivery size up to 100 mm• Outputs up to 800 m3/h• Heads up to 140 m
Discharge & Performance
MULTISTAGE PUMPSPP PUMPS
CFFeatures• Channel Multistage, Modular Construction• Gland Packed / Mechanical Seal• Electrical Drive / Engine Drive• Self priming• Conforming to DIN 24254
Configuration Multistage Pump with modular construction
• Delivery size up to 50 mm• Outputs up to 20 m3/h• Head up to 315 m• Temp up to 120 °C
Discharge & Performance
www.alphagroup.co.th02 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
FIRE WATER PUMP SPP PUMPS
PACKAGE SETS
Features• Meeting the requirements of worldwide insurance and approvals bodies• End Suction – Centre line discharge back pull-out rotating element can be removed without disturbing pipe work• End Suction – Close coupled, space and cost saving solution• Axially split case rotating element can be removed without disturbing pipework• Rigid, box-section baseplates for end suction and split case long coupled packages• Stainless steel shaft with tight tolerances designed to transmit the maximum load across full pump curve• Bearing arrangements of ample proportion• IE2 motors fitted as standard• Impellers machined and hand finished to meet customer duty
ConfigurationSingle or multiple pump package sets, horizontal end suction close and long coupled, split case long coupled, multi-stage multi-outlet and vertical turbine all electric motor or engine driven
• End Suction (Single Stage) – 32 mm to 150 mm. Outputs up to 500 m3/h Heads up to 15.2 bar• Split Case – 80 mm to 300 mm. Heads up to 44.5 bar (Approved fire set)• Multi-stage multi-outlet – 100 mm to 125 mm. Outputs up to 315 l/s. Heads up to 60 bar• Vertical Turbine – 200 mm to 508 mm. Outputs up to 9000 m3/h• Multi-stage / multi-outlet – 50 mm to 250 mm. Outputs up to 850 m3/h. Heads up to 850 m. Up to 140 oC
Discharge & Performance
SPLIT CASE PUMP SPP PUMPS
LLC
Features• Axially split casing – rotating element can be removed without disturbing pipework• Exceptional hydraulic efficiencies• Double and single entry back to back impellers reduce end thrust, increase efficiency and bearing life• Modular design for maximum interchangeability. Multiple impeller selections• Stainless steel impellers and shaft as standard• Internal high efficiency coating as standard• Cartridge mechanical seals as standard• Double row thrust bearing• Wide operating range and extended bearing life• Approved to FM and/or UL standards• In compliance with NFPA 20• Used in pump as turbine applications
ConfigurationHorizontal, vertical open shaft, vertical direct mounted electric motor or horizontal engine driven
• 125 mm to 600 mm• Outputs to 9000 m3/h• Heads up to 300 m
Discharge & Performance
www.alphagroup.co.th 03Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
VERTICAL MULTISTAGE INLINE PUMPSPP PUMPS
• Rated flow: 1, 2, 3, 4, 5, 10, 15, 20, 32, 45, 64, 90 m3/h• Power range: 0.37 - 45 kW• Voltage range : 380 - 415V• Flow range: 0.7 - 120 m3/h• Head range: 0 - 249 m• Liquid temperature: -20 °C ~ +120 °C• Max. operating pressure: 33bar• Liquid requirements: Low viscosity, non-inflammable and non-explosive liquids, not containing solid particles or fibers. The liquids must not chemically attack the pump materials.
Technical DataApplication• Fire Fighting System• Boiler Feed System• Waterworks• Water Treatment - RO System• RO System - Pure Water Preparation• RO system - Hospital• Microfiltration• Water-saving Irrigation
Scope of Performance - SMVR, SMVS
SMVR
AIR OPERATED DOUBLE DIAPHRAGM PUMPSPP PUMPS
• 2 Plastic material options. - Polypropylene - Kynar• Pump Range 1/4” to 2” - Flow rate up to 650 L/Min - Thick wall mouldings-handling pressures up to 8 Bar• Flanged inlet/outlet connections that can be tapped BSP or NPT• Wide variety of applications for various markets including the Chemical, Process and Food&Beverage industries
Plastic Product RangeMetallic Product Range• 2 different metallic options - Aluminium - Stainless Steel• Pump Range 1/2” to 3” - Flow rate up to 950 L/Min• Wide variety of industrial applications including Ceramic Slip and Glaze, Inks, Paints & Coatings, Water, Oil, Adhesives and many more.
• No mechanical seals• Compact size self-priming air operated• Can run at a wide variety of flows• Pressure can be adjusted infinitely can run dry without damage• Low product degradation and agitation can handle some solid content• Can operate submerged does not generate heat simple in operation• Easily maintained with no special tools or skills required• Wide variety of construction and elastomer options available
Technical Data
ApplicationDiaphragm Pump application usually able to find from Industries such as Paint & Coating, Ceramic,Chemical, Coatings, Construction, Food processing, Marine, Mining, Oil&Gas, Rubber, Wastewaterand etc.
SPP DDP
www.alphagroup.co.th04 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
MULTISTAGE PUMP KIRLOSKAR
RKB
Casing : Latest casing techniques ensure smoothness of hydralic passages resulting in high efficiency and reliability under hazardous conditions. The delivery flange is vertical. The suction flange can be oriented left or right viewed from driving end.Impeller : The enclosed impellers of the radial flow type are provided with balancing holes to balance the hydraulic axial thrust. The rotating elements are statically and dynamically balanced.Shaft : The high tensile steel shaft accurately machined and ground is supported by antifriction bearings that take the residual axial thrust and prevent axial float or radial run out. The shaft is protected by shaft sleeve from wear in stuffing box area.Stuffing Box :The stuffing box can be sealed by gland packing or by mechanical seal with minor modification. While pumping high temperature liquids from 90ºC to 140ºC, cooling jacket is provided for the stuffing box.
ApplicationSprinkler Irrigation, Fire Fighting, Water Supply to high rise buildings, Descaling, Mine Dewatering and Boiler Feed
Delivery size : up to 250 mmCapacity : up to 850 m3/hrHead : up to 850 metres
Range
Pump at 2900 rpm-50Hz
6 8 10 20 30 40 60 80 100 2004 200
20
30
40
50
60
70 80 90
100
15
Capacity in m3/hr
Tota
l hea
d in
met
ers
200
300
400
500
600
RKB 32-14H2 TO
14 STG.
RKB 40-14H2 TO 13 STG.
RKB 50-15E2 TO 11 STG.
RKB 50-15L2 TO
11 STG.
RKB 65-242 TO 9 STG.
RKB 65-19E2 TO
12 STG.
RKB 65-19L2TO
12 STG RKB 100-23E2 TO 9 STG.
RKB 40-12L2 TO
11 STG.
- 2 TO 13 STG
.RKB 32-9E
RKB 50-16H2 TO 11 STG.
SPLIT CASE PUMP KIRLOSKAR
SCT
Pump Casing : Horizontal axially split volute type, suction and discharge nozzles and supporting feet are castintergral with lower half casing.Impeller : Double or single suction type accurately balanced. In the case of double suction impellers, the hydraulic thrust is balanced automatically because of pressure equalization on both sides of the impeller.Shaft : The high tensile steel shaft accurately machined and ground is supported by antifriction bearings. The shaft is protected by shaft sleeves from wear in stuffing box area.Stuffing Box : Can be sealed by gland packing or by mechanical seal and is suitable for liquids having temperature from (-) 80°C to 900°C. In special cases packing or mechnical seal can be offered up to 1200°C.
ApplicationSuitable for handling water with slight impurities in Industries, Water Works, Irrigation, SprinklerIrrigation, Fire-fighting, Air Conditioning Plants,Water Circulation, Processing Plants.
Delivery size up to 250 mmCapacity up to 1100 m3/hrHead up to 115 metres.
Range
www.alphagroup.co.th 05Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
2-POLE/4-POLE, DIRECT COUPLED TYPETERAL
SJ, SJ4Application● General water supply in buildings and apartments, etc.● Conveyance and distribution of tap water● Water sprinkling and irrigation of paddies and fields
● Hot and cold water circulation● Supply of industrial water
*1 The material differs according to the type.
Top Runner efficiency (equivalent to IE3)Direct-on-Line start : 7.5kW or less
Star-delta start : 11kW or moreTotally enclosed fan-cooled outdoor type : 0.75kWTotally enclosed fan-cooled indoor type : 1.5kW or more
3-phase, 200V2-Pole/3000min-1 4-Pole/1500min-1
JIS 10K standard type7.5BG5/1.5
EfficiencyStartingmethod
Type
Power sourceSynchronous rotation speed
Mot
or
Flange specPaint color
Standard specificationsFresh water
0 - 80°C
-6m; -5m for 100×80
See the Specification table.Closed
Mechanical seal (SiC vs Carbon)Sealed ball bearing
CAC406 (65×50M, 80×65M…FC200)SUS403
FC200 or FCD450*1
Liquid qualityLiquid temperature
ImpellerShaft sealBearingImpellerShaftCasing
Pumpingliquid
Structure
Material
Total suction head(In case of 20°C)
Allowable boost pressure
CENTRIFUGAL BLOWERTERAL
CMF, CLF, VFZApplication● For ventilation such as heated air drying furnaces, dust collectors and sorting machines● Equipment cooling● Air supply and exhaust in factories, etc.
Features● Lightweight and Compact● Reduced Inertia Mass Up to 30% reduction● Low Vibration Thoroughly eliminating causes not due to impeller unbalance
● High Efficiency and Low Noise● Limit Load Fan Properties● Additional Safety Considerations We have introduced quality control based on Section IX of the ASME international standard
● Air conditioning for medium-to-high rise construction● High-speed duct system air conditioning● Kitchen exhaust
VERTICAL MULTISTAGE CENTRIFUGAL PUMPTERAL
ASVMApplication● Water supply and pressure boosting● Fire fighting systems● Boilers● Heat exchangers● Cooling towers and systems
● Water softeners and de-mineralization● Reverse Osmosis systems● Distillation systems● Ultra-filtration systems
Standard specificationsFluid temperature [°C]Material ASVMEnclosureAmbient temperatureMechanical Seal
: -15°C~120°C(No freezing): Stainless steel 1.4301/AISI304/SUS304: IP 55 (≤7.5kW) IP 54 (≥11kW): 50°C: Cartridge type SiC/SiC + Viton (Seal code : SQQV)
Impeller
LiquidDisc.diameter (mm)Output (kW)Solid passage (mm)
Impeller
MechanicalShaft
Casing
Mat
eria
lCo
vera
ge 50 · 80 · 1000.4~3.77~20
FC200PA(50APL-5.4(S)) · FC200(≥0.4kW)
SUS410 (0.4 · 1.1kW)SUS403 (1.5 · 3.7kW)
SIC/SIC
"Wastewater Sump drainage dewatering"
Semi-openEnclosed-channel (100APL-52.2(S))
APLWastewater pump
50 · 80 0.4~3.722~50FC200FC200
SUS410 (0.4 · 0.75kW)SUS403 (1.5 · 3.7kW)
SIC/SIC
Wastewater, Sewage water, Industrial wastewater
Vortex (APV)Semi-open (APVH, APVNH)
APVSewage pump
80 · 100 · 150 · 200 ·250 · 350 · 4001.5~4550~120FC200
FC200: ABO(E), ABOH / Heat treated FC200(ABOG,ABOC)
SUS420J2 (ABOE≥5.5kW, ABOG)SUS403 (ABOC, ABOH, ABOE≤3.7kW)
SIC/SIC
Wastewater, Sewage water
Semi-open (ABOC, ABOH)Enclosed-channel non-clog (ABO(E), ABOG)
ABOSewage pumpTERAL
www.alphagroup.co.th06 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
MULTISTAGE PUMP WILO
HELIX VApplication• Water supply and pressure boosting• Industrial circulation systems• Process water• Closed cooling circuits• Fire extinguishing systems• Washing systems• Irrigation
Technical data• Electrical connection: 3~400 V (±10 %), 50 Hz ≤ 4 kW 230 V/ 400 V; Δ/Y > 4 kW 400 V/ 690 V; Δ/Y• 1~ 230 V (±10 %), 50 Hz, only Wilo-Helix V 2, 4, 6, 10• Fluid temperature range: Helix V 2 – 16 (EPDM): -30 to 120 °C (130 °C on request) Helix V 2 – 16 for aggressive media (FKM): -15 to 90 °C Helix V22 – 52 (EPDM): -20 to 120 °C (130 °C on request) Helix V22 – 52 for aggressive media (FKM): -15 to 90 °C• Max. operating pressure: 16/25/30 bar• Max. inlet pressure of 10 bar• Protection class: IP 55• Max. ambient temperature: -15 °C – +50 °C (extended temperature ranges on request)• Available versions: Helix V 2 – 16: PN 16 with oval flanges, PN 25/PN 40 with round flanges according to ISO 2531 and ISO 7005 (Victaulic coupling on request) Helix V 22 – 52: PN 16/PN 25/PN 40 with round flanges according to ISO 2531 and ISO 7005
Corrosion-resistant impellers, guide vanes and stage housings
Equipment/function
MULTISTAGE PUMP WILO
MULTIVERT MVITechnical data• Electrical connection: 3~400 V (±10 %), 50 Hz ≤ 4 kW 230 V/ 400 V; Δ/Y > 4 kW 400 V/ 690 V; Δ/Y• Fluid temperature of -15 to +120 °C (with EPDM), (-15 to +90 °C with FKM)• Operating pressure max. 16/25 bar• Max. inlet pressure of 10 bar• Protection class IP 55• Flange connections:• MVI 70../95.. PN 16/PN 25: Round flange (DN 100)
Application• Water supply and pressure boosting• Fire extinguishing systems• Boiler feed• Industrial circulation systems• Process engineering• Cooling water circulation systems• Washing and sprinkling systems
MVI 70.. and 95..: PN16 and PN25 version with round flangeEquipment/function
MULTISTAGE PUMP WILO
ECONOMY MHI
H [m]
Technical data• Mains connection 1~230 V (±10 %), 50 Hz or optionally 220 V (±10 %), 60 Hz• Mains connection: 3~230 V (±10 %), 50 Hz (Δ) or optionally 265 V (±10 %), 60 Hz (Δ), 400 V (±10 %), 50 Hz (Y) or optionally 460 V (±10 %), 60 Hz (Y); same motor also: 3~220 V (±10 %), 60 Hz (Δ), 380 V (±10 %), 60 Hz (Y);• Fluid temperature of -15 to +110 °C• Max. operating pressure 10 bar• Max. inlet pressure of 6 bar• Protection class 1~: IPX4; 3~: IP54• Nominal diameters of pipe connections: Rp 1, Rp 1 ¼ or Rp 1 ½, depending on type
Application• Water supply and pressure boosting• Irrigation• Heating• In industrial systems (foodstuff industry, renewable energies,shipbuilding): Cooling and washing system
• Stainless steel in monobloc design• Threaded connection• Single-phase or three-phase AC motor• Single-phase AC motor equipped with built-in thermal motor protection (with automatic restart)
Equipment/function
www.alphagroup.co.th 07Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
RECIRCULATION PUMPWILO
RZPDiameter Q H T Speed
200 to 800 mmup to 7,000 m3/hup to 5 mup to +40oC180 - 1417 rpm
7000
5
m
m3/h0
Type: High flow, very low head
Liquid type: Wastewater, Activated Sludge
Application: Transfer of raw water, activated sludge, cooling water between nearby tanks
Materials: Casing: Cast IronPropeller: Stainless Steel or PURShaft seal: Mechanical Seal
Impeller Design: 2, 3 or 4-blade propeller
Special features: • direct driven or with planetary gear reducer
Motor: 3~: up to 18.5 kW
Submersible MixerDiameter: Motor: or
Speed: Thrust:
200 to 1200 mm4, 6, 8-pole direct drive2, 4, 6, 8-pole withplanetary gear-reducer98 - 1410 rpmmax. 3940 N
Flow GeneratorDiameter: Motor:
Speed: Thrust:
1600 to 2600 mm4, 6, 8-pole withplanetary gear-reducer24 - 77 rpmmax. 4030 N
WILO SUBMERSIBLE MIXER AND FLOW GENERATOR
TR , TREFluid Temp. +40oC Liquid type: Raw Wastewater, Activated Sludge
Application: Equalisation Basin, Denitrification basin, Bio-P removal, Sludge Storage Tank
Materials: Casing: Cast IronImpeller: Cast Iron, PUR or Stainless SteelShaft seal: Mechanical Seal
Impeller Design: 2 or 3-blade propeller
Special features: • self-cleaning propeller• ATEX or FM approval• series upgrading of motor to IE
Motor: up to 18.5 kW
PROPELLER PUMPWILO
KPRDischarge Q H T Speed
700 – 1100 mmup to 9,500 m3/hup to 8 mup to +40oC585 - 950 rpm
Type: High flow, low head pump
Liquid type: Clean water or water with fine particles
Application: Cooling water, rain water, flood prevention, irrigation
Materials: Casing: Cast IronPropeller: Stainless SteelMotor housing: Cast IronShaft seal: Mechanical Seal
Impeller Design: Axial Flow Impeller
Special features: • special coating• propeller angle adjustable by hand
Motor: 3~: up to 285 kW9500
8
m
m3/h0
www.alphagroup.co.th08 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
CONTRACTOR DRAINAGE PUMP WILO
KS
340
71
m
m3/h0
Discharge
Q H T Solids passage max.Speed
DN 1¼” – 6” Storz orhose connectionup to 340 m3/hup to 71 mup to +40oC45 mm2900 rpm
Type: Submersible drainage pump
Liquid type: Wastewater, Soiled water
Application: Excavation pit, basin and sump, flooded basins, fountains
Materials: Casing: Cast Iron or Aluminium Impeller: Cast Iron or Abrasite Motor housing: Aluminium or Cast-Iron
Shaft seal: Double Mechanical Seal
Impeller Design: Open Channel
Special features: abrasion resistant pump housing, option for Storz-coupling for pressure hose,high service life, slurping operation
Motor: 1~: 0.75 to 1.3 kW 3~: 0.75 to 22 kW
SPLIT CASE PUMP WILO
SCPDischarge Q H T Speed
DN 50 – 400up to 3400 m3/hup to 200 m-8oC to +120oC1000 - 3000 rpm
Type: Axial Split Case Pump
Liquid type: Clean water
Application: Cooling water, Water supply, Power plant, Industrial process water
Materials: Casing: Cast Iron, Nodular Cost Iron, Stainless SteelImpeller: Cast Iron, Stainless Steel, Bronze
Shaft seal: Mechanical Seal or Gland Packing
Impeller Design: Double Suction
Special features: Low vibration and low noise, some models double impeller
Motor: 3~: up to 630 kW3400
200
m
m3/h0
MEDIUM AND LARGE SEWAGE PUMP WILO
FADischarge Q H TSolids passage Speed
DN 80 – 600up to 7950 m3/hup to 95 m+3oC to +40oC45-200 mm585 to 2900 rpm
Type: Sewage pump
Liquid type: Wastewater, Sewage, Soiled Water
Application: Wastewater, Activated Sludge, Drainage
Materials: Casing: Cast Iron, Ductile IronImpeller: Cast Iron, Ductile IronMotor housing: Cast-Iron
Shaft seal: Mechanical Seal
Impeller Design: Vortex, Single -,Two – or Three-Channel, Solid
Special features: special materials, abrasion coating
Motor: 3~: 0.5 to 670 kW7950
95
m
m3/h0
www.alphagroup.co.th 09Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
LARGE BOOSTER SETSALMSON
N-ALTi, N-ELINOXHydroplus-NOS
Discharge DN 25 up to 200
Head and Flow depend on pumptype MULTi-H, MULTi-V, NOS, as well as number of pumps operating in parallel.
Booster Set can be configured according to your specifications:
Special features:
- two or more pumps- one or more control panels- pump control as per your requested operating strategy and set points- suction and discharge header with isolation valves included- with/without pressure tank
SALMSON PROCESS WATER PUMP
NOS: End-SuctionDischarge Q H p T Ambient T Speed
DN 32 up to 150 *up to 450 m3/hup to 150 mup to 16 bar-20oC to +170oCmax. +40oC1500, 3000 rpm
Type: Single-stage volute casing pump according to DIN EN 733
Liquid type: Clean water and slight polluted liquids
Application: Water Supply, industry, cooling water or heating water circuits.
Materials: Casing: Cast IronImpeller: Cast Iron, Bronze or AISI 304Shaft seal: Mechanical Seal or Gland Packing
Impeller Design: Radial Impeller
Special features: maintenance friendly. Removal of impeller without removal pump from pipes
Motor: up to 110 kW
* Extension range on request450
150
m
m3/h0
SMALL BOOSTER SETSALMSON
Hydromini-JETSONHydromini-MULTi-H
Discharge Q H p T Ambient T Speed
G1”up to 8 m3/hup to 55 mup to 10 barup to +35 oCmax. +40 oC3000 rpm
Type: Booster pump on small bladder tank
Liquid type: Clean water
Application: Domestic Water Supply, sprinkler, boosting pressure of inadequate town water supply.
Materials: see Multi-H and Jetson resp.
Impeller Design: Radial Impeller
Special features: bladder tank avoids frequent starting of pump
Motor: 1~: up to 1.5 kW 3~: up to 2.5 kW
85
5543
m
m3/h0
HYDROMINIJETSON
HYDROMINIMULTi-H
www.alphagroup.co.th10 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
SELF-PRIMING PUMP SALMSON
JETSONPorts Q H p T Ambient T SpeedSuction height:
G1”up to 5 m3/hup to 50 mup to 6 barup to +35oCmax. +40oC3000 rpmmax. 8 m
Type: Self-priming medium pressure centrifugal pump
Liquid type: Clean water
Application: Water supply boosting where suction tank lower than pump.
Materials: Casing: AISI 304Impellers: AISI 304Rubber: NBRShaft seal: mechanical seal
Impeller Design: Radial Impeller
Special options: PAC (automatic control and monitoring)Special features: easy to carry
Motor: 1~: 0.65, 0.75 kW 3~: 0.75, 1.1 kW5
50
m
m3/h0
MULTISTAGE PUMP SALMSON
MULTi-VPorts Q H p T Ambient T Speed
DN25 – DN 100up to 140 m3/hup to 240 mup to 25 bar-15oC to +120oCmax. +40oC1500, 3000 rpm
Type: Vertical, multistage, high pressure centrifugal pump
Liquid type: Clean water
Application: Water supply, boosting in high-rise buildings and industry.
Materials: Casing: AISI 304 / 316LImpellers: AISI 304 / 316LRubber: EPDM, VitonShaft seal: mechanical seal
Impeller Design: Radial Impeller
Special options: energy saving option with frequency inverter
Motor: 1~: up to 1.5 kW 3~: up to 45 kW
140
240
m
m3/h0
MULTISTAGE PUMP SALMSON
MULTi-HPorts Q H p T Ambient T Speed
G1¼” - G2”up to 25 m3/hup to 70 mup to 10 bar-15oC to +110oCmax. +40oC3000 rpm
Type: Horizontal, multistage, high pressure centrifugal pump
Liquid type: Clean water
Application: Water Supply (domestic and small commercial), RO, sprinkler.
Materials: Casing: AISI 304 / 316LImpellers: AISI 304 / 316LRubber: EPDM, VitonShaft seal: mechanical seal
Impeller Design: Radial Impeller
Special options: energy saving option with frequency inverter, PAC (Automatic control and monitoring)
Motor: 1~: up to 1.5 kW 3~: up to 2.5 kW25
70
m
m3/h0
www.alphagroup.co.th 11Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
OTHER PRODUCTSALMSON
This is a selection of the main pump types manufactured by Salmson, of which we have a selected range in stock.
Other products by Salmson:
Circulator Pumps
Solar-thermic Circulator Pumps
In-Line Circulating Pumps
Split Case Pumps
Superheated Water Pumps
Heat Transfer Fluid Pumps
Borehole Pumps
Vertical Sump Pumps
Self-Priming Dewatering Pumps
Chiller Pumps
SALMSON SMALL SEWAGE PUMP
Mini-SVO, SVO, SCADischarge:
Q H T Solids passage Speed
1¼”/1½”/DN 50–65DN 80 – 150 on requestup to 62 m3/hup to 22 m+3oC to +35oC35-48 mm3000 rpm
Type: Domestic drainage pump
Liquid type: Soiled water
Application: draining of infiltration water, swimming pool, fish pond
Materials: Casing: Cast Iron (Mini-SVO),Composite (SCA, SVO)Impeller: CompositeMotor housing: AISI 304 / 316L
Shaft seal: mechanical seal
Impeller Design: Vortex or Single Channel Impeller
Special options: SVO/SCA 206ATEX94/9/CE compliant
Motor: 1~: 0.55 to 1.5 kW 3~: 0.5 to 2.2 kW, up to 20 kW on request
6218
2210
m
m3/h0
MIN-SVO
SVO-SCA
DRAINAGE PUMPSALMSON
SUBSONDischarge:Q H T Solids passage max.Speed
G1” - G1¼”up to 15 m3/hup to 11 m+3oC to +35oC10 mm3000 rpm
Type: Domestic drainage pump
Liquid type: Soiled water
Application: draining of infiltration water, swimming pool, fish pond
Materials: Casing: AISI 304Impeller: NorylMotor housing: GFR-PPShaft seal: mechanical seal
Impeller Design: Semi-open Impeller
Special features: easy to carry, with Float Switch. Harsh water version available.
Motor: 1~: 0.25 to 0.55 kW
15
11
m
m3/h0
www.alphagroup.co.th12 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
NA
SINGLE STAGE PUMP GRUPPO ATURIA
Construction:- NA Pumps, centrifugal single stage horizontal, are designed according to DIN 24255 standards, in order to have maximum interchangeability between components.- The impeller is dynamically and hydraulically balanced.- The shaft is duly oversized to guarantee required stiffness and it is supported by grease lubricated sturdy ball bearings.- Mechanical seal. Characteristics:
Capacity up to 600 m3/hrDynamic head up to 95 mMax. suction press.: 4 barMax. operating pressure: 10 barWorking temp. from -10 oC to +130 oC
Materials: Pump casing: Cast IronImpeller: Cast IronCasing cover: Cast IronBearing housing: Cast IronPump shaft: Stainless Steel AISI420Mechanical Seal:Silicon Carbide/Silicon Carbide/NBR
VAB, VABX, TKV, PAG
TURBINE PUMP GRUPPO ATURIA
Column Ø Discharge Q H Ambient T Speed larger on request (PAG)
DN 90 – 360DN 80 – 300up to 2200 m3/hup to 400 mmax. 60 oC1500, 3000 rpm
Type: Vertical Turbine Pump
Liquid type: Soiled water
Application: Deep well, water intake, irrigation, drainage, flood prevention
Materials: Motor Support: Cast IronPump Stage Cast IronImpeller: Cast IronAxis Line: Steelnote: other materials on request
Impeller Design: Radial Impeller
Motor: up to 560 kW
larger on request
395
5000
m
m3/h
MULTISTAGE PUMP GRUPPO ATURIA
TK, TKR, VTKSuction Discharge larger sizes on requestQ H p T Ambient T Speed
DN 40 – 300DN 25 – 250
up to 840 m3/hup to 630 mup to 64 barmax. 130 oCmax. 40 oC1500, 3000 rpm
Type: Horizontal or Vertical multistage,high-pressure centrifugal pump
Liquid type: Clean water
Application: Boiler feed pump,other high pressure applications
Materials: Casing TK & VTK: Cast Iron GG25 TKR: Nodular Cast Iron all option: Stainless SteelImpeller: Cast Iron GG25,Stainless Steel, BronzeSealing: Gland Packing, Mechanical Seal, High Temperature Mech.Seal
Impeller Design: Radial Impeller
Motor: up to 700 kWlarger on request
400
400
TK & VTK
0
m
m3/h
630
840
TKR
www.alphagroup.co.th 13Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
FIRE FIGHTING SETGRUPPO ATURIA
Horizontal Split case Range Vertical Turbine Pump Range
FM Approved NFPA20 ApprovedEN 12845e EN 12259-12
HORIZONTAL FIRE PUMPS DIESEL ENGINE DRIVEN, F.M./U.L. APPROVED RANGE
Head
PSI
300
250
2005x46x5 PDN 150-300 H/L/M
PDN 200-300 M150 6x5
10x8100
12x10 12x1050
0
500 750 1000 1250 1500 2000 2500 3000 3500FlOW·RATE, USGPM
HORIZONTAL FIRE PUMPS ELECTRIC MOTOR DRIVEN, F.M./U.L. APPROVED RANGE
Head
PSI
300
250
200
PDN 150-300 H/L/MPDN 200-300 M
150 6x55x4
10x8 12x10 12x105x4
100
50
0
500 750 1000 1250 1500 2000 2500 3000 3500
FlOW·RATE, USGPM
VERTICAL PUMPS AT 1n0 RPM, F. M. APPROVED RANGE HEAD. PSI FLOW·RATE USGPM
Head
PSI
250
200
150 VAB 152VAB 180
VAB 180VAB 200
VAB 302VAB 251
VAB 302VAB 251
VAB 152 VAB 200 VAB 250
VAB 180
100 VAB 250 VAB 250 VAB 250 VAB 302
50
0500 750 1000 1250 1500 1750 2000 2250 2500 3000 3500
FlOW·RATE, USGPM
VERTICAL PUMPS AT 1n0 RPM, F. M. APPROVED RANGE HEAD. PSI FLOW·RATE USGPM
Head
PSI
250
200
150VAB 200 VAB 250
VAB 250VAB 152 VAB 152
VAB 180VAB 180 VAB 200
VAB 250 VAB 250 VAB 302
VAB 302VAB 302100 VAB 180
50
0500 750 1000 1250 1500 1750 2000 2500 3000 3500
FlOW·RATE, USGPM
PD
GRUPPO ATURIA SPLIT CASE PUMP
PD: Single stage, double suction, with horizontal shaft.
Field of application:
● aqueducts● irrigation● steel works● building yards● thermal power plants
These pumps are used in civil, industrial and farming facilities, especially for
Construction:The pump casing, split along the shaft axis, allows easy inspection and replacement of the rotating section. The position of inlet and outlet nozzies (in the lower half case of horizontal pumps or in the rear half case of vertical pumps) allows inspection and repair without removing the pump from its position.
Materials: Pump casing - cover: cast iron G25.Impellers: cast iron G25 or bronze BSZN5.Wear rings on pump casing: bronz or steel AISI 304.Shaft: steel C40.Shaft sleeves: steel AISI 420.Glands bushes: bronze.Packing ring: teflon rope.Gland: cast iron G25Bearings: high quality roller bearings.Bearing housing: cast iron G25Flexible coupling: cast iron with rubber inserts or with steel rods and rubber bushings. Dynamically balanced.
● sugar works● air conditioning● paper mills● fire fighting
ND
SINGLE STAGE PUMPGRUPPO ATURIA
Construction:ND are single centrifugal pumps with hydraulically balanced impeller, volute casing with end suction and top radial delivery, shaft with mechanical seal. The impellers, developed to be highly effcient, guarantee the most economic service.Standardisation of the common parts to a very high degreesimplifies spare parts storage.The UNI 2223/29 PN 16 pipe flanges are used for the standard construction; on request flanges accordingto ANSI 150 RF
Characteristics: Delivery: up to 1400 m3/hrTotal head: up to 140 mMax. work pressure: 20 barsTemperature: from -50 oC to +250 oCMax. speed: 3500 r.p.m.
Materials: - All parts in contact with pumpedliquid are in stainless steel AISI 316.- Bearing housing in cast iron.- Pump shaft in St.Steel AISI 316.On request we can supply pumps indifferent metallurgies relative to the pump liquid
Field of application: ● Industry● Petrochemical plants● Chemical plants● Hot pressurized water
● Transport● Distribution● Dowtherms
● Oil service● Refinery● Marine
www.alphagroup.co.th14 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
TJZ
CLOSE-COUPLED SELF-PRIMING SEWAGE PUMP TECHNO
PortsQ H Solids passage:T Ambient T Speed
RP 1½ – 4 (DN 40 - 100)up to 160 m3/hup to 25 m20 – 50 mmmax. 80 oCmax. 40 oC1450 - 2900 rpm
Type: Self-Priming Sewage Pump
Liquid type: Wastewater, Water with particles or fibres
Application: Wastewater, Sludge in wastewater treatment plants
Materials: Casing: Cast IronImpeller: Ductile Iron or Stainless SteelShaft: Stainless SteelSealing: Mechanical SealOther materials on request
Impeller Design: Semi-open
Special features: Close-Coupled, this no need for alignment after servicing
Motor: up to 15 kW160
25
m
m3/h0
TJ
SELF-PRIMING SEWAGE PUMP (MEDIUM-DUTY) TECHNO
SuctionDischarge Q HSolids passage: TAmbient T Speed
DN 25 – 300DN 25 – 250up to 1000 m3/hup to 62 m15 – 150 mmmax. 80 oCmax. 40 oC1450 - 2900 rpm
Type: Self-Priming Sewage Pump
Liquid type: Wastewater, Water with particles or fibres
Application: Wastewater, Sludge in wastewater treatment plants
Materials: Casing: Cast IronImpeller: Cast Iron or Stainless SteelShaft: Stainless SteelSealing: Mechanical SealOther materials on request
Impeller Design: Double-channel
Special features: High priming capability
Motor: up to 55 kW
1000
62
m
m3/h0
HEAVY DUTY SELF- PRIMING SEWAGE PUMP TECHNO
SPPortsQ H Solids passage:T Ambient T Speed
DN 50 – 250up to 760 m3/hup to 39 m38 – 76 mmmax. 40 oCmax. 40 oC650 - 2900 rpm
Type: Self-Priming Sewage Pump
Liquid type: Wastewater, Water with particles
Application: Wastewater, Sludge in wastewater treatment plants
Materials: Casing: Cast IronImpeller: Nodular Cast Iron or Stainless SteelShaft: Stainless SteelSealing: Mechanical SealOther materials on request
Impeller Design: Semi-open
Special features: Heavy duty execution
Motor: up to 75 kW
760
39
m
m3/h0
www.alphagroup.co.th 15Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
DZ, DZA
STAINLESS STEEL END-SUCTION PUMPTECHNO
130
70
m
m3/h0
DischargeQ H pT Ambient T Speed
DN 32 - 65up to 130 m3/hup to 70 mup to 10 barmax. 100 oCmax. 50 oC2900 rpm
Type: SS End-Suction Pump
Liquid type: Water or industrial fluids
Application: Water, Cooling Water, Industrial Water and Fluids
Materials: Casing: AISI 304, 316Impeller: AISI 304, 316Shaft: Stainless SteelSealing: Mechanical Seal
Impeller Design: Closed Impeller
Special features: maintenance friendly. Removal of impeller without removal pump from pipes
Motor: up to 30 kW
IH: End-Suction
TECHNO PROCESS PUMP OPEN/SEMI-OPEN IMP.
Discharge:QHp T(Special design up to +400oC) Ambient TSpeed
DN 25 up to 250up to 1200 m3/hup to 130 mup to 16 bar0 oC to +105 oC
max. +40 oC1500, 3000 rpm
Type: Single-stage volute casing pump according to DIN 24256 and ISO 2858
Liquid type: Clean media, slight polluted liquids, corrosive media
Application: Industrial Water Supply, industry, power plants.
Materials: Casing: Cast Iron GG25, SS 304/316 *Impeller: SS304/316 *Shaft seal: Mechanical Seal
Impeller Design: Radial Impeller,Open or Semi-Open
Special features: maintenance friendly. Removal of impeller without removal pump from pipes
Motor: up to 160 kW* Other materials on request
1200280
155
60
m
m3/h0
4-pole
2-pole
EA: End-Suction
PROCESS WATER PUMPTECHNO
Discharge:QHp T Ambient TSpeed
DN 32 up to 250up to 1100 m3/hup to 160 mup to 16 bar0 oC to +105 oCmax. +40 oC1500, 3000 rpm
Type: Single-stage volute casing pump according to DIN 24255
Liquid type: Clean water and slight polluted liquids
Application: Water Supply, industry, cooling water or heating water circuits.
Materials: Casing: Cast Iron GG25 *Impeller: Bronze, SS304 *Shaft seal: Mechanical Seal
Impeller Design: Radial Impeller
Special features: maintenance friendly. Removal of impeller without removal pump from pipes
Motor: up to 185 kW
* Other materials on request* Discharge DN 300 under development
1100500
155
4-pole
2-pole95
m
m3/h0
www.alphagroup.co.th16 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
TECHNO Booster
BOOSTER SET TECHNO
Techno Pumps builds the booster pump sets as per your request under TECHNO brand.Head and Flow depend on pump type installed, as well as number of pumps operating in parallel.
Special features: • Standard 2 pumps, expandable up to 4 pumps, and special systems up to 7 pumps
• Membrane pressure vessel of economic size or volume as per your preference
• One or more control panels
• Operating strategy as per your request, e.g. pressure switch, pressure transmitter,
level sensor, etc.
• Piping in Steel or Stainless Steel. Other materials on special request
• Suction and Discharge DN 25 up to 250, meeting the internationally used flow velocity
standards
• Pump isolation valves standard
• Suction and discharge headers of booster set with flanges or thread connection.
Booster set isolation valve shall be located on user's pipework to enable disconnection
of the booster set.
• Option for monitoring and/or control from the plant's control room
• Standard colours: Baseplate and piping: blue
Pump: original colour from manufacturer
Options to include in the Booster Set
www.alphagroup.co.th 17Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
Float Switch
LEVEL CONTROLREMOTO
Type: Micro-switch
Application: start or stop of sewage and drainage pumps
Special features: With internal counter weight
This Level Control is designed to solve all level wastewater situations,in a safe and economical way.
MECHANICAL SEAL / SPARE PARTTECHNO
We have a variety of mechanical seals available from our suppliers. Cartridge seals, or standard seals for pump, agitator, mixer.
Materials: SS 304 (option for SS316)EPDM or Viton rubberSeal surface: SiC/Carbon,SiC/SiC, Steel/Carbon
DIAPHRAGM PRESSURE VESSELAQUASYSTEM
Pressure TanksVolume:Vertical: Horizontal:Discharge:Pressure rating:T:
2 – 3000 L18 – 300 L¾“ - DN 658/10, 16, 25, 40 bar-10 - +100/110 oC
Type: Membrane Bladder Vessel
Liquid type: Clean water
Application: Expansion vessel in cold or hot water circuit
Special features: Horizontal or Vertical Tank.Large Vertical Tanks self supporting on legs.Vertical vessels up to 24L mounted on pipe.
Materials: Tank: Steel Stainless Steel or Galvanised Steel (option)Membrane Bladder: EPDM(drinking water application approved)
www.alphagroup.co.th18 Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
• Water or Fluid Transfer• Water Supply Boosting Set• Wastewater Pumping• Fire Fighting• Alarm• Generators
Materials: Enclosure:ABS: up to 11 kWSteel 15 kW and up, insome cases for lower ratings,soft-starter and inverter panels
Special features: • Special cabinets for 4 or more pumps• Special designs for higher motor ratings• Explosion proof cabinets
Motor: 230 V / 1~ up to 2.2 kW400 V / 3~ up to 220 kWSpecial voltages on request
Anti-Black Out Systems Photo-Voltaic and WindTurbine Battery Systems
Generators (gasoline and diesel)
Fire Pump Booster Sets
ALSO AVAILABLE FOURGROUP
Swimming Pool Pumps andControl Panels
CONTROL PANELS FOURGROUP
ElectronicControl Panels
Features• standard for 1, 2 or 3 pumps• 230 V / 1~, 400 V / 3~• IP 55 enclosure• Many standard options, such as timer, hour counter, emergency push button, alarm buzzer, alarm flashing light, etc.• Standard series with softstarter and inverter• Dedicated panels for various applications
Applications
www.alphagroup.co.th 19Tel: 02 792 9333 Email: sales@alphagroup.co.th Line ID: @alphagroup
PRODUCT OVERVIEW CATALOG
HIGH SPEED TURBO BLOWERINVENT
iTURBO®Overview of Advantages of the iTURBO®- Blower• Compact, light weight package for quick and simple installation• Integrated sound reducing with motor, turbo-impeller, VFD¹ and control system in a single compact package• Reduce operating cost by up to 30 % when compared to conventional blowers• Maintenance is limited to changing the air filters
Model iTB 30 iTB 50 iTB 75 iTB 100 iTB 150 iTB 200Length Dimension, L (mm) 1,300 1,300 1,460 1,460 1,925 1,925Width Dimensimon, W (mm) 800 800 900 900 1,000 1,000Height Dimension, H (mm) 1,200 1,200 1,400 1,400 1,650 1,650Flange Dimension, df (mm) 150 150 200 200 300 300Weight (kg) 530 550 580 600 900 950Pressure Range 40 kPa to 150 kPaInput Power (hp/kW) 30/25 50/42 75/63 100/84 150/126 200/168Supply Power/Network Frequency 380 - 580 V, 50 & 60 HzFlow Capacity 500 Nm³/h to 10,000 Nm³/h
Technical Data
¹ VFD: Variable Frequency Drive² PMSM: Permanent Magnet Synchronous Motor
• User friendly HD touch screen HMI• Customized turbo impellers provide peak efficiencies over the desired flow range• High speed PMSM² optimized for speed and torque control
INVENT AERATION DIFFUSER
iDiscOutside Diameter Air temp Bubble Size Air Flow Rate Performance
280 mm80 oC1 – 3 mm1 – 8 Nm3/h6.5 – 8.5 %/m
Type: Aeration Disc Diffuser
Liquid type: Wastewater, sludge, Activated Sludge
Application: Aeration Basin, aerobic sludge digester, equalisation basin in wastewater treatment plants
Materials: Body: GRPMembrane: EPDMAttachment: Wedge Clamp
Special features: Cleaning of fouling substances possible during operation possible by acid dosing.
Invent also manufactures Fine Bubble Tube, Panel (both bottom fixed and floating) and Coarse Bubble DiffusersSOTE determined at 4.2m subm. depth
MIXING AND AERATION SYSTEMINVENT
HCM / HCMA
200 2 4 6 8 10 12 14 16 181 3 5 7 9 11 13 15 17 19
2500
2300
2000
1500
1000
750
500
Basin Length or Basin Width [m]
Mix
er
Dia
me
ter
[mm
]
Mixer diameter vs. Tank Dimension
Diameter T Ambient T Max. water depth: Speed reduced to suitable speed by gearbox
500 to 2500 mmmax. 40 oCmax. 40 oC7 mMotor 1450 rpm,
Type: Hyperboloid mixer
Liquid type: Wastewater, Drinking water
Application: Denitrification basin, Bio-P removal, Sludge Storage Tank, Flocculation
Materials: Motor: Cast IronGearbox: Cast IronPropeller: PUShaft: FRP
Special features: Hyperboloid shape of mixer body leads to energy saving.Easy installation, no need to empty the basin.
Motor: up to 30 kW
Line ID: @alphagroup
Rayong Office188/131,129 Sukhumvit Rd., Maptaphut District,
Amphur Muang, Rayong 21150Tel:(038) 691-515
E-mail: rayong@alphagroup.co.th
Hat Yai Office192/4 Moo 2, Phetkasem Rd., Khuan Lung District,
Amphur Hat Yai, Songkhla 90110 Tel:(074) 552-672
E-mail: hatyai@alphagroup.co.th
Nakhon Ratchasima Office855/72 Suranarai Rd., Baankoh District,
Amphur Muang, Nakhon Ratchasima 30000Tel:(044) 371-105~6
E-mail: korat@alphagroup.co.th
Lampang OfficeTel:0-2792-9333
E-mail: lampang@alphagroup.co.th
139 Soi Nuanchan 34, Nuanchan Road,Nuanchan, Buengkum, Bangkok 10230
Tel: 02-792-9395 , 02-946-1740-2E-mail: sales@alphagroup.co.th
Head Office
Recommended