kndprasad01 documents

Testing of Curved Surfaces and or Lenses
Documents Testing of Curved Surfaces and or Lenses
Precesions Tooling for Polishing and Figuring Flat, Spherical and Aspheric Surfaces
Documents Precesions Tooling for Polishing and Figuring Flat, Spherical and Aspheric Surfaces
HW5 Tutorial on ISO 10110 Optical Drawing Standards
Documents HW5 Tutorial on ISO 10110 Optical Drawing Standards
The Effect of Crystallographic Orientation on Ductile Material Removal in Silicon
Documents The Effect of Crystallographic Orientation on Ductile Material Removal in Silicon
A Metrology Analysis of the Sphericity of the Prosthetic Femoral Head
Documents A Metrology Analysis of the Sphericity of the Prosthetic Femoral Head
Promyoo Thesis S'08
Documents Promyoo Thesis S'08
Newton Fringe Testing
Documents Newton Fringe Testing
Ultraprecision Machining in Opticsmanufacturing - 4M Workshop Sinaia 2008
Documents Ultraprecision Machining in Opticsmanufacturing - 4M Workshop Sinaia 2008
Rough Cutting of Germanium With Polycrystalline Diamond tool
Documents Rough Cutting of Germanium With Polycrystalline Diamond tool
Testing of nonlinear diamond-turned reflaxicons
Documents Testing of nonlinear diamond-turned reflaxicons
Load Effects on the Phase Transformation of Single-crystal Si During Nanoidentation Tests
Documents Load Effects on the Phase Transformation of Single-crystal Si During Nanoidentation Tests
Design and Use of a Cylindrical Coordinate Measuring Machine for Non-contact Roundness Measurement
Documents Design and Use of a Cylindrical Coordinate Measuring Machine for Non-contact Roundness Measurement
FTSS 2 Operators Handbook DOS
Documents FTSS 2 Operators Handbook DOS
MODELING OF VIBRATION IN SINGLE-POINT DIAMOND TURNING
Documents MODELING OF VIBRATION IN SINGLE-POINT DIAMOND TURNING
Electro Pneumatics Training
Documents Electro Pneumatics Training