2
High-quality broadband signals and stable access speeds are important for mobile service subscribers. Though some devices already come with 4G compatibility, signals may still be limited or blocked by buildings or environment obstacles. To address this, the ZyXEL LMT3313 LTE Small Cell CPE can be placed in homes or offices to provide superior coverage and seamless 4G connectivity that allows subscribers to access a wide range of services and applications anytime, anywhere. Benefits Enhanced indoor coverage of both 4G voice and LTE mobile data Band 3 (1.8 GHz) and band 7 (2.6 GHz) are mainstream LTE frequencies utilized worldwide; however LTE services may suffer significant RF penetration loss in homes, offices or public areas. The ZyXEL LMT3313 LTE Small Cell CPE not just provides an effective solution for enhanced indoor coverage and better voice quality, but also offers high-performance mobile 4G data throughput to enhance signal reliability for homes and businesses. Increased system capacity by traffic offloading Subscribers living in a large service zone with high population density may experience intermittent macro base station capacity and QoS outage due to traffic overloads. The ZyXEL LMT3313 can easily offload both voice calls and mobile data from home mobile devices to the existing home broadband networks; as such the home broadband becomes the backhaul of LMT3313 to prevent overwhelming traffics from flowing into the macro base station. This allows mobile operators to deliver the best services for both residential and roaming users simultaneously. Reduced total cost by leveraging home infrastructure The backhaul cost of each macro base station as well as the rent for installation sites and power supply structures comprise the largest part of operating expenses of mobile networks. The ZyXEL LMT3313 not only leverages the existing home broadband services such as DSL or cable network to reduce the backhaul cost, but also allows users to flexibly install the devices to serve the entire home and to blend them into home environments easily. Easy deployment with plug-and-play design The ZyXEL LMT3313 is designed with auto-provisioning and optimization for easy plug-and-play with no effort from the subscriber side. Remote firmware upgrades can also be performed automatically to reduce support calls for the SI (System Integrator) or SP (Service Provider) staff. 3GPP release 9 compliance Supports Voice over LTE and CSFB • Auto-provisioning and optimization (plug-and-play) • TR-069/196 remote management and firmware update Access control and congestion control Handover between macro cell and small cell Small cell to small cell handover Rapid Deployment of Ultra-fast 4G Broadband Connectivity LMT3313 LTE Small Cell CPE

ZyXEL LMT3313 LTE Small Cell CPE

Embed Size (px)

Citation preview

Page 1: ZyXEL LMT3313 LTE Small Cell CPE

High-quality broadband signals and stable access speeds are important for mobile service subscribers. Though some devices already come with 4G compatibility, signals may still be limited or blocked by buildings or environment obstacles. To address this, the ZyXEL LMT3313 LTE Small Cell CPE can be placed in homes or offices to provide superior coverage and seamless 4G connectivity that allows subscribers to access a wide range of services and applications anytime, anywhere.

Benefits

Enhanced indoor coverage of both 4G voice and LTE mobile dataBand 3 (1.8 GHz) and band 7 (2.6 GHz) are mainstream LTE frequencies utilized worldwide; however LTE services may suffer significant RF penetration loss in homes, offices or public areas. The ZyXEL LMT3313 LTE Small Cell CPE not just provides an effective solution for enhanced indoor coverage and better voice quality, but also offers high-performance mobile 4G data throughput to enhance signal reliability for homes and businesses.

Increased system capacity by traffic offloadingSubscribers living in a large service zone with high population density may experience intermittent macro base station capacity and QoS outage due to traffic overloads. The ZyXEL LMT3313 can easily offload both voice calls and mobile data from home mobile devices to the existing home broadband networks; as such the home broadband becomes the backhaul of LMT3313 to prevent overwhelming traffics from flowing into the macro base station. This allows mobile operators to deliver the best services for both residential and roaming users simultaneously.

Reduced total cost by leveraging home infrastructureThe backhaul cost of each macro base station as well as the rent for installation sites and power supply structures comprise the largest part of operating expenses of mobile networks. The ZyXEL LMT3313 not only leverages the existing home broadband services such as DSL or cable network to reduce the backhaul cost, but also allows users to flexibly install the devices to serve the entire home and to blend them into home environments easily.

Easy deployment with plug-and-play designThe ZyXEL LMT3313 is designed with auto-provisioning and optimization for easy plug-and-play with no effort from the subscriber side. Remote firmware upgrades can also be performed automatically to reduce support calls for the SI (System Integrator) or SP (Service Provider) staff.

• 3GPP release 9 compliance

• Supports Voice over LTE and CSFB

• Auto-provisioning and optimization (plug-and-play)

• TR-069/196 remote management and firmware update

• Access control and congestion control

• Handover between macro cell and small cell

• Small cell to small cell handover

Rapid Deployment of Ultra-fast 4G Broadband Connectivity

LMT3313LTE Small Cell CPE

Page 2: ZyXEL LMT3313 LTE Small Cell CPE

RF Bands• 4G operation bands: band 3 (1800 MHz) or

band 7 (2600 MHz) software selectable

• 4G listening bands: band 3 (1800 MHz), band

7 (2600 MHz)

• 3G listening bands: band 1 (2100 MHz), band

3 (1800 MHz) and band 8 (900 MHz)

Self Configuration• Fixed or automatic transmit power control

• Automatic load control

IP Networking• PPPoE for backhaul connection

• DHCP client

• IPv4

LMT3313LTE Small Cell CPE

Specifications

Application Diagram

Management • Femto indication to indicate the FAP

connection of subscribers

• System log for trouble shooting

• TR-069 for centralized management

• F/W remote upgrade

Security• Access control for the subscriber access

• Device location lock

• IPSec, IKEv2

Hardware Specifications• Max Tx power: 24 dBm

• Embedded antenna: -2 dBi (average gain)

• 2 Ethernet connector: 100/1000BASE-T auto

MDI/MDIX (RJ-45 plug)

• LEDs: Power status, Internet, Small cell service,

Small cell use

• Reset to factory defaults

• Power On/Off button

Power Specifications• External power supply: 12 V/2 A

• PoE: 802.3at compliant

• Power consumption: <16 W

Physical Specifications• Dimensions (WxDxH):

202 x 157 x 32 mm (7.95" x 6.18" x 1.26")

• Weight: 450 g (0.99 lb.)

Environmental Specifications

Operating Environment

• Temperature: -5°C to 45°C (23°F to 113°F)

• Humidity: 10% to 90% (Non-condensing)

Storage Environment

• Temperature: -20°C to 50°C (-4°F to 122°F)

• Humidity: 10% to 95% (Non-condensing)

Regulatory Specifications• CE

F o r m o r e p r o d u c t i n f o r m a t i o n , v i s i t u s o n t h e w e b a t w w w . Z y X E L . c o m

Copyright © 2015 ZyXEL Communications Corp. All rights reserved. ZyXEL, ZyXEL logo are registered trademarks of ZyXEL Communications Corp. All other brands, product names, or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.

5-100-01415006 05/15

IT Telephony Service Provider

Internet

LTEMacro Cell

LMT3313LTE Small Cell CPE

LaptopTablet PC

Laptop Laptop

Tablet PC

Smartphone

Smartphone

Ethernet Backhaul

Ethernet Backhaul

LMT3313LTE Small Cell CPE

CoreNetwork

Home

Office

LTE