Upload
continuent
View
517
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Are you unsure of the steps needed to get your Continuent Tungsten cluster up-and-running? In this live virtual course, we will teach you how to get from a single database server to a scalable cluster, or from a brittle MySQL replication system to a transparent, manageable Tungsten cluster. We will discuss the benefits of leveraging Continuent Tungsten clustering with MySQL, and walk you through the steps to implement a Tungsten cluster in Amazon EC2. We'll cover the prerequisites, installing and configuring Tungsten, and best practices that are part of most production installations and proof-of-concepts. Course Topics: - Configuring MySQL and the OS for proper installation - Installing a cross-site cluster - Schema upgrade on the master database server with minimal application downtime (switch operation) - Automated failover when a MySQL database server crashes - Recovery of a failed master to a fully operational slave with a single command (recover operation) - Switching database operations to a remote site (geo-clustering, cross-site 'switch' operation) We will also discuss and demonstrate basic operations, such as adding and removing a cluster node, basic monitoring and troubleshooting, and discuss the basic failure scenarios. Learn how to quickly configure and provision highly optimized Continuent Tungsten deployments in the cloud or on-premises.
Citation preview
©Continuent 2013
Tungsten University: Configure & Provision
Tungsten ClustersJe! Mace, Director of Services
Robert Hodges, CEO
©Continuent 2013
About Continuent
• The leading provider of clustering and replication for open source DBMS
• Tungsten Clustering - Commercial-grade HA, performance scaling and data management for MySQL
• Tungsten Replication - Flexible, high-performance replication
2
©Continuent 2013
Introducing Tungsten
3
©Continuent 2013
Application Application
Replicator Replicator Replicator
MySQL Client API MySQL Client API
MasterSlave Slave
Existing MySQL Replication
4
©Continuent 2013
Application Application
Replicator Replicator Replicator
MySQL Client API MySQL Client API
MasterSlave Slave
Step 1: Replace MySQL Replication
5
©Continuent 2013
Application Application
Replicator Replicator Replicator
MySQL Client API MySQL Client API
Manager Manager Manager
MasterSlave Slave
Step 2: Add Manager Process
6
©Continuent 2013
Application Application
Replicator Replicator Replicator
Manager Manager Manager
Tungsten Connector Tungsten Connector
MasterSlave Slave
Step 3. Add Intelligent Connector
7
©Continuent 2013
Data Service
Application
Replicator Replicator Replicator
Application
Manager Manager Manager
Monitoring and control
Monitoring and control
MasterSlave Slave
Step 4. Connector Connectivity and Communication
Tungsten Connector Tungsten Connector
8
©Continuent 2013
Application Application
NYC
©Continuent 2013 10
Manual Failover
NYC London
©Continuent 2013
Evaluating Tungsten
• Con"guring servers
• Viewing cluster status
• Connectivity
• Testing cluster operations
• Next steps
• Questions
11
©Continuent 2013
Con"guring Servers
12
©Continuent 2013
Create a Security Group
• Create a security group for all Tungsten servers
• It should be created in the AZ you will use for servers
13
All TCP traffic within the security groupAll UDP traffic within the security groupAll ICMP traffic within the security groupTCP port 22, 9999 and 13306 from '0.0.0.0/0'
©Continuent 2013
Launch Servers
• Create 4 EC2 servers in a single AZ
• They should be m1.large or greater
• Use the Amazon Linux AMI
• Set the root volume to be large enough for your test data set
14
©Continuent 2013
Logging Into the Servers
# SSH access must be done to the ec2-user account$> ssh [email protected]
# Then use sudo to gain access to the root user$ ip-184-72-189-135> sudo su -
15
©Continuent 2013
Set Server Hostnames
# We will use the following hostnames# db1.nyc.tu# db2.nyc.tu# db1.london.tu# db2.london.tu
$ ip-184-72-189-135> hostname db1.nyc.tu$ ip-184-72-189-135> sed -i "/^HOSTNAME=/c\HOSTNAME=`hostname`" /etc/sysconfig/network
# You must logout completely and back in # for the change to take effect
16
©Continuent 2013
Modify /etc/hosts
• Add entries to /etc/hosts on each server
• Use the private IP address for each host
17
$ db1> /sbin/ifconfig eth0 | grep "inet addr" inet addr: 10.112.24.214 Bcast: 10.112.25.255 Mask:255.255.254.0
$ db1> echo "10.112.24.214 db1.nyc.tu10.10.219.125 db2.nyc.tu10.10.102.83 db1.london.tu10.112.74.196 db2.london.tu" >> /etc/hosts
©Continuent 2013
Install Software Packages
$ db1> yum -y install mysql-server which curl bc rsync wget java-1.6.0-openjdk ruby
$ db1> rpm -i http://www.percona.com/redir/downloads/XtraBackup/LATEST/RPM/rhel6/x86_64/percona-xtrabackup-2.0.4-484.rhel6.x86_64.rpm
18
©Continuent 2013
Create MySQL Users
$ db1> mysql -e "grant all on *.* to 'tungsten'@'%' identified by 'secret' with grant option"
$ db1> mysql -e "grant all on *.* to 'app'@'%' identified by 'secret'"$ db1> mysql -e "revoke super on *.* from 'app'@'%'"
$ db1> mysql -e "delete from mysql.user where user=''"$ db1> mysql -e "flush privileges"
19
©Continuent 2013
Rinse & Repeat
• The requirements must be completed on each server
• Use a di!erent server-id
• Use the same SSH id_rsa and id_rsa.pub
• Full details at https://docs.continuent.com/wiki/display/TEDOC/System+Requirements
• Sample script available athttps://docs.continuent.com/wiki/display/TEDOC/Preparing+EC2+Servers
20
©Continuent 2013
Installation
21
• Installation completed from a staging directory using tungsten-cookbook or tpm
• tungsten-cookbook runs tpm plus some additional tests
• Staging con"guration stored in $CONTINUENT_PROFILES
©Continuent 2013
Installation
$ db1> cd /opt/continuent/software
$ db1> wget http://dev.mysql.com/get/Downloads/Connector-J/mysql-connector-java-5.1.22.tar.gz/from/http://cdn.mysql.com/$ db1> tar zxf mysql-connector-java-5.1.22.tar.gz
# Upload the software to /opt/continuent/software on db1$ db1> tar zxf continuent-tungsten-2.0.1-662.tar.gz$ db1> cd continuent-tungsten-2.0.1-662
# See the next slides for USER_VALUES.sh content$ db1> vi cookbook/USER_VALUES.sh
$ db1> ./cookbook/tungsten-cookbook sor --run-test# Fix any errors and repeat the command until success
$ db1> . /opt/continuent/share/env.sh
22
©Continuent 2013
Installation
23
• Installation completes several steps
• Copy software to each server
• Validate con"guration
• Write con"guration "les
• Start services
©Continuent 2013
Viewing Cluster Status
24
$ db1> trepctl status
$ db1> cctrl -multiTungsten Enterprise 1.5.3 build 59connect to '[email protected]'usa: session established
[LOGICAL] / > ls
[LOGICAL] / > use usa[LOGICAL] /usa > ls
[LOGICAL] /usa > use europe[LOGICAL] /europe > ls
[LOGICAL] /europe > use world[LOGICAL] /world > ls
©Continuent 2013
Connectivity
25
$ db1> mysql -h`hostname` -P9999 -uapp -pmysql> select @@hostname;
[LOGICAL] /usa > switchmysql> select @@hostname;
mysql> begin;mysql> select @@hostname;[LOGICAL] /usa > switchmysql> select @@hostname;
©Continuent 2013
Cluster Operations
26
©Continuent 2013
Switching the Master Server
27
$ db1> cctrl -multi[LOGICAL] /> use usa[LOGICAL] /usa> switch[LOGICAL] /usa> ls
[LOGICAL] /usa> switch to db1.nyc.tu[LOGICAL] /usa> ls
[LOGICAL] /usa> use world[LOGICAL] /world> ls
[LOGICAL] /world> switch to europe[LOGICAL] /world> ls
[LOGICAL] /world> use europe[LOGICAL] /europe> ls
©Continuent 2013
Automatic Failover
$ db1> cctrl -multi[LOGICAL] /> use europe[LOGICAL] /europe> lsmysql> select @@hostname for update;
$ db1> ssh db1.london.tu sudo /sbin/service mysqld stop[LOGICAL] /europe> lsmysql> select @@hostname for update;
$ db1> ssh db1.london.tu sudo /sbin/service mysqld start[LOGICAL] /europe> datasource db1.london.tu recover[LOGICAL] /europe> ls
[LOGICAL] /europe> switch to db1.london.tu[LOGICAL] /europe> ls
28
©Continuent 2013
Online Upgrades
29
©Continuent 2013
Rolling Upgrade and Maintenance
30
Final UpgradeSwitchSlave Upgrade Slave Upgrade
1. Run backup2. Shun slave3. Run upgrade4. Welcome slave
1. Shun/upgrade/welcome
1.Shun/upgrade/welcome
1.Switch master
©Continuent 2013
Upgrade the Slaves
31
[LOGICAL] /usa> switch to db1.nyc.tu[LOGICAL] /usa> datasource db2.nyc.tu backup[LOGICAL] /usa> datasource db2.nyc.tu shun$ db1> mysql -hdb2.nyc.tu -P13306 -utungsten -p
mysql> # Apply backwards compatible changes to db2.nyc.tu
# If unsuccessful[LOGICAL] /usa> datasource db2.nyc.tu restore# Restart the process
# If successful[LOGICAL] /usa> datasource db2.nyc.tu welcome# Repeat the above steps for all slaves
©Continuent 2013
Upgrade the Master
[LOGICAL] /usa> switch to db2.nyc.tu[LOGICAL] /usa> datasource db1.nyc.tu backup[LOGICAL] /usa> datasource db1.nyc.tu shun$ db1> mysql -hdb2.nyc.tu -P13306 -utungsten -p
mysql> # Apply backwards compatible changes to db1.nyc.tu
# If unsuccessful[LOGICAL] /usa> datasource db1.nyc.tu restore# Restart the process
# If successful[LOGICAL] /usa> datasource db1.nyc.tu welcome[LOGICAL] /usa> switch to db1.nyc.tu
32
©Continuent 2013
Puppet & RPM Installation
$> cat /etc/tungsten.ini[defaults]...replication-password=secretreplication-port=13306replication-user=tungsten...[usa]master=db1.nyc.tumembers=db1.nyc.tu,db2.nyc.tu...$> rpm -i ~/continuent-tungsten-2.0.1-662.rpm
33
©Continuent 2013
Next Steps
• Register at http://www.continuent.com/downloads/software
• Initiate a POC with Continuent
• Testing production hardware and data sets
• Application testing
• Integration into monitoring and alerting
• Training for operations personnel
34
©Continuent 2013
Wrap-Up and Questions
35
©Continuent 2013
More Webinars!
37
• Setup & Operate Tungsten Replicator - Thursday, October 17 @ 10 am PT/1 pm ET
• How Gittigidiyor (Subsidiary of eBay) Replicates in Real Time from MySQL to Oracle - Wednesday, November 6th @ 10:00 EDT/ 15:00 BST/16:00 CEST/17:00 EEST
©Continuent 2013 38
Continuent Website:http://www.continuent.com
Tungsten Replicator 2.0:http://code.google.com/p/tungsten-replicator
Our Blogs:http://scale-out-blog.blogspot.comhttp://datacharmer.blogspot.comhttp://flyingclusters.blogspot.comhttp://continuent-tungsten.blogspot.com
560 S. Winchester Blvd., Suite 500 San Jose, CA 95128 Tel +1 (866) 998-3642 Fax +1 (408) 668-1009e-mail: [email protected]