Upload
teddy-pai
View
202
Download
1
Embed Size (px)
DESCRIPTION
First step.Getting last correct.
Citation preview
A trial and test for new last modification of Mukluk Boot.
1.Searching for a proper last which contains the same inside volume of original mukluks boot vibram and reflects characters of toe shape, ball , and heel .
2.Based on the both important elements in technical key factors, modifications on last, pattern and fit are improved and closed to same look of original mukluk accordingly.3.The fit test report are purely for technical demands and inputs. These are not yet
ready for final assessment of product values or critics. These are for the direction of modification to finalize a GOOD last in look and fit to build our MUKLUK to fit in more
fashion trends markets.
First of all, picking up a good last is most important basis to start all technically engineeringmodifications related especially in a mature product in market for a long while.
The fit testing data of original boot will be reflected to further last corrections to get a better fit and cosmetic look for our aboriginal product line.
Normally medial /inside of human feet is longer than lateral/outside. If not , two results will occur. The toe will be twisted towards inside so reversed on upper and waist of outside has too much space,empty.
I think new last modifications collected fit data from original and new samples will present a best fit and look based on aboriginal crafts and lasted characters. New sample will be finished and sent to office on Wednesday.