Upload
kristal-snider
View
279
Download
3
Tags:
Embed Size (px)
DESCRIPTION
An Overview of Historical Trends Relating to Suspect Counterfeit, Non-Conforming and High Risk Electronic Components
Citation preview
AN OVERVIEW OF HISTORICAL TRENDS RELATING TO SUSPECT COUNTERFEIT, NON-CONFORMING AND HIGH RISK ELECTRONIC COMPONENTSMark Snider, President, ERAI, Inc.
SAE INTERNATIONAL
• Founded in 1995, ERAI is an information services organization that monitors, investigates and reports issues affecting the global electronics supply chain.
• ERAI provides tools to mitigate risks on substandard parts, counterfeit parts, vendors and even customers.
• ERAI operates and maintains the world’s largest database of non-conforming material.
• Subscribers include all sectors of the global semiconductor supply chain.
• Actively involved in a number of committees and task forces addressing the counterfeit issue.
Introduction to ERAI, Inc.
2
SAE INTERNATIONAL
In June 2007 The US Department of the Navy (NAVAIR) asked the Bureau of Industry and Security’s Office of Technology and Evaluation to conduct a defense industrial base assessment of counterfeit electronics.
NAVAIR suspected an increasing number of counterfeit/defective parts were infiltrating the DoD supply chain and sought to verify and quantify their suspicions.
BIS Study – June 2007
3
SAE INTERNATIONAL
Survey Period
• 2005-2008
Data Source
• 387 companies representing 5 segments of the supply chain
– 83 OCMs – 98 distributors and brokers (45 authorized | 53 unauthorized)– 32 circuit board assemblers – 121 prime contractors and subcontractors – 53 Department of Defense (DoD) agencies
BIS Data Source & Survey Period
4
SAE INTERNATIONAL
Data was collected under authority delegated to the U.S. Department of Commerce under Section 705 of the Defense Production Act of 1950, as amended (50 U.S.C. App. Sec. 2155) and Executive Order 12656.
What We Discover When Information Sharing Is Not Optional:39% encountered counterfeit electronics during the 4 year period
5
50% of OCMs encountered
counterfeit parts
26% of DOD agencies
encountered counterfeit parts
55% of distributors encountered
counterfeit parts26% of prime contractors and subcontractors encountered
counterfeit parts 34% of circuit board assemblers encountered
counterfeit parts
SAE INTERNATIONAL
29,910 Counterfeit Encounters Reported- BIS Study 2005-2008 | 90% from OCMs
6
2005 2006 2007 20080
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
3369
7295 74868644
454
750938
613
OCMs Distributors (AD & ID) Circuit Board AssemblersPrime Contractors DOD
OCM = 26,794
Distributors = 2,755
CB Assemblers = 154
Prime Contractors = 207
DOD = ?
26% (14 out of 53) of the DoD agencies sur-veyed encountered counterfeits. The inci-dents were not tracked. The number of inci-dents is unknown.
Coun
terf
eit P
art E
ncou
nter
s
SAE INTERNATIONAL
2,528 Counterfeit or Nonconforming Incidents- ERAI & GIDEP 2005-2008
7
SAE INTERNATIONAL
NDAA – July 8, 2013
8
SAE INTERNATIONAL
DFARS – May 6, 2014
9
SAE INTERNATIONAL
• The training of personnel.
• The inspection and testing of electronic parts, including criteria for acceptance and rejection.
• Processes to abolish counterfeit parts proliferation.
• Processes for maintaining electronic part traceability.
• Use of suppliers that are the original manufacturer, sources with the express written authority of the original manufacturer or current design activity, including an authorized aftermarket manufacturer or suppliers that obtain parts exclusively from one or more of these sources.
DFARS Requirements
10
SAE INTERNATIONAL
• The reporting and quarantining of counterfeit electronic parts and suspect counterfeit electronic parts.
• Methodologies to identify suspect counterfeit electronic parts and to rapidly determine if a suspect counterfeit electronic part is, in fact, counterfeit.
• Design, operation, and maintenance of systems to detect and avoid counterfeit electronic parts and suspect counterfeit electronic parts.
• Flow down of counterfeit detection and avoidance requirements.
DFARS Requirements
11
SAE INTERNATIONAL
• Process for keeping continually informed of current counterfeiting information and trends.
• Process for screening the Government-Industry Data Exchange Program (GIDEP) reports and other credible sources of counterfeiting information.
• Control of obsolete electronic parts.
DFARS Requirements
12
SAE INTERNATIONAL
Trends cannot be accurately measured without industry-wide cooperation and participation.
Data sharing is vital to the effectiveness of ERAI & GIDEP.
Data Sharing is Vital
13
SAE INTERNATIONAL
ERAI & GIDEP Historical Data Reporting Trend
14
SAE INTERNATIONAL
Does Counterfeit Activity Fluctuate along with Market Demand?
15
SAE INTERNATIONAL
ERI Reported Parts 10-year Linear Trend2003-2014
16
SAE INTERNATIONAL
ERAI Most Frequently Reported Part Types
17
SAE INTERNATIONAL
ERAI Reported Part Types Trend Over Time
18
SAE INTERNATIONAL
ERAI Obsolescence Trend
19
SAE INTERNATIONAL
ERAI Obsolescence Trend
20
SAE INTERNATIONAL
ERAI Obsolescence Incidence
21
SAE INTERNATIONAL
ERAI & GIDEP Reporting Trends Post DFARS
22
SAE INTERNATIONAL
It is widely stated that counterfeiters are evolving their processes; however, the incidents being reported to ERAI and GIDEP are detected using widely accepted screening processes like those called out in AS5553-A, AS6081, CCAP-101, IDEA-STD-1010-B, etc.
How are Most Counterfeits Identified?- Are Counterfeits Slipping through the Cracks?
23
Are more sophisticated counterfeit parts slipping through the cracks?
SAE INTERNATIONAL
Revisions to the ERAI Nonconforming Parts Database provide:
– Standardized language to be used throughout the entire supply chain.
– Measurable data set.– Searchability by
nonconformance type.– Photo library by
nonconformance type.– Downloadable
Screening Checklist.
ERAI Counterfeit Data Standardization
24
SAE INTERNATIONAL
• Counterfeit incidents appear to have a correlation to market fluctuations.
• Today the majority of reported counterfeits have a direct correlation to component obsolescence.
• Counterfeit trends are relatively consistent over time.
• Data trends can help us with assumptions not conclusions.
• Despite being encouraged to voluntarily report, data is not being widely shared.
ERAI Data Trends Conclusions
25
SAE INTERNATIONAL
Send questions and requests for information to:
THANK YOU
26
Follow ERAI on Slideshare
Like ERAI on Facebook
Follow ERAI on Twitter (@ERAI_Inc)
Join- ERAI: Counterfeit Part Avoidance, Detection, Disposition and Reporting