Steps To Connect A Wireless HP

Printer

HP is considered as one of the best and finest system and printer makers. It always

provides its users with the latest technology. One such advanced technology which HP is providing the Wireless printers. Yes, you no longer have to depend on wires to connect your printer to the system. With the help of wireless signal, you will easily connect the device to your system. You can place your

printer anywhere and can connect it through the wireless signal.

These wireless printers can be set up using a wireless router. It is a very simple process to connect your wireless printer to the system.

For this, you have to follow some simple steps provided by HP printer support number. Just follow these instructions and you will be

able to connect the printer without taking much time. While following this procedure, if you face any problem in any step, you can simply contact the HP printer support

Australia.

They will resolve your problem in a quick time frame. Before starting the procedure there are certain things you may need which are

as follows.

•USB installation cable•HP wireless printer•Wireless router•Computer with wireless card

1. First, you have to ensure that the wireless router is turned on and check that your wireless card of the computer is active or not. Now, you have to insert the setup CD of HP which is provided to you along with the printer. If you are a Mac user then you have to connect the USB cable first. Wait for the CD menu to appear. After that, click on the "Wireless Device/Install Network". Now, follow the onscreen instructions.

Connecting HP Printer Using Wireless Router

2. In this step, you have to connect the USB installer cable to your system and the printer when the installer will ask you to do so.

3. Wait and click on the 'Finish' button to complete the installation process. To check, whether the printer is connected successfully, first open a document and print it.

1. First, you have to ensure that the wireless signals of both the system and the printer are active.

2. Now, open the 'Control Panel' on your system and choose the 'Network and Internet' option.

Installing Wireless HP Printer Using AD-HOC Network

3. In this step, under the 'Network and Sharing Centre ‘link, click on the 'Connect to a Network' option.

4. A list of available networks will be displayed out of which you have to select the 'hp-setup' network.

5. Now, install the printer software by following the above procedure. To check, open the document and print it.

In this article, you will get some easy steps to connect a wireless HP printer to your system provided by HP printer support

number. You just have to follow these steps and your printer will be connected

successfully without using any cables.

If any issues regarding Printer So just call at Hp printer Support Number

Australia +61-283206004

Original Source:

http://www.imfaceplate.com/hpprinterau/steps-to-connect-a-wireless-hp-printer