Upload
ashok-singh
View
46
Download
0
Embed Size (px)
Citation preview
PROGRAM:-3AIM:Program for the generation of unit impulse signal.
TOOLS REQUIRED:P.C , matlab 7.0
PROGRAM:t=-2:1:2;>> y=[zeros(1,2),ones(1,1),zeros(1,2)];>> stem(t,y);>> ylabel('amplitude');>>xlabel(‘n’)
OBSERVATION:
RESULT:Desired waveform has been obtained.
PRECAUTION:1. Observe the waveform carefully.2. Take the value of constant keeping care of all constraint.