2
If you read this article online, please Click here Mod. NEW1009 Rev. 0 SatrindTech Srl - Article September 2016 Dear Customer, SatrindTech Shredder installed in a line of cardboard recovery in Belgium 2014 statistics processed by CEPI (Confederation of European Paper Industries), indicate that in Europe almost 7 million tonnes of cardboard are consumed (www.cepicartonboard.com/?section=some_market_statistics). This material, used mostly in the packaging sector, can be reused many times (usually up to 6) and 54% of it is comprised of recycled material (www.cepicartonboard.com/?section=cartonboard_production). During this past August a two-shaft shredder was delivered in Belgium. It is a hydraulic model K 13/50, equipped with special hopper and hydraulic presser, which will be used as a primary element of a shredding and compacting line of cardboard packaging, designed to process 1.5 t/h. The K 50 HP series hydraulic shredders, used for the volumetric reduction of materials, allow the processing of up to 3 t/h of waste and industrial products such as cardboard packaging, plastic and metal drums, cubitainers, plastic, electronic waste, pallets and food scraps, as well as SUW, ELT and RDF. SatrindTech S.r.l. - Via Monfalcone, 122 - 20010 Arluno (MI) Italia www.satrindtech.com | [email protected] | +39 02 9037 6683 | +39 02 9037 6721

SatrindTech Shredder installed in a line of cardboard recovery in Belgium

Embed Size (px)

Citation preview

If you read this article online, please Click here

Mod. NEW1009 Rev. 0

SatrindTech Srl - Article September 2016

Dear Customer,

SatrindTech Shredder installed in a line of cardboard recovery in Belgium 2014 statistics processed by CEPI (Confederation of European

Paper Industries), indicate that in Europe almost 7 million

tonnes of cardboard are consumed

(www.cepicartonboard.com/?section=some_market_statistics).

This material, used mostly in the packaging sector, can be reused many times (usually up to 6) and 54%

of it is comprised of recycled material (www.cepicartonboard.com/?section=cartonboard_production).

During this past August a two-shaft shredder was delivered in

Belgium. It is a hydraulic model K 13/50, equipped with special

hopper and hydraulic presser, which will be used as a primary

element of a shredding and compacting line of cardboard packaging, designed to process 1.5 t/h.

The K 50 HP series hydraulic shredders, used for the volumetric reduction of materials, allow the

processing of up to 3 t/h of waste and industrial products such as cardboard packaging, plastic and metal drums, cubitainers, plastic, electronic waste, pallets and food scraps, as well as SUW, ELT and RDF.

SatrindTech S.r.l. - Via Monfalcone, 122 - 20010 Arluno (MI) Italia www.satrindtech.com | [email protected] | +39 02 9037 6683 | +39 02 9037 6721

If you read this article online, please Click here

Mod. NEW1009 Rev. 0

With a shredding chamber measuring 1,250 mm in length and a

set of 50 mm blades with 1 beak, the K 13/50 shredder is then

completed with additional special items, designed by the

SatrindTech Technical Office upon the customer’s request: a hopper able to accommodate up to 5 m3 of material and an

arched hydraulic presser, whose function is to facilitate the

gripping action of the blades on the material during processing.

The hopper is equipped with an opening on the rear side with a swinging door to allow the entry of the presser in the hopper

when required by the operator.

The project, within which the SatrindTech shredder is the first

element of the line, provides that the material is loaded into the hopper using a forklift.

Once processed, the shredded material falls onto a conveyor

which distributes it to the compaction lines positioned in a

parallel way along the processing line.

The shredder, the presser, the loading and unloading transport belts, are handled by a single electrical panel, on which there is also a digital powerbank hydraulic control panel. Having to treat potentially inflammable material, in addition to the requirements of the EC norms, the shredder was supplied with a cable system in accordance with requirements of Belgian legislation in this area, which is in accordance with standard NBN C30-004 F2.

Our SatrindTech sales service is also available to provide any type of technical information and to propose solutions for the shredding of materials.

For any of your requests, please contact us at +39 02 9037 6683 or write to us by sending an email to

[email protected].

To download this article, please click here. Our Sales Dept. is your disposal for any information. SatrindTech Srl

Le informazioni trasmesse sono da intendere solo per la persona e/o ente a cui sono indirizzate, possono contenere documenti confidenziali e/o materiale riservato. Qualsiasi modifica, inoltro, diffusione o altro utilizzo, relativo alle informazioni trasmesse, da parte di persone e/o enti diversi dai destinatari indicati, è proibito ai sensi del D.Lgs 196/2003 (Testo unico sulla Privacy). Se Lei ha ricevuto questo articolo per errore, per favore contatti il mittente e cancelli queste informazioni da ogni computer. Transmitted information are only for the person and/or agency to which they are addressed; the information can contain confidential documents and/or classified material. Whichever modification, forward, spread or other use, relative to the transmitted information, by people and/or agencies not indicated in e-mail addresses, are forbidden in according to D.Lgs 196/2003 (Code for the protection of personal data - Privacy). If you have received this article for error, please contact the sender and delete these information from every computer.

SatrindTech S.r.l. - Via Monfalcone, 122 - 20010 Arluno (MI) Italia www.satrindtech.com | [email protected] | +39 02 9037 6683 | +39 02 9037 6721