Embed Size (px)
Citation preview
11
RDS Non-sulfur vulcanized Rubber Reviving AgentRDS-EPDM EPDM Reviving AgentRDS-CR CR Reviving AgentRDS-NBR NBR Reviving AgentRDS-CPE CPE Reviving Agent
Appearance: light yellow powder Application：RDS-EPDM、RDS-CR、RDS-NBR、RDS-CPE is respectively applicable to the revivingof EPDM, CR, NBR, CPE and non-sulfur vulcanized rubber.
Application Recipe:
Waste rubber
RDS
Total
100
2-5
102-105
100
2-5
102-105
Reviving Technique：1. Place the unqualified rubber products and production leftovers on the open mill after selecting, cleaning, removing sundries, drying and cutting into small pieces, break them with small roll pitch (≤0.2mm), and make them be powder after selection and classification.2. Refine the rubber powder and the RDS rubber reclaiming agent on the open mill for 15-30 min with roll temperature below 50℃. Corresponding softener can be added according to the condition, and after mill running and sheeting, the revived rubber can be got.Storage life: in cool and dry places for 2 yearsPackage: 25kg/bag
RDSiR Silicone Rubber Reclaiming Agent
waste silicone rubber
RDSiR
Total
Reclaiming Technique：1. Place the unqualified silicone rubber products and production leftovers on the open mill after selecting, cleaning, removing sundries, drying and cutting into small pieces, break them with small roll pitch (≤0.2mm), and make them be silicone rubber powder after selection and classification.2. Refine 20 meshes silicone rubber powder and RDSiR silicone rubber reclaiming agent on the open mill for 15-20 min with roll
Appearance: light yellow powder Application：applicable to the reviving of the waste silicone rubber under normal temperature. Application Recipe:
temperature below 50℃. Corresponding softener can be added according to the condition, and after mill running and sheeting, the reclaimed silicone rubber can be got.3. Notes: The reviving of silicone rubber is apt to mix on the open mill at low speed ratio; the higher the speed ratio the harder to sheet; it is recommended to operate on the open mill with the speed ratio of 1:1.1.Storage life: in cool and dry places for 2 yearsPackage: 25kg/bag
