Quick Patch and Quick Wrap presentation

Unique, easy to use, Unique, easy to use, UV or sunlight activated UV or sunlight activated

self adhesive repair patch self adhesive repair patch

Quick Patch UV TechnologyQuickPatches.co.ukQuickPatches.co.uk

UV curing repair patch – GRP Easy application – cut, peel and stick – finished Extremely durable in aggressive environments Flexible and waterproof Weather and UV resistent Can be drilled, tapped, sanded and painted Resistant against chemicals, solvents and oils Resistant against corrosion & abrasion Temperature resistant from -40°C to +200°C No shrinkage or expansion during the application Bonds to most surfaces Fast curing (5 minutes in sunny environment)

75mm x 150mm, 1.2mm thickness 150mm x 225mm, 1.2mm thickness 225mm x 300mm, 1.2mm thickness


In addition to the Quick Patch in your chosen size you will just need a pair of scissors or a suitable knife.


Use the scissors to cut open the protection foil around the

Quick Patch

Quick Patch UV Technology

Application

QuickPatches.co.ukQuickPatches.co.uk

Remove the backing foil on the sticky side prior to application onto your repair area.


Application


Clean surface area eliminate free of grease and loose particles. No Primer needed to prepare for bonding.

Cut the Quick Patch to the desired size with scissors or knife and prepare for fixing onto the repair area. Quick Patch on sticky side bonds perfectly to most materials.


Application


Start wrapping around burst or leaking pipe or onto repair area.


Application


Wrap completely around pipe to stop the leak, and leave to cure in the direct sunlight for at least 20-30 minutes.


Application


Pipes are ready for reuse after about 10-20 min. on a sunny day or 30-40 minutes in cloudy weather at more than 15°C independent of weather or humidity.


Application


The patch is also ideal for repair of boxes, tanks, metal plates etc.


Application


Just remove backing foil and cut to size with scissors if necessary.


Application


Stick Quick Patch with sticky side onto the repair area and leave for 20 - 30 minutes.


Application


It is safe and really easy to use by anyone


Application


Bitumen

Glazing

Tubes

Roofs

Banister

Covers

Pipe‘s

Metals

Concrete

Roof lights

Rain drain‘s

Wood

Fences

Glass & PVC

Window frames


Fields of application


There are many different application areas where Quick Patch can be used as an insulation protection system:

Chemical Industry Food Industry Off-Shore Petrochemical Industry Pharmaceutical Industry Tank Roofs Piping Underground Piping




INSULATION PROTECTION

waterproofing impact resistance




PIPES &CORROSION PROTECTION




PHARMACEUTICAL PLANTS




FOOD INDUSTRY




OFFSHORE INSULATION PROTECTION




CHEMICAL STORAGE TANK

PROTECTION




TANK ROOFS




UNDERGROUND PIPING




UNDERGROUND PIPING




CONCRETE PROTECTION




PIPE SUPPORT




INTERNAL REPAIR OF STORAGE TANKS




PIPE PRODUCTION




STEEL CORROSION










BEFORE AFTER




BEFORE

DURING AFTER




Pressure Resistance Testing

Quick Patch resists internal pressure held @ 2,100 PSI with no problems




Distributed in the UK and Ireland on behalf of:Bullseye Products LLC – USA

by

K & E Enterprises Ltd 68 Braniel Road

LisburnBT27 5JJ

Northern [email protected]

Thank you for your attention!
