Upload
mikron-mikroshot
View
960
Download
4
Embed Size (px)
DESCRIPTION
Mikron MikroShot: Affordable thermal imaging camera that fits in your pocket or on your belt loop to go anywhere
Citation preview
Mikron MikroSHOT™
What is the MikroSHOT?
• Compact radiometric thermal imager (160x120)• Lightweight at 10.5oz including batteries• Battery operated, 3 rechargeable NiMH batteries • User friendly, one-handed operation• Advanced user features, auto range and span• Saves IR images in radiometric JPEG format• Also saves visible images• Fixed, Movable, Min/Max cursors, ΔT • Easy manual focusing (focus-free beyond 1.3m)• Economic, affordable price• Fully exportable (8.5 Hz)• A-Si Detector - UFPA
Specifications
Basic Specifications Measuring Range -20 to 350ºC (-4 to 662ºF) Resolution 0.2 ºC/0.1 ºC with S/N improvement Infrared Detector Uncooled focal plan array Spectral Range 8 to 13µm Frame Rate 8.5 Frames/Sec Thermal Image Pixels 160(H) x 120(V) Field of View 28º(H) x 21º(V) I.F.O.V. 3.1 mrad
Focusing Range 10cm (3.94in.) to infinity. Temperature accuracy not assured at 50cm (19.7 in.) or closer.
Accuracy ±2 ºC or ±2%, whichever is greater
Non-Uniformity Correction Automatic upon start up. User adjustable interval.
Measuring Functions Point Values Center, max/min, movable (1 point). ΔT Emissivity Correction Table of emissivity values included Alarm On screen, high or low temperature Image Improvement Filtering and averaging Color Palette 3 types and monochrome
Image Visible Light Camera Approximately 0.7M pixels Monitor 2.7” LCD, 3 brightness settings
Environmental Specifications Operating Temperature -15 to 50ºC Protection IP43
Dimensions Approximately 100 x 65 x 45mm (3.9 x 2.6 x 1.8”)
Weight Approximately 300g (10.5 oz.) – weight includes batteries
Standard Accessories included with the MikroSHOT
• MikroSpec™ 4.0 image analysis & reporting software
• Operation manual on CD
• Soft case• Hand strap• USB cable for image
download to PC • Removable 1 GB SD
memory card (over 3000 images)
• (3) Rechargeable NiMH batteries
• Battery charger• AC adapter and power
cable• 1 year warranty
Not pictured: Software, CD, and AC Adapter & Power Cable
Optional Accessories
• SD card (2GB)• Video cable• Tripod• Additional rechargeable NiMH batteries• Extended battery pack• Scene illuminator• Laser pointer• Hard case• Level
Compact – Different from the Rest
• Compare the size of MikroSHOT to other imagers in the Mikron imaging product line
Key Features: Size & Design
• Size & Design
– With batteries, MikroSHOT weighs approximately 10.5 oz (300g) with batteries
– Easy to read buttons, easy to move mode dial
– Power on and off button
– Large 2.7” color LCD
image display
– Ergonomic design
Key Features: Front Design
Manual focus ring
On/Off Mounting Shoe
Lens
FRZ/REC Key
Mode Switch
Key Features: Back Design
Key Features: GUI
• User friendly• Automatic range & span (as pictured on bottom
left) • 6 menu options: SCALE, MEASURE, CAL, ALARM,
DATA, & SET UP (as pictured on bottom right)
6 menu options
Auto allows for automatic range & span
CT: The “Center” or “Up key
HT: Setting for max temp value or “right” key
Fn: Function or “down” key
LT: Setting the min temp or “left” key
Menu/Cancel: Displays menu or cancels set value
Key Features: GUI Menu Options - SCALE
SCALE• To access the SCALE,
select the SCALE button from the menu screen
• This feature allows you to access the Color Palette and choose a Temp Unit (°C or °F)
• Choose from the following palettes: rainbow, iris, brightness, & monochrome
Key Features: GUI Menu Options - MEASURE
MEASURE – select and click OK to reveal the following options (as pictured on the lower right corner)
– Center point
– Max/Min
– Delta Temp
– Adjust Visual Image
Key Features: GUI Menu Options - CAL
• CAL – This feature allows for the following options:
– Emissivity calculation: includes an emissivity table
– Ambient setting
– Filter
– Average
– Calibration
Key Features: GUI Menu Options - ALARM
• ALARM
– Displays on screen alarm if temperature goes above or below the preset value
– Isothermal colored alarm function for separating areas of high & low temperatures
Key Features: GUI Menu Options – How to set ALARM
ALARM• To enable alarm, select alarm on
the menu screen, and select alarm• Next, select alarm message, and
press HT button (right arrow button)
• Select ON and press OK• To set the event (the temperature
parameter), select event and press HT button
• Pressing HT or LT buttons makes a digit change and pressing CT or FN makes a number change. Press OK to determine the value
Key Features: GUI Menu Options – How to set COLOR ALARM
Color Alarm• To enable the color alarm,
select ALARM from the menu screen and press OK; then select COLOR ALARM
• Next, select COLOR ALARM and press HT button
• Press OK after selecting ON to enable color alarm
• To set the max/min value, select MAX VALUE or MIN VALUE and press HT button to change the value
• Pressing HT or LT buttons selects the digit; pressing CT or FN changes the value. Press OK to determine the value
Key Features: GUI Menu Options – Data
DATA• Select the DATA
button on the menu screen and click OK
• Allows you to save the visual image and thermal image simultaneously
• You can also delete the image
Key Features: GUI Menu Options – Set Up
SET UP – Key feature on the menu screen that allows for the following:
– Language
– All Clear
– Time & Date
– TV System
– LCD Bright
– Energy Saving
– Auto Saving Mode
– Auto Shutdown
– Save Configuration
– Startup Configuration
– Initialize
– Version
Key Features: Optical Design
• Simple, reliable optical design
• Manual focus• Focus free beyond 1.4
yards (1.3 m)• Thermal measuring of
small objects with a minimum focal length of 3.9 inches (10 cm)
Key Features: Image Modes
• Built-in visible camera• Linked storage of thermal & visible images• Dial for quick switching between modes • 3 cursors: Center fixed, movable, min/max, ΔT • Temperature data also displayed on visible
image
Key Features: Image Modes – Temperature on Visible
• To access the temperature on visible feature, turn the rotary dial and point the white arrow to the red cross in box symbol (as seen below)
• This allows for temperature measurement to be displayed on the visible image
Key Features: External Accessories
• Accepts external accessories via:
– Top mounted shoe
– Tripod mounting receiver
Top mounted shoeTripod adapter (on bottom of camera)
Examples of hot shoe accessories (not included)
Key Features: Data & Analysis
• IR & visible image data saved to SD card
– No special medium required for data storage• USB 2.0 for fast transfer of data to PC • IR images saved in radiometric JPEG format
– IR image opens for viewing with generic software
– Thermal analysis w/provided MikroSpec software
Industry Applications
• Industrial Physical Plant Maintenance• Residential, Retail & Commercial Building
Inspection• Agriculture• Veterinary• Law Enforcement & Firefighting• Dental • Theme Parks• Holistic Medicine• Automotive • Schools• Etc.
Thank you