Membrane systems

Engineered Membrane Solutions

Series: AT-Series AT-Series BT-Series BT-Series BT-Series CT-Series CT-Series

Feed Water Source: Municipal/Well Municipal/Well Municipal/Well Municipal/Well Municipal/Well Municipal/Well Municipal/Well

Production (GPD): 500 1000 1500 1800 2000 4000 5000

Membrane Size: HF1-2521 HF1-2521 HF1-2540 HF1-4040 HF1-2540 HF1-4040 HF1-4040

Membrane Quantity: 2 3 2 1 3 2 3

Vessel Array: 1:1 1:1:1 1:1 1 1:1:1 1:1 1:1:1

Motor HP: 1/3 1/2 3/4 3/4 3/4 1-1/2 1-1/2

Standard Voltage: 110V 110V 110V 110V 110V 220V 220V

Hertz: 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz

Phase: 1 PH 1 PH 1 PH 1 PH 1 PH 1 PH 1 PH

Standard Recovery: 26% 41% 41% 30% 63% 48% 53%

Concentrate Recycle: Optional Optional Optional Standard Optional Optional Optional

Feed Flush: Optional Optional Optional Optional Optional Optional Optional

Feed | Product | Waste: 1”, 3/8”, 3/8” 1”, 3/8”, 3/8” 1”, 3/8”, 3/8” 1”, 3/8”, 3/8” 1”, 3/8”, 3/8” 1”, 1”, 1” 1”, 1”, 1”

Unit Dimensions (in): 14” x 20” x 27” 14” x 20” x 27” 19” x 23” x 46” 19” x 23” x 46” 19” x 23” x 46” 30” x 38” x 47” 30” x 38” x 47”

Unit Weight (lb): 65 70 105 105 115 235 250

Model: AT-500 AT-1000 BT-1500 BT-1800 BT-2000 CT-4000 CT-5000

FLEXEON Reverse Osmosis (RO) Systems are designed and manufactured for commercial and light industrial applications. Thesesystems have been engineered for capacities ranging from 500 – 40,000 gallons per day and for municipal and well water supplies.FLEXEON RO Systems come pre-assembled, are fully tested, preserved and sanitized and only require simple utility connections onceon site. Systems come ready for immediate on-line service, minimal set up and with little adjustment. The simple, high quality and provendesign of FLEXEON RO Systems have made these systems become known as uncomplicated, cost effective and reliable waterpurification systems.

Reverse Osmosis Systems

Value Added

� Space saving design

� Integrated pre-filtration

� Lightweight and non-corrosive aluminum frame

� AXEON membranes

� AXEON membrane housings

� AXEON gauges and flowmeters

� Numerous options and upgrades to suit most water treatment applications†

� Pre-configured packages for ease of ordering and stocking††

� 5-star technical and customer supportbefore and after the sale

� Full documentation provided with every system manufactured

� Readily available replacement parts

� One-on-one applications engineering consultation

† Please consult individual product specification sheets for more information on available options and upgrades.

†† Standard, Advanced and Premeir packages are available for systems up to 20,000 GPD.

Series: CT-Series DT-Series DT-Series DT-Series GT-Series GT-Series

Feed Water Source: Municipal/Well Municipal/Well Municipal/Well Municipal/Well Municipal/Well Municipal/Well

Production (GPD): 7000 10000 15000 20000 30000 40000

Membrane Size: HF1-4040 HF1-4040 HF1-4040 HF1-4040 HF1-4040 HF1-4040

Membrane Quantity: 4 6 8 10 20 24

Vessel Array: 1:1:1:1 2:2:2 2:2:2:2 2:2:2:2:2 3:3:2:2 4:4:2:2

Motor HP: 1-1/2 3 3 5 5 7-1/2

Standard Voltage: 220V 220V 220V 220V 220V 220V

Hertz: 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz

Phase: 1 PH 1 PH 1 PH 3 PH 3 PH 3 PH

Standard Recovery: 62% 55% 55% 55% 65% 65%

Concentrate Recycle: Optional Optional Optional Optional Optional Optional

Feed Flush: Optional Standard Standard Standard Standard Standard

Feed | Product | Waste: 1”, 1”, 1” 2”, 1”, 1” 2”, 1”, 1” 2”, 1”, 1” 2”, 1.5”, 1.5” 2”, 1.5”, 1.5”

Unit Dimensions (in): 30” x 38” x 47” 49” x 33” x 54” 55” x 33” x 54” 61” x 33” x 54” 134” x 43” x 81” 134” x 43” x 81”

Unit Weight (lb): 265 350 400 450 1500 1650

Model: CT-7000 DT-10000 DT-15000 DT-20000 GT-30000 GT-40000

GT-40000Reverse Osmosis System

System Benefits and Highlights

Pre-configured Options to Fit Most ApplicationsFLEXEON Reverse Osmosis Systems come standard with a wide range of features. There are numerous options and upgradesavailable to fit the requirements of a diverse range of water treatment applications. Listed below is a selection of descriptions for ourmost popular options and upgrades.

AXEON HF4 Extra Low Energy Membranes 100 psi nominal operating pressure for increased system efficiency and energysavings while offering a 98.5% salt rejection.

AXEON HF5 Ultra Low Energy Membranes The first proprietary ultra low energy membrane in the industry, the HF5 offerssuperior energy savings with an ultra low operating pressure of 80 psi.

AXEON NF3 Nanofiltration Membranes 70 psi nominal operating pressure with a 40 – 50% salt rejection.

AXEON NF4 Nanofiltration Membranes 70 psi nominal operating pressure with a 80 – 90% salt rejection.

Stainless Steel Membrane Housings 304 Stainless Steel design that withstands various climate conditions andindustrial use.

Fiberglass Membrane Housings FRP construction which demonstrates higher resistance to varying feed waterconditions and chemicals.

Concentrate Recycle Allows for increased RO system efficiency by recycling back waste water intothe feed stream and increasing the system recovery.

Blending Valve Allows for a mixture of feed water into the final reverse osmosis product waterto achieve a fine-tuned product TDS.

Dual TDS Controller Allows for simultaneous monitoring of both the feed TDS and product TDS levels,helping to monitor the RO system salt rejection and membrane performance.

TDS/Conductivity Meter Allows for the monitoring of the reverse osmosis product water TDS andconductivity levels; useful in evaluating overall system performance.

Stainless Steel Booster Pump Offers a longer product lifespan and increased resistance to high TDS feedwater and corrosive materials, such as dosing chemicals and antiscalants.

S150 Computer Controller Allows for pre-treat lockout functionality, tank level input, TDS monitoring, feedflush, and features a convenient LCD display and alarm function.

Minitrol IF Computer Controller Allows for pre-treat lockout functionality, tank level input, and features aconvenient LED status display indicator for increased ease of use.

Permeate Sample Ports Allows for evaluation of individual membrane performance in an RO system andaids in system troubleshooting and maintenance.

Chemical Pump Outlet Provides an integrated power source with the RO system for connection of achemical feed pump.

High Pressure Tank Switch Automatically turns off the RO system at a pre-determined storage tank pressure.

P: 800-320-4074 • W: www.axeonwater.comF: 800-609-0829 • E: [email protected] County Center Drive, Suite 100, Temecula, CA 92591

MKTF-117 FLEXEON is a registered trademark of AXEON Water Technologies. 02/12 ©2012 AXEON Water Technologies


FLEXEON 5 Stage TFReverse Osmosis System

FLEXEON Residential Reverse Osmosis Systems combine advanced reverse osmosis and carbon filtration technologies to

produce the best quality water available for point-of-use applications.

� Thin Film (TF) Composite Membrane

� High Quality Pre and Post Filters

� 3.2 Gallon Storage Tank

� Faucet, Wrench and Tubing Included

� Available with Optional Booster

Pump, Permeate Pump or UV

� Quick Connect Fittings

� 100% Tested in the USA

� 100% Assembled in the USA

Residential Reverse Osmosis Systems


� Thin Film Composite Membrane

� 5 Micron Sediment Filter

� Carbon Block

� Inline Post Carbon

� Long Reach Non-Air Gap Faucet

� 3.2 Gallon White Storage Tank

� All Necessary Components For Quick & Easy Installation


� 100% Tested & Assembled In The U.S.A.

� 1-Year Limited Warranty

Part Number Description201539 SYSTEM, RO, TF, 4 STAGE, 25 GPD, FLEXEON

201540 SYSTEM, RO, TF, 4 STAGE, 35 GPD, FLEXEON





Part Number Description200005 SYSTEM, RO, TF, 5 STAGE, 25 GPD, FLEXEON






4 Stage TF Reverse Osmosis Systems



� Carbon Block

� GAC Cartridge








5 Stage TF Reverse Osmosis Systems

Tech Note: The permeate pump uses the concentrate water by pulling a vacuum on the permeatewater, thus preventing “TDS creep” as the tank is filling and also keeps the system ata constant recovery ratio.

Part Number Description200012 SYSTEM, RO, TF, 4 STAGE, 25 GPD, PERMEATE PUMP, FLEXEON

200013 SYSTEM, RO, TF, 4 STAGE, 35 GPD, PERMEATE PUMP, FLEXEON




Tech Note: The booster pump boosts the operating pressure to an average of 60 psi and allowsfor improved performance of the system when there is low feed water pressure, lowproduction or high feed water TDS.

Part Number Description200018 SYSTEM, RO, TF, 5 STAGE, 25 GPD, 6800 PUMP, FLEXEON

200019 SYSTEM, RO, TF, 5 STAGE, 35 GPD, 6800 PUMP, FLEXEON





202253 SYSTEM, RO, UPGRADE, 6800 PUMP, 220V 50/60HZ

202254 SYSTEM, RO, UPGRADE, 8800 PUMP, 220V 50/60HZ



� Carbon Block

� GAC Cartridge


� Aquatec Booster Pump




� Standard 110V 60HZ




5 Stage TF Reverse Osmosis Systems with Booster Pump



� Carbon Block


� Aquatec Permeate Pump







4 Stage TF Reverse Osmosis Systems with Permeate Pump

MKTF-115 AXEON is a registered trademark of AXEON Water Technologies. 02/12 ©2012 AXEON Water Technologies


All Weights and Dimensions are Approximate

Part Number Description202442 SYSTEM, RO, TF, 6 STAGE, 25 GPD, 1 GPM UV, FLEXEON

202443 SYSTEM, RO, TF, 6 STAGE, 35 GPD, 1 GPM UV, FLEXEON





202542 SYSTEM, RO, UPGRADE, 1 GPM UV, 220V 50/60HZ

General Operating SpecificationsNominal Salt Rejection: 98%

Operating Pressure psi (bar): 40 – 80 (2.75 – 5.51)

Operating Temperature °F (°C): 40 – 90 (4.44 – 32.22)

Water Hardness gpg: <7

Maximum Turbidity NTU: <1

pH Range: 4 – 11

TDS ppm: <1000

A Pressure Regulator is to be Installed Prior to the System.

System Specifications

Daily Production Rates gpd (lpd): 25 (94.64), 35 (132.5)50 (189.3), 75 (283.9), 100 (378.5), 150 (567.8)

Tank Capacity: 4 Gallons (3.2 Net)

Tank Dimensions inch (cm): 11 x 14 (27.9 x 35.6) (W x H)

Recovery Rate Ratio: 1:4 (Product to Waste)

System Weight lb. (kg): 25 (11.34)

System Dimensions inch (cm): 7 x 16 x 17 (17.7 x 40.6 x 43.1) (L x W x H)

Shipping Box Dimensions inch (cm): 18 x 19 x 20 (45.7 x 48.2 x 50.8) (L x W x H)

Tech Note: The ultraviolet light neutralizes any bacteria or viruses with its UV rays. This option is recommended for feed waters such as well water which may contain microbio-logical contaminants.



� Carbon Block

� GAC Cartridge


� Ultraviolet Light



� All Necessary Components For Quick &Easy Installation

� Standard 110V 60Hz




6 Stage TF Reverse Osmosis Systems with Ultraviolet Light

Reverse Osmosis Systems General Specifications


LT-Series Reverse Osmosis Systems

Food Processing Food & Ice Preparation Misting Spot-Free RinsePharmaceutical

Aquaculture Beverage Production Bottled Water Drinking WaterElectronics

Applications and Markets

LT-200Reverse Osmosis System

Front

LT-Series Reverse Osmosis Systems feature high quality

components and a compact wall mount space saving

design that allows for many options

and upgrades to suit most applications.

LT-Series Reverse Osmosis Systems have been engineered

for capacities ranging from 200 – 300 gallons per day.

Benefits� Fully Equipped and Customizable� Compact Space Saving Design� Pre-Plumbed, Wired and Assembled� Factory Tested and Preserved� Low Operation and Maintenance Costs� Easy Maintenance and Servicing� 1-Year Limited Warranty� Made in the U.S.A.

LT-Series Reverse Osmosis SystemsStandard Features� White Powder Coated Steel Bracket

� 5 Micron Sediment Pre-Filter

� 10 Micron Carbon Block Pre-Filter

� Granulated Activated Carbon (GAC) Post-Filter

� Double O-Ring Filter Housings

� AXEON HF4 Extra Low Energy Membrane

� AXEON PVC Membrane Housing

� Aquatec® High Flow Booster Pump

� Aquatec Tank Pressure Switch

� Aquatec Feed Solenoid Valve

� Aquatec Auto Flush Timer Valve

� 0-160 psi Pump Pressure Gauge

� John Guest® Push/Pull Fittings with Locking Safety Clips

LT-300Reverse Osmosis System

Options and Upgrades� AXEON NF3 Nanofiltration Membrane

� AXEON NF4 Nanofiltration Membrane

� Stainless Steel Membrane Housing

� HM Digital™ DM-2 Dual TDS Meter

� HM Digital QC-1 Conductivity Meter

� 10” Post DI Cartridge

� 10” Post Calcite Cartridge

� 20” Post DI Cartridge

� 20” Post Calcite Cartridge

� 20” Double O-Ring Filter Housings

� 10” White Powder Coated Steel Frame with Bulkhead Fittings

� 20” White Powder Coated Steel Frame with Bulkhead Fittings

Front

Back

SYMBOL LEGEND

CKV

(OPTIONAL)

PRODUCT

FROM PUMP

(OPTIONAL)

WATER INLET TO VESSEL

DRAIN

TANKSWITCH

FLOW RESTRICTORAUTO FLUSH VALVE

5 MICRONSEDIMENT

10 MICRONCARBON

RO PUMP(X2 FOR 300)

PI0–160

PI0–160

PI0–160

2521 MEMBRANES

CARBONOPTIONAL:

(DI CARTRIDGE)(CALCITE CARTRIDGE)

PRESSURE INDICATOR

LOW PRESSURE SWITCH

SOLENOID

FLOW METER

CHECK VALVE

HIGH PRESSURE SWITCH

NEEDLE VALVE

TDS METER

SYMBOL LEGEND

CKV

(OPTIONAL)

PRODUCT

FROM PUMP

(OPTIONAL)

WATER INLET TO VESSEL

DRAIN

TANKSWITCH

FLOW RESTRICTORAUTO FLUSH VALVE

5 MICRONSEDIMENT

10 MICRONCARBON

RO PUMP

PI0–160

PI0–160

PI0–160

2514 MEMBRANES

CARBONOPTIONAL:

(DI CARTRIDGE)(CALCITE CARTRIDGE)

PRESSURE INDICATOR

LOW PRESSURE SWITCH

SOLENOID

FLOW METER

CHECK VALVE

HIGH PRESSURE SWITCH

NEEDLE VALVE

TDS METER

LT-200

LT-300



* Product Flow rates and recovery are based on equipment test parameters.** Does not include operating space requirements.

*** Treatment ability of the RO system is dependent on feed water quality. Performance projections must be run for each installation.

Operating Limits

Specifications

Maximum Feed Temperature °F (°C) 85 (29.00) Maximum Free Chlorine ppm 0Minimum Feed Temperature °F (°C) 40 (4.44) Maximum TDS ppm 1000Maximum Ambient Temperature °F (°C) 120 (48.89) Maximum Hardness gpg†† 0Minimum Ambient Temperature °F (°C) 40 (4.44) Maximum pH (Continuous) 11Maximum Feed Pressure psi (bar) 85 (5.86) Minimum pH (Continuous) 5Minimum Feed Pressure psi (bar) 45 (3.10) Maximum pH (Cleaning 30 Min.) 12Maximum Operating Pressure psi (bar) 120 (8.27) Minimum pH (Cleaning 30 Min.) 2Maximum SDI Rating SDI <3Maximum Turbidity NTU 1

Test Parameters: 550 TDS Filtered (5 Micron), De-Chlorinated, Municipal Feed Water, 65 psi (4.50 bar) Feed Pressure, 100 psi (6.89 bar) Operating Pressure, 77 Degrees F (25 Degrees C), Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.

† Low temperatures and high feed water TDS levels will significantly affect systems production capabilities. Computer projections should be run for individual applications which do not meet or exceed minimum and maximum operating limits.

†† Scale prevention measures must be taken to prolong membrane life.

Models LT-200 LT-300DesignConfiguration Single Pass Single PassFeed Water Source*** TDS <1000 ppm TDS <1000 ppmStandard Recovery Rate† 47% 40%Rejection and Flow RatesNominal Salt Rejection % 98.5 98.5Permeate Flow* gpm (lpm) 0.14 (0.53) 0.21 (0.79)Minimum Feed Flow gpm (lpm) 0.50 (1.89) 0.50 (1.89)Maximum Feed Flow gpm (lpm) 1.00 (3.79) 1.00 (3.79)Minimum Concentrate Flow gpm (lpm) 0.30 (1.14) 0.30 (1.14)ConnectionsFeed inch 1/4 Tube 3/8 TubePermeate inch 1/4 Tube 3/8 TubeConcentrate inch 1/4 Tube 1/4 TubeMembranesMembrane(s) Per Vessel 1 1Membrane Quantity 1 1Membrane Size 2514 2521VesselsVessel Array 1 1Vessel Quantity 1 1PumpsPump Type Booster Pump 8800 Booster Pump 8800Motor HP (kw) N/A N/AElectricalStandard Voltage 110V, 60Hz, 1 PH, 2.0A 110V, 60Hz, 1 PH, 4.0A

Voltage Options 220V, 50Hz, 1 PH, 1.0A220V, 60Hz, 1 PH, 1.0A

220V, 50Hz, 1 PH, 2.0A220V, 60Hz, 1 PH, 2.0A

Systems Dimensions **L x W x H inch (cm) 7 x 17 x 32 (18 x 43 x 81) 7 x 25 x 32 (18 x 64 x 81)Weight lb. (kg) 42 (19.1) 50 (22.7)

LT-Series Reverse Osmosis Systems


AT-1000Reverse Osmosis System

Front

AT-Series Reverse Osmosis Systems are designed for

overall high performance, high recovery rates, minimal

energy consumption and offer great savings with

low maintenance and operation costs.

AT-Series Reverse Osmosis Systems feature a space

saving expandable design, exceptional pre-filtration,

quality components and allow for many options and

upgrades to suit most applications.

AT-Series Reverse Osmosis Systems have been

engineered for capacities ranging from

500 – 1000 gallons per day.

� Fully Equipped and Customizable

� Expandable and Lightweight Design

� Compact Space Saving Design

� Components Easily Accessible

Benefits

AT-Series Reverse Osmosis Systems

� Pre-Plumbed, Wired and Assembled

� Factory Tested and Preserved

� Low Operation Costs

� Low Maintenance Costs

� Easy Maintenance and Servicing

� CE Compliant


� Made in the U.S.A.


Options and Upgrades� AXEON HF4 Extra Low Energy Membranes

� AXEON NF3 Nanofiltration Membranes


� Stainless Steel Membrane Housings

� Concentrate Recycle Valve with Flow Meter

� HM Digital™ PS-100 TDS Controller

� HM Digital™ PS-200 Dual TDS Controller

� HM Digital™ PSC-150 TDS/Conductivity Controller

� Fluid-O-Tech™ Stainless Steel Rotary Vane Pump

� Minitrol Computer Controller

� Minitrol IF Computer Controller with Feed Flush

� S150 Computer Controller with Feed Flush

� High Pressure Tank Switch

� Chemical Pump Outlet

� Blending Valve

� Permeate Flush with Pressure Tank

� Permeate Flush with Atmospheric Tank

� Permeate Flush with Mechanical Float

� Permeate Sample Ports

� Single Wood Crate

Standard Features� Manual On and Off Control Switch

� White Powder Coated Aluminum Frame




� Fluid-O-Tech™ Brass Rotary Vane High Pressure Pump

� ODP High Efficiency Carbonator Motor

� AXEON HF1 Low Energy Membranes

� AXEON PVC Membrane Housings

� Permeate Flow Meter

� Concentrate Flow Meter

� Feed Low Pressure Switch

� Feed Solenoid Valve with Manual Bypass

� 316 Stainless Steel Concentrate Valve


� 0-100 psi Pre-Filter Pressure Gauges


AT-1000Reverse Osmosis System

Front

Back

Models AT-500 / AT-1000 STANDARD (S) ADVANCED (A) PREMIER (P)

FrameWhite Powder Coated Aluminum Frame ��

ControlsManual On and Off Control Switch ��

Minitrol Computer Controller �

Minitrol IF Computer Controller ��

Pre-Treatment Lockout ��

Tank Level Input ��

LED Controller Display ��

Feed Solenoid Valve with Manual Bypass ��

Concentrate Recycle Valve ��

Feed Low Pressure Switch 15-30 psi ��

InstrumentationPermeate Flow Meter ��

Concentrate Flow Meter ��

Concentrate Recycle Flow Meter � ��

316 Stainless Steel Concentrate Valve ��

0-100 psi Pre-Filter In Pressure Gauge ��

0-100 psi Pre-Filter Out Pressure Gauge ��

0-300 psi Pump Pressure Gauge ��

HM Digital™ PS-100 Permeate TDS Controller �

HM Digital™ PS-202 Dual Permeate and Feed TDS Controller �

FeaturesFeed Flush ��

5 Micron Sediment Pre-Filter ��

10 Micron Carbon Block Pre-Filter ��

Double O-Ring Filter Housings ��

AXEON HF1 Low Energy RO Membranes ��

AXEON HF4 Extra Low Energy RO Membranes ��

AXEON PVC Membrane Housings ��

Fluid-O-Tech™ Brass Rotary Vane Pump ��

Fluid-O-Tech™ Stainless Steel Rotary Vane Pump ��

ODP Carbonator Motor ��

Note: All 50Hz systems come standard with AXEON HF4 Extra Low Energy RO Membranes.

� A = Frame Style� T = Feed Water Type - Tap Water (T), Brackish Water (B), Sea Water (S)� XXXX = Rated Production in Gallons Per Day Based on Standard Test Conditions� S, A, P = System Package Identifiers

Naming Matrix

Reverse Osmosis System Packages

FLEXEON AT-Series Standard (S) Advanced (A) Premier (P)FLEXEON AT-500 AT-500S AT-500A AT-500PFLEXEON AT-1000 AT-1000S AT-1000A AT-1000P



Maximum Feed Temperature °F (°C) 85 (29.00) Maximum Free Chlorine ppm 0Minimum Feed Temperature °F (°C) 40 (4.44) Maximum TDS ppm <2000Maximum Ambient Temperature °F (°C) 120 (48.89) Maximum Hardness gpg†† 0Minimum Ambient Temperature °F (°C) 40 (4.44) Maximum pH (Continuous) 11Maximum Feed Pressure psi (bar) 85 (5.86) Minimum pH (Continuous) 5Minimum Feed Pressure psi (bar) 45 (3.10) Maximum pH (Cleaning 30 Min.) 12Maximum Operating Pressure psi (bar) 150 (10.34) Minimum pH (Cleaning 30 Min.) 2Maximum SDI Rating SDI <3Maximum Turbidity NTU 1

Operating Limits


† Low temperatures and high feed water TDS levels will significantly affect systems production capabilities. Computer projections should be run for individual applications.


Models AT-500 AT-1000DesignConfiguration Single Pass Single PassFeed Water Source *** TDS <2000 ppm TDS <2000 ppmStandard Recovery Rate† 26% 41%Recovery with Concentrate Recycle Up to 75% Up to 75%Rejection and Flow RatesNominal Salt Rejection % 98.5 98.5Permeate Flow* gpm (lpm) 0.35 (1.32) 0.69 (2.61)Minimum Feed Flow gpm (lpm) 1.35 (5.11) 1.69 (6.40)Maximum Feed Flow gpm (lpm) 3.00 (11.36) 4.00 (15.14)Minimum Concentrate Flow gpm (lpm) 1.00 (3.78) 1.00 (3.78)ConnectionsFeed inch 1 FNPT 1 FNPTPermeate inch 3/8 Tube 3/8 TubeConcentrate inch 3/8 Tube 3/8 TubeMembranesMembrane(s) Per Vessel 1 1Membrane Quantity 2 3Membrane Size 2521 2521VesselsVessel Array 1:1 1:1:1Vessel Quantity 2 3Pumps

Pump Type Rotary Vane401 Brass or 411 SS

Rotary Vane601 Brass or 611 SS

Motor HP 1/3 1/2RPM @ 60 (50 Hz) 1725 (1465) 1725 (1465)ElectricalStandard Voltage 110V, 60Hz, 1 PH, 6.6A 110V, 60Hz, 1 PH, 8.2A

Voltage Options 220V, 60Hz, 1 PH, 3.2A220V, 50Hz, 1 PH, 3.7A

220V, 60Hz, 1 PH, 3.9A220V, 50Hz, 1 PH, 4.1A

Systems Dimensions **L x W x H inch (cm) 14 x 20 x 27 (36 x 51 x 69) 14 x 20 x 27 (36 x 51 x 69)Weight lb. (kg) 65 (29.5) 70 (31.75)



Specifications



BT-2000Reverse Osmosis System

Front

BT-Series Reverse Osmosis Systems are designed for


energy consumption and offer great savings with low

maintenance and operation costs.

BT-Series Reverse Osmosis Systems feature a space


quality components and allow for many options and

upgrades to suit most applications.

BT-Series Reverse Osmosis Systems have been







BT-Series Reverse Osmosis Systems






� CE Compliant



Benefits


BT-2000Reverse Osmosis System

Standard Features� Manual On and Off Control Switch





� Fluid-O-Tech™ Brass Rotary Vane High Pressure Pump

� ODP High Efficiency Carbonator Motor


















� HM Digital™ PSC-150 TDS/Conductivity Controller

� Fluid-O-Tech™ Stainless Steel Rotary Vane Pump

� Minitrol Computer Controller

� Minitrol IF Computer Controller with Feed Flush




� Blending Valve

� Permeate Flush with Pressure Tank

� Permeate Flush with Atmospheric Tank

� Permeate Flush with Mechanical Float



Front

Back


� B = Frame Style� T = Feed Water Type - Tap Water (T), Brackish Water (B), Sea Water (S)� XXXX = Rated Production in Gallons Per Day Based on Standard Test Conditions� S, A, P = System Package Identifiers

Naming Matrix

FLEXEON BT-Series Standard (S) Advanced (A) Premier (P)FLEXEON BT-1500 BT-1500S BT-1500A BT-1500PFLEXEON BT-1800 BT-1800S BT-1800A BT-1800PFLEXEON BT-2000 BT-2000S BT-2000A BT-2000P

Models BT-1500 / BT-1800 / BT-2000 STANDARD (S) ADVANCED (A) PREMIER (P)


ControlsManual On/Off Control Switch ��

Minitrol Computer Controller �

Minitrol IF Computer Controller ��














HM Digital™ PS-100 Permeate TDS Controller �

HM Digital™ PS-202 Dual Permeate & Feed TDS Controller �



10 Micron Carbon Block Pre-Filter ��



AXEON HF4 Extra Low Energy RO Membranes ��


Fluid-O-Tech™ Brass Rotary Vane Pump ��

Fluid-O-Tech™ Stainless Steel Rotary Vane Pump ��

ODP Carbonator Motor ��

Note 1: All 50Hz systems come standard with AXEON HF4 Extra Low Energy RO Membranes.

Note 2: BT-1800 RO Systems come standard with the Concentrate Recycle Valve and Flow Meter options in order to achieve a higher recovery rate.



Operating Limits

Specifications






Models BT-1500 BT-1800 BT-2000DesignConfiguration Single Pass Single Pass Single PassFeed Water Source*** TDS <2000 ppm TDS <2000 ppm TDS <2000 ppmStandard Recovery Rate† 41% 30% 63%Recovery with Concentrate Recycle Up to 75% Up to 75% Up to 75%Rejection and Flow RatesNominal Salt Rejection % 98.5 98.5 98.5Permeate Flow* gpm (lpm) 1.04 (3.93) 1.25 (4.73) 1.38 (5.22)Minimum Feed Flow gpm (lpm) 2.04 (7.72) 4.25 (16.10) 2.35 (8.89)Maximum Feed Flow gpm (lpm) 6.00 (22.70) 14.00 (53.00) 6.00 (22.70)Minimum Concentrate Flow gpm (lpm) 1.00 (3.78) 3.00 (11.36) 1.00 (3.78)ConnectionsFeed inch 1 FNPT 1 FNPT 1 FNPTPermeate inch 3/8 Tube 3/8 Tube 3/8 TubeConcentrate inch 3/8 Tube 3/8 Tube 3/8 TubeMembranesMembrane(s) Per Vessel 1 1 1Membrane Quantity 2 1 3Membrane Size 2540 4040 2540VesselsVessel Array 1:1 1 1:1:1Vessel Quantity 2 1 3Pumps

Pump Type Rotary Vane601 Brass or 611 SS



Motor HP 3/4 3/4 3/4RPM @ 60 (50 Hz) 1725 (1465) 1725 (1465) 1725 (1465)ElectricalStandard Voltage 110V, 60Hz, 1 PH, 11.0A 110V, 60Hz, 1 PH, 11.0A 110V, 60Hz, 1 PH, 11.0A

Voltage Options 220V, 60Hz, 1 PH, 5.6A220V, 50Hz, 1 PH, 5.6 A

220V, 60Hz, 1 PH, 5.6A220V, 50Hz, 1 PH, 6.6A

220V, 60Hz, 1 PH, 5.6A220V, 50Hz, 1 PH, 6.6A

Systems Dimensions **L x W x H inch (cm) 19 x 23 x 46 (48 x 58 x 116) 19 x 23 x 46 (48 x 58 x 116) 19 x 23 x 46 (48 x 58 x 116)Weight lb. (kg) 105 (47.63) 105 (47.63) 115 (52.16)




CT-7000Reverse Osmosis System

Front

CT-Series Reverse Osmosis Systems are designed

for overall high performance, high recovery rates,

minimal energy consumption and offer great savings

with low maintenance and operation costs.

CT-Series Reverse Osmosis Systems feature a space


quality components and allow for many options

and upgrades to suit most applications.

CT-Series Reverse Osmosis Systems have been







CT-Series Reverse Osmosis Systems






� CE Compliant †



Benefits

CT-Series Reverse Osmosis SystemsStandard Features� Minitrol Computer Controller

� Multi Color LED Indicator Status Light� Pre-Treatment Lockout� Tank Level Input� Low Pressure Monitoring and Alarm






� Goulds® Multi-Stage Booster Pump









� 0-300 psi Pump Pressure Gauges




� AXEON HF5 Ultra Low Energy Membranes




� Fiberglass Membrane Housings



� HM Digital PSC-150 TDS/Conductivity Controller

� Goulds® Multi-Stage Stainless Steel Booster Pump

� Mintrol IF Computer Controller with Feed Flush


� S150 Computer Controller Expander Board

� S150 Computer Controller with Dual TDS

� Pump Pressure Relief Valve†



� Blending Valve



� Double Wood Crate

CT-7000Reverse Osmosis System

Front

Back

Reverse Osmosis System PackagesModels CT-4000 / CT-5000 / CT-7000

STANDARD (S) ADVANCED (A) PREMIER (P)FrameWhite Powder Coated Aluminum Frame ��

ControlsMinitrol Computer Controller ��

Minitrol IF Computer Controller �

S150 Computer Controller ��




LCD Controller Display ��











0-300 psi Final Concentrate Pressure Gauge ��

HM Digital™ PS-100 Permeate TDS Controller ��

Controller Permeate TDS Monitoring �

Controller Feed TDS Monitoring �



10 Micron Carbon Pre-Filter ��




AXEON HF4 Extra Low Energy RO Membranes � ��

AXEON PVC Pressure Vessels ��

Goulds® Multi-Stage Booster Pump ��

Goulds® Multi-Stage Stainless Steel Booster Pump ��

Permeate Sample Valves ��


� C = Frame Style� T = Feed Water Type - Tap Water (T), Brackish Water (B), Sea Water (S)� XXXX = Rated Production in Gallons Per Day Based on Standard Test Conditions� S, A, P = System Package Identifiers

Naming Matrix

FLEXEON CT-Series Standard (S) Advanced (A) Premier (P)FLEXEON CT-4000 CT-4000S CT-4000A CT-4000PFLEXEON CT-5000 CT-5000S CT-5000A CT-5000PFLEXEON CT-7000 CT-7000S CT-7000A CT-7000P



Operating Limits

Specifications

CT-Series Reverse Osmosis Systems





Models CT - 4000 CT - 5000 CT - 7000DesignConfiguration Single Pass Single Pass Single PassFeed Water Source*** TDS <2000 ppm TDS <2000 ppm TDS <2000 ppmStandard Recovery Rate† 48% 53% 62%Recovery with Concentrate Recycle Up to 75% Up to 75% Up to 75%Rejection and Flow RatesNominal Salt Rejection % 98.5 98.5 98.5Permeate Flow* gpm (lpm) 2.78 (10.52) 3.47 (13.14) 4.86 (18.40)Minimum Feed Flow gpm (lpm) 5.78 (21.00) 6.47 (24.50) 7.86 (29.80)Maximum Feed Flow gpm (lpm) 14.00 (53.00) 14.00 (53.00) 14.00 (53.00)Minimum Concentrate Flow gpm (lpm) 3.00 (11.36) 3.00 (11.36) 3.00 (11.36)ConnectionsFeed inch 1 FNPT 1 FNPT 1 FNPTPermeate inch 1 FNPT 1 FNPT 1 FNPTConcentrate inch 1 FNPT 1 FNPT 1 FNPTMembranesMembrane(s) Per Vessel 1 1 1Membrane Quantity 2 3 4Membrane Size 4040 4040 4040VesselsVessel Array 1:1 1:1:1 1:1:1:1Vessel Quantity 2 3 4PumpsPump Type Multi-Stage Multi-Stage Multi-StageMotor HP 1.5 1.5 1.5RPM @ 60 (50 Hz) 3450 (2900) 3450 (2900) 3450 (2900)ElectricalStandard Voltage 220V, 60HZ, 1PH, 8.3A 220V, 60HZ, 1PH, 8.3A 220V, 60HZ, 1PH, 8.3A

Voltage Options

220V, 50HZ, 1PH, 8.9A220V, 60HZ, 3PH, 5.1A220V, 50HZ, 3PH, 6.1A380V, 50HZ, 3PH, 4.5A460V, 60HZ, 3PH, 3.5A



Systems Dimensions **L x W x H inch (cm) 30 x 38 x 47 (76 x 96 x 119) 30 x 38 x 47 (76 x 96 x 119) 30 x 38 x 47 (76 x 96 x 119)Weight lb. (kg) 235 (106.6) 250 (113.4) 265 (120.2)




DT-20000Reverse Osmosis System

Front

DT-Series Reverse Osmosis Systems are designed for


energy consumption and offer great savings

with low maintenance and operation costs.

DT-Series Reverse Osmosis Systems feature

a space saving expandable design,

exceptional pre-filtration, quality components

and allow for many options and upgrades

to suit most applications.

DT-Series Reverse Osmosis Systems have

been engineered for capacities ranging

from 10000 – 20000 gallons per day.





DT-Series Reverse Osmosis Systems









Benefits

DT-Series Reverse Osmosis SystemsStandard Features� S150 Computer Controller � LCD Backlit Display � Pre-Treatment Lockout � Tank Level Input � Low Pressure Monitoring and Alarm � Controller Permeate TDS Monitoring � Feed Flush


� FSI® 10 Micron Filter Bag

� FSI® Bag Filter Housing


� Double O-Ring Filter Housing

� Goulds® Multi-Stage Booster Pump


















� Hanna® BL 981411pH Controller

� Hanna® BL 982411 ORP Controller

DT-20000Reverse Osmosis System


� S150 Computer Controller Expander Board

� S150 Computer Controller Feed TDS Monitoring




� Blending Valve


� Double Wood Crate

Front

Back


Naming Matrix

Models DT-10000 / DT-15000 / DT-20000 STANDARD (S) ADVANCED (A) PREMIER (P)


ControlsS150 Computer Controller � � ��

LCD Controller Display � � ��













0-300 psi Final Concentrate Pressure Gauge ��

Controller Permeate TDS Monitoring ��

Controller Feed TDS Monitoring �


FSI® 10 Micron Filter Bag ��


Double O-Ring Filter Housing ��


AXEON HF4 Extra Low Energy RO Membranes � ��


Goulds® Multi-Stage Booster Pump ��

Goulds® Multi-Stage Stainless Steel Booster Pump ��

Chemical Pump Outlet � �

Permeate Sample Valves ��


� D = Frame Style� T = Feed Water Type - Tap Water (T), Brackish Water (B), Sea Water (S)� XXXX = Rated Production in Gallons Per Day Based on Standard Test Conditions� S, A, P = System Package Identifiers

FLEXEON DT-Series Standard (S) Advanced (A) Premier (P)FLEXEON DT-10000 DT-10000S DT-10000A DT-10000PFLEXEON DT-15000 DT-15000S DT-15000A DT-15000PFLEXEON DT-20000 DT-20000S DT-20000A DT-20000P



Operating Limits

Specifications

DT-Series Reverse Osmosis Systems







Models DT - 10000 DT - 15000 DT - 20000DesignConfiguration Single Pass Single Pass Single PassFeed Water Source*** TDS <2000 ppm TDS <2000 ppm TDS <2000 ppmStandard Recovery Rate† 55% 55% 55%Recovery with Optional Concentrate Recycle Up to 75% Up to 75% Up to 75%Rejection and Flow RatesNominal Salt Rejection % 98.5 98.5 98.5Permeate Flow* gpm (lpm) 6.94 (26.27) 10.42 (39.44) 13.89 (52.57)Minimum Feed Flow gpm (lpm) 12.94 (49.00) 16.42 (62.1) 19.89 (75.30)Maximum Feed Flow gpm (lpm) 28.00 (106.00) 28.00 (106.00) 28.00 (106.00)Minimum Concentrate Flow gpm (lpm) 6.00 (22.71) 6.00 (22.71) 6.00 (22.71)ConnectionsFeed inch 2 FNPT 2 FNPT 2 FNPTPermeate inch 1 FNPT 1 FNPT 1 FNPTConcentrate inch 1 FNPT 1 FNPT 1 FNPTMembranesMembrane(s) Per Vessel 1 1 1Membrane Quantity 6 8 10Membrane Size 4040 4040 4040VesselsVessel Array 2:2:2 2:2:2:2 2:2:2:2:2Vessel Quantity 6 8 10PumpsPump Type Multi-Stage Multi-Stage Multi-StageMotor HP 3 3 5RPM @ 60 (50 Hz) 3450 (2900) 3450 (2900) 3450 (2900)ElectricalStandard Voltage 220V, 60HZ, 1PH, 16.0A 220V, 60HZ, 1PH, 16.0A 220V, 60HZ, 3PH, 14.7A

Voltage Options



220V, 50HZ, 3PH, 15.9A380V, 50HZ, 1PH, 8.5A460V, 60HZ, 3PH, 7.5A

Systems Dimensions **L x W x H inch (cm) 49 X 33 X 54 (125 X 84 X 137) 55 X 33 X 54 (140 X 84 X 137) 61 X 33 X 54 (155 X 84 X 137)Weight lb. (kg) 350 (159) 400 (181) 450 (204)



� Expandable Design



GT-Series Reverse Osmosis Systems








Benefits

GT-Series Reverse Osmosis Systems are designed for overall

high performance, high recovery rates, minimal energy

consumption and offer great savings with low


GT-Series Reverse

Osmosis Systems feature

an expandable design,

exceptional pre-filtration,

quality components and

allow for many options

and upgrades to suit

most applications.

GT-Series Reverse Osmosis Systems have been engineered for

capacities ranging from 30000 – 40000 gallons per day.


Front

FLEXEON_MKTF-149_GT-RO-Sys_PB_Page 1

GT-Series Reverse Osmosis SystemsStandard Features� Rotrol II Computer Controller � LCD Backlit Display � Pre-Treatment Lockout � Tank Level Input � LED Low Pressure Monitoring and Alarm � Dual TDS Monitoring � Feed Flush


� Rosedale® 10 Micron Filter Bag

� Rosedale® Bag Filter Housing

� Multi-Cartridge Stainless Steel Filter Housing

� Pulsafeeder® Chemical Injection Pumps with Tanks




� Digital Flow Meters













� Concentrate Recycle Valve with Digital Flow Meter

� Rotrol II Computer Controller Expander Board



� Blending Valve



Front

Back


Models GT-30000 GT-40000DesignConfiguration Single Pass Single PassFeed Water Source*** TDS <2000 ppm TDS <2000 ppmStandard Recovery Rate† 65% 65%Recovery with Optional Concentrate Recycle Up to 75% Up to 75%Rejection and Flow RatesNominal Salt Rejection % 98.5 98.5Permeate Flow* gpm (lpm) 20.83 (78.84) 27.78 (105.15)Minimum Feed Flow gpm (lpm) 32.05 (121.00) 42.62 (161.00)Maximum Feed Flow gpm (lpm) 42.0 (159.00) 56.0 (212.00)Minimum Concentrate Flow gpm (lpm) 11.22 (42.50) 14.84 (56.20)ConnectionsFeed inch 2 FLANGE 2 FLANGEPermeate inch 1.5 FNPT 1.5 FNPTConcentrate inch 1.5 FNPT 1.5 FNPTMembranesMembrane(s) Per Vessel 2 2Membrane Quantity 20 24Membrane Size 4040 4040VesselsVessel Array 3:3:2:2 4:4:2:2Vessel Quantity 10 12PumpsPump Type Multi-Stage Multi-StageMotor HP 5 7.5RPM @ 60 (50 Hz) 3450 (2900) 3450 (2900)ElectricalStandard Voltage 220V, 60HZ, 3PH,15.0A 220V, 60HZ, 3PH, 22.0A

Voltage Options220V, 50HZ, 3PH, 16.0A380V, 50HZ, 3PH, 9.5A460V, 60HZ, 3PH, 8.5A

220V, 50HZ, 3PH, 23.0A380V, 50HZ, 3PH, 12.0A460V, 60HZ, 3PH, 11.0A

Systems Dimensions **L x W x H inches (cm) 134 x 43 x 81 (340 x 110 x 205) 134 x 43 x 81 (340 x 110 x 205)Weight lbs (kg) 1500 (680) 1650 (750)


*** Treatment ability of the RO system is dependent on feed water quality. Performance projections must be run for each installation. Note 1: All 50Hz systems come standard with AXEON HF4 Extra Low Energy Membranes.

Operating Limits

Specifications









M2-12240Reverse Osmosis System

Pictured



R1-6140Reverse Osmosis System

Pictured

What offersFounded in 1989, AXEON Water Technologies has grown to become a completesolutions provider for the water treatment industry, primarily used in industrial,commercial, and residential applications. AXEON aims to provide a complete offeringof products to completely address all water treatment applications from point-of-entry(POE) to point-of-use (POU). The company has positioned itself as a true OEM ofmembrane systems, membrane elements and Membrane Housings. AXEON’s establishedtrack record in reverse osmosis membrane systems has allowed for over 5,000 units inthe past five years, establishing the status of AXEON as one of the most admired andwell respected membrane system manufacturers in the industry.

AXEON offers customers flexibility with a comprehensive product offering. Beginexperiencing a higher level of product quality, customer and technical support, and themany benefits of working with AXEON Water Technologies.

A Success StoryWorld Class Water Conditioning Company Eversoft Water Utilizes AXEON Systems to Deliver a Unique Solution

When Eversoft Water was faced with the unique challenge of providing a solutionfor the Universal Studios Los Angeles theme park attractions, they turned to

AXEON Water Technologies as a major RO equipment provider. Three years ago, the first challenge of providing purifiedwater for misting and 3D glasses cleaning was answered by using AXEON Membrane Solutions in the form of a 7000 GPD and 200GPD unit. These systems were installed on the popular Simpsons 3D attractionand have been performing flawlessly since they were first commissioned.

The reliable performance of AXEON reverse osmosis systems has helpedEversoft earn repeat business in the form of multiple orders for systems,with the most recent being used on the new King Kong attraction. Another20,000 GPD installation is planned for another Universal Studios attractionbased on the Transformers movie franchise.

Tony Cox, an Engineering & Water Treatment Specialist at Eversoft, assertsthat “the customers were surprised with the water quality and 2–3 ppm TDS product water delivered by AXEON reverse osmosissystems.” He also cited that the professional design of the systems, ease of operation and troubleshooting has produced positivecustomer feedback and new business opportunities.

The results of this project show the value in utilizing an AXEON reverse osmosis system as one of the key pieces of equipment in awater treatment application. The bottom line is that an AXEON solution will help you gain repeat business while simultaneouslygaining enhanced satisfaction from your customer and the comfort of knowing that a full technical support team is behind you andavailable when you need them. Experience the AXEON difference today!

The AdvantageSpeed� Quick delivery� Pre-engineered� Standardized� Configurable options� Worldwide distribution� Fully documented

Reliable Performance� Large scale membrane & membranesystems provider

� Top-notch design� Dependable components� Thousands of successful installations� Large distributor & dealer network

Your Total Source� Water treatment solutions integration� Trusted performance� Extensive customer and technical support

� Total support before and after the sale

By the Numbers� Over 15,000 AXEON reverse osmosis systems have been sold worldwide and have satisfied the needs of customers.

� Hundreds of configurations, options and upgrades are available to suit specific user needs and applications.

� AXEON Reverse Osmosis Systems have purified over 30,000,000 gallons of water for various applications and markets to date.

Why � Lightweight aluminum frame design across all models

� High reliability and configurability with single through multi-stage system designs

� Compact, expandable, and serviceable design on all models

� Cost-effective, quality components used throughout

� Diverse control integration: � Simple start/stop operation � Optional computer control interfaces on many models

� Pretreat lockout� TDS monitoring� Feed flush cycling� And much more …

How Works for YouAXEON Reverse Osmosis Systems work not only as highlyeffective pieces of standalone equipment, but also as part of acomplete, integrated, water treatment solution. This versatility isoptimal for the following applications to name a few:

� Boiler feed water

� Food and beverage

� Aquaculture

� Pre-treatment for deionization systems

� Spot-free vehicle wash

� Pharmaceutical manufacturing




: a Platform that Meets Your NeedsAXEON Reverse Osmosis Systems provide engineered membrane solutions, including multi-media and carbon filters, water softeners,deionization systems, chemical feed systems, disinfection systems, tanks and pumps. All AXEON RO systems are manufactured in the

United States, and to specification by our expert application engineers. AXEON’s OEM services provide customers with a robust,

configured membrane solution with swift turnaround times and exceptional customer and technical support.

Our reverse osmosis systems are manufactured and given the specific attention by our application engineers in order to achieve

operational and maintenance excellence. AXEON’s position as a true OEM allows the customer to obtain a robust, configured membrane

solution in the shortest amount of time with the highest amount of support available.

PerformanceAXEON instrumentation and controllers offer ease of operationand increased reliability.

LongevityAll AXEON systems use a lightweight, compact, and pre-engineered aluminumframe for corrosion resistance. Quality

AXEON systems only use the mosttrusted brands of pumps and components in the industry.

ReliabilityAXEON pressure vessels

ensure dependable performance.

One SourceAXEON membranesoffer consistent rejection rates and flows.

ReliabilityAll AXEON systems include pre-filtration thatensures long lasting performance while reducing harmful contaminants that maydamage the membranes.

Features and Benefits:


CRO-Series Reverse Osmosis System

CRO-50Reverse Osmosis System*Actual product may vary

Tested and certified by NSFInternational, Standard 58, forthe reduction of Total DissolvedSolids (TDS), Lead, Fluoride,Arsenic V, and Cysts.More Water to the Tank, Less Water to the Drain

This single cartridge designed system takes advantage of cutting edge high flow membrane technology. In addition, a uniqueflow path gives the AXEON CRO-Series Reverse Osmosis System a superior waste-to-product ratio and can reduce waterwaste by 50%. The combination of the two means more water to the tank and less water to the drain. The high flow membranealso ensures faster tank refilling.

Compact and LightweightThe AXEON CRO-Series Reverse Osmosis System has been designed to take up less space under the sink. The completesystem including the tank is approximately the same height and width of a standard system’s tank. The entire system is lessthan 14 inches in depth and can be lifted easily with one hand. The small footprint of this system makes it easier to installin cramped kitchen or bathroom cabinets.

Five Stage System with Single Cartridge DesignThe ultra-compact AXEON CRO-Series Reverse Osmosis System utilizes reverse osmosis technology and features a four stage prefilter, membrane, and postfilter design which is housed inside a single cartridge. A fifth stage post-polishing inline carbon filter is installed between the tank and faucet for even better tasting water.

The system includes a non-metallic faucet, a two gallon white storage tank, tubing, and quick connect fittings for a fast and easy installation.

Stage 1 20 Micron Sediment Prefilter

Stage 2 GAC Prefilter

Stage 3 50 GPD (189.3 LPD) Thin Film Composite Reverse Osmosis Membrane

Stage 4 Post Carbon Filter

Stage 5 In-line GAC Postfilter



CRO-Series Reverse Osmosis System

Feed Water RequirementsPressure 40-80 psi (275 kPa – 552 kPa)

Temp 40°F – 100°F (4°C – 38°C)

TDS <2000 mg / L ppm

Turbidity <1 NTU

SDI <5

pH 4 – 8

Chlorine <1.0 mg/LFeed water must be potable, municipal water. Must be free of potentialmembrane foulants such as Iron, Hydrogen Sulfide and Manganese.

Dimensions and Shipping Weight Width Height Diameter Weight

9.72” W (24.7 cm) 15.38” H (39.1 cm) 13.75” D (34.9 cm) 11 lbs. (5 kg.)

Pre-PlumbedNo preliminary tank or unit assembly is required.The tank, faucet, feed and drain lines are pre-plumbed in the unit and tested at the factory.Final onsite installation is faster and simpler.

Fast FlowThe AXEON CRO-Series Reverse Osmosis Systemincorporates 3/8” tubing for faucet and tankconnections. This larger diameter tubing ensuresa faster flow rate of approximately 30% from the faucet. CRO-50

Reverse Osmosis SystemExploded View

CRO-50Complete system with

tubing and in-line postfilter

Model # CRO-50 MembraneProduction 50 GPD (189.3 LPD)Waste to Product 1.67:1TDS Reduction 96.5%Arsenic V Reduction 97.8%Cysts Reduction >99.99%Fluoride Reduction 96.3%Lead Reduction 98.0%

Tested at 60 psig (4 bar), 500ppm TDS municipal water, 77°F (25°C).

Performance Specifications

Saves Time and MoneyWith only one main cartridge and one inline carbon filter, theAXEON CRO-Series Reverse Osmosis System saves time whenservicing and money on service calls and replacement cartridges.


R1-Series Reverse Osmosis Systems

R1-Series Reverse Osmosis Systems are designed for overall

superior performance, high recovery rates, minimal energy



R1-Series Reverse Osmosis Systems feature a new, innovative

and expandable design. These systems feature only the highest

quality components, including a programmable computer

controller with many built-in standard features, a stainless steel

booster pump for high performance and corrosion resistance,

extra low energy membranes and fiberglass membrane

housings for enhanced performance and durability.

R1-Series Reverse Osmosis Systems have been engineered

for capacities ranging from 1500 – 9000 gallons per day.


� Expandable and Skid Mounted

� Decreased Size of Dimensional Footprint



� Individually Tested and Preserved

� Low Operation and Maintenance Costs


� CE Compliant†




Benefits



Standard Features� C22 Computer Controller � LED Display � Pre-Treatment Lockout � Tank Level Input � Low Pressure Monitoring and Alarm � TDS Monitoring � Feed Flush

� AXEON Permeate and Concentrate Flow Meters

� AXEON Concentrate Recycle Flow Meter

� AXEON Pre-Filter 0 – 100 psi Panel Mounted Glycerin Filled Gauges

� AXEON Pump Discharge and Concentrate 0 – 300 psi Panel Mounted Glycerin Filled Gauges


� Pentek® Single O-Ring Heavy-Duty Filter Housing

� AXEON HF4 Extra Low Energy Membrane Elements

� Fiberglass Membrane Housings – 300 psi





� John Guest® and Sea-Tech® Push and Pull Fittings with Locking Safety Clips


Options and Upgrades� S150 Computer Controller

� S150 Expander Board

� S150 Dual TDS Board and Sensor

� AXEON HF5 Ultra Low Energy Membrane Elements

� AXEON NF3 Nanofiltration Membrane Elements

� AXEON NF4 Nanofiltration Membrane Elements

� Filmtec® LCLE Membrane Elements

� Filmtec LCHR Membrane Elements


6 1 40R1R-SERIES MODEL

HOUSING QUANTITY DESIGNATION

MEMBRANE QUANTITY PER HOUSING

4.0 INCH MEMBRANE DIAMETER

AXEON® Naming Matrix

R1 Tap Water Model

1 1 Vessel2 2 Vessel3 3 Vessel4 4 Vessel5 5 Vessel6 6 Vessel

1 1 Membrane

� Hanna® BL 982411 ORP Controller

� Hanna BL 981411 pH Controller



� Blending Valve

� Permeate Divert Valve


� Caster Wheels

� Wooden Crate

Model Vessel Array Vessel Size Vessel Quantity Membrane Size Membrane QuantityR1-1140 1 4040 1 4040 1R1-2140 1:1 4040 2 4040 2R1-3140 1:1:1 4040 3 4040 3R1-4140 1:1:1:1 4040 4 4040 4R1-5140 1:1:1:1:1 4040 5 4040 5R1-6140 1:1:1:1:1:1 4040 6 4040 6

Array Specifications

61”

26” 33” 25”

25”

1.75”

3”

Notes:

1. All dimensions are given in inchesand [centimeters].

2. R1-6140 AXEON model shown.

POINTOF USEFLOW METER

PERMEATE

FLOW METERCONCENTRATE DRAIN

FM

FMTDS

0-300 PI

CV

HF4 MEMBRANES

FLOW METERCONCENTRATE RECYCLE

CONCENTRATE RECYCLE VALVE

CONCENTRATEVALVE

FM

0-300 PI

REVERSE OSMOSISPUMP

LPS

5 MICRONSEDIMENT

20” FILTERHOUSING

0-100 PI x2SOV

WATER INLET




Maximum Feed Temperature °F (°C) 85 (29) Maximum Free Chlorine ppm 0Minimum Feed Temperature °F (°C) 40 (4.4) Maximum TDS ppm 2,000Maximum Ambient Temperature °F (°C) 120 (48.9) Maximum Hardness gpg 0Minimum Ambient Temperature °F (°C) 40 (4.4) Maximum pH (Continuous) 11Maximum Feed Pressure psi (bar) 85 (5.9) Minimum pH (Continuous) 5Minimum Feed Pressure psi (bar) 45 (3.1) Maximum pH (Cleaning 30 Min.) 12Maximum Piping Pressure psi (bar) 200 (13.8) Minimum pH (Cleaning 30 Min.) 2Maximum SDI Rating SDI <3 Maximum Turbidity NTU 1

Operating Limits


Low temperatures and high feed water TDS levels will significantly affect the system’s production capabilities. Computer projections should be run for individual applications which do not meet or exceed minimum and maximum operating limits.

Scale prevention measures must be taken to prolong membrane life.

* Product flow and recovery rates are based on equipment test parameters.** Does not include operating space requirements.


SpecificationsModels R1-1140 R1-2140 R1-3140 R1-4140 R1-5140 R1-6140DesignConfiguration Single Pass Single Pass Single Pass Single Pass Single Pass Single PassFeed Water Source*** TDS<2,000 ppm TDS<2,000 ppm TDS<2,000 ppm TDS<2,000 ppm TDS<2,000 ppm TDS<2,000 ppmStandard Recovery Rate 50-75% 50-75% 50-75% 50-75% 50-75% 50-75%Rejection and Flow RatesNominal Salt Rejection % 99 99 99 99 99 99Permeate Flow* gpm (lpm) 1.0 (3.9) 2.1 (7.9) 3.1 (11.8) 4.2 (15.8) 5.2 (19.7) 6.3 (23.7)Minimum Feed Flow gpm (lpm) 4.0 (15) 5.1 (19) 6.1 (32) 7.2 (27) 8.2 (31) 9.3 (35)Maximum Feed Flow gpm (lpm) 16 (61) 16 (61) 16 (61) 16 (61) 16 (61) 16 (61)Minimum Concentrate Flow gpm (lpm)with Recycle Based on 75% Recovery 3 (11) 3 (11) 3 (11) 3 (11) 3 (11) 3 (11)

ConnectionsFeed inch 1 FNPT 1 FNPT 1 FNPT 1 FNPT 1 FNPT 1 FNPTPermeate inch ¾ FNPT ¾ FNPT ¾ FNPT 1 FNPT 1 FNPT 1 FNPTConcentrate inch ¾ FNPT ¾ FNPT ¾ FNPT 1 FNPT 1 FNPT 1 FNPTMembranesMembranes Per Vessel 1 1 1 1 1 1Membrane Quantity 1 2 3 4 5 6Membrane Size 4040 4040 4040 4040 4040 4040VesselsVessel Array 1 1:1 1:1:1 1:1:1:1 1:1:1:1:1 1:1:1:1:1:1Vessel Quantity 1 2 3 4 5 6PumpsPump Type Multi-Stage Multi-Stage Multi-Stage Multi-Stage Multi-Stage Multi-StageMotor HP (kw) 1.5 (2) 1.5 (2) 1.5 (2) 1.5 (2) 1.5 (2) 2 (2)RPM @ 60 (50 Hz) 3450 (2875) 3450 (2875) 3450 (2875) 3450 (2875) 3450 (2875) 3450 (2875)ElectricalStandard Voltage 220V, 60Hz, 1Ph, 8.7A 220V, 60Hz, 1Ph, 8.7A 220V, 60Hz, 1Ph, 8.7A 220V, 60Hz, 1Ph, 8.7A 220V, 60Hz, 1Ph, 8.7A 220V, 60Hz, 1Ph, 14.1A

Voltage Options

220V, 50Hz, 1Ph, 14.1A220V, 50Hz, 3Ph, 7.9A220V, 60Hz, 3Ph, 6.7A460V, 60Hz, 3Ph, 3.9A






Systems Dimensions **

L x W x H inch (cm) 29 x 26 x 61(73 x 66 x 155)

29 x 26 x 61(73 x 66 x 155)

29 x 26 x 61(73 x 66 x 155)

33 x 26 x 61(84 x 66 x 155)

33 x 26 x 61(84 x 66 x 155)

33 x 26 x 61(84 x 66 x 155)

Weight lb. (kg) 250 (110) 290 (130) 360 (160) 460 (210) 590 (270) 750 (340)


M1-Series Reverse Osmosis Systems

M1-Series Reverse Osmosis Systems are designed for overall superior performance, high recovery rates, minimal energy

consumption and offer great savings with low maintenance and operation costs.


feature a new, innovative and

expandable design which utilizes

fewer fittings and connections.

These systems feature only the

highest quality components,

including a programmable

computer controller with

many built-in standard

features, a stainless steel

booster pump for high

performance and

corrosion resistance,

extra low energy

membranes and

fiberglass membrane


M1-Series Reverse Osmosis Systems have been engineered for



� Expandable and Skid Mounted






� CE Compliant†




Benefits

M1-Series Reverse Osmosis SystemsStandard FeaturesModels – M1-4240, M1-6240, M1-8240� S150 Computer Controller � LCD Backlit Display � Pre-Treatment Lockout � Tank Level Input � Low Pressure Monitoring and Alarm � Dual TDS Monitoring � Expander Board � Hour Meter � Feed Flush

Models – M1-10240, M1-12240� Rotrol II Computer Controller � LCD Backlit Display � Pre-Treatment Lockout � Tank Level Input � LED Low Pressure Monitoring and Alarm � Hour Meter � Dual TDS Monitoring � Expander Board � Feed Flush � Digital Flow Meters � Concentrate Recycle with Digital Flow Meter

� AXEON Permeate and Concentrate Flow Meters

� AXEON Concentrate Recycle Flow Meter� Stainless Steel Concentrate Globe Valve� AXEON Pre-Filter 0-100 psi Panel Mounted Glycerin Filled Gauges

� AXEON Pump Discharge andConcentrate 0-300 psi Panel MountedGlycerin Filled Gauges

Options and Upgrades� S150 Expander Board***� S150 Dual TDS Board***� Rotroll ll Controller Feed TDS Sensor� Variable Frequency Drive††� AXEON HF5 Ultra Low EnergyMembrane Elements

� AXEON NF3 Nanofiltration MembraneElements

� AXEON NF4 Nanofiltration MembraneElements

� Filmtec® LCLE Membrane Elements


� FSI® Bag Filter Housing with StainlessSteel Stand

� FSI 5 Micron Filter Bag� AXEON HF4 Extra Low EnergyMembrane Elements

� Fiberglass Membrane Housings – 450 psi� Goulds® Vertical Multi-Stage StainlessSteel Booster Pump


� Feed Low Pressure Switch� Clean-In-Place (CIP) Ports� Victaulic® Style Fittings� Permeate Sample Ports� White Powder Coated Aluminum Frame� Caster Wheels� Wooden Crate

� Filmtec LCHR Membrane Elements� Hanna® BL 981411 pH Meter***� Hanna BL 982411 ORP Meter***� Rotroll ll pH Monitoring� Rotroll ll ORP Monitoring� Chemical Pump Outlet� Blending Valve� High Pressure Tank Switch� Pump Pressure Relief Valve†� Permeate Divert Valve

12 2 40M1M-SERIES MODEL


MEMBRANE QUANTITY PER HOUSING ø


AXEON Naming Matrix

M1 Tap Water Model

4 4 Vessel6 6 Vessel8 8 Vessel10 10 Vessel12 12 Vessel

2 2 Membranes

†† Standard for all 50Hz Systems *** Only available on the following models: M1-4240, M1-6240, M1-8240

Model Vessel Array Vessel Size Vessel Quantity Membrane Size Membrane QuantityM1-4240 1:1:1:1 4080 4 4040 8M1-6240 2:2:1:1 4080 6 4040 12M1-8240 3:3:2 4080 8 4040 16M1-10240 3:3:2:2 4080 10 4040 20M1-12240 3:3:2:2:2 4080 12 4040 24


100” 31”

64”

96”

47”

26”Notes:

1. All dimensions are given in inches and [centimeters].

2. Model M1-12240 AXEON model shown.

CV FM

FLOW METERPERMEATE

FLOW METERCONCENTRATE

POINTOF USE

DRAIN

0-300PI

FM

CONCENTRATE RECYCLE

HF4 MEMBRANES

FLOW METER

FM

REVERSE OSMOSISPUMP

0-300 PI

5 MICRONBAG FILTER

0-100PI

0-100PI

FEEDVALVE

WATER INLET

LPS

TDS




Maximum Feed Temperature °F (°C) 85 (29) Maximum Free Chlorine ppm 0Minimum Feed Temperature °F (°C) 40 (4.4) Maximum TDS ppm 2,000Maximum Ambient Temperature °F (°C) 120 (48.9) Maximum Hardness gpg 0Minimum Ambient Temperature °F (°C) 40 (4.4) Maximum pH (Continuous) 11Maximum Feed Pressure psi (bar) 85 (5.9) Minimum pH (Continuous) 5Minimum Feed Pressure psi (bar) 45 (3.1) Maximum pH (Cleaning 30 Min.) 12Maximum Operating Pressure psi (bar) 200 (13.8) Minimum pH (Cleaning 30 Min.) 2Maximum SDI Rating SDI <3 Maximum Turbidity NTU 1

Operating Limits

Test Parameters: 550 TDS Filtered (5 Micron), De-Chlorinated, Municipal Feed Water, 65 psi (4.5 bar) Feed Pressure, 100 psi (6.89 bar) Operating Pressure, 77Degrees F (25 Degrees C), Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.Low temperatures and high feed water TDS levels will significantly affect the system’s production capabilities. Computer projections should be run for individual applications which do not meet or exceed minimum and maximum operating limits.Scale prevention measures must be taken to prolong membrane life.

Models M1-4240 M1-6240 M1-8240 M1-10240 M1-12240DesignConfiguration Single Pass Single Pass Single Pass Single Pass Single PassFeed Water Source*** TDS<2,000 ppm TDS<2,000 ppm TDS<2,000 ppm TDS<2,000 ppm TDS<2,000 ppmStandard Recovery Rate 50–75% 50–75% 50–75% 50–75% 60–75%Rejection and Flow RatesNominal Salt Rejection % 99 99 99 99 99Permeate Flow* gpm (lpm) 8.3 (31.6) 12.5 (47.3) 16.7 (63.1) 20.8 (78.9) 25.0 (94.6)Minimum Feed Flow gpm (lpm) 11.3 (42.9) 15.5 (58.7) 22.7 (85.8) 26.8 (101.6) 31.0 (117.4)Maximum Feed Flow gpm (lpm) 48 (181.7) 48 (181.7) 48 (181.7) 48 (181.7) 48 (181.7)Minimum Concentrate Flow gpm (lpm) with Recycle Based on 75% Recovery 3.00 (11.36) 4.17 (15.79) 5.56 (21.04) 6.95 (26.31) 8.33 (31.53

ConnectionsFeed inch 1.5” FNPT 1.5” FNPT 1.5” FNPT 1.5” FNPT 1.5” FNPTPermeate inch 1” FNPT 1” FNPT 1” FNPT 1.5” FNPT 1.5” FNPTConcentrate inch 1” FNPT 1” FNPT 1” FNPT 1.5” FNPT 1.5” FNPTCPI inch 1” FNPT 1” FNPT 1” FNPT 1” FNPT 1” FNPTMembranesMembrane(s) Per Vessel 2 2 2 2 2Membrane Quantity 8 12 16 20 24Membrane Size 4040 4040 4040 4040 4040VesselsVessel Array 1:1:1:1 2:2:1:1 3:3:2 3:3:2:2 3:3:2:2:2Vessel Quantity 4 6 8 10 12PumpsPump Type Multi-Stage Multi-Stage Multi-Stage Multi-Stage Multi-StageMotor HP (kw) 3 3 5 7.5 7.5RPM @ 60 Hz 3450 3450 3450 3450 3450RPM @ 50 Hz VFD at 60Hz VFD at 60Hz VFD at 60Hz VFD at 60Hz VFD at 60HzElectricalStandard Voltage 220V, 60Hz, 1Ph, 14.6A 220V, 60Hz, 1Ph, 14.6A 220V, 60Hz, 3Ph, 13.6A 220V, 60Hz, 3Ph, 19.2A 220V, 60Hz, 3Ph, 19.2A

Voltage Options

220V, 50Hz, 1Ph, 17.4A220V, 50Hz, 3Ph, 10.6A220V, 60Hz, 3 Ph, 9A460V, 60Hz, 3 Ph, 5A

220V, 50Hz, 1Ph, 17.4A220V, 50Hz, 3Ph, 10.6A220V, 60Hz, 3 Ph, 9A460V, 60Hz, 3 Ph, 5A

220V, 50Hz, 3Ph, 16.1A460V, 60Hz, 3 Ph, 7A

220V, 50Hz, 3Ph, 22.9A460V, 60Hz, 3 Ph, 9.7A

220V, 50Hz, 3Ph, 22.9A460V, 60Hz, 3 Ph, 9.7A



31 x 100 x 64(78 x 254 x 162)

31 x 100 x 64(78 x 254 x 162)

31 x 100 x 64(78 x 254 x 162)

31 x 100 x 64(78 x 254 x 162)

Weight lb. (kg) 1060 (481) 1150 (520) 1260 (572) 1350 (612) 1450 (658)

* Product flow and recovery rates are based on equipment test parameters. †† Standard for all 50Hz Systems ** Does not include operating space requirements.


Specifications



R2-Series Reverse Osmosis Systems are designed for overall

superior performance, high recovery rates, minimal energy



R2-Series Reverse Osmosis Systems feature a new, innovative

and expandable design which utilizes fewer fittings and

connections. These systems feature only the highest quality

components, including a programmable computer controller

with many built-in standard features, a stainless steel booster

pump for high performance and corrosion resistance,

extra low energy membranes and fiberglass membrane


R2-Series Reverse Osmosis Systems have been engineered for


■ Fully Equipped and Customizable

■ Expandable and Skid Mounted

■ Decreased Size of Dimensional Footprint

■ Components Easily Accessible

■ Pre-Plumbed, Wired and Assembled

■ Individually Tested and Preserved

■ Low Operation and Maintenance Costs

■ Easy Maintenance and Servicing

■ CE Compliant†

■ 1-Year Limited Warranty

■ Made in the U.S.A.

Benefits


AXEON_MKTF–109_R2_PB_Page 1 3/5/12 4:32 PM


Options and Upgrades■ S150 Expander Board

■ Variable Frequency Drive (VFD)

■ FilmTec LCHR Membrane Elements

■ Pump Pressure Relief Valve†

■ Blending Valve

■ Permeate Divert Valve

■ Chemical Pump Outlet

6 1 40R2R-SERIES MODEL




AXEON Naming Matrix

R2 Brackish Water Model

1 1 Vessel2 2 Vessel3 3 Vessel4 4 Vessel5 5 Vessel6 6 Vessel

1 1 Membrane

Standard Features■ S150 Computer Controller ◆ LCD Backlit Display ◆ Pre-Treatment Lockout ◆ Tank Level Input ◆ Low Pressure Monitoring and Alarm ◆ Dual TDS Monitoring ◆ Feed Flush

■ AXEON Permeate and Concentrate Flow Meters

■ AXEON Pre-Filter 0 – 100 psi Panel Mounted Glycerin Filled Gauges

■ AXEON Pump Discharge and Concentrate 0 – 600 psi Panel Mounted Glycerin Filled Gauges

■ 5 Micron Sediment Pre-Filter

■ Pentek® Single O-Ring Heavy-Duty Filter Housing

■ FilmTec® LCLE Low Energy Membrane Elements

■ Fiberglass Membrane Housings – 450 psi

■ Permeate Sample Ports

■ Goulds® Vertical Multi-Stage Stainless Steel Booster Pump

■ Feed Solenoid Valve with Manual Bypass

■ Nason® Feed Low Pressure Switch

■ Nason Pump High Pressure Switch

■ Clean-in-Place (CIP) Ports

■ Victaulic® Style Fittings


■ High Pressure Stainless Steel Tubing and Fittings

■ White Powder Coated Aluminum Frame


■ Hanna® BL 981411 pH Controller

■ Hanna BL 982411 ORP Controller


■ High Pressure Tank Switch

■ Caster Wheels

■ Wooden Crate

AXEON_MKTF–109_R2_PB_ Page 2 3/16/12 4:07 PM

61”

26” 37” 25”

25”

1.75”

3”

Notes:

1. All dimensions are given in inches and[centimeters].

2. R2-6140 AXEON model shown.

POINTOF USEFLOW METER

PERMEATE

FM

DRAIN

CONCENTRATEVALVE

FLOW METERCONCENTRATE

FM

TDSCV

0-600 PI

CV

FILMTEC LCLE MEMBRANES

0-600 PIHPS

REVERSE OSMOSISPUMP

LPS TDS

5 MICRONSEDIMENT

20” FILTERHOUSING

0-100 PI x2SOV

WATER INLET

Model Vessel Array Vessel Size Vessel Quantity Membrane Size Membrane QuantityR2-1140 1 4040 1 4040 1R2-2140 1:1 4040 2 4040 2R2-3140 1:1:1 4040 3 4040 3R2-4140 1:1:1:1 4040 4 4040 4R2-5140 1:1:1:1:1 4040 5 4040 5R2-6140 1:1:1:1:1:1 4040 6 4040 6


AXEON_MKTF–109_R2_PB_Page 3 3/5/12 4:33 P




Maximum Feed Temperature °F (°C) 85 (29) Maximum Free Chlorine ppm 0Minimum Feed Temperature °F (°C) 40 (4.4) Maximum TDS ppm 10,000Maximum Ambient Temperature °F (°C) 120 (48.9) Maximum Hardness gpg 0Minimum Ambient Temperature °F (°C) 40 (4.4) Maximum pH (Continuous) 11Maximum Feed Pressure psi (bar) 85 (5.9) Minimum pH (Continuous) 5Minimum Feed Pressure psi (bar) 45 (3.1) Maximum pH (Cleaning 30 Min.) 12Maximum Operating Pressure psi (bar) 400 (27.6) Minimum pH (Cleaning 30 Min.) 2Maximum SDI Rating SDI <3 Maximum Turbidity NTU 1

Operating Limits

Test Parameters: 10,000 TDS Filtered (5 Micron), De-Chlorinated, Feed Water, 65 psi (4.5 bar) Feed Pressure, 350 psi (24.13 bar) Operating Pressure, 77 DegreesF (25 Degrees C), Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.Low temperatures and high feed water TDS levels will significantly affect the system’s production capabilities. Computer projections should be run for individual applications which do not meet or exceed minimum and maximum operating limits.Scale prevention measures must be taken to prolong membrane life.

Models R2-1140 R2-2140 R2-3140 R2-4140 R2-5140 R2-6140DesignConfiguration Single Pass Single Pass Single Pass Single Pass Single Pass Single PassFeed Water Source *** TDS<10,000 ppm TDS<10,000 ppm TDS<10,000 ppm TDS<10,000 ppm TDS<10,000 ppm TDS<10,000 ppmStandard Recovery Rate 15 – 25% 30 – 40% 40 – 50% 40 – 55% 40 – 60% 40 – 65%Rejection and Flow RatesNominal Salt Rejection % 99.2% 99.2% 99.2% 99.2% 99.2% 99.2%Permeate Flow* gpm (lpm) 1.04 (3.94) 2.08 (7.89) 3.13 (11.83) 4.17 (15.77) 5.21 (19.72) 6.25 (23.66)Minimum Feed Flow gpm (lpm) 4.04 (15.3) 5.08 (19.2) 6.13 (23.2) 7.17 (27.1) 8.21 (31.1) 9.25 (35.0)Maximum Feed Flow gpm (lpm) 14.00 (53.0) 14.00 (53.0) 14.00 (53.0) 14.00 (53.0) 14.00 (53.0) 14.00 (53.0)Minimum Concentrate Flow gpm (lpm) 3.00 (11.36) 3.00 (11.36) 3.00 (11.36) 3.00 (11.36) 3.00 (11.36) 3.00 (11.36)ConnectionsFeed inch 1 FNPT 1 FNPT 1 FNPT 1 FNPT 1 FNPT 1 FNPTPermeate inch ¾ FNPT ¾ FNPT ¾ FNPT 1 FNPT 1 FNPT 1 FNPTConcentrate inch ¾ FNPT ¾ FNPT ¾ FNPT 1 FNPT 1 FNPT 1 FNPTCIP inch ¾ FNPT ¾ FNPT ¾ FNPT ¾ FNPT ¾ FNPT ¾ FNPTMembranesMembrane Per Vessel 1 1 1 1 1 1Membrane Quantity 1 2 3 4 5 6Membrane Size 4040 4040 4040 4040 4040 4040VesselsVessel Array 1 1:1 1:1:1 1:1:1:1 1:1:1:1:1 1:1:1:1:1:1

Vessel Quantity 1 2 3 4 5 6PumpsPump Type Multi-Stage Multi-Stage Multi-Stage Multi-Stage Multi-Stage Multi-StageMotor HP (kw) 3 3 3 5 5 5RPM @ 60/50 Hz 3450 3450 3450 3450 3450 3450ElectricalStandard Voltage 220V, 60Hz, 1Ph, 14.6A 220V, 60Hz, 1Ph, 14.6A 220V, 60Hz, 1Ph, 14.6A 220V, 60Hz, 3Ph, 13.6A 220V, 60Hz, 3Ph, 13.6A 220V, 60Hz, 3Ph, 13.6A

Voltage Options

220V, 50Hz, 1Ph, 17.4A220V, 50Hz, 3Ph, 10.6A

220V, 60Hz, 3Ph, 9A460V, 60Hz, 3Ph, 5A

220V, 50Hz, 1Ph, 17.4A220V, 50Hz, 3Ph, 10.6A

220V, 60Hz, 3Ph, 9A460V, 60Hz, 3Ph, 5A

220V, 50Hz, 1Ph, 17.4A220V, 50Hz, 3Ph, 10.6A

220V, 60Hz, 3Ph, 9A460V, 60Hz, 3Ph, 5A

220V, 50Hz, 3Ph, 16.1A460V, 60Hz, 3Ph, 7A

220V, 50Hz, 3Ph, 16.1A460V, 60Hz, 3Ph, 7A

220V, 50Hz, 3Ph, 16.1A460V, 60Hz, 3Ph, 7A



27 x 26 x 61(69 x 66 x 155)

30 x 26 x 61(75 x 66 x 155)

32 x 26 x 61(80 x 66 x 155)

32 x 26 x 61(80 x 66 x 155)

37 x 26 x 61(94 x 66 x 155)

Weight lb. (kg) 560 (250) 590 (270) 620 (280) 650 (300) 680 (310) 700 (320)

* Product flow and recovery rates are based on equipment test parameters. ** Does not include operating space requirements.


Specifications

AXEON_MKTF–109_R2_PB_Page 4 3/5/12 4:32 PM



M2-Series Reverse Osmosis Systems are designed for overall superior performance, high recovery rates, minimal energy

consumption and offer great savings with low maintenance and operation costs.


feature a new, innovative and

expandable design which utilizes

fewer fittings and connections.

These systems feature only the

highest quality components,

including a programmable

computer controller with

many built-in standard

features, a stainless steel

booster pump for high

performance and

corrosion resistance,

extra low energy

membranes and

fiberglass membrane


M2-Series Reverse Osmosis Systems have been engineered for


■ Fully Equipped and Customizable

■ Expandable and Skid Mounted

■ Components Easily Accessible

■ Pre-Plumbed, Wired and Assembled

■ Individually Tested and Preserved

■ Low Operation and Maintenance Costs

■ Easy Maintenance and Servicing

■ CE Compliant†

■ 1-Year Limited Warranty

■ Made in the U.S.A.


Benefits

AXEON_MKTF–116_M2_PB_Page 1 3/5/12 6:15 PM

M2-Series Reverse Osmosis SystemsStandard FeaturesModels – M2-4240, M2-6240, M2-8240■ S150 Computer Controller ◆ LCD Backlit Display ◆ Pre-Treatment Lockout ◆ Tank Level Input ◆ Low Pressure Monitoring and Alarm ◆ Dual TDS Monitoring ◆ Hour Meter ◆ Feed Flush

Models – M2-10240, M2-12240■ Rotrol II Computer Controller ◆ LCD Backlit Display ◆ Pre-Treatment Lockout ◆ Tank Level Input ◆ LED Low Pressure Monitoring and Alarm ◆ Hour Meter ◆ Dual TDS Monitoring ◆ Expander Board ◆ Feed Flush ◆ Digital Flow Meters

■ AXEON Permeate and Concentrate Flow Meters

■ Stainless Steel Concentrate Globe Valve

■ AXEON Pre-Filter 0-100 psi Panel Mounted Glycerin Filled Gauges

■ AXEON Pump Discharge 0-600 psi PanelMounted Glycerin Filled Stainless Steel Gauges

■ FSI® 5 Micron Filter Bag

■ FSI Bag Filter Housing with Stainless Steel Stand

■ Filmtec® LCLE Membrane Elements

Options and Upgrades■ S150 Expander Board***

■ Rotroll ll Computer Controller***

■ Rotroll ll pH Monitoring***

■ Rotroll ll ORP Monitoring***

■ Variable Frequency Drive††

■ Filmtec LCHR Membrane Elements

■ High Pressure Tank Switch



■ High Pressure Stainless Steel Tubing and Fittings

■ White Powder Coated Aluminum Frame

■ Caster Wheels

■ Wooden Crate

12 2 40M2M-SERIES MODEL




AXEON Naming Matrix

M2 Brackish Water Model

4 4 Vessel6 6 Vessel8 8 Vessel10 10 Vessel12 12 Vessel

2 2 Membranes

■ Fiberglass Membrane Housings – 450 psi

■ Goulds® Vertical Multi-Stage StainlessSteel Booster Pump

■ Feed Solenoid Valve with Manual Bypass

■ Nason® Feed Low Pressure Switch

■ Nason® Pump High Pressure Switch

■ Clean-In-Place (CIP) Ports

■ Victaulic® Style Fittings

■ Hanna® BL 981411 pH Controller***

■ Hanna BL 982411 ORP Controller***

■ Chemical Pump Outlet

■ Blending Valve

■ Permeate Divert Valve

■ Pump Pressure Relief Valve†

†† Standard for all 50Hz Systems *** Only available on the following models: M2-4240, M2-6240, M2-8240

AXEON_MKTF–116_M2_PB_ Page 2 3/16/12 4:08 PM

Model Vessel Array Vessel Size Vessel Quantity Membrane Size Membrane QuantityM2-4240 2:2 4080 4 4040 8M2-6240 2:2:2 4080 6 4040 12M2-8240 3:3:2 4080 8 4040 16M2-10240 3:3:2:2 4080 10 4040 20M2-12240 3:3:2:2:2 4080 12 4040 24


64”

31”100”

96”

47”

26” Notes:

1. All dimensions are given in inches and [centimeters].

2. Model M2-12240 AXEON model shown.

FILMTEC® LCLE MEMBRANES 0-600PI0-600

PI

CONCENTRATE FLOW METER

FM

DRAIN

PERMEATE FLOW METER

FM

POINTOF USE

TDSCV

REVERSE OSMOSISPUMP

HPSLPS0-100

PI

5 MICRONBAG FILTER

0-100PI

FEEDVALVE

WATER INLET





Maximum Feed Temperature °F (°C) 85 (29) Maximum Free Chlorine ppm 0Minimum Feed Temperature °F (°C) 40 (4.4) Maximum TDS ppm 10,000Maximum Ambient Temperature °F (°C) 120 (48.9) Maximum Hardness gpg 0Minimum Ambient Temperature °F (°C) 40 (4.4) Maximum pH (Continuous) 11Maximum Feed Pressure psi (bar) 85 (59) Minimum pH (Continuous) 5Minimum Feed Pressure psi (bar) 45 (3.1) Maximum pH (Cleaning 30 Min.) 12Maximum Operating Pressure psi (bar) 400 (27.6) Minimum pH (Cleaning 30 Min.) 2Maximum SDI Rating SDI <3 Maximum Turbidity NTU 1

Operating Limits

Test Parameters: 10,000 TDS Filtered (5 Micron), De-Chlorinated, Feed Water, 65 psi (4.5 bar) Feed Pressure, 350 psi (24.13 bar) Operating Pressure, 77 DegreesF (25 Degrees C), Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.Low temperatures and high feed water TDS levels will significantly affect the system’s production capabilities. Computer projections should be run for individual applications which do not meet or exceed minimum and maximum operating limits.Scale prevention measures must be taken to prolong membrane life.

Models M2-4240 M2-6240 M2-8240 M2-10240 M2-12240DesignConfiguration Single Pass Single Pass Single Pass Single Pass Single PassFeed Water Source*** TDS<10,000 ppm TDS<10,000 ppm TDS<10,000 ppm TDS<10,000 ppm TDS<10,000 ppmStandard Recovery Rate 40–50% 40–50% 40–50% 30–45% 46–52%Rejection and Flow RatesNominal Salt Rejection % 99.2 99.2 99.2 99.2 99.2Permeate Flow* gpm (lpm) 8.3 (31.6) 12.5 (47.3) 16.7 (63.1) 20.8 (78.9) 25.0 (94.6)Minimum Feed Flow gpm (lpm) 14.3 (54.3) 18.5 (70.0) 22.7 (85.8) 26.8 (101.6) 31.0 (117.4)Maximum Feed Flow gpm (lpm) 28 (106) 28 (106) 42 (159) 42 (159) 42 (159)Minimum Concentrate Flow gpm (lpm) 6 (23) 6 (23) 6 (23) 6 (23) 6 (23)ConnectionsFeed inch 1.5” FNPT 1.5” FNPT 1.5” FNPT 1.5” FNPT 1.5” FNPTPermeate inch 1” FNPT 1” FNPT 1” FNPT 1.5” FNPT 1.5” FNPTConcentrate inch 1” FNPT 1” FNPT 1” FNPT 1.5” FNPT 1.5” FNPTCPI inch 1” FNPT 1” FNPT 1” FNPT 1” FNPT 1” FNPTMembranesMembrane(s) Per Vessel 2 2 2 2 2Membrane Quantity 8 12 16 20 24Membrane Size 4040 4040 4040 4040 4040VesselsVessel Array 2:2 2:2:2 3:3:2 3:3:2:2 3:3:2:2:2Vessel Quantity 4 6 8 10 12PumpsPump Type Multi-Stage Multi-Stage Multi-Stage Multi-Stage Multi-StageMotor HP (kw) 7.5 7.5 10 10 15RPM @ 60 Hz 3450 3450 3450 3450 3450RPM @ 50 Hz VFD at 60Hz VFD at 60Hz VFD at 60Hz VFD at 60Hz VFD at 60HzElectricalStandard Voltage 220V, 60Hz, 3Ph, 19.2A 220V, 60Hz, 3Ph, 19.2A 220V, 60Hz, 3Ph, 25.9A 220V, 60Hz, 3Ph, 25.9A 220V, 60Hz, 3Ph, 37.6A

Voltage Options 220V, 50Hz, 3Ph,22.9A460V, 60Hz, 3Ph, 9.7A

220V, 50Hz, 3Ph, 22.9A460V, 60Hz, 3Ph, 9.7A

220V, 50Hz, 3Ph, 30.9A 460V, 60Hz, 3Ph, 12.9A

220V, 50Hz, 3Ph, 30.9A460V, 60Hz, 3Ph, 12.9A

220V, 50Hz, 3Ph, 45A 460V, 60Hz, 3Ph, 18.5A



31 x 100 x 64(78 x 254 x 162)

31 x 100 x 64(78 x 254 x 162)

31 x 100 x 64(78 x 254 x 162)

31 x 100 x 64(78 x 254 x 162)

Weight lb. (kg) 1260 (572) 1350 (611) 1460 (662) 1550 (703) 1650 (748)



Specifications



S3-Series Reverse Osmosis Systems

S3-Series Reverse Osmosis Systems are

engineered for high rejection rates.

S3-Series Reverse Osmosis

Systems are designed and

manufactured for seawater

applications specifically tailored

for capacities ranging from


The S3-Series Reverse Osmosis

Systems feature a unique and

innovative compact design that allows for easy installation

in any size area. The high grade corrosion resistant aluminum frame features a modular 2-in1 design that

allows for the system to be divided in to multiple assemblies for easier mounting. The S3-Series is also equipped with

premium components which include a 316L SS plunger-type pump for high performance and corrosion resistance,

a programmable computer controller with many built-in features, fiberglass membrane housings for durability and FilmTec™

seawater membranes for high quality product water.


� High Quality Components

� Compact 2-in-1 Design


Benefits

S3-4125Reverse Osmosis System




� CE Compliant†




Options and Upgrades� Booster Pump

� Chemical Pump Switch

� Pressure Relief Valve †

� Wooden Crate

4 1 25S3S-SERIES MODEL




AXEON Naming Matrix

S3 Sea Water Model

1 1 Vessel2 2 Vessel3 3 Vessel4 4 Vessel

1 1 Membrane

Standard Features

S3-4125Reverse Osmosis System

� S150 Computer Controller � LCD Backlit Display � Tank Level Input � Low Pressure Monitoring and Alarm � High Pressure Monitoring and Alarm � TDS Monitoring

� KING® Permeate Flow Meter

� KING Concentrate Flow Meter

� AXEON Pre-Filter 0-100 psi Panel Mounted 316 Stainless SteelGlycerin Filled Gauges

� AXEON Pump Discharge and Concentrate 0-1000 psi StainlessSteel Glycerin Filled Gauges

� AXEON 316 Stainless Steel Needle Valve

� 10 Micron and 5 Micron Pleated Sediment Pre-Filters

� Single O-Ring Heavy-Duty Filter Housing

� FilmTec® High Rejection Seawater Membranes

� High Pressure Filament-Wound FRP Membrane Housings –1000 psi

� GP® 316 Stainless Steel Plunger-Type Pump

� TEFC Motor with Thermal Motor Protection

� Plast-O-Matic® PVC Flush Solenoid Valve

� SS Feed Low Pressure Switch

� SS High Pressure Pump Switch

� High Pressure 316 Stainless Steel Tubing and Fittings

� High Pressure Hose with Re-usable SS Fittings

� High Grade Powder Coated Aluminum Frame

18”

48”

48”

18”

24”

9”

Model Vessel Array Vessel Size Vessel Quantity Membrane Size Membrane QuantityS3-1125 1 2540 1 2540 1S3-2125 1:1 2540 2 2540 2S3-3125 1:1:1 2540 3 2540 3S3-4125 1:1:1:1 2540 4 2540 4


Notes:

1. All dimensions are given in inches.

2. S3-4125 AXEON model shown.




Test Parameters: 35,000 TDS Filtered (5 Micron), De-Chlorinated, Feed Water, 65 psi (4.5 bar) Feed Pressure, 850 psi (58.61 bar) Operating Pressure, 77 7289690k Degrees F (25 Degrees C), Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.Low temperatures and high feed water TDS levels will significantly affect the system’s production capabilities. Computer projections should be run for individual applications which do not meet or exceed minimum and maximum operating limits.Scale prevention measures must be taken to prolong membrane life.

Specifications

Maximum Feed Temperature °F (°C) 85 (29) Maximum Free Chlorine ppm 0Minimum Feed Temperature °F (°C) 40 (4.4) Maximum TDS ppm 45,000Maximum Ambient Temperature °F (°C) 120 (48.9) Maximum Hardness gpg 0Minimum Ambient Temperature °F (°C) 40 (4.4) Maximum pH (Continuous) 11Maximum Feed Pressure psi (bar) 85 (5.9) Minimum pH (Continuous) 5Minimum Feed Pressure psi (bar) 45 (3.1) Maximum pH (Cleaning 30 Min.) 12Maximum Operating Pressure psi (bar) 1000 (68.95) Minimum pH (Cleaning 30 Min.) 2Minimum SDI Rating SDI <3 Maximum Turbidity NTU 1

Operating Limits

Models S3-1125 S3-2125 S3-3125 S3-4125DesignConfiguration Single Pass Single Pass Single Pass Single PassFeed Water Source*** TDS<45,000 ppm TDS<45,000 ppm TDS<45,000 ppm TDS<45,000 ppmStandard Recovery Rate 15% 20% 25% 36%Rejection and Flow RatesNominal Salt Rejection % 99% 99% 99% 99%Permeate Flow* gpm (lpm) .41 (24,600) .83 (49,800) 1.25 (75,000) 1.52 (91,200)Minimum Feed Flow gpm (lpm) 4.2 (252,000) 4.2 (252,000) 4.2 (252,000) 4.2 (252,000)Maximum Feed Flow gpm (lpm) 6 (360,000) 6 (360,000) 6 (360,000) 6 (360,000)ConnectionsFeed inch 1⁄2" FNPT 1⁄2" FNPT 1⁄2" FNPT 1⁄2" FNPTPermeate inch 3⁄8" TUBING 3⁄8" TUBING 3⁄8" TUBING 3⁄8" TUBINGConcentrate inch 3⁄8" TUBING 3⁄8" TUBING 3⁄8" TUBING 3⁄8" TUBINGMembranesMembrane Per Vessel 1 1 1 1Membrane Quantity 1 2 3 4Membrane Size 2540 2540 2540 2540VesselsVessel Array 1 1:1 1:1:1 1:1:1:1

Vessel Quantity 1 2 3 4PumpsPump Type PLUNGER PLUNGER PLUNGER PLUNGERMotor HP 2.5 2.5 2.5 2.5RPM @ 60 (50 Hz) 1725 (1450) 1725 (1450) 1725 (1450) 1725 (1450)ElectricalStandard Voltage 220VAC 1PH 220VAC 1PH 220VAC 1PH 220VAC 1PH

Voltage Options 220VAC 3PH 220VAC 3PH 220VAC 3PH 220VAC 3PH

Voltage Amp Draw 11.5–12.5 11.5–12.5 11.5–12.5 11.5–12.5Systems Dimensions **L x W x H inch (cm) 48" X 24" X 18.5" 48" X 24" X 18.5" 48" X 24" X 18.5" 48" X 24" X 18.5"

Weight lb. (kg) 145 (65.77) 155 (70.31) 165 (74.84) 175 (79.38)




X2-Series Industrial Reverse Osmosis Systems

X2-4380-60Industrial Reverse Osmosis System


AXEON X2-Series Systems utilize Reverse Osmosis (RO) technology to produce high purity water by reducing contaminants such asdissolved minerals, particulates and organic impurities. AXEON X2 Reverse Osmosis Systems are engineered using the highestquality components and materials for reliable operation and exceptional performance. Our standard systems are available with productwater outputs from 40 – 325 GPM (57,600 – 468,000 GPD).

AXEON X2 Reverse Osmosis Systems are offered with a variety of options such as pre and post treatment equipment, distributionpumps and integrated controls for a complete water treatment solution. AXEON X2 Reverse Osmosis Systems are skid mounted, preplumbed and pre wired allowing for quick installation and start up. A variety of membrane types are available including low energy,brackish and low fouling, nanofiltration and ultrafiltration. Our engineers are available for consultation and to assist you in designingyour next water treatment solution.

The following are just a few of the industrial applications that benefit from the use of an Industrial Membrane System:

� Boiler Feedwater � Small Municipalities � Chemical Manufacturing � Electronics Manufacturing

� Metal Plating and Finishing � Ink and Dye Production � Ice Production Equipment � Food and Beverage Production

� Bottled Water � Deionization Pre-Treatment

Product Overview

X2-6480-115Industrial Reverse Osmosis System

X2-Series Water Purification Systems

Key Features � Over 20 years of Manufacturing Experience

� Conservatively engineered for reliable long term performance

� Factory tested to ensure trouble-free operation

Standard Features � Filmtec® Thin Film Composite Membranes


� Motor Actuated Feed Valve

� Stainless Steel Centrifugal Pump

� SS Filter Housing

� SS High Pressure Components

� Low and high Pressure Shut-Off Switch

� Auto Feed Shut-Off

� Stainless Steel Flow Control

� Feed Pressure Gauges (2)

� System Pressure Gauges (3)

� Cleaning Ports

� Permeate Flowmeter

� Concentrate Flowmeter

� Permeate TDS Display

� Feed TDS Display

� Heavy duty coated carbon steel frame

� S-200 Microprocessor Controller Automatically Controls:

� Motorized Actuated Feed Valve

� Delayed High Pressure Pump Start-Up

� Automatic Shut-Down at Tank Full

� Low or High Pressure Fault Shut-Down

� Pre-Treatment Lock-Out

� Feed Water Flush at Shut-Down

� High Product TDS Alarm Shutdown

� Three Panel Switches For:

� Auxiliary Output Enable or Disable

� RO Pump

� System Power

Optional Equipment � Permeate Flush System

� pH Monitor

� Temperature Gauge

� Float for Storage Tank*

� Chemical Dosing System

� Feed Booster Pump

� Permeate Re-pressurization Pump

� Programmable Logic Controller

� Differential Pressure Gauge

� ORP Monitor Controller

� Turbidity Meter

� Pre-Treatment Equipment:* Carbon Filter, Water Softener, Media Filter

� Crating

* Recommended Minimum Options

Operating Parameters � Operating pressures: 255 psig

(at projected 3 yr. membrane age)

� Minimum system inlet feed pressure: 30 psig

� Operating temperature range: 50 – 80° F. (10 – 27° C.)

� Maximum inlet free chlorine: 0 ppm

� Maximum inlet silt density index (SDI): 3.0

� Standard electrical power: 460 VAC, 3-phase, 60 Hz.

� Nominal system TDS reduction: 95% – 99%

� Nominal system overall recovery rate: 75% – 80%

� Projected performance and operations based on inlet feed of2000 ppm TDS.

Computer projections must be run for individual applications which do not

meet or exceed minimum and maximum operating limits.

Designed with high efficiency Reverse Osmosis membranes, the AXEON X2-Series Systems are able to significantly reduce the totaldissolved solids (TDS) in both municipal and well water sources. Horizontally mounted pressure vessels contain multiple 8" diameter,40" long RO membrane elements capable of producing high volumes of purified water.

Components

� 304 stainless steel skid and frame assembly

� 316 stainless steel pre-filter housing

� 316 stainless steel high pressure piping and valves

� Premium efficient pressure pump motor instrumentation

� Digital inlet feed water pH monitor controller

� Digital inlet feed water ORP monitor controller

� Inlet feed water turbidity monitor

� RO product divert valve

� Touch-screen operator control monitor

RO Product Storage and Distribution Systems

� FRP and HDPE storage tanks with level controls

� Repressurization pumps and controls

Pre-Treatment Systems

� Multi-media filters

� Activated carbon filters

� Water softening systems

� Inlet feed water pH adjustment chemical addition

� Inlet feed water anti-scalant chemical addition

� Inlet feed water dechlorination chemical addition

� Inlet feed water heat exchanger systems

Post-Treatment Systems

� Two-bed and mixed-bed deionization systems

� UV sterilization

� Polishing filter

Membrane Cleaning and Maintenance

� Skid mounted membrane Clean-In-Place (CIP) systems

� RO product water membrane flush system

X2-Series Water Purification Systems

Model Array Vessel Quantity Elements Per VesselX2-3380-40 1:1:1 3 3X2-3480-55 2:1 3 4X2-4480-75 2:1:1 4 4X2-5480-95 2:2:1 5 4X2-6480-115 3:2:1 6 4X2-7480-135 4:3 7 4X2-6680-175 4:2 6 6X2-7680-200 4:3 7 6X2-8680-225 5:3 8 6X2-9680-250 5:4 9 6X2-10680-275 6:4 10 6X2-11680-300 6:5 11 6X2-12680-325 7:5 12 6


System Options

Skid and Frame AssemblyMembrane systems are manufactured in a skid frame designfor ease of installation with minimum floorspace requirements.The AXEON X2 Systems are constructed of welded structuralcarbon steel tubing and finished with corrosion resistantepoxy paint coating. Stainless steel fastener hardware isstandard for corrosion resistance.

Cartridge Pre-Filtration Housing5 Micron prefiltration is standard on all systems. The filterhousing is constructed of 304 stainless steel.

System Pressure PumpStandard pressure pumps are constructed with 304 / 316stainless steel housings, as well as impeller and diffuser stageassemblies. Pumps are equipped with TEFC motors and wiredfor 230 / 460 VAC voltage, and rated for full load,continuous duty.

Membrane HousingsAll systems feature membrane housings constructed offiberglass reinforced polyester (FRP) with 316 stainless steelside-entry feed and concentrate ports. Standard housingshave a white polyurethane finish. ASME code-stamping isavailable on all membrane housings.

InstrumentationAll systems feature a complete instrumentation package foroptimal performance monitoring. Each of the followinginstruments are panel-mounted and pre-wired:

� Pre and Post cartridge filter pressure gauges

� Concentrate pressure gauges

� RO inlet pump discharge pressure switches

� Product and reject electronic flow meters

� Product conductivity monitor

� System temperature indicator

� Pump run hour meter

Membrane ElementsStandard reverse osmosis membrane elements are highrejection, thin-film composite (TFC) type, in a spiral-woundconfiguration. Membrane elements are tested at 99.5%average salt rejection. All Filmtec® pro-rated membraneelements carry a three-year warranty against defects in qualityand workmanship.

System ControlsOperations of the system are automatically controlled througha comprehensive microprocessor controller housed in aNEMA-4 industrial electrical enclosure. The control system alsoincludes a pre-wired motor starter, operator switches,push-buttons, and status alarm indicator lights. Standardsystems include the following isolated alarm conditions:

� Low inlet pressure

� High pump discharge pressure

System Piping and ValvesAll membrane systems are completely pre-plumbed andinstallation ready. Schedule 80 PVC is standard material forall piping and valves under 75 psig operating pressure.Higher pressure piping and valves are constructed of 316stainless steel. The following valves are provided as standard foraccurate flow and pressure control and convenient operation:

� Automatic inlet valve to prevent water flow through the systemduring shutdown

� Pressure pump discharge throttle valve

� RO concentrate and recirculation flow control valves

� Automatic system flush valve for prevention of membrane fouling and scale formation

� Inlet, product, sampling valves

� Individual membrane housing product sampling valves

� Isolation valves and blind ports for use with membranecleaning systems

System Features



150.00"194.00"288.00"

72.00"76.00"

40.00"60.00"


Overall System Dimensions

NOTES: All dimensions and weights are approximate. Systems rated at 77°F (25°C) using 2000 ppm feed water and approx. 225 psi (16 kg/cm²) pressure. System capacity changes significantly with

water temperature and feed TDS. For higher TDS, a water analysis must be supplied and could result in modifications to the system. Chlorine must be removed prior to RO System if present in the feed water.

Water must be pretreated by softener or antiscalant to avoid scaling of the membranes.

X2-3380-40 40 57,600 9 9 2 1-1/2 1-1/2 150 391 40 102 72 183 1,735 787

X2-3480-55 55 79,200 12 12 3 2 2 194 493 60 152 72 183 2,005 910

X2-4480-75 75 108,000 17 16 3 2 2 194 493 60 152 72 183 2,275 1,032

X2-5480-95 95 136,800 22 20 3 3 2 194 493 60 152 72 183 2,645 1,200

X2-6480-115 115 165,600 26 24 4 3 2 194 493 60 152 76 183 2,910 1,320

X2-7480-135 135 194,400 31 28 4 3 2 194 493 60 152 76 183 3,280 1,488

X2-6680-175 175 252,000 40 36 4 3 2 288 732 60 152 76 183 3,795 1,721

X2-7680-200 200 288,000 45 42 4 3 2 288 732 60 152 76 183 5,275 2,393

X2-8680-225 225 324,000 51 48 4 3 2 288 732 60 152 76 183 5,660 2,567

X2-9680-250 250 360,000 57 54 6 4 3 288 732 60 152 76 183 7,140 3,239

X2-10680-275 275 396,000 62 60 6 4 3 288 732 60 152 76 183 8,680 3,937

X2-11680-300 300 432,000 68 66 6 4 3 288 732 60 152 82 208 10,285 4,665

X2-12680-325 325 468,000 74 72 6 4 3 288 732 60 152 82 208 11,890 5,393

Model

CapacityNumber

ofElements*

Line sizes Dimensions Approx. Weight

GPM GPD m3/hr

Inlet(Inches)

Permeate (inches)

Concentrate(inches)

Length Width Heightlb kg

in. cm. in. cm. in. cm.


AXEON CIP-Series Systems are designed to be used with any membrane system in order to clean the membraneswithout removing them from the system. AXEON CIP-Series Systems are provided with hoses and quick disconnectfittings to allow for easy connection to the membrane system.

Features� On/off switch � Stainless steel centrifugal pump � 5 micron cartridge filter � Filter Housings

� Polypropylene For: CIP – 100 – 10� Stainless Steel For: CIP – 200 – 15 to CIP – 500 – 30

� 316 stainless steel gauges � Quick Disconnect Fittings � Temperature Gauge � In-line flow meter � TEFC pump motor � Recycle loop with PVC valve � Solution Tank (polyethylene) with low level tank safe-guard � Flexible braided hose.

Options and Upgrades� Stainless Steel Immersion Heater � Solution Mixer � pH Monitor � Crating

AXEON Membrane Cleaning System Specifications

Cleaning SystemModel

Membrane HousingsCleaned in Parallel

Inlet Outlet(in/cm)

Tank Size(Gals/Lit)

Flow (GPM)

Min Max 60PSI 50PSI

Motor(HP)

Dimensions (in/cm)

Length Width Height

Weight(lb/kg)

CIP-100-10 4 x 4.0" or 1 x 8.0" 1.0 / 3.0 100 / 500 40 50 2 40 60 72 550 / 249

CIP-200-15 6 x 4.0" or 2 x 8.0" 1.5 / 4.0 200 / 760 60 75 5 50 60 72 600 / 270

CIP-200-20 3 x 8.0" 2.0 / 5.0 200 / 760 100 125 5 50 60 72 600 / 270

CIP-500-25 4 x 8.0" 2.5 / 7.0 500 / 1895 150 175 7.5 66 84 72 720 / 325

CIP-500-30 6 x 8.0" 3.0 / 8.0 500 / 1895 220 250 10 66 84 72 790 / 360

CIP-Series Clean In Place Systems



AXEON_MKTF-200_CIP_PB_Page 1

Technology

Membrane systems